Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electronic transport”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Electronic transport in VO 2 —Experimentally calibrated Boltzmann transport modeling

Materials that undergo metal-insulator transitions (MITs) are under intense study because the transition is scientifically fascinating and technologically promising for various applications. Among these materials, VO 2 has served as a prototype due to its favorable transition temperature. While the physical underpinnings of the transition have been heavily investigated experimentally and computationally, quantitative modeling of electronic transport in the two phases has yet to be undertaken. In this work, we establish a density-functional-theory (DFT)-based approach to model electronic transport properties in VO 2 in the semiconducting and metallic regimes, focusing on band transport using the Boltzmann transport equations. To do so, we synthesized high quality VO 2 films and measured the transport quantities across the transition, in order to calibrate the free parameters in the model. We find that the experimental calibration of the Hubbard correction term can efficiently and adequately model the metallic and semiconducting phases, allowing for further computational design of MIT materials for desirable transport properties.

36 MATERIALS SCIENCE↗

Electron transport and electron energy distributions within the wurtzite and zinc-blende phases of indium nitride: Response to the application of a constant and uniform electric field

Within the framework of an ensemble semi-classical three-valley Monte Carlo electron transport simulation approach, we critically contrast the nature of the electron transport that occurs within the wurtzite and zinc-blende phases of indium nitride in response to the application of a constant and uniform electric field. We use the electron energy distribution and its relationship with the electron transport characteristics in order to pursue this analysis. For the case of zinc-blende indium nitride, only a peak corresponding to the electrons within the lowest energy conduction band valley is observed, this peak being seen to broaden and shift to higher energies in response to increases in the applied electric field strength, negligible amounts of upper energy conduction band valley occupancy being observed. In contrast, for the case of wurtzite indium nitride, in addition to the aforementioned lowest energy conduction band valley peak in the electron energy distribution, and its broadening and shifting to higher energies in response to increases in the applied electric field strength, beyond a certain critical electric field strength, 30 kV/cm for the case of this particular material, upper energy conduction band valley occupancy is observed, this occupancy being further enhanced in response to further increases in the applied electric field strength. Reasons for these results are provided. The potential for device consequences is then commented upon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic Transport in Lithiated Iron and Bismuth Fluoride

Metal networks are formed during the lithiation of metal fluorides. Previous reports indicate that these networks are bi-continuous with the possibility to support electronic transport, though no quantitative analysis has been performed. In this study, thin films of FeF 2 and BiF 3 were chemically lithiated using n-butyllithium to form these metal networks. Direct current (DC) polarization and electrochemical impedance spectroscopy (EIS) were utilized to find electronic conductivity and results were compared to their pure metals. Here, the results indicate films to have higher than expected conductivity value which indicates that these metal networks support electronic transport during lithiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modified Monte Carlo method for study of electron transport in degenerate electron gas in the presence of electron–electron interactions, application to graphene

Standard computational methods used to take account of the Pauli Exclusion Principle into Monte Carlo (MC) simulations of electron transport in semiconductors may give unphysical results in low field regime, where obtained electron distribution function takes values exceeding unity. Modified algorithms were already proposed and allow to correctly account for electron scattering on phonons or impurities. Present paper extends this approach and proposes improved simulation scheme allowing including Pauli exclusion principle for electron–electron (e–e) scattering into MC simulations. Simulations with significantly reduced computational cost recreate correct values of the electron distribution function. Proposed algorithm is applied to study transport properties of degenerate electrons in graphene with e–e interactions. This required adapting the treatment of e–e scattering in the case of linear band dispersion relation. Hence, this part of the simulation algorithm is described in details.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Multiparametric AFM Insights into Electron Transport Mechanisms in Biomemristors

Biomemristors have attracted significant attention due to their applications in biodegradable and flexible electronic devices, and their prospective functions in information storage, neural synapses, and neuromorphic computation. Hence, understanding biomaterials' resistive switching (RS) mechanism is essential to design novel biomemristors with enhanced performance. In the last decade, various atomic force microscopy (AFM) modes, such as Kelvin probe force microscopy (KPFM) and conductive atomic force microscopy (cAFM), in situ/operando visualize the electron transport behaviors within biomemristors at the nanoscale. This review provides a comprehensive discussion of multiparametric AFM techniques to characterize biomemristors and inspire new ideas in developing next-generation consumer electronics. We also summarize the progress of revealing the internal mechanism of biomemristors with functional AFM to visualize and understand the switching behavior. Finally, the opportunities and challenges of further utilizing multiparametric AFM to explore the electron transport mechanisms in biomemristors are presented.

Shi, Chenyang↗

Distribution of tunnelling times for quantum electron transport

In electron transport, the tunnelling time is the time taken for an electron to tunnel out of a system after it has tunnelled in. We define the tunnelling time distribution for quantum processes in a dissipative environment and develop a practical approach for calculating it, where the environment is described by the general Markovian master equation. We illustrate the theory by using the rate equation to compute the tunnelling time distribution for electron transport through a molecular junction. The tunnelling time distribution is exponential, which indicates that Markovian quantum tunnelling is a Poissonian statistical process. The tunnelling time distribution is used not only to study the quantum statistics of tunnelling along the average electric current but also to analyse extreme quantum events where an electron jumps against the applied voltage bias. The average tunnelling time shows distinctly different temperature dependence for p- and n-type molecular junctions and therefore provides a sensitive tool to probe the alignment of molecular orbitals relative to the electrode Fermi energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlation between Electron Transport and Shear Alfven Activity in the National Spherical Torus Experiment

We report the observation of a correlation between shear Alfven eigenmode activity and electron transport in plasma regimes where the electron temperature gradient is flat, and thus the drive for temperature gradient microinstabilities is absent. Plasmas having rapid central electron transport show intense, broadband global Alfven eigenmode (GAE) activity in the 0.5-1.1 MHz range, while plasmas with low transport are essentially GAE-free. The first theoretical assessment of a GAE-electron transport connection indicates that overlapping modes can resonantly couple to the bulk thermal electrons and induce their stochastic diffusion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural, magnetic, and electron transport properties of MnBi:Fe thin films

The structural, magnetic, and electron transport properties of Mn{sub 55-x}Fe{sub x}Bi{sub 45} (x = 0, 2, 4, 5, 8, 11, 13, 16) films prepared by multilayer deposition and annealing using e-beam evaporation have been investigated. Fe doping has produced a significant change in the magnetic properties of the samples including the decrease in saturation magnetization and magnetocrystalline anisotropy and increase in coercivity. Although the magnetization shows a smooth decrease with increasing Fe concentration, the coercivity jumps abruptly from 8.5 kOe to 22 kOe as Fe content changes from 4% to 5%, but the change in coercivity is small as the concentration goes beyond 5%. The temperature dependence of resistivity shows that the samples with low Fe concentration ({<=}4%) are metallic, but the resistivity increases unexpectedly as the concentration reaches 5%, where the resistance increases with decreasing temperature below 300 K. First-principle calculations suggest that the observed magnetic properties can be understood as the consequences of competing ferromagnetic and antiferromagnetic exchange interactions between the interstitial atom and the rest of the MnBi lattice.

36 MATERIALS SCIENCE↗

Comparison of Computational Strategies for the Calculation of the Electronic Coupling in Intermolecular Energy and Electron Transport Processes

Electronic couplings in intermolecular electron and energy transfer processes calculated by six different existing computational techniques are compared to nonorthogonal configuration interaction for fragments (NOCI-F) results. The paper addresses the calculation of the electronic coupling in diketopyrrolopyrol, tetracene, 5,5'-difluoroindigo, and benzene–Cl for hole and electron transport, as well as the local exciton and singlet fission coupling. NOCI-F provides a rigorous computational scheme to calculate these couplings, but its computational cost is rather elevated. The here-considered ab initio Frenkel–Davydov (AIFD), Dimer projection (DIPRO), transition dipole moment coupling, Michl–Smith, effective Hamiltonian, and Mulliken–Hush approaches are computationally less demanding, and the comparison with the NOCI-F results shows that the NOCI-F results in the couplings for hole and electron transport are rather accurately predicted by the more approximate schemes but that the NOCI-F exciton transfer and singlet fission couplings are more difficult to reproduce.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrated simulations of implosion, electron transport, and heating for direct-drive fast-ignition targets

A thorough understanding of future integrated fast-ignition experiments combining compression and heating of high-density thermonuclear fuel requires hybrid (fluid+particle) simulations of the implosion and ignition process. Different spatial and temporal scales need to be resolved to model the entire fast-ignition experiment. The two-dimensional (2D) axisymmetric hydrocode DRACO[P. B. Radha et al., Phys. Plasmas 12, 056307 (2005)] and the 2D/three-dimensional hybrid particle-in-cell code LSP[D. R. Welch et al., Nucl. Instrum. Methods Phys. Res. A 464, 134 (2001)] have been integrated to simulate the implosion and heating of direct-drive, fast-ignition fusion targets. DRACO includes the physics required to simulate compression, ignition, and burn of fast-ignition targets. LSP simulates the transport of hot electrons from the place where they are generated to the dense fuel core where their energy is absorbed. The results from integrated simulations of cone-in-shell CD targets designed for fast-ignition experiments on OMEGA [T. R. Boehly et al., Opt. Commun. 133, 495 (1997); C. Stoeckl et al., Fusion Sci. Technol. 49, 367 (2006)] are presented. Target heating and neutron yields are computed. The results from LSP simulations of electron transport in solid-density plastic targets are also presented. They confirm an increase in the electron divergence angle with the laser intensity in the current experiments. The self-generated resistive magnetic field is found to collimate the hot-electron beam and increase the coupling efficiency of hot electrons with the target. Resistive filamentation of the hot-electron beam is also observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

n–Doping of a Low–Electron–Affinity Polymer Used as an Electron–Transport Layer in Organic Light–Emitting Diodes

n-Doping electron-transport layers (ETLs) increases their conductivity and improves electron injection into organic light-emitting diodes (OLEDs). Because of the low electron affinity and large bandgaps of ETLs used in green and blue OLEDs, n-doping has been notoriously more difficult for these materials. In this work, n-doping of the polymer poly[(9,9-dioctylfluorene-2,7-diyl)-alt-(benzo[2,1,3]thiadiazol-4,7-diyl)] (F8BT) is demonstrated via solution processing, using the air-stable n-dopant (pentamethylcyclopentadienyl)(1,3,5-trimethylbenzene)ruthenium dimer [RuCp*Mes] 2 . Undoped and doped F8BT films are characterized using ultraviolet and inverse photoelectron spectroscopy. The ionization energy and electron affinity of the undoped F8BT are found to be 5.8 and 2.8 eV, respectively. Upon doping F8BT with [RuCp*Mes] 2 , the Fermi level shifts to within 0.25 eV of the F8BT lowest unoccupied molecular orbital, which is indicative of n-doping. Conductivity measurements reveal a four orders of magnitude increase in the conductivity upon doping and irradiation with ultraviolet light. Here, the [RuCp*Mes] 2 -doped F8BT films are incorporated as an ETL into phosphorescent green OLEDs, and the luminance is improved by three orders of magnitude when compared to identical devices with an undoped F8BT ETL.

36 MATERIALS SCIENCE↗

Electron transport in unipolar InGaN/GaN multiple quantum well structures grown by NH{sub 3} molecular beam epitaxy

Unipolar-light emitting diode like structures were grown by NH{sub 3} molecular beam epitaxy on c plane (0001) GaN on sapphire templates. Studies were performed to experimentally examine the effect of random alloy fluctuations on electron transport through quantum well active regions. These unipolar structures served as a test vehicle to test our 2D model of the effect of compositional fluctuations on polarization-induced barriers. Variables that were systematically studied included varying quantum well number from 0 to 5, well thickness of 1.5 nm, 3 nm, and 4.5 nm, and well compositions of In{sub 0.14}Ga{sub 0.86}N and In{sub 0.19}Ga{sub 0.81}N. Diode-like current voltage behavior was clearly observed due to the polarization-induced conduction band barrier in the quantum well region. Increasing quantum well width and number were shown to have a significant impact on increasing the turn-on voltage of each device. Temperature dependent IV measurements clearly revealed the dominant effect of thermionic behavior for temperatures from room temperature and above. Atom probe tomography was used to directly analyze parameters of the alloy fluctuations in the quantum wells including amplitude and length scale of compositional variation. A drift diffusion Schrödinger Poisson method accounting for two dimensional indium fluctuations (both in the growth direction and within the wells) was used to correctly model the turn-on voltages of the devices as compared to traditional 1D simulation models.

77 NANOSCIENCE AND NANOTECHNOLOGY↗