Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EMISSION SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Stratospheric HBr mixing ratio obtained from far infrared emission spectra

Emission features of HBr isotopes have been identified in high-resolution FIR emission spectra obtained with a balloon-borne Fourier-transform spectrometer in the spring of 1979 at 32 deg N latitude. When six single-scan spectra at a zenith angle of 93.2 deg were averaged, two features of HBr isotopes at 50.054 and 50.069/cm were obtained with a signal-to-noise ratio of 2.5. The volume mixing ratio retrieved from the average spectrum is 2.0 x 10 to the -11th, which is assumed to be constant above 28 km, with an uncertainty of 35 percent. This stratospheric amount of HBr is about the same as the current level of tropospheric organic bromine compounds, 25 pptv. Thus HBr could be the major stratospheric bromine species.

Park, J. H.↗

High-resolution studies of atmospheric IR emission spectra

Atmospheric emission spectra obtained with two different spectrometer systems are presented. The first system (the BOMEM Michelson interferometer) is designed for emission work. Spectra were obtained under adverse conditions in the Antarctic, and are still of good absolute accuracy. The second system (a modified Bruker Instruments IFS120 very high spectral resolution interferometer) demonstrates the sensitivity that can be achieved even at higher spectral resolution. This system shows that mid-IR atmospheric emission spectra can be obtained with a good SNR in a reasonable length of time at a relatively high resolution. A properly designed high resolution system should achieve high accuracy, sensitivity, and resolution, thereby permitting measurements of many atmospheric constituents when solar spectra cannot be obtained.

Murcray, F. J.↗

Using Anharmonic PAH Vibrational Spectra to Simulate Fully Anharmonic Cascade Emission Spectra

In recent years, we have developed vibrational second-order perturbation theory (VPT2) approaches that can be applied to very large molecules, such as polycyclic aromatic hydrocarbon (PAH) molecules. One of the main difficulties in applying standard VPT2 methods to PAHs is the large number of Fermi resonances that occur, especially in the C-H stretching region of the infrared spectrum. In order to properly account for these resonances, it is necessary to set up resonance polyads for each irreducible representation of the symmetry point group to which the molecule belongs, and for specific wavenumber regions, such as the C-H stretching region. Diagonalization of the polyads allows us to determine vibrational band positions, the intensity sharing due to the resonances, and hence there will be many more vibrational bands present than there are C-H bonds. Using these data, a library of fully anharmonic temperature-dependent spectra, with proper treatment of polyad resonances, can be determined and subsequently used to model the cascade emission spectra of PAH molecules – the type of spectra directly observed by astronomers. The theoretical approach will be described, with comparison to experiment where possible, and the latest fully anharmonic PAH cascade emission spectra will be discussed.

Timothy J Lee↗

C-H Hot Bands in the Near-IR Emission Spectra of Leonids

The reported infrared (IR) emission spectra from 1999 Leonid fireballs show a 3.4 micron C-H emission band and unidentified bands at longer wavelengths. Upon atmospheric entry, the Leonid meteorites were flash-heated to temperatures around 2400K, which would destroy any organics on the surface of the meteorite grains. We propose that the nu(sub )CH emission band in the Leonid emission spectra arises from matrix-embedded C(sub n)-H-O entities that are protected from instant pyrolysis. Our model is based on IR absorption nu(sub )CH bands, which we observed in laboratory-grown MgO and natural olivine single crystals, where they arise from C(sub n)-H-O units imbedded in the mineral matrix, indicative of aliphatic -CH2- and -CH3 organics. Instead of being pyrolyzed, the C(sub n)-H-O entities in the Leonid trails become vibrationally excited to higher levels n = 1, 2, 3 etc. During de-excitation they emit at 3.4 microns, due to the (0 => 1) transition, and at longer wavelengths, due to hot bands. As a first step toward verifying this hypothesis we measured the C-H vibrational manifold of hexane (C6H14). The calculated positions of the (2 => l ) , (3 => 2), and possibly (4 => 3) hot bands agree with the Leonid emission bands at 3.5, 3.8 and 4.l microns.

Freund, F. T.↗

Substrate birefringence as a source of artifacts in spintronic THz emission spectra

Terahertz (THz) emission from spintronic THz emitters (STEs) has been extensively studied, both for its potential application in THz technologies and as a tool for probing spin dynamics, conductivity, and crystal anisotropy via time-domain THz spectroscopy. However, substrate birefringence can modify the emitted THz polarization, distorting the measured spectra and leading to potential misinterpretation of the results. While some aspects of substrate birefringence on THz emission have been studied in the time domain, its effects on THz spectra have not been discussed in detail. In the THz emission spectrum from STEs, we observe distinct spectral signatures that depend on sample orientation. To understand these signatures, we use STEs grown on c-cut sapphire and systematically vary the orientation of a (100) rutile TiO 2 window in both pump-through and THz-through geometries to identify the birefringence-induced effects. These findings demonstrate that substrate birefringence plays a critical role in the emitted THz spectrum and must be carefully considered in the analysis of time-domain THz spectroscopy data. We also show that artifacts from smaller birefringence can have a more misleading effect on the THz spectra.

Shrestha, Shreya [Univ. of Delaware, Newark, DE (U↗

Detection of climate forcing using emission spectra

We discuss the use of thermal emission spectra recorded by satellites to construct climate indices that can detect the evolution of a specific climate forcing in a time series. The two important issues are selectivity against climate forcings other than one that is sought, and sensitivity to the required forcing. We show that indices with selectivity can be found, and that their sensitivity can be high.

Thermal Emission Spectra↗

A Significant Increase in Detection of High-resolution Emission Spectra Using a Three-dimensional Atmospheric Model of a Hot Jupiter

High-resolution spectroscopy has opened the way for new, detailed study of exoplanet atmospheres. There is evidence that this technique can be sensitive to the complex, three-dimensional (3D) atmospheric structure of these planets. In this work, we perform cross-correlation analysis of high-resolution (R ∼ 100,000) CRIRES/VLT emission spectra of the hot Jupiter HD 209458b. We generate template emission spectra from a 3D atmospheric circulation model of the planet, accounting for temperature structure and atmospheric motions—winds and planetary rotation—missed by spectra calculated from one-dimensional models. In this first-of-its-kind analysis, we find that using template spectra generated from a 3D model produces a more significant detection (6.9σ) of the planet’s signal than any of the hundreds of one-dimensional models we tested (maximum of 5.1σ). We recover the planet’s thermal emission, its orbital motion, and the presence of CO in its atmosphere at high significance. Additionally, we analyzed the relative influences of 3D temperature and chemical structures in this improved detection, including the contributions from CO and H{sub 2}O, as well as the role of atmospheric Doppler signatures from winds and rotation. This work shows that the hot Jupiter’s 3D atmospheric structure has a first-order influence on its emission spectra at high resolution and motivates the use of multidimensional atmospheric models in high-resolution spectral analysis.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Infrared emission spectra from operating elastohydrodynamic sliding contacts

Infrared emission spectra from an operating EHD sliding contact were obtained through a diamond window for an aromatic polymer solute present in equal concentration in four different fluids. Three different temperature ranges, three different loads, and three different speeds for every load were examined. Very sensitive Fourier spectrophotometric (Interferometric) techniques were employed. Band Intensities and band intensity ratios found to depend both on the operating parameters and on the fluid. Fluid film and metal surface temperatures were calculated from the spectra and their dependence on the mechanical parameters plotted. The difference between these temperatures could be plotted against shear rate on one curve for all fluids. However, at the same shear rate the difference between bulk fluid temperature and diamond window temperature was much higher for one of the fluids, a traction fluid, than for the others.

Lauer, J. L.↗

Retrieval of constituent mixing ratios from limb thermal emission spectra

An onion-peeling iterative, least-squares relaxation method to retrieve mixing ratio profiles from limb thermal emission spectra is presented. The method has been tested on synthetic data, containing various amounts of added random noise for O3, HNO3, and N2O. The retrieval method is used to obtain O3 and HNO3 mixing ratio profiles from high-resolution thermal emission spectra. Results of the retrievals compare favorably with those obtained previously.

Shaffer, William A.↗

Modeling of the EUV and X-Ray Emission Spectra Induced by the Solar Winds Ions in the Heliosphere

We have carried out investigation of the EUV and X-ray emission spectra induced in interaction between the Solar Wind (SW) and interstellar neutral gas. The spectra of most important SW ions have been computed for the charge-exchange mechanism of X-ray emission using new accurate spectroscopic data from recent laboratory measurements and theoretical calculations. Total spectra have been constructed as a sum of spectra induced in the charge-exchange collisions by individual O(exp q+), C(exp q+), N(exp q+), Ne(exp q+), Mg (exp q+) and Fe(exp q+) ions. Calculations have been performed for X-ray emission from the heliospheric hydrogen and helium gas. X-ray maps of the heliosphere have been computed. The power density of X-ray sources in the heliospheric ecliptic plane is shown for the H gas and for the He gas. Distances from the Sun (0,0) are given in AU. The helium cone is clear seen in the X-ray map of the charge-exchange emission induced by the solar wind. X-ray emission spectra detected by the Chandra X-ray telescope from the "dark" side of Moon has been identified as a X-ray background emission induced by the solar wind from the geocorona. Spectra and intensities of this charge-exchange X-rays have been compared with the heliospheric component of the X-ray background. Observations and modeling of the SW spectra induced from the geocorona indicate a strong presence of emission lines of highly charged oxygen ions. Anisotropy in distribution of heliospheric X-rays has been predicted and calculated for the regions of the fast and slow solar winds.

Kharchenko, Vasili↗

Simulated infrared emission spectra of highly excited polyatomic molecules: a detailed model of the PAH-UIR hypothesis

A detailed description of the polycyclic aromatic hydrocarbon (PAH)/unidentified infrared band (UIR) mechanism is presented in which experimental spectral bandshape functions are used to simulate IR emission spectra for individual molecules. These spectra are additively superimposed to produce a conglomerate spectrum representative of a family of PAH molecules. Ab initio vibrational frequencies and intensities for nine PAHs (neutral and cationic) as large as ovalene are used in conjunction with measured bandshape and temperature-dependent redshift data to simulate the UIR bands. The calculated spectra of cations provide a closer match to the UIRs than do those of the neutrals. However, the PAH cations used in the simulations fail to reproduce the details of the UIR emission spectra. The discrepancies are potentially alleviated if both larger PAHs and a greater number of PAHs were included in the simulation.

Non-NASA Center↗

Kβ X-ray Emission Spectra Analysis Using Bayesian Optimization

The Kβ X-ray emission spectrum of 3 d transition metals is rich with electronic and structural information due to strong exchange interactions with the valence shell of the metal, and has become crucial for understanding their spin and oxidation states. The spectrum is commonly treated using crystal-field multiplet theory, a semi-empirical theory that uses tunable parameters to control the strength of the effects present in X-ray emission spectroscopy (XES). However, determining the experimental values of these parameters remains a challenge. We present a methodology that applies Bayesian optimization to crystal-field multiplet theory to determine parameter values. The algorithm is tested on the X-ray emission spectra of a collection of Mn, Co, and Ni oxides. We are able to find optimal values for the four most impactful parameters: Slater−Condon reduction factors F dd , F pd , and G pd , and crystal field splitting 10 Dq . The algorithm produces significantly improved accuracy compared to current analysis methods, and probes interparameter dependencies by modeling the error landscape. This advancement enhances XES analysis by offering an approach of obtaining quantitative electronic structural information on 3 d transition metal valence shells, facilitating applications across various scientific fields.

Bayesian optimization↗

Soft X-ray and EUV emission spectra of beryllium plasma produced by neodymium-glass laser radiation with broad frequency and angular spectra

We present the results of an experimental study of soft X-ray (SXR) and extreme ultraviolet emission spectra of the plasma produced by exposing a plane solid beryllium target to laser radiation with broad frequency and angular spectra. SXR lines up to 1s – 9p of Be IV as well as the plasma continuum are recorded for a laser focal-spot intensity of 5.3 × 10{sup 13} W cm{sup −2}. To model the SXR beryllium plasma spectra, simulations are carried out using the INDHAUS programme and the FLYCHK code in the framework of local thermodynamic equilibrium model, which agree nicely with experimentally obtained results. (laser plasma)

36 MATERIALS SCIENCE↗

Near-surface thermal gradients and their effects on mid-infrared emission spectra of planetary surfaces

We model the heat transfer by radiation and conduction in the top few millimeters of a planetary surface to determine the magnitude of near-surface (approximately 100 micrometers) thermal gradients and their effects on mid-infrared emission spectra for a number of planetary environments. The model is one-dimensional and uses a finite difference scheme for approximately 10 micrometers layers. Calculations are peformed for samples heated at the base and from above by sunlight. Our results indicate that near-surface radiative cooling creates significant thermal gradients in the top few hundred microns of surfaces in which radiation is an importamnt heat transfer mechanism. The effect is maximized in evacuated, underdense particulate media with sufficiently high temperatures. Near-surface thermal gradients will be significant in fine-grained particulate surfaces on the Moon (40-60 K/100 micrometers) and Mercury (approximately 80 K/100 micrometers), increasing spectral contrast and creating emission maxima in the transparent regions of the spectra. They will be of lesser importance on the surface of Mars, with a maximum value of around 5 k/100 micrometers in areas of low thermal inertia, and will be negligible on planets with more substantial atmospheres (less than 1 K/100 micrometers). We conclude that the effects that thermal gradients have on mid-IR emission spectra are predictable and do not negate the utility of emission spectroscopy for remote determination of planetary surface composition.

Henderson, B. G.↗