SEARCH · Engineering Papers

Results for “Dislocation Lines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Computer simulation of the motion of a straight dislocation line in concentrated solid solutions. II

An investigation was undertaken to determine if the size and modulus interaction of a solute atom with a screw dislocation and the modulus interaction with an edge dislocation contributed to strengthening, in addition to the size interaction with an edge dislocation. The results indicate that the size interaction between solute atom and an edge dislocation accounts for most of the solid solution strengthening in f.c.c. alloys. The contribution to the yield stress from the modulus interaction with an edge dislocation is less than 15%. The interaction between a solute atom and a screw dislocation is much less than that between a solute atom and an edge dislocation.

Kuo, C. T. K.↗

NASA NTRS1986

Dislocations in extruded Co-49.3 at. pct Al

Polycrystalline Co-49.3 at. pct Al, which had been extruded at 1505 K, was examined using transmission electron microscopy. Diffraction contrast analysis showed that b = 100 as well as b = 111 line dislocations contribute to elevated temperature deformation in CoAl. Therefore, it was concluded that sufficient slip systems exist in CoAl to allow for general plasticity in the absence of diffusional mechanisms. Line dislocations of the type b = 001 were observed on both 110 and 100 planes while b = 111 line dislocations were observed on 1 -1 0 planes.

Yaney, D. L.↗

DOE OSTI2025

Integral X-ray diffuse scattering for studying irradiation-induced dislocation loops in single crystals

Numerical diffuse scattering cross-section calculations are used to establish a rigorous basis for determining the concentration and size distribution of dislocation loops in irradiated single crystals from integral X-ray diffuse scattering (XRDS) measurements. Differential XRDS intensities for prismatic {111} type dislocation loops are numerically calculated as a function of loop radius R and wavevectors q relative to Bragg reflections in tungsten. The results show the well known 1/q 2 Huang scattering form at small q that transitions to a ∼1/q 4 dependence associated with the Stokes–Wilson approximation for q ≳ 1/R. More importantly, they show further that the 1/q 4 falloff is not the asymptotic large-q form of the diffuse scattering for small loops (R < 200 Å) as has often been assumed. Rather, for loop sizes as small as R ≃ 5 Å with strong curvature, the calculations show definitively that the scattering transitions to a robust 1/q 5 falloff at larger q that arises due to the local strains near the dislocation core defining the circumference of the dislocation loops. The presence of this 1/q 5 asymptotic form for both small and large loops is experimentally confirmed using an integral XRDS measurement around the 110 reflection on self-ion-irradiated tungsten combined with numerically calculated integral XRDS cross-sections. Accordingly, the historical two-region theoretical treatment of the cross-sections for integral XRDS is extended to a three-region model that has direct sensitivity to the (first-moment) dislocation line lengths of dislocation loops. In conclusion, these developments enable the use of both numerical and analytically modeled cross-sections to make accurate integral XRDS determinations of dislocation loop sizes and concentrations using modest-intensity laboratory X-ray sources.

42 ENGINEERING↗

DOE OSTI2024

Alloying effects on deformation induced microstructure evolution in copper

In this work, we investigated the effects of alloying elements on plastic deformation and microstructure evolution in polycrystalline copper (Cu) and Cu alloyed with 1 wt. % lead (Cu-1 %Pb). These materials were selected due to the size mismatch between Cu and Pb, with the latter forming precipitates at grain boundaries. Multi-modal characterization techniques, including neutron diffraction, electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM), along with finite element simulations were employed to study the deformation behavior across multiple length scales. While both Cu and Cu-1%Pb exhibited similar macroscale response and final deformation textures, both dislocation line profile analysis and TEM revealed increased dislocation density in deformed Cu-1%Pb specimens. The presence of lead precipitates also significantly affected local plastic deformation during compression, with their influence diminishing with increasing strain. These results demonstrate the complex relationships between alloying elements, plastic deformation, microstructural evolution, and material behavior under load. The insights gained from this multi-scale and multi-technique approach contribute to the fundamental understanding of microstructural evolution in immiscible alloys and are valuable for tailoring the properties of structural materials for specific engineering applications.

36 MATERIALS SCIENCE↗

NASA NTRS2014

Structural Characterization of Lateral-grown 6H-SiC am-plane Seed Crystals by Hot Wall CVD Epitaxy

The performance of commercially available silicon carbide (SiC) power devices is limited due to inherently high density of screw dislocations (SD), which are necessary for maintaining polytype during boule growth and commercially viable growth rates. The NASA Glenn Research Center (GRC) has recently proposed a new bulk growth process based on axial fiber growth (parallel to the c-axis) followed by lateral expansion (perpendicular to the c-axis) for producing multi-faceted m-plane SiC boules that can potentially produce wafers with as few as one SD per wafer. In order to implement this novel growth technique, the lateral homoepitaxial growth expansion of a SiC fiber without introducing a significant number of additional defects is critical. Lateral expansion is being investigated by hot wall chemical vapor deposition (HWCVD) growth of 6H-SiC am-plane seed crystals (0.8mm x 0.5mm x 15mm) designed to replicate axially grown SiC single crystal fibers. The post-growth crystals exhibit hexagonal morphology with approximately 1500 m (1.5 mm) of total lateral expansion. Preliminary analysis by synchrotron white beam x-ray topography (SWBXT) confirms that the growth was homoepitaxial, matching the polytype of the respective underlying region of the seed crystal. Axial and transverse sections from the as grown crystal samples were characterized in detail by a combination of SWBXT, transmission electron microscopy (TEM) and Raman spectroscopy to map defect types and distribution. X-ray diffraction analysis indicates the seed crystal contained stacking disorders and this appears to have been reproduced in the lateral growth sections. Analysis of the relative intensity for folded transverse acoustic (FTA) and optical (FTO) modes on the Raman spectra indicate the existence of stacking faults. Further, the density of stacking faults is higher in the seed than in the grown crystal. Bundles of dislocations are observed propagating from the seed in m-axis lateral directions. Contrast extinction analysis of these dislocation lines reveals they are edge type basal plane dislocations that track the growth direction. Polytype phase transition and stacking faults were observed by high-resolution TEM (HRTEM), in agreement with SWBXT and Raman scattering.

Single Crystal↗

NASA NTRS1985

Damping and modulus measurements in B2 transition metal aluminides

The polycrystalline intermetallic alloys FeAl (50.9 to 58.2 percent Fe), NiAl (49.2 to 55.9 percent Ni) and CoAl (48.5 to 52.3 percent Co) have the B2 structure and are of interest for high temperature applications. The PUCOT (piezoelectric ultrasonic composite oscillator technique) has been used to measure mechanical damping or internal friction and Young's modulus has been used as a function of temperature and composition for these materials. The modulus data for six CoAl alloys at temperatures up to 1300 K are presented. Examples are given of the strain amplitude dependence of internal friction for four CoAl alloys. The curves showed the break away phenomenon and are interpreted in terms of a theory dealing with the pinning of dislocation lines and their eventual break away at large strain amplitudes. The dislocation density was calculated to be about 10 to the 8th per sq m. For all the compositions (X1) of CoAl studied, a single equation could be fitted to the data.

Harmouche, M. R.↗

DOE OSTI2025

Quantifying dislocation-type defects in post irradiation examination via transfer learning

The quantitative analysis of dislocation-type defects in irradiated materials is critical to materials characterization in the nuclear energy industry. The conventional approach of an instrument scientist manually identifying any dislocation defects is both time-consuming and subjective, thereby potentially introducing inconsistencies in the quantification. This work approaches dislocation-type defect identification and segmentation using a standard open-source computer vision model, YOLO11, that leverages transfer learning to create a highly effective dislocation defect quantification tool while using only a minimal number of annotated micrographs for training. This model demonstrates the ability to segment both dislocation lines and loops concurrently in micrographs with high pixel noise levels and on two alloys not represented in the training set. Inference of dislocation defects using transmission electron microscopy on three different irradiated alloys relevant to the nuclear energy industry are examined in this work with widely varying pixel noise levels and with completely unrelated composition and dislocation formations for practical post irradiation examination analysis. Code and models are available at https://github.com/idaholab/PANDA.

36 MATERIALS SCIENCE↗

NASA NTRS1991

Identification of dislocation etch pits in n-type GaAs by NIR transmission microscopy

An optical method is described for identifying dislocation etch pits in n-type GaAS, using near-IR brightfield transmission microscopy. Dislocations are revealed in a nondestructive manner through contrasts that are likely due to impurity decoration of the dislocation lines. By subjecting the same wafers to a photoetching technique, it was established that each etch pit on the surface is associated with a dislocation and that the termination of each (decorated) dislocation is an etch pit.

Cao, X. Z.↗

DOE OSTI2024

Nanocompression of 20 nm Silver Nanoparticles: In situ Aberration‐Corrected TEM and Atomistic Simulations

Single‐crystalline nanoparticles play an increasingly important role in a wide variety of fields including pharmaceuticals, advanced materials, catalysts for fuel cells, energy materials, as well as environmental detection and monitoring. Yet, the deformation mechanisms of very small nanoparticles are still poorly understood, in particular the role played by single dislocations and their interaction with surfaces. Here, in this work, silver nanoparticles with particularly small dimensions (≈20 nanometers in diameter) are compressed in situ in an aberration‐corrected transmission electron microscopy (TEM) and molecular dynamics (MD) simulations. During compression, the emergence of both dislocations and nanotwins are observed. However, these defects prove to be unstable and disappear upon removal of the indenter. Atomistic simulations confirm the role played by image stresses associated with the nearby surfaces and the reduction in dislocation line length as it approaches the free surface, thereby supporting the experimental observations. These results provide justification for the frequent observation of the absence of dislocations in nanoparticles of a few nanometers in size during in situ experiments, even after significant deformation. This phenomenon contributes to the self‐healing of samples through dislocation ejection toward the surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1990

The effect of frictional stress on the calculation of critical thickness in epitaxy

A model is developed for lattice-mismatched epitaxial layers, which makes it possible to calculate both the equilibrium critical thickness as well as the kinetic rate of misfit accommodations. The technique for calculating the equilibrium critical thickness is similar to that of Matthews (1966) in that it uses the force balance approach and the Volterra description of the dislocation line. For the kinetic component of misfit accommodation, the model uses a dynamic frictional force. A simple criterion is proposed for determining whether the generation of misfit dislocations will be controlled by the equilibrium or the kinetic factors.

Fox, Bradley A.↗

DOE OSTI2024

Application of Weak-Beam Dark-Field STEM for Dislocation Loop Analysis

Nanoscale dislocation loops formed by irradiation can significantly contribute to both irradiation hardening and embrittlement of materials when subjected to extreme nuclear reactor environments. Here, this study explores the application of weak-beam dark-field (WBDF) scanning transmission electron microscopy (STEM) methods for quantitative irradiation-induced defect analysis in crystalline materials, with a specific focus on dislocation loop imaging and analysis. A high-purity Fe-5 wt% Cr model alloy was irradiated with 8 MeV Fe 2+ ions at 450°C to a fluence of 8.8 × 10 19 m -2 , inducing dislocation loops for analysis. While transmission electron microscopy (TEM) has traditionally been the primary tool for dislocation imaging, recent advancements in STEM technology have reignited interest in using STEM for defect imaging. This study introduces and compares three WBDF STEM methods, demonstrating their effectiveness in suppressing background contrasts, isolating defect information for dislocation loop type classification, providing finer dislocation line images for small loop analysis, and presenting inside–outside contrast for identifying loop nature. Experimental findings indicate that WBDF STEM methods surpass traditional TEM approaches, yielding clearer and more detailed images of dislocation loops. The study concludes by discussing the potential applications of WBDF STEM techniques in defect analysis, emphasizing their adaptability across various material systems beyond nuclear materials.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Modeling the contributions to acoustic nonlinearity from complex dislocation networks using 3D dislocation dynamics

Nonlinear ultrasonic parameters are highly sensitive to microstructural features that affect macroscale material behavior, providing a nondestructive means to characterize their evolution. Although dislocations are known to be a strong source of acoustic nonlinearity, establishing quantitative links between the acoustic nonlinearity parameter (β), measured via Second Harmonic Generation, and dislocation morphology—such as dislocation length and density—remains an open challenge. This work advances the numerical modeling of dislocation–β relationships using 3D dislocation dynamics (DD) simulations in two approaches: a “static” method computing strain and stress fields from dislocation configurations in the absence of external loading, and a “quasi-static” method to estimate β from the curvature of dislocation lines under applied load. First, the static method is combined with finite element analysis to investigate a recent assertion that heterogeneous initial strain fields can induce higher harmonic generation in a linear elastic medium; the present results do not corroborate this outcome. Then, the quasi-static method is applied to multiple-dislocation scenarios through parametric studies, revealing behaviors not predicted by analytical models, such as the competing interactions of edge and screw dislocations and the significant influence of applied stress on β. Finally, the simulations are used to model SHG experimental results and validate the hypothesis that β can decrease during plastic deformation, despite increasing dislocation density. As the DD code used here is open-source, it provides a practical platform for future investigation into microstructure–β relationships important to the interpretation of SHG results.

Materials science↗

DOE OSTI2025

Tunable energy landscape of screw dislocation cores by compositional fluctuations in bcc high-entropy alloys from first-principles calculations

The energy landscape of screw dislocation cores plays a central role in dislocation-mediated deformation mechanisms in body-centered cubic (bcc) metals. In bcc high-entropy alloys (HEAs), this energy landscape is modulated by local compositional fluctuations, which has important implications for deformation processes in these materials. Through first-principles calculations, this study investigates high-symmetry screw dislocation core structures in NbTaMoW and NbTaTiHf bcc HEAs. The results show that alloying group IV transition metals lead to large local lattice distortions at dislocation cores, which is demonstrated to be an important factor governing fluctuations in core configurations along a dislocation line. Importantly, group IV elements near the core induce features in the energy landscape that are exclusive for HEAs, specifically lowering the energy of core configurations that are unstable in elemental bcc metals. A combined influence of these chemical effects with crystallographic details enables the activation of glide planes, a feature that has been linked to ductility improvements in bcc HEAs. These findings provide new insights into the atomic-scale mechanisms underlying dislocation mobility in bcc HEAs, offering a pathway for designing materials with tailored mechanical properties.

Borges, Pedro P P O↗

DOE OSTI2026

Temperature and dose rate effects on dislocation loop formation and decoration in self-ion irradiated high-purity Fe-Cr model alloys

Body-centered cubic (BCC) Fe-based alloys are promising candidate materials for advanced nuclear reactors. A widespread perception is that the addition of Cr favors the formation of ½ <111> dislocation loops. However, the Cr effects on dislocation loop formation/evolution remain unclear due to the limited experimental studies. In this study, we irradiate ultra-high purity bulk BCC Fe-xCr (x = 3, 5, and 8 wt%) with 6.7-8 MeV Fe ions over a wide range of temperatures (Tirr = 250-500 °C) and dose rates (10⁻⁵ to 10⁻³ dpa/s) to two midrange doses (0.35 and 3.5 dpa). The major irradiation-induced microstructures are loop decoration along non-screw dislocation lines at low temperatures and high dose rates as well as self-assembled loops at elevated temperatures. Post-irradiation Burgers vector analysis via g•b method on loops and electron tomography reveals that <001> preponderance is observable in all irradiated Fe-Cr samples at elevated temperature, resulting from stronger elastic energy originating from <001> edge.

Li, Yao [University of Tennessee (UT)]↗

DOE OSTI2024

Microstructural evolution of compositionally complex solid-solution alloys under in-situ dual-beam irradiation

Here, this work attempts to link the microstructural evolution of single-phase compositionally complex alloy (CCA) compositions under dual-beam irradiation to their Mn-content via the stacking-fault energy (SFE) and vacancy migration energies. Two alloys, Cr 18 Fe 27 Mn 27 Ni 28 and Cr 15 Fe 35 Mn 15 Ni 35 , along with less compositionally complex pure Ni and Fe 56 Ni 44 binary were irradiated at 500 and 600 °C under dual-beam 1 MeV Kr 2+ and 16 keV He + heavy-ions up to 7 displacements per atom (dpa) with a He/dpa ratio of 0.75 %/dpa using in situ transmission electron microscopy (TEM). Due to the bubble-stabilizing effect of implanted He, bubbles were observed in all irradiations, and populations of faulted interstitial loops were characterized in Cr 18 Fe 27 Mn 27 Ni 28 and Cr 15 Fe 35 Mn 15 Ni 35 . A reduction in swelling was observed in the two CCAs compared to pure Ni and Fe 56 Ni 44 . Although swelling increased from 500 to 600 °C in Fe 56 Ni 44 , Cr 15 Fe 35 Mn 15 Ni 35 and Cr 18 Fe 27 Mn 27 Ni 28 both swelled slightly more at 500 °C. This was attributed to the difference in vacancy mobility, stronger pinning effect of vacancies on He, and the sink strength of faulted dislocation loops. Faulted interstitial loops nucleated with a higher number density and dislocation line density in Cr 15 Fe 35 Mn 15 Ni 35 at both temperatures, and at 600 °C in both materials. The differences in faulted loop population and temperature effect on swelling are correlated to the Mn-content and the measured SFE (20.2 ± 6.7 mJ/m 2 for Cr 18 Fe 27 Mn 27 Ni 28 and 9.2 ± 3.4 mJ/m 2 for Cr 15 Fe 35 Mn 15 Ni 35 ).

36 MATERIALS SCIENCE↗

DOE OSTI2026

In situ TEM annealing of neutron-irradiated Ti reveals a two-stage mechanism for elevated temperature radiation damage recovery

Understanding how irradiation-induced defects evolve at elevated temperatures is of critical importance to predicting materials' behavior under steady-state and accident scenarios. However, such mechanistic insight into microstructural evolution is limited by the nature of ex situ annealing and subsequent imaging. Here we show direct observation and quantification of defect recovery in neutron-irradiated Ti using in situ transmission electron microscopy (TEM) annealing experiments. In agreement with our prior work, and at temperatures below the irradiation temperature (T irr = 300 °C), dislocation loops are observed to glide. At elevated temperatures (>500 °C), dislocation lines become mobile and promote significant recovery of the microstructure. These mechanisms challenge the established electron irradiation-based model for radiation damage recovery, which originally suggests dissolution of static defect clusters, and demonstrates the importance of in situ characterization in understanding defect evolution in irradiated materials.

Hirst, Charles A. [Univ. of Michigan, Ann Arbor, M↗

DOE OSTI2025

The influence of V-defects, leakage, and random alloy fluctuations on the carrier transport in red InGaN MQW LEDs

Red InGaN-based light-emitting diodes (LEDs) exhibit lower internal quantum efficiencies than violet, blue, and green InGaN LEDs due to a reduction in radiative recombination rates relative to non-radiative recombination rates as the Indium composition increases. Additionally, the larger polarization and band offset barriers between high indium content InGaN quantum wells and GaN quantum barriers increase the forward voltage. In blue and green LEDs, random alloy fluctuations and V-defects play a key role in reducing the forward voltage. When V-defects are present, either naturally or intentionally introduced, they create an alternative path for carrier injection into the MQWs through the V-defect sidewalls. This injection mechanism explains the turn-on voltages of green LEDs. However, in InGaN red LEDs, these two phenomena do not reduce the forward voltage as effectively as in blue and green LEDs, and consequently, the computed forward voltage remains significantly higher than the measured one. Furthermore, currents are observed at low voltages before the turn-on voltage (V<ℏω/e=2.0 V) of red LEDs. To address this, we introduce dislocation-induced tail states in the modeling, suggesting that leakage current through these states may play a significant role both below and at turn-on voltages. The simulation also indicates that leakage carriers below turn-on accumulate, partially diffuse in the QWs, screen the polarization-induced barrier in the low injection regime, and further reduce the forward voltage. Despite these beneficial effects, a drawback of dislocation-induced tail states is the enhanced nonradiative recombination in the dislocation line region. This study provides a detailed analysis of device injection physics in InGaN QW red LEDs and outlines potential optimization strategies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2026

TEM Approaches for Microstructure-Informed Prediction of Mechanical Properties in Structural Alloys

Predicting the mechanical performance of structural alloys from their evolving microstructure remains a major challenge in materials science, particularly for nuclear structural materials, where irradiation-induced defects span multiple types and length scales and interact through complex mechanisms. The dispersed barrier hardening (DBH) [1] and Friedel–Kroupa–Hirsch (FKH) [2,3] models have been widely used to evaluate the hardening contributions of individual obstacles and to estimate tensile strength from quantified microstructures; however, when multiple size-dependent obstacles coexist and evolve, predicting temperature-dependent tensile strength becomes significantly more complex, and a fully consistent hardening model is still lacking. Transmission electron microscopy (TEM) plays a central role in refining hardening models and enabling predictive assessments of tensile strength evolution by providing quantitative characterization of dislocations, irradiation-induced defects (e.g., dislocation loops and cavities), precipitates, and grain structure (Fig. 1.). These experimentally measured defect densities are incorporated into physically based hardening models with size- and shape- dependent obstacle strengths [4], using root-sum-square superposition for obstacles of comparable strength and linear superposition for dissimilar ones [5]. In addition, recent advances in TEM [6-8], including high-resolution imaging, 4D-STEM strain mapping, EDS/EELS elemental analysis, and flash-polishing-based TEM specimen preparation and extraction-replica methods (Fig. 2), further improve the accuracy of microstructural quantification. By comparison with prior studies as well as our own results, we show that when TEM-derived microstructural information is carefully integrated with physically grounded hardening models, yield strength (or irradiation-induced hardening) measured at room temperature can be predicted with good quantitative agreement across multiple alloy classes. In-situ TEM combined with high-temperature mechanical testing represents an important next step for refining hardening models by directly probing dislocation–obstacle interactions across varying irradiation doses and temperatures [9]. Because the barrier strength factor (α) depends on both temperature and obstacle size, it should not be treated as a constant fitting parameter; rather, it must be explicitly evaluated to achieve physically meaningful predictions of mechanical behaviour at operating temperatures. This presentation therefore discusses why all strengthening contributions (e.g., Peierls stress, solid-solution strengthening, voids, bubbles, dislocation loops, dislocation lines, and grain boundaries) must be considered collectively, why appropriate superposition methods are essential when obstacles possess different barrier strength factors, how hardness measurements can be meaningfully related to tensile properties, and how TEM-derived microstructural information can be systematically incorporated into hardening models. More broadly, it outlines a pathway toward microstructure-informed prediction of mechanical properties and supports the goal of establishing science-based tools for evaluating structural materials in extreme environments [10].

Lin, Yan-Ru [ORNL] (ORCID:0000000339991473)↗