SEARCH · Engineering Papers
Results for “ELEMENTS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Potential Dependent Mn Oxidation and Its Role in Passivation of Ni 38 Fe 20 Cr 22 Mn 10 Co 10 Multi-Principal Element Alloy Using Multi-Element Resolved Atomic Emission Spectroelectrochemistry
The identity of passivating oxides on multi-principal element alloys is of great interest as their optimization offers the potential for exceptional corrosion resistance in aqueous solutions over a broad range of potential and pH. This study focuses on a non-equiatomic Ni 38 Fe 20 Cr 22 Mn 10 Co 10 solid solution alloy and tracks the fate of each alloying element during linear sweep voltammetry, low and intermediate potential holds in the passive potential domain as well as during open circuit relaxation after anodic polarization in slightly acidified Cl − solution. Ni dissolves at all potentials investigated in this work, Fe and Co are incorporated into oxides or hydroxides in low concentrations whilst Cr and Mn are enriched at passive potentials. At low passivating potentials, Mn(II) dissolves and is incorporated in minor amounts in oxides containing large concentrations of Cr(III). Considerable enrichment in Mn(II)-species occurs relative to Cr(III) in the oxide at 0.1 V vs SCE. Electrochemical impedance spectroscopy suggests the presence of layered oxides with marginal passivation at high Mn(II) levels. The formation of these oxides depends on a combination of thermodynamic and kinetic factors as well as the sequence of passivation.
Element redistributions during early stages of oxidation in a Ni38Cr22Fe20Mn10Co10 multi-principal element alloy
Element redistributions after initial gaseous oxidation of a Ni38Cr22Fe20Mn10Co10 (at%) multi-principle element alloy at 120°C and 300°C is captured via psuedo in situ atom probe tomography. All cations contribute to the oxide in both conditions, consisting of a Cr-rich inner oxide and Fe, Mn, Co and Ni-rich outer oxide. At the lower temperature, Ni tends to be trapped at the outer/inner oxide interface, while Ni enriches at the oxide/metal interface at higher temperature in tandem with Cr metal depletion. These observations confirm oxidation of complex alloys involves the formation of metastable, multi-layered oxide films, with a distinct tendency for solute trapping.
Plumbojarosite Remediation of Soil Affects Lead Speciation and Elemental Interactions in Soil and in Mice Tissues
Lead (Pb) contamination of soils is of global concern due to the devastating impacts of Pb exposure in children. Because early-life exposure to Pb has long-lasting health effects, reducing exposure in children is a critical public health goal that has intensified research on the conversion of soil Pb to low bioavailability phases. Recently, plumbojarosite (PLJ) conversion of highly available soil Pb was found to decrease Pb relative bioavailability (RBA <10%). However, there is sparse information concerning interactions between Pb and other elements when contaminated soil, pre- and post-remediation, is ingested and moves through the gastrointestinal tract (GIT). Addressing this may inform drivers of effective chemical remediation strategies. In this study, we utilize bulk and micro-focused Pb X-ray absorption spectroscopy to probe elemental interactions and Pb speciation in mouse diet, cecum, and feces samples following ingestion of contaminated soils pre- and post-PLJ treatment. RBA of treated soils was less than 1% with PLJ phases transiting the GIT with little absorption. In contrast, Pb associated with organics was predominantly found in the cecum. These results are consistent with transit of insoluble PLJ to feces following ingestion. The expanded understanding of Pb interactions during GIT transit complements our knowledge of elemental interactions with Pb that occur at higher levels of biological organization.
Controlling the corrosion resistance of multi-principal element alloys
Multi-principal element alloys (MPEAs) offer the possibility of many degrees of freedom in the choice of alloying elements to produce either single phase solid solutions or more complex multiphase microstructures. Large ranges of material properties have been observed for MPEAs and mastery of the selection of elements and their compositions can enable novel combinations of properties not possible in traditional alloys. From the aqueous corrosion perspective, optimization of phase stability, control of heterogeneities, passive film identity and its protectiveness, as well as substrate properties such as metal-metal bond strength and activation energy associated with dissolution, can all be controlling factors governed by alloy composition and structure. These factors can mediate the electrochemical reactions controlling spontaneous corrosion. The quest for superior properties based on well-informed element choice is suggested as a path forward guiding MPEA formulations for corrosion performance. However, gaps in fundamental knowledge exist regarding (a) the specific functions of each element, (b) the behavior of elements in unusual combinations, and (c) the formation of complex protective oxides. These issues currently hold back progress in optimization of corrosion properties.
Nuclear fuel elements including protective structures, and related method of forming a nuclear fuel element
A nuclear fuel element includes a core comprising a fissile element and an additional element. A protective structure surrounds the core and comprises at least a first material surrounding the nuclear fuel. The first material comprises the fissile element and the additional element and comprises a greater than stoichiometric amount of the additional element. An outer portion of the nuclear fuel element comprises a metal. Related nuclear fuel elements, and related methods are also disclosed.
Severe local lattice distortion in Zr- and/or Hf-containing refractory multi-principal element alloys
Explore the source record for details and available documents.
Alkali element (Li, Na, K, and Rb) doping of Cu 2 BaGe 1– x Sn x Se 4 films
Cu 2 BaGe 1–x Sn x Se 4 (CBGTSe) represents an exemplary system within the I 2 –II–IV–X 4 (I = Ag, Cu; II = Sr, Ba; IV = Ge, Sn; X = S, Se) family, which has been introduced to target suppressing the formation of anti-site defects and associated defect clusters within the analogous kesterite Cu 2 ZnSn(S,Se) 4 . Previous studies on CBGTSe films showed relatively low hole carrier densities (<10 13 cm –3 ), which may limit their corresponding application as active layers within photovoltaic, thermoelectric, and optoelectronic devices. In the current study, we explore the incorporation of alkali elements (Li, Na, K, and Rb) into CBGTSe films as prospective dopants to address the low hole carrier density and to allow for property tunability. First, incorporation of Na-, K-, and Rb-dopants noticeably increases the average grain sizes for CBGTSe films, while the Li-dopant has relatively limited impact. In addition, the alkali-dopants lead to a 1 to 3 orders of magnitude increase in hole carrier density (up to 10 15 cm –3 is achieved using K doping, corresponding to the alkali element yielding the highest doping efficiency). Here, the alkali-doped films show slightly lower minority carrier lifetimes and carrier mobility values than the non-doped samples, and these values are found to follow an approximate universal dependence with carrier density (also considering data derived from other previously explored vacuum-deposited I 2 –II–IV–X 4 chalcogenide films). As alkali-doping can significantly increase carrier densities, alkali elements can be considered useful p-type dopants for CBGTSe, as well as prospectively for other analogous I 2 –II–IV–X 4 systems.
Using diglycolamides to improve rare-earth element separation
The family of 17 elements known as the “rare earth elements” are difficult to produce economically. Despite this, they are described as “critical raw materials” because of their unique properties and their various technological applications. This means their use is accelerating globally. Separation of these elements is a fundamental challenge, but this does not daunt Dr Santa Jansone-Popova and her team at Oak Ridge National Laboratory. In recovering praseodymium from neodymium using a variety of ligands known as diglycolamides, she has been demonstrating potentially game-changing advances in liquid-liquid separations that could realise more of these in-demand materials.
A virtual element generalization on polygonal meshes of the Scott-Vogelius finite element method for the 2-D Stokes problem
The virtual element method (VEM) is a Galerkin approximation method that extends the finite element method to polytopal meshes. In this paper, we present a conforming formulation that generalizes the Scott-Vogelius finite element method (FEM) for the numerical approximation of the Stokes problem to polygonal meshes in the framework of the virtual element method. In particular, we consider a straightforward application of the virtual element approximation space for scalar elliptic problems to the vector case and approximate the pressure variable through discontinuous polynomials. We assess the effectiveness of the numerical approximation by investigating the convergence on a manufactured solution problem and a set of representative polygonal meshes. We numerically show that this formulation is convergent with optimal convergence rates except for the lowest-order case on triangular and square meshes where the method coincides with the P 1 - P 0 Scott-Vogelius scheme, which is well-known to be unstable.
A virtual element generalization on polygonal meshes of the Scott-Vogelius finite element method for the 2-D Stokes problem
The Virtual Element Method (VEM) is a Galerkin approximation method that extends the Finite Element Method (FEM) to polytopal meshes. In this paper, we present a conforming formulation that generalizes the Scott-Vogelius finite element method for the numerical approximation of the Stokes problem to polygonal meshes in the framework of the virtual element method. In particular, we consider a straightforward application of the virtual element approximation space for scalar elliptic problems to the vector case and approximate the pressure variable through discontinuous polynomials. We assess the effectiveness of the numerical approximation by investigating the convergence on a manufactured solution problem and a set of representative polygonal meshes. Finally, we numerically show that this formulation is convergent with optimal convergence rates except for the lowest-order case on triangular meshes, where the method coincides with the $\mathbb{P}_1$ – $\mathbb{P}_0$ Scott-Vogelius scheme, and on square meshes, which are situations that are well-known to be unstable.
Major element composition controls rare earth element solubility during leaching of coal fly ash and coal by-products
Coal combustion ash and pre-combustion coal refuse are currently under consideration as potential sources of rare earth elements. One of the early steps in recovering REEs from coal by-products is often acid leaching, which can result in low pH leachates with complex aqueous chemistry. The aim of this work was to understand the connection between REE solubility, pH, and major elemental components of leachates for coal by-products. To accomplish this, we investigated the effects of solids concentration (i.e., pulp density) and pH adjustment on REE solubility in acid leachates of coal fly ashes from the Powder River Basin (PRB) and Appalachian Basin in the United States, and a coal processing refuse from the Southwestern U.S. For PRB ashes, the concentrations of soluble REEs generally increased with increasing pulp density; however, at pulp density values above 80–100 g/L, the soluble REE concentrations in the leachates were markedly lower. Similarly, the soluble concentrations of other major solutes (Fe, Al, Si) that leached from PRB fly ashes were also non-linear with pulp density. These major elements tended to reach maximum concentration values at 60–70 g/L pulp density. In contrast, for the Appalachian fly ashes and the coal by-product, soluble concentrations of REE and major elements in leachates increased linearly with pulp density. Chemical equilibria calculations of mineral saturation indices indicated that trends in soluble REE concentrations could be explained by saturation conditions for Fe and Al-(hydr)oxides and possibly sulfate minerals, but not lanthanide hydroxides. Furthermore, pH adjustment of the acid leachates showed that REEs and many major solutes were removed from solution at pH values above 4.5, also consistent with Fe- and Al-(hydr)oxide precipitation. These results highlight the importance of understanding the chemical composition of leachates when designing REE recovery processes for low-grade geologic feedstocks and that precipitation of hydr(oxide) or sulfate minerals of major elements rather than discreet formation of REE mineral phases could be used for process optimization.
A novel approach for tetrahedral-element-based finite element simulations of anisotropic hyperelastic intervertebral disc behavior
Intervertebral discs are microstructurally complex spinal tissues that add greatly to the flexibility and mechanical strength of the human spine. Attempting to provide an adjustable basis for capturing a wide range of mechanical characteristics and to better address known challenges of numerical modeling of the disc, we present a robust finite-element-based model formulation for spinal segments in a hyperelastic framework using tetrahedral elements. We evaluate the model stability and accuracy using numerical simulations, with particular attention to the degenerated intervertebral discs and their likely skewed and narrowed geometry. To this end, 1) annulus fibrosus is modeled as a fiber-reinforced Mooney-Rivlin type solid for numerical analysis. 2) An adaptive state-variable dependent explicit time step is proposed and utilized here as a computationally efficient alternative to theoretical estimates. 3) Tetrahedral-element-based FE models for spinal segments under various loading conditions are evaluated for their use in robust numerical simulations. For flexion, extension, lateral bending, and axial rotation load cases, numerical simulations reveal that a suitable framework based on tetrahedral elements can provide greater stability and flexibility concerning geometrical meshing over commonly employed hexahedral-element-based ones for representation and study of spinal segments in various stages of degeneration.
Volatile Element Evidence of Local MORB Mantle Heterogeneity Beneath the Southwest Indian Ridge, 48°–51°E
Abstract The mantle source beneath the Southwest Indian Ridge (SWIR) reflects a complex history of contamination. Magmatic volatile contents are vital tracers of these kinds of heterogeneities, which may fractionate otherwise constant volatile/non‐volatile elemental ratios, such as the H 2 O/Ce ratio. Although several studies have recently used trace element and isotopic data to address mantle source heterogeneity and magmatic processes at SWIR 48°–51°E region, volatile element constraints provide a valuable test of models for the origins of mantle heterogeneities in this region. Here, we present new data for nine rare basaltic glass samples from the 48°–51°E region, which enable careful assessment of the effects of primary versus secondary processes on the glass volatile contents. These samples are strongly affected by variable extents of carbon degassing, and shallow assimilation of Cl‐rich fluid, but also reveal consistently high H 2 O/Ce ratios (458.8 ± 14.9), among the highest in MORBs, that cannot be explained by late‐stage secondary processes, crustal assimilation, or simple melting of peridotite mantle at variable depths. Instead, the high H 2 O/Ce ratios are features of the mantle source composition. The 48°–51°E region is notably more depleted in highly incompatible trace elements relative to other regions of the SWIR, although this depletion is not apparent in H 2 O, which is similarly abundant throughout the SWIR. We link the high H 2 O/Ce ratios in these glasses with other trace element characteristics diagnostic of subduction and fluid addition, suggesting that the mantle source reflects signatures of a refractory mantle residue that previously melted within a subduction zone.
Elementally Resolved Dissolution Kinetics of a Ni-Fe-Cr-Mn-Co Multi-Principal Element Alloy in Sulfuric Acid Using AESEC-EIS
Atomic emission spectroelectrochemistry (AESEC) combined with linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) provided insights on both active and passive dissolution of Ni-Fe-Cr-Mn-Co multi-principal element alloy. Elemental dissolution rates measured by AESEC during open circuit experiment were in agreement with those extrapolated from AESEC-LSV and indicated element-specific dissolution tendencies. AESEC-EIS at open circuit potential showed nearly in-phase elemental dissolution during potential modulation which suggests direct dissolution from the alloy surface to the electrolyte. In the passive potential domain, no oscillation of the elemental dissolution rate was detected by AESEC-EIS, suggesting non-oxidative chemical dissolution of the outer layer of the passive film. In this case, dissolution at the passive film/electrolyte interface was equal to the metal oxidation rate (passive current density) at the metal/passive film interface and the passive current density was independent of potential.
Distribution of rare earth elements and other critical elements in beneficiated Pennsylvania anthracites
The Pennsylvania Anthracite Fields are in a complex tectonic and metamorphic terrain, historically hosting one of the largest concentrations of coal mining in the USA. Anthracite mining now largely consists of the surface mining of the pillars remaining from the prime years of underground mining. The geochemical study of the sized coal products and the refuse (largely rock) from three preparation plants (breakers) demonstrates that Principal components analysis (PCA) of select major oxide, minor element, and rare earth elements illustrates some differentiation among the products from the individual plants. The rock samples, with abundant quartz and metamorphic Al-Si minerals and with a lower ash-basis REE concentration than the coals, were distinctly separated from the coal samples on the PCA plots. Plots of Gd N /Gd N * vs. Eu N /Eu N * and Ce N /Ce N * vs. Eu N / Eu N * showed differentiation between the individual suites of coals showed that the refuse samples had distinct REE distributions compared to the associated coals. Further, several minor and trace elements show enrichments in the coal samples. Lithium, with concentrations of up to 314 ppm on an ash basis, is among the most promising of the critical elements, exceeding the enrichment of the REY and Sc.
Baryon number violation: from nuclear matrix elements to BSM physics
Processes that violate baryon number, most notably proton decay and $n\bar{n}$ transitions, are promising probes of physics beyond the Standard Model (BSM) needed to understand the lack of antimatter in the Universe. To interpret current and forthcoming experimental limits, theory input from nuclear matrix elements to UV complete models enters. Thus, an interplay of experiment, effective field theory, lattice QCD, and BSM model building is required to develop strategies to accurately extract information from current and future data and maximize the impact and sensitivity of next-generation experiments. Here, we briefly summarize the main results and discussions from the workshop ‘INT-25-91W: Baryon Number Violation: From Nuclear Matrix Elements to BSM Physics,’ held at the Institute for Nuclear Theory, University of Washington, Seattle, WA, 13–17 January 2025.
The role of ternary alloying elements in eutectoid transformation of U-10Mo alloy part II. In and Ex-situ Neutron diffraction-based assessment of eutectoid phase transformation kinetics in U-9.8Mo-0.2X alloy (X = Cr, Ni or Co)
HExploring the effects of minor ternary alloying additions, typically impurity elements, on the phase stability of U-10Mo is important for preventing undesirable phase decomposition during processing or during service. This work examines the influence small ternary additions of Cr, Ni, and Co. Both in-situ and ex-situ neutron diffraction measurements made during and after high temperature (450 – 525°C) exposures were used to better define the influence of these elements on the time-temperature-transformation (TTT) behavior of U-10Mo, providing information which is complementary to electron microscopy investigations of the same alloy systems performed in the first part of this work. Minor additions of Ni and Co decrease the ?-phase stability at all temperatures investigated. Signatures of U6X (X = Ni or Co) compounds were shown to be present in amounts of up to 6 wt% in the heat treated alloys, suggesting that the initial precipitation of this phase may catalyze further ?-phase decomposition. On the other hand, the Cr containing alloys were observed to have nearly the same, and in some cases slower, phase transformation kinetics when compared to the binary U-10Mo control samples. The results of the study have enabled preliminary estimates of the TTT curves for the ternary alloys.