Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Dynamic Parameter Estimation with Physics-based Neural Ordinary Differential Equations

Accurate estimation of dynamic parameters of gen-erators is crucial to building a reliable model for dynamical studies and reliable operation of the power system. This paper develops a physics-based neural ordinary differential equations (ODE) approach to learn the parameters of generator dynamic model using phasor measurement units (PMU) data. We design a physics-based neural network to represent the swing equations of the power system dynamics. A loss function is defined as the difference between dynamic simulation results from the physics-based neural networks and pseudo PMU measurements. The parameters of generator dynamic model are iteratively updated using the neural ODEs and the adjoint method. By exploiting the mini-batch scheme in neural ODE training, the parameter estimation performance is significantly improved. Numerical study results on a 3-machine 9-bus system show that the proposed algorithm outperforms state-of-the-art baseline method in both computation time and dynamic parameter estimation accuracy.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Pragmatic Uncertainty Quantification and Propagation in Inverse Estimation of Structural Dynamics Parameters given Material Property Uncertainties and Limited Sensor Data

In this report we demonstrate some relatively simple and inexpensive methods to effectively account for various sources of epistemic lack-of-knowledge type uncertainty in inverse problems. The demonstration problem involves inverse estimation of six parameters of a bolted joint that attaches a kettlebell shaped object to a thick plate. The parameters are efficiently inverted in a modal-based model calibration using gradient-based optimization. Two material properties of the kettlebell are treated as uncertain to within given epistemic uncertainty bounds. We apply and test interval and sparse-sample probabilistic approaches to account for uncertainty in the estimated parameters (and various scalar functionals of the parameters as generic quantities of interest, QOIs) due to uncertainties in the material properties. We also investigate the error effects of limited numbers of vibration sensors (accelerometers) on the kettlebell and plate, and therefore abbreviated excitation/response information in the parameter inversions. We propose and demonstrate a Leave-K-Sensors-Out “cross-prediction” UQ approach to estimate related uncertainties on the parameters and QOI functionals. We indicate how uncertainties from material properties and limited sensors are treated in a combined manner. The economical combined UQ approach involves just three to five samples (i.e. three to five inverse simulations), with no added complication or error/uncertainty from use of surrogate models for affordability. Finally, we describe a related economical UQ approach for handling potential parameter solution non-uniqueness and numerical optimization related precision uncertainties in the estimated parameter values. Indicated further research is identified.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dynamic Modeling, Parameter Estimation, and Data Reconciliation of a Supercritical Pulverized Coal-Fired Boiler

A high-fidelity, spatially distributed dynamic model of a supercritical pulverized coal-fired boiler was developed for calculating transient thermal profiles of the boiler tubes, which are often not measured or unmeasurable in industrial settings due to the harsh operating conditions. In this work, rigorous models of the subcritical and supercritical steam properties, which can be highly nonlinear, were used to capture the transition between two-phase and one-phase flow, respectively, as supercritical boilers frequently transition through the critical point during load-following operation. The transient boiler model was also used for data reconciliation and parameter estimation for the purpose of model validation against industrial data. An approach was developed to reduce the size of large-scale reconciliation problem by focusing on the implementation of bias terms for the reconciled variables, which can be estimated in place of the reconciled variables themselves. In addition, a functional approximation of the reconciliation problem was defined so that it can be more simply optimized. Combining this functional approximation optimization with reformulation of the reconciliation problem considering measurement biases can significantly improve the tractability of many such large-scale problems. The validated boiler model was then used to study transient responses under load-following operation with specific attention on the calculation of unmeasurable variables.

42 ENGINEERING↗
DOE OSTI2021

Oscillatory Spreading and Inertia in Power Grids

The increase in variable renewable generators (VRGs) in power systems has altered the dynamics from a historical experience. VRGs introduce new sources of power oscillations, and the stabilizing response provided by synchronous generators (SGs, e.g., natural gas, coal, etc.), which help avoid some power fluctuations, will lessen as VRGs replace SGs. These changes have led to the need for new methods and metrics to quickly assess the likely oscillatory behavior for a particular network without performing computationally expensive simulations. This work studies the impact of a critical dynamical parameter - the inertia value - on the rest of a power system's oscillatory response to representative VRG perturbations. We use a known localization metric in a novel way to quantify the number of nodes responding to a perturbation and the magnitude of those responses. This metric allows us to relate the spread and severity of a system's power oscillations with inertia. We find that as inertia increases, the system response to node perturbations transitions from localized (only a few close nodes respond) to delocalized (many nodes across the network respond). We introduce a heuristic computed from the network Laplacian to relate this oscillatory transition to the network structure. We show that our heuristic accurately describes the spread of oscillations for a realistic power-system test case. Using a heuristic to determine the likely oscillatory behavior of a system given a set of parameters has wide applicability in power systems, and it could decrease the computational workload of planning and operation.

dynamical systems↗
DOE OSTI2023

More relaxed intracluster gas than galaxies in clusters in quasi-equilibrium

ABSTRACT During cluster mergers, the intracluster gas and member galaxies undergo dynamic evolution, but at different time-scales and reach different states. We collect 24 galaxy clusters in quasi-equilibrium state as indicated by the X-ray image, and calculate the cluster orientations and three kinds of dynamical parameters, i.e. the normalized centroid offset, the sphere index, and the ellipticity, for these clusters from the distributions of member galaxies and also the intracluster gas. We find consistent alignments for the orientations estimated from the two components. However, the three kinds of dynamical parameters indicated by member galaxies are systematically larger than those derived from the gas component, suggesting that the gas component is more relaxed than member galaxies. Differences of dynamical features between the intracluster gas and member galaxies are independent of cluster mass and concentration. We conclude that the intracluster gas reaches the dynamic equilibrium state earlier than the almost-collisionless member galaxies.

Astronomy & Astrophysics↗
DOE OSTI2022

SIT 45: An interacting, compact, and star-forming isolated galaxy triplet

The underlying scenario of the formation and evolution of galaxy triplets is still uncertain. Mergers of galaxies in isolated triplets give us the opportunity to study the already complex merging process, with minimal contamination of other environmental effects that potentially allow and accelerate galaxy transitions from active star-forming to passive galaxies. The merging system SIT 45 (UGC 12589) is one of 315 systems in the SDSS-based catalogue of Isolated Triplets (SIT); it is an unusual isolated galaxy triplet, consisting of three merging late-type galaxies. The main aims of this work are to study the dynamical evolution and star formation history (SFH) of SIT 45, as well as its dependence on its local and large-scale environment. Methods. To study its dynamics, parameters such as the velocity dispersion (σ v ), the harmonic radius (R H ), the crossing time (H 0 t c ), and the virial mass (M vir ), along with the compactness of the triplet (S) were considered. To investigate the possible dependence of these dynamical parameters on the environment, the tidal force Q parameters (both local and large-scale) and the projected local density (η k ) were used. To constrain the SFH, we used CIGALE to fit its observed spectral energy distribution using multiwavelength data from the ultraviolet to the infrared. SIT 45 is one of the most compact triplets in the SIT, and it is also more compact than triplets in other samples. According to its SFH, SIT 45 presents star formation, where the galaxies also present recent (~200 Myr) star formation increase, indicating that this activity may have been triggered by the interaction. Its dynamical configuration suggests that the system is highly evolved in comparison to the SIT. However, this is not expected for systems composed of star-forming late-type galaxies, based on observations in compact groups. We conclude that SIT 45 is a system of three interacting galaxies that are evolving within the same dark matter halo; its compact configuration is a consequence of the ongoing interaction rather than being due to a long-term evolution (as suggested from its H 0 t c value). We consider two scenarios for the present configuration of the triplet, one where one of the members is a tidal galaxy, and another where this galaxy arrives to the system after the interaction. Both scenarios need further exploration. The isolated triplet SIT 45 is therefore an ideal system to study short timescale mechanisms (~10 8 yr), such as starbursts triggered by interactions which are more frequent at higher redshift.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Noise reduction in X-ray photon correlation spectroscopy with convolutional neural networks encoder–decoder models

Abstract Like other experimental techniques, X-ray photon correlation spectroscopy is subject to various kinds of noise. Random and correlated fluctuations and heterogeneities can be present in a two-time correlation function and obscure the information about the intrinsic dynamics of a sample. Simultaneously addressing the disparate origins of noise in the experimental data is challenging. We propose a computational approach for improving the signal-to-noise ratio in two-time correlation functions that is based on convolutional neural network encoder–decoder (CNN-ED) models. Such models extract features from an image via convolutional layers, project them to a low dimensional space and then reconstruct a clean image from this reduced representation via transposed convolutional layers. Not only are ED models a general tool for random noise removal, but their application to low signal-to-noise data can enhance the data’s quantitative usage since they are able to learn the functional form of the signal. We demonstrate that the CNN-ED models trained on real-world experimental data help to effectively extract equilibrium dynamics’ parameters from two-time correlation functions, containing statistical noise and dynamic heterogeneities. Strategies for optimizing the models’ performance and their applicability limits are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nanosecond Structural Dynamics during Electrical Melting of Charge Density Waves in 1⁢T-TaS 2

Electrical control of charge density waves has been of immense interest, as the strong underlying electron-lattice interactions potentially open new, efficient pathways for manipulating their ordering and, consequently, their electronic properties. However, the transition mechanisms are often unclear as electric field, current, carrier injection, heat, and strain can all contribute and play varying roles across length scales and timescales. Here, we provide insight on how electrical stimulation melts the room temperature charge density wave order in 1T-TaS 2 by visualizing the atomic and mesoscopic structural dynamics from quasistatic to nanosecond pulsed melting. Using a newly developed ultrafast electron microscope setup with electrical stimulation, we reveal the order and strain dynamics during voltage pulses as short as 20 ns. The order parameter dynamics across a range of pulse amplitudes and durations support a thermally driven mechanism even for fields as high as 19 kV cm -1 . In addition, time-resolved imaging reveals a heterogeneous, mesoscopic strain response across the flake, including MHz-scale acoustic resonances that emerge during sufficiently short pulsed excitation which may modulate the order. In conclusion, these results suggest that metallic charge density wave phases like studied here may be more robust to electronic switching pathways than insulating ones, motivating further investigations at higher fields and currents in this and other related systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Particle Swarm Optimization of Dynamic Load Model Parameters in Large Systems

This paper considers two dynamic load models that are widely used in industry to account for induction motor behavior: CMLD and CLOD. These models must be parametrized for the specific utility system in a general way so that they can be used in planning studies and provide a conservative but realistic representation of load behavior. This study considers a measurement-based approach to tuning both models. The load modeling study compares the response of the tuned models to generic candidate models using historical events. This study considers one area-based subsystem to simplify the modeling approach and reduce the number of models required for simulations. Additionally, because dynamic load models often produce similar results for different sets of parameters, a sensitivity study was conducted to assess the parameter impacts on the voltage response. The sensitivity study covers the parameters that are tuned using event measurements. The process to estimate the parameters uses the particle-swarm optimization algorithm. Overall, the performance of the tuned model more accurately captures recovery voltage, delayed recovery, and settling voltage than its predecessor models while not being overly tuned so that it remains general for peak summer conditions.

dynamic load modeling↗
DOE OSTI2022

A Spectroscopic View of the JWST/GTO Strong Lensing Cluster A1489

We discuss a spectroscopic survey of the strong lensing cluster A1489 that includes redshifts for 195 cluster members along with central velocity dispersions for 188 cluster members. The caustic technique applied to the redshift survey gives the dynamical parameters M 200 = (1.25 ± 0.09) × 10 15 M ⊙ , R 200 = 1.97 ± 0.05 Mpc, and a cluster line-of-sight velocity dispersion of 1150 ± 72 km s -1 within R 200 . These parameters are very similar to those of other strong lensing systems with comparably large Einstein radii. We use the spectroscopy and deep photometry to demonstrate that A1489 is probably dynamically active; its four brightest cluster galaxies have remarkably different rest-frame radial velocities. Like other massive strong lensing clusters, the velocity dispersion function for members of A1489 shows an excess for dispersions ≳250 km s -1 . The central dispersions also provide enhanced constraints on future lensing models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

VIC-Global Parameter Dataset Sensitivity with the Variable Infiltration Capacity Model: Evaluating the importance of dynamic land surface parameters when using the VIC-Global parameter dataset

Accurate prediction of runoff is essential to water resources management, flood risk assessment, and ecosystem protection. However, many hydrological models still have relatively substantial limitations when representing the influence of land use and land cover (LULC) on runoff generation and routing. Changes in LULC, such as deforestation, urban expansion, agricultural intensification, and wetland loss, have been shown to alter the water balance at the land surface through fundamental hydrologic processes (e.g., interception, infiltration, evapotranspiration, and soil storage). However, it remains an open question what the exact magnitude and timing of these impacts are for the spatial and temporal scales commonly used in engineering applications. In this analysis we focus on one aspect of recent LULC change for assessing human impacts, which is urbanization. Specifically we seek to determine the impacts of urbanization on the magnitude and timing of surface runoff and baseflow in HUC-12 basins in Clark County, Nevada which has experienced rapid urbanization. We use the Variable Infiltration Capacity (VIC) hydrology model with a widely used off-the-shelf dataset of land surface parameters, VIC-Global, both of which have been commonly used in the past for water and energy balance modeling for large scale hydrologic studies. We examine two scenarios where the first scenario removes all urbanized land cover and parameterizes those areas of the basins as barren or open shrubland. The second scenario tests the opposite case where all areas of the basins are classified as urban regardless of their present classification. The results from the VIC model show there is a low sensitivity for daily surface runoff between scenarios. The daily baseflow values indicate similar low sensitivity to the classification change during specific periods, but then have substantial differences during other period when large precipitation events are occurring. This is likely due to the assumed parameter values for the urban land cover classification made by the VIC-Global dataset. Using a static land cover parameterization is reasonable for large domain hydrology models that are being used for near-term planning horizons (<30 years). However, longer planning horizons where feedbacks between the atmosphere and land surface are important, especially in transient climate situations, considerations for how to update land surface parameters should be incorporated.

42 ENGINEERING↗
DOE OSTI2022

Single electron in a storage ring: a probe into the fundamental properties of synchrotron radiation and a powerful diagnostic tool

An experimental study of undulator radiation generated by a single electron was carried out at the Integrable Optics Test Accelerator (IOTA) storage ring at Fermilab. Photons were detected with a single-photon avalanche diode (SPAD) at an average rate of 20 kHz, corresponding to one detection every few hundred revolutions. Events were continuously recorded by a picosecond event timer for as long as 5 minutes at a time. The collected data were used to directly test the predictions of classical Poisson photostatistics. The study was motivated in part by a previous observation of sub-Poissonian statistics in a similar experiment with synchrotron radiation. In addition, we show that the time series of recorded events can be used to study the synchrotron motion of a single electron, yielding dynamical parameters such as the phase jitter of the radiofrequency cavity and the dependence of the synchrotron period on amplitude. Research plans for further experiments are also discussed.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Explosion behavior investigation and safety assessment of large-format lithium-ion pouch cells

We report large-format lithium-ion (Li-ion) batteries with high energy density for electric vehicles are prone to thermal runaway (or even explosion) under abusive conditions. In this study, overcharge induced explosion behaviors of large-format Li-ion pouch cells with Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 cathode at different current rates (C-rates) (0.5C, 1C, 2C) were investigated. The explosion characteristics of the cells were elucidated by discussing the evolution of the cell voltage, the surface temperature and the shock wave pressure. Generally, the whole overcharge process could be divided into four stages according to the evolution of several key parameters and the overcharge behaviors; the overcharge C-rate has a great influence on cells’ thermal behaviors. The experimental results showed that the thermal runaway process of Li-ion cells caused by overcharging consisted of two kinds of explosions, physical explosion and chemical explosion. The existence of observable negative pressure zone in the pressure curves indicated that the Li-ion cells are not a self-supplying oxygen system during the explosion. Further, the explosion dynamics parameters were matched. An explosion TNT-equivalent conversion strategy that depended on the pressure of the shock wave was utilized to evaluate the released energy and its hazards. In addition, with respect to the overcharge of Li-ion pouch cells, a safety assessment method and a safety management method were proposed based on the explosion behaviors. From the perspective of battery safety, this study is of great significance for the safety design of Li-ion cells and can provide guidance for engineers to optimize the safety function of battery packs.

25 ENERGY STORAGE↗
DOE OSTI2022

Statistical Properties of Undulator Radiation

Two experiments were carried out to study the statistical properties of undulator radiation in the Integrable Optics Test Accelerator (IOTA) storage ring at Fermilab. The first experiment studied the turn-to-turn fluctuations in the power of the radiation generated by an electron bunch. The magnitude of these fluctuations depends on the 6D phase-space distribution of the electron bunch. In IOTA, we demonstrated that this effect can be used to measure some electron bunch parameters, small transverse emittances in particular. In the second experiment, a single electron was stored in the ring, emitting a photon only once per several hundred turns. In this regime, any classical interference-related collective effects were eliminated, and the quantum fluctuations could be studied in detail to search for possible deviations from the expected Poissonian photon statistics. In addition, the photocount arrival times were used to track the longitudinal motion of a single electron and to compare it with simulations. This allowed us to determine several dynamical parameters of the storage ring such as the rf cavity phase jitter and the dependence of the synchrotron motion period on amplitude.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Files and scripts to support manuscript Needham et al. Canopy Gradients of Respiration

This dataset includes the parameter files, relevant output files, and scripts to perform analysis with Jupyter notebooks that support the manuscript Needham et al 2025 “Canopy Gradients of Respiration Drive Plant Carbon Budgets and Leaf Area Index.” We add functionality to the Functionally Assembled Terrestrial Ecosystem Simulator (FATES) to allow flexible vertical gradients of leaf maintenance respiration (Rdark) and maximum carboxylation rate (Vcmax) through the canopy. We test the sensitivity of FATES to canopy gradients in Rdark, both in global simulations to assess broad scale impacts on leaf area index (LAI) and vegetation carbon, and in single site simulations where we assess impacts on plant functional type (PFT) competitive dynamics. Parameter files are netcdf files that can be converted to human readable .cdl files using NCO tools. Analysis scripts are Jupyter notebook files. These can be opened and run using the open source Jupyter notebook software. Model outputs are netcdf files.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Southwest Pacific tropical cyclone development classification utilizing machine learning and synoptic composites

This study evaluates the ability of machine learning algorithms to classify tropical depressions (TDs) and tropical storms (TSs) in the western region of the southwest Pacific Ocean (SWPO). Decision rules are generated to predict the environment required for a depression to fully develop into a mature storm, and the most influential predictors in the classification decision are ranked. TD and TS are discriminated based on a maximum sustained wind speed threshold (≥17 ms -1 ). Various aerosol, thermodynamic, and dynamic parameters are extracted closest to the initiation point of each non-developing and developing sample. The covariates associated with each labelled sample are used to train a decision tree and random forest model. Results using a testing dataset suggest the random forest approach more accurately distinguishes between non-developing and developing samples. The classification accuracy of the decision tree and random forest are 72% and 91%, respectively. Random forest outperformed the decision tree by providing higher accuracy in test data. The most important variables for binary classification are sea salt aerosol optical depth (AOD), 1,000 mb relative humidity, and sea surface temperature. AOD is a quantitative estimate of the aerosols presents in the air through the extinction of a ray of light as it passes through the atmosphere. Mean composite maps constructed in an unsupervised manner have been created for the most important variables identified by the random forest classifier during TD and TS events to highlight the difference in geophysical and aerosol variables' climatology during the two different classifications. This work will advance the risk management strategies for northeastern Australia and other SWPO basin islands to control their tropical cyclone related losses through prioritizing forecasting variables that are the strongest predictors of the strengthening of tropical depressions into tropical cyclones.

54 ENVIRONMENTAL SCIENCES↗