SEARCH · Engineering Papers

Results for “Embark”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS1984

An Automated Stall-Speed Warning System

The NASA Dryden Flight Research Facility embarked upon a project with the United States Army Aviation Engineering Flight Activity (USAAEFA) to develop and test a stall-speed warning system. NASA designed and built an automated stall-speed warning system which presents both airspeed and stall speed to the pilot. The airspeed and stall speed are computed in real time by monitoring the basic aerodynamic parameters {dynamic pressure, horizontal and vertical accelerations, and pressure altitude) and other parameters (elevator and flap positions, engine torques, and fuel flow). In addition, an aural warning at predetermined stall margins is presented to the pilot through a voice synthesizer. Once the system was designed and installed in the aircraft, a flight-test program of less than 20 hr was anticipated to determine the stall-speed software coefficients. These coefficients would then be inserted in the system's software and then test flown over a period of about 10 hr for the purposes of evaluation.

Pilot↗

NASA NTRS1983

An Automated Stall-Speed Warning System

The NASA Dryden Flight Research Facility embarked upon a project with the United States Army Aviation Engineering Flight Activity (USAAEFA) to develop and test a stall-speed warning system. NASA designed and built an automated stall-speed warning system which presents both airspeed and stall speed to the pilot. The airspeed and stall speed are computed in real time by monitoring the basic aerodynamic parameters (dynamic pressure, horizontal and vertical accelerations, and pressure altitude) and other parameters (elevator and flap positions, engine torques, and fuel flow). In addition, an aural warning at predetermined stall margins is presented to the pilot through a voice synthesizer. Once the system was designed and installed in the aircraft, a flight-test program of less than 20 hr was anticipated to determine the stall-speed software coefficients. These coefficients would then be inserted in the system's software and then test flown over a period of about 10 hr for the purposes of evaluation.

Dynamic Pressure↗

NASA NTRS1965

Spacecraft Sterilization Technology

Upon the recommendation of the scientific community, the National Aeronautics and Space Administration has established as a major goal the search for extraterrestrial life. So that the data obtained in this search will not be compromised, NASA has embarked on a program designed to prevent external contamination of the planets. This National Conference on Spacecraft Sterilization Technology was convened to bring together for exchange of knowledge those scientists, engineers, and administrators who play a role in spacecraft sterilization technology. Recognizing the rapid accumulation of knowledge in this area of scientific endeavor, it was deemed essential to broadcast this information as rapidly as possible, to establish a firm base upon which newer techniques could be built, and to provide a forum in which differences could be aired and guidelines revised or established.

contamination↗

NASA NTRS1973

Critical land resources inventory using ERTS data

The State of Wisconsin has embarked on a Critical Resources Information Program aimed at defining, establishing the units of measurement, inventorying, and monitoring natural and cultural spatial resource elements which are of statewide or regional significance. This paper presents the results of using ERTS data to inventory certain significant natural resources, such as agricultural land, forests, surface water and wetlands. Computer-generated spatial and statistical comparisons of resource data derived from conventional sources, RB-57 photographs, and ERTS images of Wisconsin suggest that certain resources can be inventoried and monitored on a statewide basis using ERTS images. Preliminary results of data extraction using ERTS digital tapes are also presented. The interpretation of certain natural and cultural resource information from ERTS images is anticipated to be an operational part of Wisconsin's Critical Resources Information Program.

Kiefer, R. W.↗

NASA NTRS1974

Light aircraft crash safety program

NASA is embarked upon research and development tasks aimed at providing the general aviation industry with a reliable crashworthy airframe design technology. The goals of the NASA program are: reliable analytical techniques for predicting the nonlinear behavior of structures; significant design improvements of airframes; and simulated full-scale crash test data. The analytical tools will include both simplified procedures for estimating energy absorption characteristics and more complex computer programs for analysis of general airframe structures under crash loading conditions. The analytical techniques being developed both in-house and under contract are described, and a comparison of some analytical predictions with experimental results is shown.

Thomson, R. G.↗

NASA NTRS1978

The NASA End-to-End Data System program

NASA has embarked on the NASA End-to-End Data System (NEEDS) program, the objective of which is to improve effectiveness and efficiency of NASA's data/information management system. Technology gaps and bottlenecks in the end-to-end system, which encompasses acquiring data, processing it, and converting it to useful information, will be identified. Technology development activities addressing these problem areas will be carried out and new technology will be implemented. Phase I, started in 1977, addresses some very near-term data handling and processing problems with the development of some subsystem components. Phase II, with a late 1978 start, will concentrate on complete subsystems developments to effect near real-time data management. Potential future phases are projected to revolve around the themes of low cost data distribution and a full system demonstration.

Price, R. D.↗

NASA NTRS1981

Technology - The path to the next 50 years

The paper stresses the importance of committing time and resources to space technology based on the premise that an accurate appraisal of the impact of technology and other influences on the present state of aviation will facilitate the planning of space technology. The paper presents the technological advances in aviation since 1903 by dividing the era of aviation into four distinct segments and, by analogy, distinct phases are also seen in the evolution of space flight. One factor seen as limiting advances in space is cost. Processes in space must now be shown to be affordable; a demonstration of technological feasibility is no longer sufficient. For this reason, technology must focus on ensuring the affordability and utility of space processes. A commitment to making space affordable will yield the tools necessary to embark on future space ventures.

Williams, D. P.↗

NASA NTRS1985

Productivity improvement in engineering at Rocketdyne

The Rocketdyne Division of Rockwell International has embarked on a productivity improvement program in engineering. This effort included participation in the White Collar Productivity Improvement (WCPI) project sponsored by the American Productivity Center. A number of things have been learned through this project. It seems that any productivity improvement project should be employee driven. The Rocketdyne project was essentially started as a result of a grassroots effort to remove some particular hindrances, and employee enthusiasm was a prime factor in the continuing progress of the effort. A significant result was that awareness of problems at all levels increased. Many issues surfaced in the diagnostic phase, and were then noted and discussed. This process added legitimacy to issues that had previously been merely unspoken concerns. The initial feelings of many members of the pilot group was that significant changes would occur relatively quickly. It is now recognized that this will have to be an ongoing, long-term effort.

Nordlund, R. M.↗

NASA NTRS1986

Advanced solar dynamic space power systems perspectives, requirements and technology needs

Projected NASA, Civil, Commercial, and Military missions will require space power systems of increased versatility and power levels. The Advanced Solar Dynamic (ASD) Power systems offer the potential for efficient, lightweight, survivable, relatively compact, long-lived space power systems applicable to a wide range of power levels (3 to 300 kWe), and a wide variety of orbits. The successful development of these systems could satisfy the power needs for a wide variety of these projected missions. Thus, the NASA Lewis Research Center has embarked upon an aggressive ASD reserach project under the direction of NASA's Office of Aeronautics and Space Technology (DAST). The project is being implemented through a combination of in-house and contracted efforts. Key elements of this project are missions analysis to determine the power systems requirements, systems analysis to identify the most attractive ASD power systems to meet these requirements, and to guide the technology development efforts, and technology development of key components.

Dustin, M. O.↗

NASA NTRS1987

Antenna pointing systematic error model derivations

The pointing model used to represent and correct systematic errors for the Deep Space Network (DSN) antennas is presented. Analytical expressions are given in both azimuth-elevation (az-el) and hour angle-declination (ha-dec) mounts for RF axis collimation error, encoder offset, nonorthogonality of axes, axis plane tilt, and structural flexure due to gravity loading. While the residual pointing errors (rms) after correction appear to be within the ten percent of the half-power beamwidth criterion commonly set for good pointing accuracy, the DSN has embarked on an extensive pointing improvement and modeling program aiming toward an order of magnitude higher pointing precision.

Guiar, C. N.↗

NASA NTRS1987

Structural design options for the new 34 meter beam waveguide antenna

In addition to the successful network of 34 m High Efficiency antennas recently built by JPL, the Deep Space Network (DSN) is embarking on the construction of a 34 m high performance, research and development antenna with beam waveguide optics at the Venus site. The construction of this antenna presents many engineering challenges in the area of structural, mechanical, RF, and pointing system design. A set of functional and structural design requirements is outlined to guide analysts in the final configuration selection. Five design concepts are presented covering both the conventional center-fed beam optics as well as the nonconventional, by-pass beam configuration. The merits of each concept are discussed with an emphasis on obtaining a homologous design. The preliminary results of structural optimization efforts, currently in progress, are promising, indicating the feasibility of meeting, as a minimum, all X-band (8.4 GHz) requirements, with a goal towards meeting Ka-band (32 GHz) quality performance, at the present budget constraints.

Katow, S.↗

NASA NTRS1987

Supersonic through-flow fan design

The NASA Lewis Research Center has embarked on a program to experimentally prove the concept of a supersonic through-flow fan which is to maintain supersonic velocities throughout the compression system with only weak shock-wave flow losses. The detailed design of a supersonic through-flow fan and estimated off-design performance with the use of advanced computational codes are described. A multistage compressor facility is being modified for the newly designed supersonic through-flow fan and the major aspects of this modification are briefly described.

Schmidt, James F.↗

NASA NTRS1986

Supersonic through-flow fan design

Schmidt, James F.↗

NASA NTRS1987

Magellan attitude and articulation control subsystem closed loop testing

In the spring of 1989, the Magellan spacecraft will embark on a two-year mission to map the surface of the planet Venus. Guiding it there will be the Attitude and Articulation Control Subsystem (AACS). To ensure reliable operations the AACS is being put through a rigorous test program at Martin Marietta Denver Aerospace. Before Magellan ever leaves the Space Shuttle bay from which it is to be launched, its components will have flown a simulated spaceflight in a ground-based lab. The primary objectives of the test program are to verify form, fit, and function of the AACS, particularly subsystem external interfaces and functional operation of the flight software. This paper discusses the Magellan Closed Loop Test Systems which makes realistic tests possible by simulating the dynamic and 'visual' flight environment for AACS components in the lab.

Olschansky, David G.↗

NASA NTRS1988

Microgravity nucleation and particle coagulation experiments support

Researchers at NASA Goddard Space Flight Center have embarked on a program to study the formation and growth of cosmic grains. This includes experiments on the homogeneous nucleation of refractory vapors of materials such as magnesium, lead, tin, and silicon oxides. As part of this program, the Chemical Engineering Department of the University of Virginia has undertaken to develop a math model for these experiments, to assist in the design and construction of the apparatus, and to analyze the data once the experiments have begun. Status Reports 1 and 2 addressed the design of the apparatus and the development of math models for temperature and concentration fields. The bulk of this report discusses the continued refinement of these models, and the assembly and testing of the nucleation chamber along with its ancillary equipment, which began in the spring of 1988.

Lilleleht, L. U.↗

NASA NTRS1989

Launch packaging options for the photovoltaic power module cargo element

The National Aeronautics and Space Administration recently embarked on the Space Station Freedom program, which will utilize the Shuttle Orbiter for transportation to orbit. This task will be accomplished with a number of flights over several years. Each flight is unique in terms of the hardware that is manifested and the method by which it is integrated to form viable cargo elements. Work Package 4 is responsible for the electric power system for Space Station Freedom, and was delegated the authority to develop a photovoltaic (PV) power module cargo element. The PV power module consists of several unique assemblies. The first of these is the combined solar array/beta gimbal assembly. The remaining assemblies form the single combined integrated equipment assembly for each PV power module. These three combined assemblies are packaged into a launch cradle to form the PV power module cargo element, which is placed in the cargo bay of the Shuttle Orbiter for transportation to orbit. Various constraints determine the packaging options for the three PV power module combined assemblies. The size and shape of the combined assemblies in relation to the Shuttle Orbiter cargo bay dimensions and other manifested hardware are ultimately a factor in determining the acceptable packaging schemes for the PV power module cargo element. Several packaging options for the PV power module cargo element are presented. These options are discussed in terms of their impact on the overall flight hardware manifest as determined by the various constraints.

Hoberecht, Mark A.↗

NASA NTRS1989

The Viking biology results

A brief review of the purposes and the results from the Viking Biology experiments is presented, in the expectation that the lessons learned from this mission will be useful in planning future approaches to the biological exploration of Mars. Since so little was then known about potential micro-environments on Mars, three different experiments were included in the Viking mission, each one based on different assumptions about what Martian organisms might be like. In addition to the Viking Biology Instrument (VBI), important corollary information was obtained from the Viking lander imaging system and from the molecular analysis experiments that were conducted using the gas chromatograph-mass spectrometer (GCMS) instrument. No biological objects were noted by the lander imaging instrument. The GCMS did not detect any organic compounds. A description of the tests conducted by the Gas Exchange Experiment, the Labeled Release experiment, and the Pyrolytic Release experiment is given. Results are discussed. Taken as a whole, the Viking data yielded no unequivocal evidence for a Martian biota at either landing site. The results also revealed the presence of one or more reactive oxidants in the surface material and these need to be further characterized, as does the range of micro-environments, before embarking upon future searches for extant life on Mars.

Klein, Harold P.↗

NASA NTRS1988

The US space station and its electric power system

The United States has embarked on a major development program to have a space station operating in low earth orbit by the mid-1990s. This endeavor draws on the talents of NASA and most of the aerospace firms in the U.S. Plans are being pursued to include the participation of Canada, Japan, and the European Space Agency in the space station. From the start of the program these was a focus on the utilization of the space station for science, technology, and commercial endeavors. These requirements were utilized in the design of the station and manifest themselves in: pressurized volume; crew time; power availability and level of power; external payload accommodations; microgravity levels; servicing facilities; and the ability to grow and evolve the space station to meet future needs. President Reagan directed NASA to develop a permanently manned space station in his 1984 State of the Union message. Since then the definition phase was completed and the development phase initiated. A major subsystem of the space station is its 75 kW electric power system. The electric power system has characteristics similar to those of terrestrial power systems. Routine maintenance and replacement of failed equipment must be accomplished safely and easily and in a minimum time while providing reliable power to users. Because of the very high value placed on crew time it is essential that the power system operate in an autonomous mode to minimize crew time required. The power system design must also easily accommodate growth as the power demands by users are expected to grow. An overview of the U.S. space station is provided with special emphasis on its electrical power system.

Thomas, Ronald L.↗