SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Initial kinetic energy dependence of reaction energy distribution between direct ion-molecule reaction products internal and translational modes from crossed beam experiments
Abstract We compare two-moment-based energy-dependent and three variants of energy-integrated neutrino transport general-relativistic magnetohydrodynamics simulations of a hypermassive neutron star. To study the impacts due to the choice of the neutrino transport schemes, we perform simulations with the same setups and input neutrino microphysics. We show that the main differences between energy-dependent and energy-integrated neutrino transport are found in the disk and ejecta properties, as well as in the neutrino signals. The properties of the disk surrounding the neutron star and the ejecta in energy-dependent transport are very different from the ones obtained using energy-integrated schemes. Specifically, in the energy-dependent case, the disk is more neutron-rich at early times and becomes geometrically thicker at later times. In addition, the ejecta is more massive and, on average, more neutron-rich in the energy-dependent simulations. Moreover, the average neutrino energies and luminosities are about 30% higher. Energy-dependent neutrino transport is necessary if one wants to better model the neutrino signals and matter outflows from neutron star merger remnants via numerical simulations.
In the effective-potential description for low-energy scattering involving a spinless complex (a body with internal structure), the nonadiabatic corrections are sometimes disguised in momentum-dependent terms. These are distinct from energy-dependent corrections. A general procedure is given here by which all the momentum-dependent corrections can be converted into nonadiabatic corrections in truly local form. Circumstances under which an expansion of the effective potential, in terms of the adiabatic term plus nonadiabatic and energy-dependent corrections is allowed and forbidden, are discussed. An example for the latter is in the case of near degeneracy in the spectrum of the complex or in the extrapolation of the effective potential to short-distance behavior. This indicates that certain claims of 'saturation effect' at short distances in low-energy electron-atom scattering are invalid.
Cadmium Arsenide (Cd3As2) is a prototypical Dirac semimetal that manifests topological properties in a 3D bulk material. In defect-free Cd3As2, the Fermi level lies at a minimum in the density of states at the Dirac point, but experimentally it forms with excess electron carriers and an elevated EF, thereby masking the topological features. To computationally study the self-doping of Cd3As2, we combine density functional theory (DFT) calculations for defect formation energies with quasi-particle self-consistent GW (QSGW) electronic structure calculations. We demonstrate an innate dependence of the point defect formation energies on carrier concentrations and use the QSGW calculated density of states to extrapolate formation energies to arbitrary electron concentrations. This approach allows the quantitative modeling of thermodynamic defect equilibria in topological semimetals and is used to predict how Cd3As2 growth conditions affect the position of EF relative to the Dirac point.
Time-dependent heliospheric cosmic-ray modulation for the period 1985-1989 is simulated by means of a time-dependent axially symmetric drift model with an emulated wavy heliospheric neutral sheet (HNS). The model is used to extend previous calculations to other energies in order to study a possible energy-dependence of the onset of new modulation at various radial distances in 1987. The model, with the outward propagating changes of the HNS as the only time-dependent parameters, is found to predict essentially no energy-dependence in the time when new modulation started in the simulated 1987. When a more practical approach in defining 'constant' modulation in 1987 is followed, the present calculations can be interpreted to indicate that the end of the recovery period in 1987 happened progressively earlier and the onset of new modulation progressively later the higher the rigidity of the cosmic rays. This period of relatively unchanged modulation is predicted to last longer with increasing radial distance.
John B. Goodenough proposed that interfacial electron transfer kinetics from main group metal oxides should be fundamentally different from that of transition metal oxides, an expectation that has not been widely tested. Herein, the kinetics for interfacial electron transfer from mesoporous transparent conductive oxide Tin-doped Indium Oxide (ITO) to four photoredox catalysts (PCs) were characterized in acetonitrile electrolytes. The photocatalysts had the form: [Ru(4,4ʹ-R 2 -2,2′-bipyridine) 2 (4,4ʹ-(PO 3 H 2 ) 2 -2,2′-bipyridine)] 2+ , where R was H, methoxy, tert -butyl, and Br. The impact of the surface binding group was characterized with [Ru(2,2′-bipyridine) 2 (4,4ʹ-(CO 2 H) 2 -bpy)] 2+ . The interfacial electron transfer reaction ITO(e − )∣PC + → ITO∣PC was quantified by nanosecond absorption spectroscopy as a function of the applied potential (and hence ‒Δ G °). Specific conditions of applied potential were identified where the kinetics were sensitive to the incident irradiance. A layer-by-layer method was used to insert ionic methylene bridge(s) between the PC and the oxide surface. Marcus-Gerischer analysis of the kinetic data indicates non-adiabatic interfacial electron transfer with total reorganization energies that increase when bridges were placed between the photocatalyst and the ITO surface.
The time-dependent cosmic-ray transport equation is solved numerically in an axially symmetric heliosphere. Gradient and curvature drifts are incorporated, together with an emulated wavy neutral sheet. This model is used to simulate heliospheric cosmic-ray modulation for the period 1985-1989 during which drifts are considered to be important. The general energy dependence of the modulation of Galactic protons is studied as predicted by the model for the energy range 1 MeV to 10 GeV. The corresponding instantaneous radial and latitudinal gradients are calculated, and it is found that, whereas the latitudinal gradients follow the trends in the waviness of the neutral sheet to a large extent for all energies, the radial gradients below about 200 MeV deviate from this general pattern. In particular, these gradients increase when the waviness decreases for the simulated period 1985-1987.3, after which they again follow the neutral sheet by increasing rapidly.
The interstellar propagation of cosmic rays is investigated using current 'best estimates' for the partial and total cross sections and their energy dependence and the current model of solar modulation. The experimental boron to carbon ratio is reproduced if the mean of the path length distribution decreases with decreasing energy below approximately 1 GeV/nucleon. This energy dependence is compared to shock acceleration models and dynamical halo models using different galactic wind velocities.
As we prepare for lower neutrino energy beams where physics is highly energy-dependent, it is important to isolate factors that can contribute largely to these low energy neutrino experiments. The world of neutrino oscillation experiments uses a wide range of energies: from 0.7 GeV beam of T2K and MicroBooNE, 2 GeV beam of NOvA, to the 0.6 to 6.0 GeV beam produced by DUNE in the future. MINERvA’s data are currently the best place to test the upper end of the range for DUNE and can be extrapolated into both DUNE’s and NOvA’s oscillation maximum. The goal of the research is to constrain energy dependence in the neutrino scattering experiment using data from MINERvA and then determine what factors contribute to the observed energy dependence. The research is divided into two parts. First, I will analyze different theoretical models in different channels of interaction, such as the quasi-elastic and delta resonance channels, in terms of neutrino energy dependence. The goal is to study the models at the level of the structure functions, which emphasizes the W2 structure function (the C function for QE) dominates the MINERvA data, but the W3 is increasingly important for NOvA and DUNE. The second half of the research is data-driven and focuses on the different detectors and systematic effects. An experimental effect, the angle acceptance, is larger than the structure function effects. However, it is a detector geometry effect and is well measured and well modeled. Other effects such as the muon energy scale are small and localized. Additionally, the research will determine if the MINERvA GENIE model correctly predicts all of the energy dependence seen in the data, and identify the remaining unmodeled energy dependence between the MINERvA data and its best simulation.
This thesis is on the intrinsic energy dependence in neutrino-nucleus interaction models, especially quasielastic scattering and 2p2h process, and the implications for understanding data from MINERvA, NOvA, and DUNE. Neutrino-nucleus interactions are modeled using fve structure functions, W1, W2, W3, W4 and W5, and each structure function contributes diferently to the energy dependence once it enters the cross-section calculations. The energy independent term in the calculations contains only W2 and the next lower order term (of the order 1/E) contains W3 also. In this thesis, we show that W2 is good enough to describe MINERvA data and energy dependence coming from the cross-section directly is small. However, W3 will be signifcant for lower energy experiments such as NOvA and DUNE (especially at and below the oscillation maximum). We have also developed a method to extract structure functions directly from MINERvA data though we find that systematic uncertainties present in the data are too big to successfully determine 1/E Term. In addition to this, we have applied muon angle cuts on MINERvA data and MC, which have their own energy dependent effects. An apparent energy dependent discrepancy comes from known shortcomings especially in the pion production model. Finally, because the energy dependence analysis has similarities to the low-$\nu$ method, we have evaluated discrepancies between the data and MC in light of diferent fux constraint techniques. The results suggest including MINERvA s low-$\nu$ method constraint is an improvement.
Precise dissection of cells with ultrashort laser pulses requires a clear understanding of how the onset and extent of ablation (i.e., the removal of material) depends on pulse energy. We carried out a systematic study of the energy dependence of the plasma-mediated ablation of fluorescently-labeled subcellular structures in the cytoskeleton and nuclei of fixed endothelial cells using femtosecond, near-infrared laser pulses focused through a high-numerical aperture objective lens (1.4 NA). We find that the energy threshold for photobleaching lies between 0.9 and 1.7 nJ. By comparing the changes in fluorescence with the actual material loss determined by electron microscopy, we find that the threshold for true material ablation is about 20% higher than the photobleaching threshold. This information makes it possible to use the fluorescence to determine the onset of true material ablation without resorting to electron microscopy. We confirm the precision of this technique by severing a single microtubule without disrupting the neighboring microtubules, less than 1 micrometer away. c2005 Optical Society of America.
The energy dependence of the secondary to primary ratios in the Cosmic Rays can be explained by a model accounting for the scattering of the particles by self-generated Alfven waves. This model predicts an energy-dependent truncation of the pathlength distribution.
To date, most analysis of neutron time-of-flight data from inertial confinement fusion experiments has focused on the relatively small range of energies corresponding to the primary neutrons from DD and DT fusion, and have therefore employed instrument response functions (IRF’s) corresponding to monoenergetic 2.45-MeV or 14.03-MeV neutrons. For analysis of time-of-flight signals corresponding to broader ranges of neutron energies, accurate treatment of the data requires the use of an energy-dependent IRF. Here, this work describes interpolation of the IRF for neutrons of arbitrary energy, construction of an energy-dependent IRF, and application of this IRF in a forward fit via matrix multiplication. As an example of the application of this method, an analysis of synthetic data relevant to TT fusion experiments at the Omega Laser Facility is discussed. This example is used to illustrate the differences between a forward fit that uses an energy-dependent IRF and a forward fit that uses a monoenergetic IRF. Use of the energy-dependent IRF is shown to result in accurate inference of the fit parameters of interest.
The relation between the energy-dependent particle and wave descriptions of electron–matter interactions on the nanoscale was analyzed by measuring the delocalization of an evanescent field from energy-filtered amplitude images of sample/vacuum interfaces with a special aberration-corrected electron microscope. The spatial field extension coincided with the energy-dependent self-coherence length of propagating wave packets that obeyed the time-dependent Schrödinger equation, and underwent a Goos–Hänchen shift. The findings support the view that wave packets are created by self-interferences during coherent–inelastic Coulomb interactions with a decoherence phase close to Δφ = 0.5 rad. Due to a strictly reciprocal dependence on energy, the wave packets shrink below atomic dimensions for electron energy losses beyond 1000 eV, and thus appear particle-like. Consequently, our observations inevitably include pulse-like wave propagations that stimulate structural dynamics in nanomaterials at any electron energy loss, which can be exploited to unravel time-dependent structure–function relationships on the nanoscale.
In this article, we perform energy-dependent calculations of independent and cumulative fission product yields for 235 U, 238 U, and 239 Pu in the first chance fission region. Starting with the primary fission fragment distributions taken from available experimental data and analytical functions based on assumptions for the excitation energy and spin-parity distributions, the Hauser-Feshbach statistical decay treatment for fission fragment de-excitation is applied to more than 1,000 fission fragments for the incident neutron energies up to 5 MeV. The calculated independent yields are then used as an input of β-decay calculations to produce the cumulative yield, and summation calculations are performed. Model parameters in these procedures are adjusted by applying the Bayesian technique at the thermal energy for 235 U and 239 Pu and in the fast energy range for 238 U. The calculated fission observable quantities, such as the energy-dependent cumulative yields, and prompt and delayed neutron yields, are compared with available experimental data. We also study the possible impact of the second chance fission opening on the energy dependence of the delayed neutron yield by on the opening of second chance fission on the energy dependence calculation.
In the frame work of energy dependent confinement for cosmic rays, the energy spectrum inside the source is flatter than that observed. Antiproton observation suggests large amount of matter is being traversed by cosmic rays in some sources. As a result, secondary particles are produced in abundance. Their spectra was calculated and it is shown that the energy dependent confinement model is in conflict with some observations.
Energy dependence of electron damage in silicon