Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electric field effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Electric field effect in superconductor-ferroelectric structures

Electric field effect (the E-effect) in superconductors has been studied since 1960 when Glover and Sherill published their results on a shift of the critical temperature T(sub c) about 0.1 mK in Sn and In thin films under the action Off the field E=300 kV/cm. Stadler was the first to study the effect or spontaneous polarization of ferroelectric substrate on the electric properties of superconductors. He observed that the reversal of polarization of TGS substrate under action of external electric field in Sn-TGS structures induced the T(sub c) shift in Sn about 1.3 mK. Since in this case the effect is determined not by the electric field but by the spontaneous polarization, we may call this effect the P-effect. High-T(sub c) superconductors opened the new possibilities to study the E- and P-effects due to low charge carrier density, as compared to conventional superconductors, and to anomalously small coherence length. Experiments in this field began in many laboratories but a breakthrough was made where a shift in T(sub c) by 50 mK was observed in YBCO thin films. Much higher effects were observed in subsequent studies. The first experiments on the P-effect in high-T(sub c) superconductors were reported elsewhere. In this report we shall give a short description of study on the P-effect in high-T(sub c) superconductors.

Lemanov, V. V.↗
NASA NTRS2009

Electric Field Effects on Fiber Alignment Using an Auxiliary Electrode During Electrospinning

Control of electrospun fiber placement and distribution was investigated by examining the effect of electric field parameters on the electrospinning of fibers. The experimental set-up used in this study eliminated the bending instability and whipping, allowing the jet to be modeled as a stable trajectory. Coupling of experimental and computational results suggests the potential for predicting aligned fiber distribution in electrospun mats.

Carnell, Lisa S.↗
NASA NTRS1994

Electric field effects on a near-critical fluid in microgravity

The effects of an electric field on a sample of SF6 fluid in the vicinity of the liquid-vapor critical point is studied. The isothermal increase of the density of a near-critical sample as a function of the applied electric field was measured. In agreement with theory, this electrostriction effect diverges near the critical point as the isothermal compressibility diverges. Also as expected, turning on the electric field in the presence of density gradients can induce flow within the fluid, in a way analogous to turning on gravity. These effects were observed in a microgravity environment by using the Critical Point Facility which flew onboard the Space Shuttle Columbia in July 1994 as part of the Second International Microgravity Laboratory Mission. Both visual and interferometric images of two separate sample cells were obtained by means of video downlink. The interferometric images provided quantitative information about the density distribution throughout the sample. The electric field was generated by applying 500 Volts to a fine wire passing through the critical fluid.

Zimmerli, G.↗
DOE OSTI2023

Effective electric field: Quantifying the sensitivity of searches for new -odd physics with EuCl 3 ∙ 6H 2 O

Laboratory-scale precision experiments are a promising approach to searching for physics beyond the standard model. Noncentrosymmetric solids offer favorable statistical sensitivity for efforts that search for new fields, whose interactions violate the discrete parity and time-reversal symmetries. One example is the cosmic axion spin precession experiment (CASPEr), which can be sensitive to the defining interaction of the quantum chromodynamics (QCD) axion dark matter with gluons in atomic nuclei. The effective electric field is the parameter that quantifies the sensitivity of such experiments to new physics. We describe the theoretical approach to calculating the effective electric field for noncentrosymmetric sites in ionic insulating solids. We consider the specific example of the crystal, which is a particularly promising material. The optimistic estimate of the effective electric field for the isotope in this crystal is . The calculation uncertainty is estimated to be two orders of magnitude, dominated by the evaluation of the europium nuclear Schiff moment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2007

Electric Field Effects on Fiber Alignment Using an Auxiliary Electrode during Electrospinning

This viewgraph presentation reviews auxiliary and electric field effects on fiber alignment during the process of electrospinning. The contents include: 1) Electrospinning Overview; 2) Experimental Set-up; 3) Jet Exit; 4) Auxiliary Electrode Effects; 5) Electrospinning High Speed Video; 6) Effect of Auxiliary Electrode Position; 7) Micro & Nano Fibers Produced; 8) Micro and Nano Fibrous Mats; 9) Field Effect on Fiber Distribution; 10) Modeling; 11) Calculated trajectories: 5, 10, 15 & 20cm electrode spacing; 12) Off Axis Auxiliary Electrode; 13) Field Strength Effects; and 14) Potential Applications.

Carnell, Lisa S.↗
NASA NTRS1988

Penetrating of high-latitude-electric-field effects to low latitudes during SUNDIAL 1984

Electric-field-penetration events have been identified using F-region vertical-drift measurements obtained in the October 6-13, 1984 period by the Jicamarcan incoherent-backscatter radar and corresponding h-prime F measurements from ionosondes at Fortaleza, Cachoeira Paulista, and Dakar. Predictions made using the Rice Convection Model for the pattern, strength, and duration of the low-latitude electric field occurring in response to an increasing high-latitude convection agree with observations. The observed 1-2 h duration of the low-latitude response to decreased convection can be explained by the fossil-wind theory of Richmond (1983).

Spiro, R. W.↗
NASA NTRS1986

Convection electric field effects on outer radiation belt electron precipitation

A model is presented for the possible diurnal modulation of outer radiation belt electron precipitation by considering the effect of the convection electric field on geomagnetically trapped electrons. The modulation flux is the flux due to electrons in the drift loss cone, i.e., those which drift into the bounce loss cone. The electron flux in the drift loss cone is related to the time allowable for diffusion from the stably trapped population to the drift loss cone for precipitation at a specific geographic location. This time, which is termed the maximum L-shell lifetime, is obtained by computing electron trajectories, using a realistic magnetic field model and a simple model for the electric field. The maximum L-shell lifetimes are taken to be the times between successive entries into the bounce loss cone. Conservation of the first two adiabatic invariants, as electrons are slowly energized by the convection electric field, leads to variations in pitch angle, maximum L-shell lifetimes, and, consequently, to changes in the electron flux in the drift loss cone. These results are compared with observations of precipitating electrons made with sounding rocket payloads.

Gelpi, C.↗
DOE OSTI2023

Tunable phase structure in NaNbO 3 ceramics by grain-size effect, electric field and heat treatment

Large polarization and strain change during antiferroelectric - ferroelectric phase transition under electric field is the foundation for realizing excellent electrical properties in antiferroelectric ceramics, therefore, the adjustment of antiferroelectricity and clarification of the corresponding mechanism is the foundation for controlling electrical properties. NaNbO3 is the most complex perovskite system showing multiple antiferroelectric phases in a wide temperature range, in which the antiferroelectricity shows obvious instability with changing external and internal conditions, namely the antiferroelectric phase can be adjusted by grain-size effect, electric field and heat treatment. According to the systematical study in terms of the Rietveld refinement of synchrotron XRD and Raman, NaNbO3 exhibits a ferrielectric P21ma structure at room temperature, the ferroelectric component of which increases with decreasing grain size. Two antiferroelectric tetragonal phases exist around Curie temperature TC before the entrance of antiferroelectric R phase zone, while an antiferroelectric monoclinic phase, which can be maintained to room temperature by annealing treatment, acts as the bridge for the depolarization of the poled NaNbO3 with ferroelectric Q phase. A detailed phase diagram mainly focused on the antiferroelectric phase zones of NaNbO3 is plotted, which gives a clear understanding about the polymorphic phase transitions under different conditions. Finally, the results concluded in this work would give a clear guidance for designing high-performance NaNbO3-based lead-free ceramics from the point of structure.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Local Electric Field Effects on Water Dissociation in Bipolar Membranes Studied Using Core–Shell Catalysts

The local electric field strength is thought to affect the rate of water dissociation (WD) in bipolar membranes (BPMs) at the catalyst–nanoparticle surfaces. Here, we study core–shell nanoparticles, where the core is metallic, semiconducting, or insulating, to understand this effect. The nanoparticle cores were coated with a WD catalyst layer (TiO2 or HfO2) via atomic layer deposition (ALD), and the morphology was imaged with transmission electron microscopy. Irrespective of the core material, these core–shell catalysts displayed comparable WD overpotentials at optimal mass loading, despite the hypothesized differences in the electric field strength across the catalyst particle suggested by continuum electrostatic simulations. Substantial atomic interdiffusion between the core and shell was ruled out by X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, and diffuse reflectance optical measurements. However, the optimal mass loading of catalyst was roughly 1 order of magnitude higher for the conductive and high dielectric core materials than for the low dielectric insulating cores. These findings are consistent with the hypothesis that electric field screening within the core material focuses the electric field drop between particles such that larger film thicknesses can be tolerated. Collectively, these data support the idea that it is the local electric field at the molecular level that controls proton-transfer rates and that the metal core/dielectric-shell constructs introduced here modulate that field. Further materials and synthetic design may enable optimization of the electric field strength across the proton-transfer trajectory at the material surface.

Sarma, Prasad V↗
NASA NTRS2003

Electric Field Effects in Self-Propagating High-Temperature Synthesis under Microgravity Conditions

Self-propagating high-temperature synthesis (SHS) has been used to form many materials. SHS generally involves mixing reactants together (e.g., metal powders) and igniting the mixture such that a combustion (deflagration) wave passes though the mixture. The imposition of an electric field (AC or DC) across SHS reactants has been shown to have a marked effect on the dynamics of wave propagation and on the nature, composition, and homogeneity of the product . The use of an electric field with SHS has been termed "field-assisted SHS". Combustion wave velocities and temperatures are directly affected by the field, which is typically perpendicular to the average wave velocity. The degree of activation by the field (e.g., combustion rate) is related to the current density distribution within the sample, and is therefore related to the temperature-dependent spatial distribution of the effective electrical conductivity of reactants and products. Furthermore, the field can influence other important SHS-related phenomena including capillary flow, mass-transport in porous media, and Marangoni flows. These phenomena are influenced by gravity in conventional SHS processes (i.e., without electric fields). As a result the influence of the field on SHS under reduced gravity is expected to be different than under normal gravity. It is also known that heat loss rates from samples, which can depend significantly on gravity, can influence final products in SHS. This research program is focused on studying field-assisted SHS under reduced gravity conditions. The broad objective of this research program is to understand the role of an electric field in SHS reactions under conditions where gravity-related effects are suppressed. The research will allow increased understanding of fundamental aspects of field-assisted SHS processes as well as synthesis of materials that cannot be formed in normal gravity.

Unuvar, C.↗
DOE OSTI2023

Electric Field Effects on Water and Ion Structure and Diffusion at the Orthoclase (001)–Water Interface

Understanding the electrochemical properties of mineral–water interfaces tends to rely upon electrical double layer (EDL) models, but these models are based on the assumption that electrostatic equilibrium is constantly maintained. In reality, interfacial reactions, ion diffusion, and their electrochemical signatures are based in nonequilibrium conditions of locally or globally imbalanced electrical fields where current EDL models have limited purview. In this work, we performed molecular dynamics (MD) simulations of the orthoclase (001) surface in contact with a 1 M NaCl aqueous solution under various electric fields, to explore the interplay between EDL structure and dynamics when perturbed by electric fields of different direction and strength, by confinement, and by different distributions of structural surface charge. The simulations showed that confinement between two opposing (001) surfaces led to the development of an induced field when the applied field was perpendicular to the surfaces and, as a result, to ionic diffusion coefficients that were independent of electric field strength. In contrast, when the applied field was parallel to the surfaces, confinement resulted in ionic diffusion coefficients that were more strongly dependent on the magnitude of the electric field than in bulk water. Differences in the density and distribution of aluminol groups on the two surfaces had a significant impact on how the interfacial structure and dynamics varied in the presence of an electric field. Notably, these differences resulted in an electro-osmotic flow with opposite directions at the two surfaces under parallel applied electric field. Overall, the MD simulations highlighted the importance of considering atomic-level structure and heterogeneities when developing models of the electrochemical properties of mineral–water interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1980

Electric field effects on galactic cosmic rays at the heliosphere boundary

The boundary condition for galactic cosmic rays at the outer edge of the modulation region was examined. With few exceptions authors have in the past uncritically used a time-independent, spherically-symmetric condition. It was found that, depending on the mechanism by which the heliospheric magnetic field connects to the general galactic magnetic field, the induced electric field may have important effects on the boundary condition. Sample calculations are presented which illustrate the potentially large, nonspherically-symmetric effects which may be expected.

Jokipii, J. R.↗