Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EUROPIUM ISOTOPES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Positive parity states and some electromagnetic transition properties of even-odd europium isotopes

The positive-parity low-spin states of even-odd Europium isotopes ({sup 151-155}Eu) were studied within the framework of the interacting boson-fermion model. The calculated positive low-spin state energy spectra of the odd Eu isotope were found to agree quite well with the experimental data. The B(E2) values were also calculated and it was found that the calculated positive-parity low-spin state energy spectra of the odd-A Eu isotopes agree quite well with the experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Non-Aqueous Reduction Process for Purifying 153Gd Produced in Natural Europium Targets

Gadolinium-153 is a low-energy gamma-emitter used in nuclear medicine imaging quality assurance. Produced in nuclear reactors using natural Eu2O3 targets, 153Gd is radiochemically separated from europium isotopes by europium reduction. However, conventional aqueous europium reduction produces hydrogen gas, a flammability hazard in radiological hot cells. We altered the traditional reduction method, using methanol as the process solvent to nearly eliminate hydrogen gas production. This new, non-aqueous reduction process demonstrates greater than 98% europium removal and gadolinium yields of 90%.

Gd-153↗

Static and Dynamic Contributions to the Splitting of the Eu{sup 2+} Ground State in SrMoO{sub 4}

The EPR spectrum of an Eu{sup 2+} impurity center in a SrMoO{sub 4} single crystal in the temperature range T = 1.8, 111–300 K has been studied, and the temperature changes in the spin Hamiltonian parameters describing the EPR spectrum of odd europium isotopes have been determined. It is shown that small temperature changes in the diagonal parameters of the spin Hamiltonian (for odd Eu{sup 2+} isotopes) b{sub 2}{sup 0}(T) = b{sub 2}(F) + b{sub 2}(L) and P{sub 2}{sup 0}(T) = P{sub 2}(F) + P{sub 2}(L) are explained by the compensation of spin–phonon contributions b{sub 2}(F) and P{sub 2}(F) by the contributions of the lattice thermal expansion b{sub 2}(L) and P{sub 2}(L). The quantities b{sub 2}(L) and P{sub 2}(L) that are dependent on the static lattice parameters at a given temperature, are estimated in terms of the superposition Newman model. Then, the spin–phonon b{sub 2}(F) and P{sub 2}(F) contributions determined by the lattice ion vibrations are separated. An analysis shows that b{sub 2}{sup 0}(F) and P{sub 2}{sup 0}(F) > 0, b{sub 2}(L) and P{sub 2}(L) < 0, and the temperature behavior of the spin–phonon contribution is well described by G. Pfister’s model of local vibrations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Discovery of samarium, europium, gadolinium, and terbium isotopes

Currently, thirty-four samarium, thirty-four europium, thirty-one gadolinium, and thirty-one terbium isotopes have been observed and the discovery of these isotopes is described here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.

07 ISOTOPE AND RADIATION SOURCES↗

Nuclear Data Sheets for A = 133

Evaluated nuclear structure and decay data for all nuclei within the A=133 mass chain are presented. The experimental data are evaluated and best values for level and gamma-ray energies, quantum numbers, lifetimes, gamma-ray intensities, and other nuclear properties are recommended. Inconsistencies and discrepancies that exist in the literature are noted. This work supersedes the earlier evaluation by S. Raab (1995Ra12), published in Nuclear Data Sheets75, 491 (1995).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Magnetic ordering of divalent europium in double perovskites Eu{sub 2}LnTaO{sub 6} (Ln=rare earths)

Structures and magnetic properties of double perovskite-type oxides Eu{sub 2}LnTaO{sub 6} (Ln=Eu, Dy-Lu) were investigated. These compounds adopt a distorted double perovskite structure with space group P2{sub 1}/n. Magnetic susceptibility, specific heat, and {sup 151}Eu Moessbauer spectrum measurements show that the Eu{sup 2+} ions at the 12-coordinate sites of the perovskite structure are antiferromagnetically ordered at {approx}4 K, and that Ln{sup 3+} ions at the 6-coordinate site are in the paramagnetic state down to 1.8 K. - Graphical abstract: Magnetic properties of double perovskite-type oxides Eu{sub 2}LnTaO{sub 6} (Ln=Eu, Dy-Lu) were investigated. Magnetic susceptibility, specific heat, and {sup 151}Eu Moessbauer spectrum measurements show that the Eu{sup 2+} ions at the 12-coordinate sites of the perovskite structure are antiferromagnetically ordered at {approx}4 K. Highlights: > Crystal structures of double perovskites Eu{sub 2}LnTaO{sub 6} (Ln=rare earth) were determined. > We found that these compounds show an antiferromagnetic ordering at {approx}4 K. > The magnetic ordering is due to the interactions of Eu{sup 2+} ions. > It was elucidated by specific heat and {sup 151}Eu Moessbauer spectrum measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of Terbium Isotopes Yield in Irradiation of {sup 151}Eu Targets by {sup 3}He Nuclei

This article is devoted to obtaining the α-emitter {sup 149}Tb for radioimmunotherapy. A method for producing {sup 149}Tb based on the reaction {sup 151}Eu({sup 3}He, 5n){sup 149}Tb is proposed. It is proposed that europium with native isotopic composition ({sup 151}Eu – 47.81%, {sup 153}Eu – 52.19%) or enriched {sup 151}Eu be used as the target. The 29 MeV threshold of the indicated reaction makes it possible to use accelerators with the initial {sup 3}He energy 40–70 MeV.

07 ISOTOPE AND RADIATION SOURCES↗

ASSESSMENT OF THE RADIONUCLIDE COMPOSITION OF "HOT PARTICLES" SAMPLED IN THE CHERNOBYL NUCLEAR POWER PLANT FOURTH REACTOR UNIT

Fuel-containing materials sampled from within the Chernobyl Nuclear Power Plant (ChNPP) 4th Reactor Unit Confinement Shelter were spectroscopically studied for gamma and alpha content. Isotopic ratios for cesium, europium, plutonium, americium, and curium were identified and the fuel burnup in these samples was determined. A systematic deviation in the burnup values based on the cesium isotopes, in comparison with other radionuclides, was observed. The conducted studies were the first ever performed to demonstrate the presence of significant quantities of {sup 242}Cm and {sup 243}Cm. It was determined that there was a systematic underestimation of activities of transuranic radionuclides in fuel samples from inside of the ChNPP Confinement Shelter, starting from {sup 241}Am (and going higher), in comparison with the theoretical calculations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Reactor Fuel Isotopics and Code Validation for Nuclear Applications

Experimentally measured isotopic concentrations of well characterized spent nuclear fuel (SNF) samples have been collected and analyzed by previous researchers. These sets of experimental data have been used extensively to validate the accuracy of depletion code predictions for given sets of burnups, initial enrichments, and varying power histories for different reactor types. The purpose of this report is to present the diversity of data in a concise manner and summarize the current accuracy of depletion modeling. All calculations performed for this report were done using the Oak Ridge Isotope GENeration (ORIGEN) code, an internationally used irradiation and decay code solver within the SCALE comprehensive modeling and simulation code. The diversity of data given in this report includes key actinides, stable fission products, and radioactive fission products. In general, when using the current ENDF/B-VII.0 nuclear data libraries in SCALE, the major actinides are predicted to within 5% of the measured values. Large improvements were seen for several of the curium isotopes when using improved cross section data found in evaluated nuclear data file ENDF/B-VII.0 as compared to ENDF/B-V-based results. The impact of the flux spectrum on the plutonium isotope concentrations as a function of burnup was also shown. The general accuracy noted for the actinide samples for reactor types with burnups greater than 5,000 MWd/MTU was not observed for the low-burnup Hanford B samples. More work is needed in understanding these large discrepancies. The stable neodymium and samarium isotopes were predicted to within a few percent of the measured values. Large improvements were seen in prediction for a few of the samarium isotopes when using the ENDF/B-VII.0 libraries compared to results obtained with ENDF/B-V libraries. Very accurate predictions were obtained for 133 Cs and 153 Eu. However, the predicted values for the stable ruthenium and rhodium isotopes varied as much as 10% of the measured values, and 109 Ag was consistently over-predicted by as much as 170%. In general, there is a larger uncertainty for modeling radioactive fission products when compared to either the actinides or the stable fission products in SNF. The relative C/E ratios ranged from a few percent for 137 Cs up to 60% and 100% for 106 Ru and 125 Sb, respectively. Limited or no radioactive fission products data exist in the current data sets for reactor types other than PWRs and BWRs. More work is needed in obtaining a greater diversity of radioactive fission product data. While performing this survey, issues leading to inconsistencies in nuclear fission yield data were discovered that specifically impacted the fission product noble gases. Emphasis was given to this legacy data, and corrective actions were taken as described in this report. After the fission yield data were corrected, the stable xenon and krypton fission products were predicted to within 5% of their measurements. However, preliminary results not explicitly given in this report indicate that the relative C/E ratio for the radioactive isotope 85 Kr varied as much as 10%. Due to the complex migration and the difficulty in measuring noble gases in the fuel, a more thorough investigation is needed to understand how accurately depletion codes can calculate these gas concentrations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Selective Detection of Diglycolamide Diastereomers By Metal-Ligand Cluster Formation

Introduction (120 words): Differentiation of isomers using mass spectrometry is a challenge, as these species tend to produce ions of identical mass-to-charge ratio. Therefore, separation with mass spectrometry must rely on chemical differences between isomeric species. Separation of stereoisomers is especially challenging, as these species often have very similar chemistry. However, recent investigations of the solvent extraction behavior of diastereomers of diglycolamide molecules have shown that different stereoisomers can have significantly different lanthanide extraction efficiencies. These studies showed that the R,S stereoisomer of 2,2'-oxybis(N,N-dioctylpropanamide efficiently extracts lanthanides, while the S,S stereoisomer does not. Thus, gas-phase metal complexation may provide a pathway for differentiating these species using mass spectrometry. Methods (120 words): Europium, samarium, and holmium clusters with the R,S, and the S,S diastereomers of 2,2'-oxybis(N,N-didecylpropanamide (trivially tetradecyl diglycolamide, or mTDDGA) were generated in gas-phase using the electrospray ionization source of a Bruker (Billerica, MA, USA) micrOTOF-Q II quadrupole time-of-flight mass spectrometer. Solutions of aqueous lanthanide nitrate and diglycolamide ligands in 2-propanol were added to 50%:50% by volume acetonitrile:2-propanol to generate the spray solutions. Ligand concentration was maintained at approximately 6 µM, while lanthanide concentration was maintained at either 6 µM or 30 µM . High resolution, high mass accuracy spectra were recorded using the time-of-flight. Mass accuracy was ensured using external calibration with Agilent (Santa Clara, CA, USA) ESI-L Low Concentration tuning mix. Preliminary data (300 words): Electrospray of solutions containing only R,S-mTDDGA or S,S-m-TDDGA yield abundant peaks at m/z= 721.7, corresponding to [mTDDGA+H]+1, m/z = 743.7, corresponding to [mTDDGA+Na]+1, and m/z = 1464.4, corresponding to the sodium-bound dimer, [Na(mTDDGA)2]+1. Spray of solutions containing 6 µM europium (Eu) with 3 µM R,S-mTDDGA produced an abundant cluster ion with an isotopic envelope centered at m/z=772.0, corresponding to [Eu(R,S-mTDDGA)3]3+. Europium-containing cluster ions with isotopic envelopes apexing at m/z = 1012.3 and 1189.0 correspond to the [Eu(R,S-mTDDGA)4]3+ and [Eu(R,S-mTDDGA)5]3+ cluster ions, respectively. Protonated and sodiated R,S-mTDDGA are present as well, along with the sodium-bound dimer. In contrast, spray of solutions containing 6 µM europium (Eu) with 3 µM S,S-mTDDGA diastereomer yielded only protonated and sodiated ligand ions; no Eu- S,S-mTDDGA ions were present. This mirrors the solution-phase behavior, where the S,S diestereomer extracts lanthanides with significantly less efficiency than the R,S diestereomer. Experiments with holmium and samarium yielded the same results. Increasing the lanthanide concentration to 30 µM resulted in limited formation of lanthanide-S,S-mTDDGA clusters. However, the abundance of the [Ln(S,S-mTDDGA)3]3+ clusters remained low compared to the abundance of the protonated and sodiated ligand. Additionally, the abundance of the [Ln(R,S-mTDDGA)3]3+ cluster ion was significantly higher than that of the protonated and sodiated ligand in experiments with spray solutions containing 30 µM lanthanide with R,S-mTDDA, supporting the hypothesis that R,S-mTDDGA has a higher intrinsic affinity for the lanthanides than S,S-mTDDGA. Thus, the intrinsic complexation with lanthanides appears to offer a route to differentiate diglycolamide diestereomers in the gas-phase. Novelty (20): Stereoisomers can be differentiated in the gas phase by exploitation of differences in metal complexation chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Estimation of Fission Product Transport Parameters for Cesium in the AGR-3/4 TRISO Fuel Experiment

A one-dimensional (1D) finite-element model of fission product transport in the AGR-3/4 experiment has been developed using the Multiphysics Object Oriented Simulation Environment (MOOSE) framework and implemented in the fuel performance code, BISON. The model resolves capsule-specific geometries, materials, and temperature histories and simulates radial migration of fission products from the fuel compact through the inner ring, outer ring, and into the sink ring. Model parameters governing diffusion and sorption were estimated for key fission products – cesium (Cs), and europium (Eu) – by simultaneously fitting modeled isotopic concentration profiles and total ring inventories to a post-irradiation experimental measurement. These data include gamma scanning, liquid scintillation for Sr-90, radial deconsolidation leach-burn-leach analysis, tomographic reconstructions, and destructive physical sampling. A mortar-based interfacial sorption framework was implemented to enforce physically consistent mass transfer and flux conservation across gas gaps. Two classes of parameter sets were derived: a least-squares best-fit, and a safety-oriented conservative-fit, what applies strong penalties for underprediction of sink inventories. Across all twelve capsules, the model successfully reproduces the dominant radial transport trends for Cs, Sr, with decreasing concentrations from the compact outward through successive rings. Cs behavior is captured most consistently, while strontium predictions reveal systematic trade-offs between compact accuracy and conservative sink-ring bounding. The results demonstrate that sink ring weighted calibration provides conservative, safety relevant bounds on low temperature fission product transport, but at the cost of underpredicting compact inventories for Sr isotopes. These discrepancies highlight the need for additional physics, including fast-slow diffusion model, incorporating trapping mechanism in the transport behavior. Overall, this work establishes a robust, capsule-specific modeling framework for AGR-3/4 fission product transport and provides a defensible basis for parameter selection in source-term and fuel performance analyses for high temperature gas-cooled reactors.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Partitioning of Eu and Sr between coexisting plagioclase and K-feldspar.

Minerals were separated by an EM approach and with the aid of liquids of great density. An analysis of K, Rb, Ca, Sr, Ha, and rare earth elements was conducted by means of a mass spectrometer isotope dilution technique. The behavior of the divalent europium ions during the partition process was found to be very similar to that of divalent strontium ions, taking into consideration data of the partition coefficients between coexisting feldspars in acidic rocks.

Nagasawa, H.↗

Paramagnetic Ions in Distorted Perovskite YAlO{sub 3} Doped with Europium

In crystals of yttrium orthoaluminate doped with the {sup 151}Eu isotope, Eu{sup 2+}, Cr{sup 3+}, Gd{sup 3+}, and Мо{sup 3+} paramagnetic centers are detected. The fine structure parameters of the spin Hamiltonian are determined or refined for these centers. The orientation behavior of previously unobserved forbidden transitions is considered for the Cr{sup 3+} centers. It is shown that two Mo{sup 3+} signals that are detected in magnetic fields directed parallel to the crystallographic axes do not belong to different molybdenum centers, but are two intradoublet transitions of the same center.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Assembly and Delivery of Capsules for Irradiation of Absorber Material Specimens in the High Flux Isotope Reactor

This report provides a summary of the thermal analysis, test matrix, and assembly of two capsules containing absorber material specimens. Four different absorber materials are inserted in the same capsule: hafnium carbide, hafnium carbide with a molybdenum silicide additive, samarium hafnate, and europium hafnate. The two capsules are planned for irradiation in the flux trap of the High Flux Isotope Reactor at two different neutron fluence levels and with a target specimen temperature of 300°C. In addition, this report shows the pre-characterization performed on the absorber material specimens. The goal of this experiment is to investigate the neutron irradiation effects on the absorber materials and characterize irradiation-induced swelling.

36 MATERIALS SCIENCE↗

International inter-comparison exercise on $${}^{153}\hbox {Sm}$$153Sm

Samarium-153 ( 153 Sm) is one of the many isotopes of interest to the nuclear forensics community. This short-lived radionuclide decays to stable europium-153 via beta emission, with subsequent de-excitation via gamma emission and internal conversion. Historical measurements of 153 Sm by gamma spectrometry and beta liquid scintillation counting have shown a low bias compared to beta proportional counting. In order to investigate this, four national laboratories jointly conducted an experimental inter-comparison exercise on a certified 153Sm sample, created from neutron activation of samarium-152. Radiometric measurements were conducted using gamma spectrometry, liquid scintillation, gas proportional counting, and passivated implanted planar silicon detectors and compared across the four institutions against the certificate. The results from this experiment are presented together with a number of conclusions which suggest that the current published cumulative fission yield for 153 Sm, as used by many laboratories, is approximately 15% high and is the likely cause of the previously observed historical bias.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Estimation of Sorption Behavior of Europium onto Ca-Al-Si Hydrate by Fluorescence Analysis - 19222

As a nuclide migration evaluation in the radioactive waste disposal system, the sorption behaviors of Eu, which is a multivalent metal ion, onto Ca-Al-Si hydrates (including Ca-Si hydrates) were examined in this study. In the sorption experiments, Ca-Al-Si hydrates were handled without drying process in consideration of saturated groundwater environment. The sorption behaviors of Eu onto Ca-Al-Si hydrate with various combinations of Ca/Si molar ratio and Al/Si molar ratio were monitored by using the Ca, Al, Si and Eu concentrations, the fluorescence emission spectrum and the fluorescence lifetime. In addition, the structural changes of Ca-Al-Si hydrates by Eu were evaluated by Raman spectrum measurement. In the results, the fluorescence lifetimes of most samples remarkably exceeded that of Eu(OH){sub 3}. This suggests that Eu ions are immobilized by not only Ca-Si hydrates but also Ca-Al-Si hydrates. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Analysis of burnup and isotopic compositions of BWR 9 x 9 UO{sub 2} fuel assemblies

In order to extend isotopic composition data focusing on fission product nuclides, measurements are progressing using facilities of JAEA for five samples taken from high burnup BWR 9 x 9 UO{sub 2} fuel assemblies. Neutronics analysis with an infinite assembly model was applied to the preliminary measurement data using a continuous-energy Monte Carlo burnup calculation code MVP-BURN with nuclear libraries based on JENDL-3.3 and JENDL-4.0. The burnups of the samples were determined to be 28.0, 39.3, 56.6, 68.1, and 64.0 GWd/t by the Nd-148 method. They were compared with those calculated using node-average irradiation histories of power and in-channel void fractions which were taken from the plant data. The comparison results showed that the deviations of the calculated burnups from the measurements were -4 to 3%. It was confirmed that adopting the nuclear data library based on JENDL-4.0 reduced the deviations of the calculated isotopic compositions from the measurements for {sup 238}Pu, {sup 144}Nd, {sup 145}Nd, {sup 146}Nd, {sup 148}Nd, {sup 134}Cs, {sup 154}Eu, {sup 152}Sm, {sup 154}Gd, and {sup 157}Gd. On the other hand, the effect of the revision in the nuclear. data library on the neutronics analysis was not significant for major U and Pu isotopes. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗