Engineering PapersSearch

SEARCH · Engineering Papers

Results for “Derivative couplings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Wind tunnel determination of dynamic cross-coupling derivatives - A new approach

The latest developments in the NAE ongoing dynamic stability research program are briefly summarized. Emphasis is placed on the recently developed wind-tunnel data reduction procedures used to obtain cross and cross-coupling derivatives due to an oscillatory motion. These procedures, which account for the dynamic behaviour of the model-balance subsystem, are described for the balance configurations currently in use. The principles on which they are based, however, are quite general and can therefore be applied to other balance configurations. Two full-model dynamic stability apparatuses are described and typical results, obtained from dynamic calibrations as well as from wind-tunnel experiments, are presented.

Hanff, E. S.

Measurement of dynamic direct and cross-coupling derivatives due to oscillatory roll

An oscillatory roll apparatus is described with which the complete set of moment and force derivatives due to an oscillation in roll can be obtained in a wind tunnel. A newly developed technique to reduce the dynamic data originating from the four-component balance used with the above apparatus is briefly presented. The technique is intended to account for the dynamic behavior of the model-balance subsystem in the presence of motions in the various degrees of freedom allowed by the balance webs. Finally, results obtained from both dynamic calibration as well as wind-tunnel tests are shown.

Hanff, E. S.

Subsonic roll oscillation experiments on the Standard Dynamics Model

The experimental determination of the subsonic roll derivatives of the Standard Dynamics Model, which is representative of a current fighter aircraft configuration, is described. The direct, cross and cross-coupling derivatives are presented for angles of attack up to 41 deg and sideslip angles in the range from -5 deg to 5 deg, as functions of oscillation frequency. The derivatives exhibited significant nonlinear trends at high incidences and were found to be extremely sensitive to sideslip angle at angles of attack near 36 deg. The roll damping and dynamic cross derivatives were highly frequency dependent at angles of attack above 30 deg. The highest values measured for the dynamic cross and cross-coupling derivatives were comparable in magnitude with the maximum roll damping. The effects of oscillation amplitude and Mach number were also investigated, and the direct derivatives were correlated with data from another facility.

Beyers, M. E.

Chelators whose affinity for calcium is decreased by illumination

The present invention discloses a group of calcium chelating compounds which have a descreased affinity for calcium following illumination. These new compounds contain a photolabile nitrobenzyl derivative coupled to a tetracarboxylate Ca.sup.2+ chelating parent compound having the octacoordinate chelating groups characteristic of EGTA or BAPTA. In a first form, the new compounds are comprised of a BAPTA-like chelator coupled to a single 2-nitrobenzyl derivative, which in turn is a photochemical precursor of a 2-nitrosobenzophenone. In a second form, the new compounds are comprised of a BAPTA-like chelator coupled to two 2-nitrobenzyl derivatives, themselves photochemical prcursors of the related 2-nitrosobenzophenones. The present invention also discloses a novel method for preparing 1-hydroxy- or 1-alkoxy-1-(2-nitroaryl)-1-aryl methanes. Methanes of this type are critical to the preparation of, or actually constitute, the photolabile Ca.sup.2+ chelating compounds disclosed and claimed herein.

Tsien, Roger Y.

Regiochemical control of monolignol radical coupling: a new paradigm for lignin and lignan biosynthesis

BACKGROUND: Although the lignins and lignans, both monolignol-derived coupling products, account for nearly 30% of the organic carbon circulating in the biosphere, the biosynthetic mechanism of their formation has been poorly understood. The prevailing view has been that lignins and lignans are produced by random free-radical polymerization and coupling, respectively. This view is challenged, mechanistically, by the recent discovery of dirigent proteins that precisely determine both the regiochemical and stereoselective outcome of monolignol radical coupling. RESULTS: To understand further the regulation and control of monolignol coupling, leading to both lignan and lignin formation, we sought to clone the first genes encoding dirigent proteins from several species. The encoding genes, described here, have no sequence homology with any other protein of known function. When expressed in a heterologous system, the recombinant protein was able to confer strict regiochemical and stereochemical control on monolignol free-radical coupling. The expression in plants of dirigent proteins and proposed dirigent protein arrays in developing xylem and in other lignified tissues indicates roles for these proteins in both lignan formation and lignification. CONCLUSIONS: The first understanding of regiochemical and stereochemical control of monolignol coupling in lignan biosynthesis has been established via the participation of a new class of dirigent proteins. Immunological studies have also implicated the involvement of potential corresponding arrays of dirigent protein sites in controlling lignin biopolymer assembly.

NASA Discipline Plant Biology

Studies of the dynamics of the twin-lift system

A full set of equations of motion for the twin lift system, linearized about a hover trim condition were derived and presented. It is shown that this full set of equations of motion decouples into simpler sets of equations of motion if the aerodynamic coupling derivatives of the helicopters are neglected. One of these decoupled sets of equations of motion (referred to as the planar set) was studied at length. The other decoupled set (referred to as the nonplanar set) is examined here. It is shown that when the geometric configuration of the twin-lift is symmetric that a further decoupling is possible into antisymmetric and symmetric sets of equations. One set of these reduced equations of motion referred to as the antisymmetric set is directly equivalent to the longitudinal motion of a single helicopeter with a sling load. The second set, referred to as the symmetric set corresponds to the rotation of the entire system without load motion. As in the case of the planar symmetric motion, the location of the tether attachment point influences the stability of the nonplanar symmetric mode. The trend is opposite however in the nonplanar case in that an attachment point below the helicopter center of gravity gives a favorable effect on the stability. The effect is not as strong however as the unfavorable effect on the planar symmetric mode.

Curtiss, H. C., Jr.

Dynamic stability testing of aircraft - Needs versus capabilities

Highlights of a recent survey of the future needs for dynamic stability information for such aerospace vehicles as the Space Shuttle and advanced high-performance military aircraft, indicating the importance of obtaining this information for high-angle-of-attack high-Reynolds-number conditions. A review of the wind-tunnel capabilities in North America for measuring dynamic stability derivatives reveals an almost total lack of such capabilities for Mach numbers above 0.1 at angles of attack higher than 25 deg. In addition, capabilities to obtain certain new cross-coupling derivatives and information on effects of the coning motion are almost completely lacking. Recommendations are made regarding equipment that should be constructed to remedy this situation.

Orlik-Rueckemann, K. J.

Slice-Based Formal Specification Measures -- Mapping Coupling and Cohesion Measures to Formal Z

This paper demonstrates that existing slice-based measures can reasonably be mapped to the field of state-based specification languages. By making use of Z specifications this contribution renews the idea of slice-profiles and derives coupling and cohesion measures for them. The measures are then assessed by taking a critical look at their sensitiveness in respect to modifications on the specification source. The presented study shows that slice-based coupling and cohesion measures have the potential to be used as quality indicators for specifications as they reflect the changes in the structure of a specification as accustomed from their program-related pendants.

Bollin, Andreas

GLACE: The Global Land-Atmosphere Coupling Experiment: Overview - Part 1

GLACE is a model intercomparison study focusing on a typically neglected yet critical element of numerical weather and climate modeling: land-atmosphere coupling strength, or the degree to which anomalies in land surface state (e.g., soil moisture) can affect rainfall generation and other atmospheric processes. The twelve AGCM groups participating in GLACE performed a series of simple numerical experiments that allow the objective quantification of this element. The derived coupling strengths vary widely. Some similarity, however, is found in the spatial patterns generated by the models, enough similarity to pinpoint multi-model "hot spots" of land-atmosphere coupling. For boreal summer, such hot spots for precipitation and temperature are found over large regions of Africa, central North America and India; a hot spot for temperature is also found over eastern China. The design of the GLACE simulations are described in full detail so that any interested modeling group can repeat them easily and thereby place their model s coupling strength within the broad range of those documented here.

Koster, Randal D.

Deriving Albedo from Coupled MERIS and MODIS Surface Products

MERIS Level 2 surface reflectance products are now available to the scientific community. This paper demonstrates the production of MERIS-derived surface albedo and Nadir Bidirectional Reflectance Distribution Function (BRDF) adjusted reflectances by coupling the MERIS data with MODIS BRDF products. Initial efforts rely on the specification of surface anisotropy as provided by the global MODIS BRDF product for a first guess of the shape of the BRDF and then make use all of the coincidently available, partially atmospherically corrected, cloud cleared, MERIS observations to generate MERIS-derived BRDF and surface albedo quantities for each location. Comparisons between MODIS (aerosol-corrected) and MERIS (not-yet aerosol-corrected) surface values from April and May 2003 are also presented for case studies in Spain and California as well as preliminary comparisons with field data from the Devil's Rock Surfrad/BSRN site.

Gao, Feng

On aerodynamic coupling between lateral and longitudinal degrees of freedom

An oscillatory technique for routine measurement of all the direct, cross and cross-coupling moment derivatives due to pitching and yawing has been developed and a series of comprehensive results at Mach numbers 0.7 and 0.25 and at angles of attack up to 40 deg has been obtained in a large wind tunnel. It was found that some of the dynamic cross-coupling derivatives, that at low angles of attack were all zero, at higher angles of attack could reach values that rendered the pertinent cross-coupling terms in the equations of motion comparable in magnitude to the well-established damping terms. Large nonlinear variations with angle of attack were observed in many of the measured derivatives including the important damping-in-pitch and damping-in-yaw derivatives. It was concluded that it may be desirable to include some dynamic cross-coupling derivatives, and the functional variation with angle of attack of many derivatives, in the equations of motion, and to consider all these equations simultaneously, rather than in separate longitudinal and lateral groups.

Orlik-Rueckemann, K. J.

Finite Element Analysis of Poroelastic Composites Undergoing Thermal and Gas Diffusion

A theory for time-dependent thermal and gas diffusion in mechanically time-rate-independent anisotropic poroelastic composites has been developed. This theory advances previous work by the latter two authors by providing for critical transverse shear through a three-dimensional axisymmetric formulation and using it in a new hypothesis for determining the Biot fluid pressure-solid stress coupling factor. The derived governing equations couple material deformation with temperature and internal pore pressure and more strongly couple gas diffusion and heat transfer than the previous theory. Hence the theory accounts for the interactions between conductive heat transfer in the porous body and convective heat carried by the mass flux through the pores. The Bubnov Galerkin finite element method is applied to the governing equations to transform them into a semidiscrete finite element system. A numerical procedure is developed to solve the coupled equations in the space and time domains. The method is used to simulate two high temperature tests involving thermal-chemical decomposition of carbon-phenolic composites. In comparison with measured data, the results are accurate. Moreover unlike previous work, for a single set of poroelastic parameters, they are consistent with two measurements in a restrained thermal growth test.

Salamon, N. J.

A Semiclassical Derivation of the QCD Coupling

The measured value of the QCD coupling alpha(sub s) at the energy M(sub Zo), the variation of alpha(sub s) as a function of energy in QCD, and classical relativistic dynamics are used to investigate virtual pairs of quarks and antiquarks in vacuum fluctuations. For virtual pairs of bottom quarks and antiquarks, the pair lifetime in the classical model agrees with the lifetime from quantum mechanics to good approximation, and the action integral in the classical model agrees as well with the action that follows from the Uncertainty Principle. This suggests that the particles might have small de Broglie wavelengths and behave with well-localized pointlike dynamics. It also permits alpha(sub s) at the mass energy twice the bottom quark mass to be expressed as a simple fraction: 3/16. This is accurate to approximately 10%. The model in this paper predicts the measured value of alpha(sub s)(M(sub Zo)) to be 0.121, which is in agreement with recent measurements within statistical uncertainties.

Batchelor, David

Electronic energy states

One-electron wave functions are reviewed and approximate solutions of two-electron systems are given in terms of these one-electron functions. The symmetry effects associated with electron spin are reviewed and the effects of electron exchange on energy levels of the two-electron system are given. The coupling of electronic orbital and spin angular momentum is considered next and the Lande interval rule for Russell-Saunders or LS coupling is derived. The configurations possible for various multi-electron LS couplings are enumerated (examples from the first two rows of the periodic table are given), and the meaning of the spectroscopic nomenclature is discussed, particularly with respect to the degeneracies of the electron states involved. Next the nomenclature, symmetries, and degeneracies for electron states of diatomic molecules are discussed, and some examples for N2, O2, and NO are presented. The electronic partition functions and derivative thermodynamic properties are expressed in terms of these energies and degeneracies, and examples are given for some of the simple gas species encountered in the earth's atmosphere.

Source record

A current access, self-structured, multilayered bubble domain memory

Preliminary experimental results are reported on a self-structured, multilayer bubble memory with buried data layer. Stripe domains are used to move carrier bubbles by magnetostatic coupling. An expression is derived for that coupling as a function of thickness of the GGG separation layer. Experimental values of coupling are given as a function of bias field. An expression for stripe curvature as a function of bias field is derived. The performance of seven different current access stripe propagation circuits is reported.

Stermer, R. L., Jr.

Gain-assisted Superluminal Propagation in Coupled Optical Resonators

We predict transparent superluminal pulse propagation in co-resonant coupled optical resonators, when a gain element is placed in the resonator closest to the excitation waveguide, provided the structure is over-coupled, but the resonator farthest from the excitation waveguide is under-coupled sufficiently to avoid lasing at the split modes. The effective steady-state absorptive and dispersive response of coupled resonators is derived, and the coupled-mode approximation is used to determine the conditions for transparent superluminal pulse propagation in these systems.

Chang, Hongrok