Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Disruptions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Toward active disruption avoidance via real-time estimation of the safe operating region and disruption proximity in tokamaks

This paper describes a real-time capable algorithm for identifying the safe operating region around a tokamak operating point. The region is defined by a convex set of linear constraints, from which the distance of a point from a disruptive boundary can be calculated. The disruptivity of points is calculated from an empirical machine learning predictor that generates the likelihood of disruption. While the likelihood generated by such empirical models can be compared to a threshold to trigger a disruption mitigation system, the safe operating region calculation enables active optimization of the operating point to maintain a safe margin from disruptive boundaries. The proposed algorithm is tested using a random forest disruption predictor fit on data from DIII-D. The safe operating region identification algorithm is applied to historical data from DIII-D showing the evolution of disruptive boundaries and the potential impact of optimization of the operating point. Real-time relevant execution times are made possible by parallelizing many of the calculation steps and implementing the algorithm on a graphics processing unit. Lastly, a real-time capable algorithm for optimizing the target operating point within the identified constraints is also proposed and simulated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Plasma steering to avoid disruptions in ITER and tokamak power plants

Steering tokamak plasmas is commonly viewed as a way to avoid disruptions and runaway electrons. Plasma steering sounds as safe as driving to work but will be shown to more closely resemble driving at high speed through a dense fog on an icy road. The long time required to terminate an ITER discharge compared to time over which dangers can be foreseen is analogous to driving in a dense fog. Here, the difficulty of regaining plasma control if it is lost resembles driving on an icy road. Disruptions and runaways are associated with three issues—a solution to one tends to complicate the solution to the other two: loss of plasma position control, excessive heat deposition, and wall melting due to runaway electrons. All three risks must be addressed for ITER to achieve its mission and essentially eliminated before tokamak power plants can be deployed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Data for Creating Yellow Seed Camelina sativa with Enhanced Oil Accumulation by CRISPR-Mediated Disruption of Transparent Testa 8

Camelina ( Camelina sativa L.), a hexaploid member of the Brassicaceae family, is an emerging oilseed crop being developed to meet the increasing demand for plant oils as biofuel feedstocks. In other Brassicas, high oil content can be associated with a yellow seed phenotype, which is unknown for camelina. We sought to create yellow seed camelina using CRISPR/Cas9 technology to disrupt its Transparent Testa 8 (TT8) transcription factor genes and to evaluate the resulting seed phenotype. We identified three TT8 genes, one in each of the three camelina subgenomes, and obtained independent CsTT8 lines containing frameshift edits. Disruption of TT8 caused seed coat colour to change from brown to yellow reflecting their reduced flavonoid accumulation of up to 44%, and the loss of a well-organized seed coat mucilage layer. Transcriptomic analysis of CsTT8-edited seeds revealed significantly increased expression of the lipid-related transcription factors LEC1, LEC2, FUS3, and WRI1 and their downstream fatty acid synthesis-related targets. These changes caused metabolic remodelling with increased fatty acid synthesis rates and corresponding increases in total fatty acid (TFA) accumulation from 32.4% to as high as 38.0% of seed weight, and TAG yield by more than 21% without significant changes in starch or protein levels compared to parental line. These data highlight the effectiveness of CRISPR in creating novel enhanced-oil germplasm in camelina. The resulting lines may directly contribute to future net-zero carbon energy production or be combined with other traits to produce desired lipid-derived bioproducts at high yields.

Biofuels↗
DOE OSTI2024

Impact of breech geometry and propellant flow on the release of large pellets for the ITER disruption mitigation system

Studies have been performed on the release mechanism for large pellets using high pressure gas in a shattered pellet injector. Typically, pellets are dislodged from the cryogenic surface and accelerated down a barrel using high pressure gas delivered by a fast-acting propellant valve. The pellets impact an angled surface which shatters the pellet into many small fragments before entering the plasma. This technique was initially demonstrated on DIII-D (Commaux et al 2016 Nucl. Fusion 56 046007) and is now deployed on JET, KSTAR, ASDEX-Upgrade, and other tokamaks around the world in support of ITER's disruption mitigation system design and physics basis. The large hydrogen, 28.5 mm diameter, 2 length-to-diameter ratio, pellets foreseen for ITER SPI operation have low material strength and low heat of sublimation, which cause the pellets to be fragile and highly reactive to the impact of warm propellant gas. Due to the size of the pellets, significantly more propellant gas is required to dislodge and accelerate them. This creates a potentially significant propellant gas removal issue as 2–6 bar-L of gas is expected to be required for release and speed control. The research presented in this paper is an in-depth exploration of the parameters that are keys to reliable pellet release and speed control. Computational fluid dynamics (CFD) modeling of propellant flows through various breech designs was conducted to determine the force generated on the back surface of a pellet. These simulations assumed the use of the ORNL designed flyer plate valve. CFD modeling combined with experimental measurements provide adequate insight to determine a path to an optimal valve and breech design for ITER SPI pellet release and speed control while minimizing propellant gas usage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

The rebrightening of a ROSAT -selected tidal disruption event: repeated weak partial disruption flares from a quiescent galaxy?

The ROSAT-selected tidal disruption event (TDE) candidate RX J133157.6-324319.7 (J1331) was detected in 1993 as a bright [0.2–2 keV flux of (1.0 ± 0.1) × 10 -12 erg s -1 cm -2 ], ultra-soft (kT = 0.11 ± 0.03 keV) X-ray flare from a quiescent galaxy (z = 0.051 89). During its fifth all-sky survey (eRASS5) in 2022, Spectrum-Roentgen-Gamma (SRG)/ eROSITA detected the repeated flaring of J1331, where it had rebrightened to an observed 0.2–2 keV flux of (6.0 ± 0.7) × 10 -13 erg s -1 cm -2 , with spectral properties (kT = 0.115 ± 0.007 keV) consistent with the ROSAT-observed flare ~30 yr earlier. In this work, we report on X-ray, ultraviolet, optical, and radio observations of this system. During a pointed XMM observation ~17 d after the eRASS5 detection, J1331 was not detected in the 0.2–2 keV band, constraining the 0.2–2 keV flux to have decayed by a factor of ≳40 over this period. Given the extremely low probability (~5 × 10 -6 ) of observing two independent full TDEs from the same galaxy over a 30 yr period, we consider the variability seen in J1331 to be likely caused by two partial TDEs involving a star on an elliptical orbit around a black hole. J1331-like flares show faster rise and decay time-scales [$\mathcal {O}(\mathrm{d})$] compared to standard TDE candidates, with negligible ongoing accretion at late times post-disruption between outbursts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Role of peracetic acid on the disruption of lignin packing structure and its consequence on lignin depolymerisation

Peracetic acid (PAA) is an effective oxidant capable of solubilising lignin and efficiently depolymerising it to selective phenolic compounds; however, the specific role by which PAA initiates the depolymerisation is still elusive. Herein, interaction between PAA and the lignin macromolecule and the consequent structural changes of the latter were studied by characterising the lignin packing structure and its associated changes during the oxidation process. While the lignin packing structure and its changes associated with the PAA-mediated oxidation were probed by X-ray diffraction, the impact of the PAA on different chemical functionalities present in the lignin structure was established by 13 C and 1 H– 13 C heteronuclear single-quantum coherence nuclear magnetic resonance (NMR) spectroscopy. Further, combining the NMR spectroscopy results, and the product distribution, we conclude that the predominant reaction pathway for the oxidative depolymerisation of lignin with PAA is the Baeyer–Villiger oxidation of the ketone formed by the oxidation of the benzylic hydroxyl group adjacent to the β-O-4 linkage. The experimental evidence provided herein corroborated that PAA instigates oxygen insertion to the lignin macromolecule resulting in disruption of its packing structures and facilitates depolymerisation. We also investigated various metal oxide and mixed metal oxide catalysts to identify effective catalysts that further enhance the efficiency of PAA-mediated depolymerisation of lignin and produce selective monomeric phenolic compounds. Techno-economic analysis was also conducted to identify the key parameters associated with this oxidative process that need to be considered for possible commercial application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Disruption event characterization and forecasting in tokamaks

Disruption prediction and avoidance is a critical need for next-step tokamaks, such as ITER. Disruption Event Characterization and Forecasting (DECAF) research fully automates analysis of tokamak data to determine chains of events that lead to disruptions and to forecast their evolution allowing sufficient time for mitigation or complete avoidance of the disruption. Disruption event chains related to local rotating or global magnetohydrodynamic (MHD) modes and vertical instability are examined with warnings issued for many off-normal physics events, including density limits, plasma dynamics, confinement transitions, and profile variations. Along with Greenwald density limit evaluation, a local radiative island power balance theory is evaluated and compared to the observation of island growth. Automated decomposition and analysis of rotating tearing modes produce physical event chains leading to disruptions. A total MHD state warning model comprised of 15 separate criteria produces a disruption forecast about 180 ms before a standard locked mode detector warning. Single DECAF event analyses have begun on KSTAR, MAST, and NSTX/-U databases with thousands of shot seconds of device operation using from 0.5 to 1 × 10 6 tested sample times per device. An initial multi-device database comparison illustrates a highly important result that plasma disruptivity does not need to increase as βN increases. Global MHD instabilities, such as resistive wall modes (RWMs), can give the briefest time period of warning before disruption compared to other physics events. In an NSTX database with unstable RWMs, the mode onset, loss of boundary and current control, and disruption event warnings are found in all cases and vertical displacement events are found in 91% of cases. An initial time-dependent reduced physics model of kinetic RWM stabilization created to forecast the disruption chain predicts instability 84% of the time for experimentally unstable cases with a relatively low false positive rate. Instances of the disruption event chain analysis illustrate dynamics including H–L back transitions for rotating MHD and global RWM triggering events. Furthermore, disruption warnings are issued with sufficient time before the disruption (on transport timescales) to potentially allow active profile control for disruption avoidance, active mode control, or mitigation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Integrated deep learning framework for unstable event identification and disruption prediction of tokamak plasmas

Abstract The ability to identify underlying disruption precursors is key to disruption avoidance. In this paper, we present an integrated deep learning (DL) based model that combines disruption prediction with the identification of several disruption precursors like rotating modes, locked modes, H-to-L back transitions and radiative collapses. The first part of our study demonstrates that the DL-based unstable event identifier trained on 160 manually labeled DIII-D shots can achieve, on average, 84% event identification rate of various frequent unstable events (like H-L back transition, locked mode, radiative collapse, rotating MHD mode, large sawtooth crash), and the trained identifier can be adapted to label unseen discharges, thus expanding the original manually labeled database. Based on these results, the integrated DL-based framework is developed using a combined database of manually labeled and automatically labeled DIII-D data, and it shows state-of-the-art (AUC = 0.940) disruption prediction and event identification abilities on DIII-D. Through cross-machine numerical disruption prediction studies using this new integrated model and leveraging the C-Mod, DIII-D, and EAST disruption warning databases, we demonstrate the improved cross-machine disruption prediction ability and extended warning time of the new model compared with a baseline predictor. In addition, the trained integrated model shows qualitatively good cross-machine event identification ability. Given a labeled dataset, the strategy presented in this paper, i.e. one that combines a disruption predictor with an event identifier module, can be applied to upgrade any neural network based disruption predictor. The results presented here inform possible development strategies of machine learning based disruption avoidance algorithms for future tokamaks and highlight the importance of building comprehensive databases with unstable event information on current machines.

plasma instabilities↗
DOE OSTI2020

Hybrid deep learning architecture for general disruption prediction across tokamaks

In this paper, we present a new deep learning disruption prediction algorithm based on important findings from explorative data analysis which effectively allows knowledge transfer from existing devices to new ones, thereby predicting disruptions using very limited disruptive data from the new devices. Here, the explorative data analysis conducted via unsupervised clustering techniques confirms that time-sequence data are much better separators of disruptive and non-disruptive behavior than the instantaneous plasma state data with further advantageous implications for a sequence-based predictor. Based on such important findings, we have designed a new algorithm for multi-machine disruption prediction that achieves high predictive accuracy on the C-Mod (AUC=0.801), DIII-D (AUC=0.947) and EAST (AUC=0.973) tokamaks with limited hyperparameter tuning. Through numerical experiments, we show that boosted accuracy (AUC=0.959) is achieved on EAST predictions by including in the training only 20 disruptive discharges, thousands of non-disruptive discharges from EAST, and combining this with more than a thousand discharges from DIII-D and C-Mod. The improvement of predictive ability obtained by combining disruptive data from other devices is found to be true for all permutations of the three devices. Furthermore, by comparing the predictive performance of each individual numerical experiment, we find that non-disruptive data are machine-specific while disruptive data from multiple devices contain device-independent knowledge that can be used to inform predictions for disruptions occurring on a new device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Hybrid deep learning architecture for general disruption prediction across tokamaks

In this paper, we present a new deep learning disruption prediction algorithm based on important findings from explorative data analysis which effectively allows knowledge transfer from existing devices to new ones, thereby predicting disruptions using very limited disruptive data from the new devices. The explorative data analysis conducted via unsupervised clustering techniques confirms that time-sequence data are much better separators of disruptive and non-disruptive behavior than the instantaneous plasma state data with further advantageous implications for a sequence-based predictor. Based on such important findings, we have designed a new algorithm for multi-machine disruption prediction that achieves high predictive accuracy on the C-Mod (AUC=0.801), DIII-D (AUC=0.947) and EAST (AUC=0.973). tokamaks with limited hyperparameter tuning. Through numerical experiments, we show that boosted accuracy (AUC=0.959) is achieved on EAST predictions by including in the training only 20 disruptive discharges, thousands of non-disruptive discharges from EAST, and combining this with more than a thousand discharges from DIII-D and C-Mod. The improvement of predictive ability obtained by combining disruptive data from other devices is found to be true for all permutations of the three devices. Furthermore, by comparing the predictive performance of each individual numerical experiment, we find that non-disruptive data are machine-specific while disruptive data from multiple devices contain device-independent knowledge that can be used to inform predictions for disruptions occurring on a new device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

ARC disruption physics and strategy

Commonwealth Fusion Systems (CFS) plans to operate a tokamak power plant called ARC in the early 2030s. Tokamak plasmas have stability limits that, if crossed, lead to a rapid termination of the plasma, referred to as a disruption. Disruptions pose a melt risk to the first wall resulting from thermal and non-thermal particle heat fluxes, and an electromagnetic loading risk on all metal components within the equilibrium coils. A comprehensive set of models is used herein to provide an assessment of both mitigated and unmitigated ARC disruption loads. A preliminary massive gas injection system is baselined and a runaway electron mitigation coil option is proposed to close possible gaps in the baseline. It is predicted that all ARC disruption loads are within a factor of 2 of the disruption loads in SPARC, a tokamak presently under construction by CFS, and therefore SPARC provides an opportunity to calibrate models, test solutions and inform the design of ARC. The goal for ARC is disruption-free operation, however, the pragmatic design target is to withstand one mitigated disruption per day, and to restart the plasma following mitigation in tens of seconds without interrupting the power output. Unmitigated disruptions must be rare, and experience with unmitigated disruption impacts in SPARC will better define what rare means. The implications of this strategy for plasma disruptivity and disruption prediction are discussed, and operating the ARC scenario on SPARC is expected to refine the ARC final design and operational plan.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Multi-device study of temporal characteristics of magnetohydrodynamic modes initiating disruptions

Disruptions in tokamaks are often preceded by magnetohydrodynamic (MHD) instabilities that can rotate or become locked to the wall. Measurements from magnetic diagnostics in the presence of MHD mode precursors to disruptions can yield potentially valuable input to the plasma control system, with a view to disruption avoidance, prediction and mitigation. This report presents an exploratory analysis of the growth of MHD modes and corresponding time scales on the basis of magnetic measurements in multiple tokamaks. To this end, a database was compiled using disruptive discharges from COMPASS, ASDEX Upgrade, DIII-D and JET, manually classified according to disruption root cause, and characterized by a great diversity of operational conditions and mode dynamics. The typical time during which a mode can be detected using saddle coils and the duration of the locked mode phase in the database both extend over several orders of magnitude, but generally the time scales increase with plasma size. Several additional factors are discussed that can influence these durations, including the disruption root cause. A scaling law for the locked phase duration was estimated, yielding predictions toward ITER of the order of hundreds of milliseconds or even seconds. In addition, a scaling law for the mode amplitude at the disruption onset, proposed earlier by de Vries et al. (2016), is applied to the database, and its predictive capabilities are assessed. Despite significant uncertainty on the predictions from both scaling laws, encouraging trends are observed of the fraction of disruptions that may be detected with sufficient warning time to allow mitigation or even avoidance, based solely on observations of MHD mode dynamics. When combined with similar analysis of measurements from diagnostics that are sensitive to other disruption precursors, our analysis methods and results may contribute to the reliability, robustness and generalization of disruption warning schemes for ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

DECAF Cross-device characterization of tokamak disruptions indicated by abnormalities in plasma vertical position and current

Abnormal (deviating from target) variations in the plasma vertical position Z and current I p (such as vertical displacements, transient I p 'spikes' and quenches) constitute common elements of a disruption, a phenomenon that is to be mitigated, or ultimately avoided in future reactor-relevant tokamaks. While those abnormalities are generally recognized cross-shot and cross-device, details in terms of appearance (or not) and order of those abnormalities in disruption event chains is bound with the plasma state at the time of the chain initiation. Detection of those abnormalities is thus indicative not only of the onset of the plasma collapse itself, but also of the disruption driving cause that is promoted at the particular plasma state. Here, occurrence of disruptions, explored via detection of a Ip quench, and analysis of disruption event chains constituted by Ip and Z abnormalities, is reported for in total 7 full years of operation of 3 devices (KSTAR, MAST-U and NSTX-U) using the DECAFTM code expanded tools and capabilities. It is shown that the disruption occurrence depends not only on details of the plasma state, but also on (device-dependent) technical elements of the shot exit scenario. A year-to-year change in main disruption causes and a reduction of the disruptivity rate, bound with device and operation upgrades, are reported. Particular trigger instances of disruption event chains (and the full chains, when applicable) are shown to occupy different parts of the operation space diagrams, in accordance with prior expectation. Plasma elongation is identified as an important factor influencing details of the chains and its role will be further explored.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Disruption modelling for engineering and physics design of ST-E1 fusion power plant

Plasma disruptions represent a critical challenge for high-performance tokamak operations, as they can compromise machine integrity and reduce operational availability. Although future fusion devices essentially need to incorporate strategies to minimise disruption occurrence, complete avoidance remains unattainable. Consequently, assessing and characterising unmitigated disruption consequences is fundamental for the design and qualification of next-generation fusion power plants. This work supports the pre-conceptual design of ST-E1, a low aspect-ratio Tokamak Fusion Power Plant developed by Tokamak Energy Ltd., by presenting a comprehensive disruption modelling approach applied across different design stages. The methodology integrates both physics and engineering considerations to evaluate the impact of disruptions on machine performance and structural integrity. From an engineering perspective, several ST-E1 layout options were analysed to investigate the electromagnetic response of key components under disruption-induced loads, enabling comparison between alternative design solutions. On the physics side, a broad set of disruption scenarios was explored, scanning operational space parameters, plasma-material interactions, and associated thermal loads. Furthermore, the study examined variations in disruption behaviour arising from different reference equilibria, focusing on a range starting from Double Null to Single Null configurations, reflecting the increasing up-down asymmetry consequences. The results reveal significant contrasts in plasma dynamics and structures electromagnetic behaviour between configurations, highlighting the importance of disruption modelling in guiding design choices. These analyses have proven instrumental in shaping ST-E1 development, offering critical insights for mitigating risks and optimising future fusion power plant designs.

Borowiec, Katarzyna [ORNL] (ORCID:0000000335911739↗
DOE OSTI2022

Disruption Prediction and Avoidance in High Beta Long Pulse KSTAR Plasmas

This research is a concentrated and coordinated experimental and physics analysis program by a small U.S. team, focused on the topical area of “Long Pulse Control” as stated in the proposal solicitation. The overall goal of the research is to produce world-class analysis regarding forecasting and avoidance of disruptions in a long-pulse, superconducting tokamak at high stability parameters (e.g. normalized beta) with direct, quantifiable figures of merit (i.e. plasma disruption rate - “disruptivity”) and its reduction based on improved stability physics and control. The research targets the backbone of the problem – the basic, main issues – to produce this quantitative analysis by: (1) Creating and applying a new physics-based paradigm to understand how to eliminate disruptions: disruption event characterization, and event chain analysis – a direct manifestation of the approach suggested in the DOE Transients Report, (2) Ensuring that the components required to produce high-quality measurements and analysis needed for disruption event characterization for the tokamak in question (here, KSTAR) exist (e.g. pressure profile peaking, high-accuracy pitch angle data, compensated low frequency toroidal mode number n = 1 mode measurement) to create a primarily physics-based disruption forecasting capability, and (3) Addressing disruption avoidance for the first time in KSTAR by attacking primary disruption ‘event chains’, utilizing the most important associated plasma measurements (dynamic n = 1 field). The focus of this work will be avoidance of macroscopic instabilities, especially global modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Solidification of SRPPF Aqueous Recovery Liquid: Process Disruptions

Savannah River National Laboratory has identified a magnesium oxysulfate grout formulation to solidify the liquid effluent from the Savannah River Plutonium Processing Facility (SRPPF) Aqueous Recovery System (ARS). The formulation uses reactive, light burnt MgO, anhydrous MgSO 4 , and dead burnt MgO and provides good mixability, similar density to the original Portland Cement-based mix, and a leachate pH of 9.39, within the assumed Waste Isolation Pilot Plant (WIPP) brine pH range. The formulation will solidify the effluent using a solid first, lost paddle design, within a 55-gallon drum. A series of seven different process disruptions, or irregular processing during the expected ARS liquid effluent solidification process, were completed to assess the severity of the impact of the process disruption and how the formulation behaves under these conditions. Seven process disruptions were investigated including: No Mixing, Partial Mixing, Compacted/Stratified, Sealed, Overfilled, Underfilled, and Undermixed. The impact on solidification, leachate pH, Er (a Pu/Am surrogate) distribution, and density of the resulting grout were established. Overall, four of the process disruptions, No Mixing, Partial Mixing, Compacted/Stratified, and Overfilled, resulted in basic, unabsorbed liquid that would require additional solidification to be acceptable for WIPP. Most solids generated in this testing met the expected WIPP leachate pH requirements. Solids from the Compacted/Stratified process disruption test, however, produced a leachate pH slightly above the assumed range in the WIPP performance assessment. The distribution of Er for most of the tests was relatively consistent. The No Mixing process disruption test, however, resulted in non-homogeneous Er distribution, indicating that radioactive material would not be evenly distributed throughout this solid’s matrix. The Overfilled test is the only mix with a density slightly below the acceptable value. The Sealed and Overmixed tests produced a solid closest to the standard mix with no unabsorbed liquid, expected leachate pH levels, consistent Er concentrations, and expected density, indicating these process disruptions do not have a negative impact on the final grout form. Based on the other process disruptions, it is critical to have premixed dry materials and a well-defined mixing process to produce a solid, homogeneous magnesium oxysulfate cement, with no unabsorbed liquid. These process disruption tests show that the lack of adequate mixing is fundamental to creating an improperly solidified material that may require remediation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Black hole-neutron star binaries near neutron star disruption limit in the mass regime of event GW230529

In May 2023, the LIGO-Virgo-KAGRA (LVK) Collaboration reported the likely black hole-neutron star (BHNS) merger GW230529_181500. The signal was observed with high significance in only one detector, limiting constraints on the black hole spin and motivating our study of disruption in this mass regime. That event is expected to be the merger of a 2.5–4.5 M ⊙ primary with a secondary compact object of mass between 1.2–2.0 M ⊙ . This makes it the first BHNS merger with a significant potential for the production of electromagnetic (EM) counterparts, and provides further evidence for compact objects existing within the suspected lower mass gap. To produce post-merger EM transients, the component of the black hole spin aligned with the orbital angular momentum must be sufficiently high, allowing the neutron star to be tidally disrupted. The disrupting BHNS binary may then eject a few percent of a solar mass of matter, leading to an observable kilonova driven by radioactive decays in ejecta, and/or a compact-binary gamma-ray burst (cbGRB) resulting from the formation of an accretion disk and relativistic jet. Determining which mergers lead to disruption of the neutron star is necessary to predict the prevalence of EM signals from BHNS mergers, yet most BHNS simulations so far have been performed far from the minimum spin required for tidal disruption. Here, we use the Spectral Einstein Code to explore the behavior of BHNS mergers in a mass range consistent with GW230529_181500 close to that critical spin, and compare our results against the mass remnant model currently used by the LVK Collaboration to predict the probability of tidal disruption. Furthermore, our numerical results reveal the emergence of non-zero accretion disks even below the predicted NS disruption limit, of low mass but capable of powering cbGRBs. Our results also demonstrate that the remnant mass model underpredicts the disk mass for the DD2 equation of state, while they are within expected modeling errors for SFHo. The disruption limit itself, however, is not found to significantly differ from the predictions of the analytical model, unless remnant masses M rem ≲ 0.001 M ⊙ prove interesting observationally. In all of our simulations, any kilonova signal would be dim and most likely dominated by post-merger disk outflows.

GW230529_181500↗