Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DyN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

18 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Materials Data on DyN by Materials Project

DyN is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. Dy3+ is bonded to six equivalent N3- atoms to form a mixture of edge and corner-sharing DyN6 octahedra. The corner-sharing octahedral tilt angles are 0°. All Dy–N bond lengths are 2.46 Å. N3- is bonded to six equivalent Dy3+ atoms to form a mixture of edge and corner-sharing NDy6 octahedra. The corner-sharing octahedral tilt angles are 0°.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dyn$\mathrm{AMO}$: Multi-agent reinforcement learning for dynamic anticipatory mesh optimization with applications to hyperbolic conservation laws

Here we introduce DynAMO, a reinforcement learning paradigm for Dynamic Anticipatory Mesh Optimization. Adaptive mesh refinement is an effective tool for optimizing computational cost and solution accuracy in numerical methods for partial differential equations. However, traditional adaptive mesh refinement approaches for time-dependent problems typically rely only on instantaneous error indicators to guide adaptivity. As a result, standard strategies often require frequent remeshing to maintain accuracy. In the DynAMO approach, multi-agent reinforcement learning is used to discover new local refinement policies that can anticipate and respond to future solution states by producing meshes that deliver more accurate solutions for longer time intervals. By applying DynAMO to discontinuous Galerkin methods for the linear advection and compressible Euler equations in two dimensions, we demonstrate that this new mesh refinement paradigm can outperform conventional threshold-based strategies while also generalizing to different mesh sizes, remeshing and simulation times, and initial conditions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Neutral to charged kaon yield fluctuations in Pb – Pb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV

We present the first measurement of event-by-event fluctuations in the kaon sector in Pb – Pb collisions at $\sqrt{s_{NN}}$ = 2.76 TeV with the ALICE detector at the LHC. The robust fluctuation correlator νdyn is used to evaluate the magnitude of fluctuations of the relative yields of neutral and charged kaons, as well as the relative yields of charged kaons, as a function of collision centrality and selected kinematic ranges. While the correlator $ν_{dyn}[K^+, K^–]$ exhibits a scaling approximately in inverse proportion of the charged particle multiplicity, $ν_{dyn}[K^0_S, K^±]$ features a significant deviation from such scaling. Within uncertainties, the value of $ν_{dyn}[K^0_S, K^±]$ is independent of the selected transverse momentum interval, while it exhibits a pseudorapidity dependence. The results are compared with HIJING, AMPT and EPOS–LHC predictions, and are further discussed in the context of the possible production of disoriented chiral condensates in central Pb – Pb collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Dynamics of deuterium retention and desorption from plasma-facing materials in fusion reactor-relevant conditions

Hydrogen isotopes retention and desorption during and after discharges in fusion devices are still not well understood due to the complex device conditions and limitations of in-situ diagnostics and measurements. Here, we simulated well-diagnosed recent experiments at the DIII-D facility to benchmark our ITMC-DYN integrated package of modeling deuterium diffusion, retention, and desorption during and after D discharge irradiation. Modeling results were compared with detail experimental data of D desorption fluxes for various irradiation conditions. We predicted the temporal evolution of free and trapped D distribution in tungsten (W) plasma-facing material (PFM). Effects of key parameters namely diffusion coefficient, recombination rate, trapping energies against different defect types, were examined in these simulations. Existing experimental data of these parameters in literature varies significantly which makes it harder to identify key mechanisms and physics responsible for hydrogen isotope retention and desorption. The purpose of this work is to accurately simulate recent well-diagnosed reactor experiments given the uncertainties in such parameters and identify mechanisms responsible for the retention and desorption. We implemented the best identified diffusion, recombination, and trapping parameters in ITMC-DYN package that integrate both various collisional and thermal processes. We predicted, for example, that sample cooling between discharges in DIII-D operations can significantly affect the spatial distribution of trapped D in W under reactor irradiation conditions. Correct prediction of desorption spectra from samples irradiated during 10 DIII-D discharges showed that up to 35% of D can be retained in high binding energy defects such as vacancy clusters or voids.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Velocity dispersion and dynamical masses for 388 galaxy clusters and groups

The second catalogue of Planck Sunyaev-Zeldovich (SZ) sources, hereafter PSZ2, represents the largest galaxy cluster sample selected by means of their SZ signature in a full-sky survey. For this work, using telescopes at the Canary Island observatories, we conducted the long-term observational program 128- MULTIPLE-16/15B (hereafter LP15), a large and complete optical follow-up campaign of all the unidentified PSZ2 sources in the northern sky, with declinations above –15° and no correspondence in the first Planck catalogue PSZ1. This paper is the third and last in the series of LP15 results, after Streblyanska et al. (2019, A&A, 628, A13) and Aguado-Barahona et al. (2019, A&A, 631, A148), and presents all the spectroscopic observations of the full program. We complement these LP15 spectroscopic results with Sloan Digital Sky Survey archival data and other observations from a previous program (ITP13-08), and present a catalogue of 388 clusters and groups of galaxies including estimates of their velocity dispersion. The majority of them (356) are optical counterparts of PSZ2 sources. A subset of 297 of those clusters are used to construct the M SZ – M dyn scaling relation based on the estimated SZ mass from Planck measurements and our dynamical mass estimates. We discuss and correct for different statistical and physical biases in the estimation of the masses, such as the Eddington bias when estimating M SZ and the aperture and the number of galaxies used to calculate M dyn . The SZ-to-dynamical mass ratio for those 297 PSZ2 clusters is (1 – B) = 0.80 ± 0.04 (stat) ± 0.05 (sys), with only marginal evidence for a possible mass dependence for this factor. Our value is consistent with previous results in the literature, but is associated with a significantly smaller uncertainty due to the use of the largest sample size for this type of study.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Measuring the density, viscosity, and surface tension of molten titanates using electrostatic levitation in microgravity

Rare earth and barium titanates are useful as ferroelectric, dielectric, and optical materials. Measurements of their thermophysical properties in the liquid state can help guide melt processing technologies for their manufacture and advance understanding of fragile liquids' behavior and glass formation. Here, we report the density, thermal expansion, viscosity, and surface tension of molten BaTi 2 O 5 , BaTi 4 O 9 , and 83TiO 2 -17RE 2 O 3 (RE = La or Nd). Measurements were made using electrostatic levitation and droplet oscillation techniques in microgravity, which provide access to quiescent liquid droplets and deep supercooling of 510–815 K below the equilibrium melting points. Densities were measured over 900–2400 K. Viscosities were similar for all four compositions, increasing from ~10 mPa s near 2100 K to ~30 mPa s near 1750 K. Surface tensions were 450–490 dyn cm -1 for the rare earth titanates and 383–395 dyn cm -1 for the barium titanates; surface tensions of all compositions had small or negligible temperature dependence over 1700–2200 K. In conclusion, for solids recovered after melt quenching, x-ray microtomography revealed the fracture mechanics in crystalline products and minimal internal porosity in glass products, likely arising from entrapped gas bubbles. Internal microstructures were generally similar for products processed either in microgravity or in a terrestrial aerodynamic levitator.

42 ENGINEERING↗
DOE OSTI2023

Rotation curves and dynamical masses of MaNGA barred galaxies

In this paper we analyse a sample of 46 barred galaxies of MaNGA. Our goal is to investigate the stellar kinematics of these galaxies and obtain their rotation curves. Additionally, we aim to derive the total stellar and dynamical masses, as well as the maximum rotation velocity, in order to examine their distributions and scaling relations. Using the Pipe3D dataproducts publicly available we obtained the rotation curves, which were fitted considering two components of an axisymmetric Miyamoto–Nagai gravitational potential. We found a wide range of the maximum rotation velocities (117–340 ${\rm km\, s^{-1}}$), with a mean value of 200 ${\rm km\, s^{-1}}$. In addition we found that the total stellar and dynamical masses are in the range of log(M star /M ⊙ ) = 10.1−11.5, with a mean value of log(M star /M ⊙ ) = 10.8, and log(M dyn /M ⊙ ) = 10.4−12.0, with a mean value of log(M dyn /M ⊙ ) = 11.1, respectively. We found a strong correlation between dynamical mass and maximum velocity, between maximum velocity and magnitude, and between stellar mass and maximum velocity. According to these results, barred galaxies exhibit similar behaviour to that of normal spiral galaxies with respect to these relations, as well as in terms of the distribution of their dynamical mass and maximum rotation velocity. However, we found that the distribution of stellar masses of barred galaxies is statistically different from other samples including non-barred galaxies. Finally, analysing the galaxies that show nuclear activity, we find no difference with the rotation curves of normal galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Correlation between time and angular alignment in molecular dynamics simulations of heavy ion collisions

Neutron-proton equilibration is a process which has been used to study the density dependence of the symmetry energy term in the nuclear equation-of-state. Here, this study utilizes constrained molecular dynamics (CoMD) simulations of 70 Zn + 70 Zn with collision energies of 35 and 45 MeV/nucleon. An algorithm is used which searches through CoMD events and identifies the PLF* after it separates from the target and determines its lifetime, Δt. It also determines the fragments that the PLF* breaks apart into and determines their angular alignment. This technique gives an opportunity to explore how the average alignment of dynamically produced fragments, $\langle$α $\rangle$ dyn , evolves with PLF* lifetime. An approximately linear relationship was determined with d$\langle$α $\rangle$ dyn /dΔt = 0.98 ± 0.08 rad / zs and 1.06 ± 0.09 rad / zs for the 35 and 45 MeV / nucleon, respectively, indicating a correlation with magnitude consistent with classically determined values which were used for prior experimental studies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

A Data-Driven Study of Rayleigh-Taylor Transition to Turbulence [Slides]

A temporal dynamics perspective of forgetting ICs; Autonomous system of neural ODEs of 0D dynamics; Steep growth of backward integration error quantifies forgetting; Does such a system exist in reality? (a low dim. dyn. sys. shadowing a projection of a high dim. dyn. sys.); Next: minimal QOIs to identify system; Extension to PDEs of 1D dynamics of DNS.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Variational and phase response analysis for limit cycles with hard boundaries, with applications to neuromechanical control problems

Motor systems show an overall robustness, but because they are highly nonlinear, understanding how they achieve robustness is difficult. In many rhythmic systems, robustness against perturbations involves response of both the shape and the timing of the trajectory. This makes the study of robustness even more challenging. To understand how a motor system produces robust behaviors in a variable environment, we consider a neuromechanical model of motor patterns in the feeding apparatus of the marine mollusk Aplysia californica (Shaw et al. in J Comput Neurosci 38(1):25–51, 2015; Lyttle et al. in Biol Cybern 111(1):25–47, 2017). We established in (Wang et al. in SIAM J Appl Dyn Syst 20(2):701–744, 2021. https://doi.org/10.1137/20M1344974) the tools for studying combined shape and timing responses of limit cycle systems under sustained perturbations and here apply them to study robustness of the neuromechanical model against increased mechanical load during swallowing. Interestingly, we discover that nonlinear biomechanical properties confer resilience by immediately increasing resistance to applied loads. In contrast, the effect of changed sensory feedback signal is significantly delayed by the firing rates’ hard boundary properties. Our analysis suggests that sensory feedback contributes to robustness in swallowing primarily by shifting the timing of neural activation involved in the power stroke of the motor cycle (retraction). This effect enables the system to generate stronger retractor muscle forces to compensate for the increased load, and hence achieve strong robustness. The approaches that we are applying to understanding a neuromechanical model in Aplysia, and the results that we have obtained, are likely to provide insights into the function of other motor systems that encounter changing mechanical loads and hard boundaries, both due to mechanical and neuronal firing properties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Simultaneous measurements of kinetic and scalar energy spectrum time evolution in the Richtmyer–Meshkov instability upon reshock

The Richtmyer–Meshkov instability (Richtmyer, Commun. Pure Appl. Maths , vol. 13, issue 2, 1960, pp. 297–319; Meshkov, Fluid Dyn. , vol. 4, issue 5, 1972, pp. 101–104) of a twice-shocked gas interface is studied using both high spatial resolution single-shot (SS) and lower spatial resolution, time-resolved, high-speed (HS) simultaneous planar laser-induced fluorescence and particle image velocimetry in the Wisconsin Shock Tube Laboratory's vertical shock tube. The initial condition (IC) is a shear layer with broadband diffuse perturbations at the interface between a helium–acetone mixture and argon. This IC is accelerated by a shock of nominal strength Mach number $M = 1.75$ , and then accelerated again by the transmitted shock that reflects off the end wall of the tube. An ensemble of experiments is analysed after reshock while the interface mixing width grows linearly with time. The kinetic and scalar energy spectra and the terms of their evolution equation are calculated and compared between SS and HS experiments. The inertial range scaling of the scalar power spectrum is found to follow Gibson's relation (Gibson, Phys. Fluids , vol. 11, issue 11, 1968, pp. 2316–2327) as a function of Schmidt number when the effective turbulent Schmidt number is used in place of the material Schmidt number that controls equilibrium scaling. Further, the spatially integrated scalar flux follows similar behaviour observed for the kinetic energy in large eddy simulation studies by Zeng et al. ( Phys. Fluids , vol. 30, issue 6, 2018, 064106) while the spatially varying scalar flux exhibits back scatter along the centre of the mixing layer and forward energy transfer in the spike and bubble regions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Six spiral galaxies lacking dark matter

Dark matter is believed to be the essential building blocks of galaxy formation. While instances of galaxies lacking dark matter have been observed, these occurrences are typically linked to specific formation mechanisms, making them stand out as unique cases. In spiral galaxies, the presence of flat rotation curves is a common observation, indicating the need for dark matter to support these dynamics. However, the galaxies displaying minimal or no dark matter are likely not exceptional cases. We report several spiral galaxies where the flat rotation areas exhibit an average dynamical to baryonic mass ratio value of M dyn /m bary ~ 1.09. The low dynamical to baryonic mass ratios indicate that the kinematics of these galaxies can be supported by their baryonic mass only. The existence of spiral galaxies devoid of dark matter suggests that, in specific scenarios, the influence of dark matter on galaxy formation may not be as universally essential as previously believed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Velocity dispersion and dynamical mass for 270 galaxy clusters in the Planck PSZ1 catalogue

Here, we present the velocity dispersion and dynamical mass estimates for 270 galaxy clusters included in the first Planck Sunyaev-Zeldovich (SZ) source catalogue, the PSZ1. Part of the results presented here were achieved during a two-year observational program, the ITP, developed at the Roque de los Muchachos Observatory (La Palma, Spain). In the ITP we carried out a systematic optical follow-up campaign of all the 212 unidentified PSZ1 sources in the northern sky that have a declination above –15° and are without known counterparts at the time of the publication of the catalogue. We present for the first time the velocity dispersion and dynamical mass of 58 of these ITP PSZ1 clusters, plus 35 newly discovered clusters that are not associated with the PSZ1 catalogue. Using Sloan Digital Sky Survey archival data, we extend this sample, including 212 already confirmed PSZ1 clusters in the northern sky. Using a subset of 207 of these galaxy clusters, we constrained the M SZ –M dyn scaling relation, finding a mass bias of (1 – B) = 0.83 ± 0.07(stat) ± 0.02(sys). We show that this value is consistent with other results in the literature that were obtained with different methods (X-ray, dynamical masses, or weak-lensing mass proxies). This result cannot dissolve the tension between primordial cosmic microwave background anisotropies and cluster number counts in the Ω M –σ 8 plane.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Tungsten–carbon surface evolution and erosion modeling for a small angle slot divertor in DIII-D

Abstract We modeled tungsten–carbon mixed surface evolution, sputtering erosion, and transport for the tungsten coated region of a small angle slot (SAS) divertor design for the DIII-D tokamak. This divertor concept aims to achieve a closed slot dissipative plasma to minimize heat load and surface erosion, and to study high- Z material performance. Our advanced simulations use coupled ITMC-DYN material mixing/response and 3D full kinetic REDEP/WBC erosion/redeposition code packages, with divertor plasma solution from the SOLPS-ITER package with 4 MW power input. The SAS design geometry and resulting in-slot plasma parameters cause significant differences in predicted sputter/transport from a conventional divertor. For 2% C/D incident plasma ratio, an equilibrium mixed C/W surface is attained at ∼30 s of discharge, from wall sputtered carbon transported to the 10 cm long tungsten divertor region. Tungsten remains exposed to the plasma, but the evolved surface composition varies with different C/D ratios. Tungsten is primarily sputtered from the mixed surface by impinging carbon ions in the +1 to +4 charge states, with some self-sputtering. Redeposition of sputtered tungsten to the divertor is significant, ∼80% along the higher plasma temperature attached plasma SAS entrance region, but this is less than the typically near-unity values for a conventional divertor. Plasma-incident carbon is highly backscattered (∼50%) from the mixed surface, with little redeposition (<10%); this helps maintain tungsten in the surface sputter zone. Carbon is mainly sputtered from the mixed surface by D + ions, also with low redeposition (∼10%–30%). Finally, the modeling shows non-zero but low sputtered tungsten current from the divertor to the core plasma direction. These results appear favorable for effective testing of a tungsten-containing SAS divertor in DIII-D, and extrapolation of mixed-material evolution/response findings to the analogous low- Z /high- Z , Be/W, ITER plasma facing system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

ELM sputter erosion modeling of a tungsten coated small angle slot divertor in DIII-D

We modeled plasma edge localized mode (ELM) sputter erosion for a Small Angle Slot divertor with a tungsten coated region (SAS-VW), designed for experiments in the DIII-D tokamak, and proposed for use in future advanced tokamaks. The simulations use a free-streaming, 1000 eV, C +6 and D +1 ELM impingement model, with SOLPS-ITER, ITMC-DYN, and REDEP/WBC code packages for background plasma, material response, and erosion/redeposition respectively. The results show ELM'ing plasma gross and net tungsten erosion fluxes of the mixed-material C/W surface peaking at the slot entrance region, and an order of magnitude higher than for non-ELMs. The per-pulse erosion, however, remains low, of order 0.5 nm, due to expected moderate ELM frequencies and duration in DIII-D. Here, the ELMs result in a ~25x higher peak sputtered W current leaving the divertor slot region, towards the core plasma, compared to the ELM-free plasma case. The time-integrated escape current, however, may not significantly affect core plasma high-Z contamination concerns, for a 1% ELM duty factor, but may be an issue for higher frequency ELMs. In general, the modeling results appear favorable for effective testing of the SAS-VW divertor in DIII-D, and extrapolation to innovative divertor designs in future ITER-like and DEMO fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

The Dynamics of the Wide-angle Tailed (WAT) Galaxy Cluster A562

We present the first in-depth dynamical analysis of the archetypal wide-angle tailed (WAT) cluster A562. We have combined Gemini observations with archival data from the literature to form a sample of 76 cluster members and derived a mean redshift of 0.1088 ± 0.0004 and a velocity dispersion of 919 ± 116 km s{sup −1}. This relatively large velocity dispersion suggests either a very massive cluster (M {sub dyn} > 6.9 × 10{sup 14} M {sub ☉}) and/or a merger system. The merger model is supported by a non-Gaussian galaxy velocity distribution, an elongated spatial distribution of likely cluster members, and an elongated X-ray emitting gas. This scenario would generate the bulk flow motion of the intracluster medium that can exert enough ram pressure to bend the radio jets. Thus, our observations support the model in which a recent off-axis merger event produced the cluster wide conditions needed to shape the WAT in A562.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The Young Massive Star Cluster Westerlund 2 Observed with MUSE. III. A Cluster in Motion—The Complex Internal Dynamics

Analyzing the dynamical state of nearby young massive star clusters is essential for understanding star cluster formation and evolution during their earliest stages. In this work we analyze the stellar and gas kinematics of the young massive star cluster Westerlund 2 (Wd2) using data from the integral field unit Multi Unit Spectroscopic Explorer (MUSE) and complement them with proper motions from the Gaia DR2. The mean gas radial velocity of 15.9 km s{sup −1} agrees with the assumption that Wd2 is the result of a cloud–cloud collision. The gas motions show the expansion of the H ii region, driven by the radiation from the many OB stars in the cluster center. The velocity profile of the cluster member stars reveals an increasing velocity dispersion with decreasing stellar mass and that the low-mass stars show five distinct velocity groups. Based on their spatial correlation with the cluster’s two clumps, we concluded that this is the imprint of the initial cloud collapse that formed Wd2. A thorough analysis of the dynamical state of Wd2, which determines a dynamical mass range of M {sub dyn,Wd2} = (7.5 ± 1.9) × 10{sup 4} − (4.4 ± 1.1) × 10{sup 5} M {sub ⊙} and exceeds the photometric mass by at least a factor of two, leads to the conclusion that Wd2 is not massive enough to remain gravitationally bound. Additionally we also identify 22 runaway candidates with peculiar velocities between 30 and 546 km s{sup −1}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

The MASSIVE Survey. XVI. The Stellar Initial Mass Function in the Center of MASSIVE Early-type Galaxies

The stellar initial mass function (IMF) is a fundamental property in the measurement of stellar masses and galaxy star formation histories. In this work, we focus on the most massive galaxies in the nearby universe $\mathrm{log}({M}_{\star }/\,{M}_{\odot })\gt 11.2$. We obtain high-quality Magellan/LDSS-3 long-slit spectroscopy with a wide wavelength coverage of 0.4–1.01 μm for 41 early-type galaxies (ETGs) in the MASSIVE survey and derive high signal-to-noise spectra within an aperture of R e /8. Using detailed stellar synthesis models, we constrain the elemental abundances and stellar IMF of each galaxy through full spectral modeling. All the ETGs in our sample have an IMF that is steeper than a Milky Way (Kroupa) IMF. The best-fit IMF mismatch parameter, α IMF = (M/L)/(M/L) MW , ranges from 1.1 to 3.1, with an average of $\langle$α IMF $\rangle$ = 1.84, suggesting that on average, the IMF is more bottom heavy than Salpeter. Comparing the estimated stellar masses with the dynamical masses, we find that most galaxies have stellar masses that are smaller than their dynamical masses within the 1σ uncertainty. We complement our sample with lower-mass galaxies from the literature and confirm that $\mathrm{log}({\alpha }_{\mathrm{IMF}})$ is positively correlated with $\mathrm{log}(\sigma )$, $\mathrm{log}({M}_{\star })$, and $\mathrm{log}({M}_{\mathrm{dyn}})$. From the combined sample, we show that the IMF in the centers of more massive ETGs is more bottom heavy. In addition, we find that $\mathrm{log}({\alpha }_{\mathrm{IMF}})$ is positively correlated with both [Mg/Fe] and the estimated total metallicity [Z/H]. We find suggestive evidence that the effective stellar surface density Σ Kroupa might be responsible for the variation of α IMF . We conclude that σ, [Mg/Fe], and [Z/H] are the primary drivers of the global stellar IMF variation.

79 ASTRONOMY AND ASTROPHYSICS↗