Examination of the thermal variation of the mean square atomic displacements in zinc and evaluation of the associated Debye temperature.
Mean square atomic displacements variation with temperature in Zn, evaluating Debye temperature
Katz, J. L.↗
SEARCH · Engineering Papers
Results for “Debye temperature”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Measurements of the thermal variation of the X-ray Debye temperature of pure nickel and chromium.
X-ray Debye temperature thermal variation measurements of pure nickel and chromium
SINGLE CRYSTAL↗
An empirical relationship between thermal conductivity and Debye temperature for silicates
Silicates thermal conductivity-Debye temperature relationship from thermal conductivity and acoustic data, applying to earth conductivity measurements
Horai, K.-I.↗
Equation Of State With Temperature Effects For Solids
Behavior at high temperature predicted from only four parameters. Equations derived to express thermodynamical properties of compressed solids at high temperatures. New equations based on fundamental considerations of thermodynamics, isothermal equation of state, and assumption thermal pressure independent of volume and varies linearly with temperature near and about Debye temperature. Using only four parameters (three are those of isothermal equation of state), new equations describe thermodynamic behavior of material over range of temperatures from approximately Debye temperature to melting point.
Vinet, Pascal↗
Superconducting compounds and alloys research
Resistivity measurements as a function of temperature were performed on alloys of the binary material system In sub(1-x) Bi sub x for x varying between 0 and 1. It was found that for all single-phase alloys (the pure elements, alpha-In, and the three intermetallic compounds) at temperatures sufficiently above the Debye-temperature, the resistivity p can be expressed as p = a sub o T(n), where a sub o and n are composition-dependent constants. The same exponential relationship can also be applied for the sub-system In-In2Bi, when the two phases are in compositional equilibrium. Superconductivity measurements on single and two-phase alloys can be explained with respect to the phase diagram. There occur three superconducting phases (alpha-In, In2Bi, and In5Bi3) with different transition temperatures in the alloying system. The magnitude of the transition temperatures for the various intermetallic phases of In-Bi is such that the disappearance or occurrence of a phase in two component alloys can be demonstrated easily by means of superconductivity measurements.
Otto, G.↗
Pressure and temperature dependences of the isotropic elastic moduli of polycrystalline alumina.
Pressure and temperature dependence of isotropic elastic moduli of polycrystalline alumina, noting Gruneisen parameter, equation of state and Debye temperature
Chung, D. H.↗
Elastic constants of molybdenum-rich rhenium alloys in the temperature range -190 deg C to plus 100 deg C.
Adiabatic elastic constants of molybdenum-rich rhenium alloys, studying concentration effects on bulk modulus, Debye temperatures and interatomic forces
Brotzen, F. R.↗
The gas-grain interaction in the interstellar medium - Thermal accommodation and trapping
The paper develops a numerical model for calculating thermal accommodation coefficients alpha sub T and trapping functions f sub t for gases incident on solid surfaces. The method is especially designed for astrophysical applications in that it treats economically and with moderate accuracy (+ or - 20%) the dependences of alpha sub T and f sub t on finite and different surface and gas temperatures for a large number of gas-surface combinations. In particular, the method is applied to the astrophysical combinations of hydrogen and helium gases incident on graphite, silicon, and ice surfaces. Graphs are presented of the dependence of alpha sub T and f sub t on interstellar gas temperatures in the range of 10 to 10,000 K and grain temperatures in the range 10 to 1000 K, assuming the current estimates of the gas-surface physical parameters such as the composition and the Debye temperature of the grain material, the repulsive range of the surface potential, and the gas-grain adsorption energy.
Burke, J. R.↗
Properties of Single Crystalline Semiconducting CoSb3
A study of the thermoelectric properties of the skutterudite compound CoSb3 was carried out on single crystals grown by the Bridgman gradient freeze technique. p- and n-type samples were obtained over a wide range of carrier concentration. Undoped As-grown crystals show p-type conductivity while n-type samples were obtained by addition of Te or Pd. Samples were characterized by x-ray diffractometry, electron microprobe analysis, and density measurements. The physical properties of CoSb3 such as linear thermal expansion coefficient, sound velocity, and Debye temperature were also determined and are presented. Seebeck coefficient, electrical resistivity, thermal conductivity, and Hall effect measurements were performed between room temperature and about 900 K. Exceptionally high Hall mobilities were obtained on p-type samples with a maximum room-temperature Hall mobility of 3300 sq cm/V.s at a carrier concentration of 1 x 10(exp 17)/cc. The results of the transport property measurements are discussed and are in agreement with some recent predictions based on band structure calculations. The potential of CoSb3 for thermoelectric applications is evaluated.
Caillat, T.↗
Low-temperature anharmonicity and the Debye- Waller factor.
Debye-Waller factor factorization facilitates experimental data analysis to yield low temperature anharmonicity gauge
Dash, J. G.↗
Dielectric behavior of semiconductors at microwave frequencies
A cylindrical microwave resonant cavity in TE(011) (Transverse Electric) mode is used to study the dielectric relaxation in germanium and silicon. The samples of these semiconductors are used to perturb the electric field in the cavity, and Slater's perturbation equations are used to calculate the real and imaginary parts of the dielectric constant. The dielectric loss of germanium and silicon is studied at different temperatures, and Debye's equations are used to calculate the relaxation time at these temperatures.
Dahiya, Jai N.↗
Effect of double layers on magnetosphere-ionosphere coupling
The Earth's auroral zone contains dynamic processes occurring on scales from the length of an auroral zone field line which characterizes Alfven wave propagation to the scale of microscopic processes which occur over a few Debye lengths. These processes interact in a time-dependent fashion since the current carried by the Alfven waves can excite microscopic turbulence which can in turn provide dissipation of the Alfven wave energy. This review will first describe the dynamic aspects of auroral current structures with emphasis on consequences for models of microscopic turbulence. A number of models of microscopic turbulence will be introduced into a large-scale model of Alfven wave propagation to determine the effect of various models on the overall structure of auroral currents. In particular, the effects of a double layer electric field which scales with the plasma temperature and Debye length is compared with the effect of anomalous resistivity due to electrostatic ion cyclotron turbulence in which the electric field scales with the magnetic field strength. It is found that the double layer model is less diffusive than in the resistive model leading to the possibility of narrow, intense current structures.
Lysak, Robert L.↗
Characteristic temperatures of the Mossbauer fraction and thermal-shift measurements in iron and iron salts.
Measurement of Mossbauer spectra in metallic iron, sodium nitroprusside, sodium ferrocyanide, and potassium ferrocyanide absorbers between 78 and 293 K. The temperature dependences of the Mossbauer fraction and the resonant velocity were fitted to Einstein and Debye lattice-vibration models. The characteristic temperatures of the models fitted to the Mossbauer fraction are consistently lower than those fitted to the resonant velocity showing the sensitivity of the Mossbauer fraction to low-frequency modes of vibration. The characteristic temperatures obtained from the resonant velocity are higher for the salts than for the metal, indicating the presence of higher-frequency modes in the salts. This interpretation is verified semiquantitatively by comparing the thermal-shift Debye temperatures of the salts to their infrared absorption frequencies. The Mossbauer fraction of potassium ferrocyanide shows a weaker temperature dependence than that expected for a harmonic solid, which suggests that potassium ferrocyanide is anharmonic in the temperature range studied.
Lafleur, L. D.↗
Thermodynamics of two-dimensional plasmas or discrete line vortex fluids
The equilibrium properties of a two-dimensional plasma are examined theoretically within the framework of the random-phase approximation. The guiding-center case is of most interest because of the formal equivalence to two-dimensional discrete-line vortex fluids and because of the formal admissibility of negative temperatures. Using a judicious treatment of the periodic boundary conditions, extensive thermodynamics for nonnegative temperatures and a new value for the energy at which the temperature becomes negative are found. An explicit form for the structure function is derived and compared with the result of a Monte Carlo calculation. Good agreement is found for the negative-temperature-threshold prediction and for the general shape of the structure function. An equilibrium energy spectrum is calculated, which for positive temperatures, is the Debye-Hueckel result; for negative temperatures, it predicts an enhanced excitation of the lowest mode, corresponding to macroscopic charge separation.
Seyler, C. E., Jr.↗
Computer program calculates the effective temperature for a crystalline solid /DETS/
Computer program computes and prints out both the Debye and resulting effective temperatures for each Debye model-dependent average energy per vibrational mode, Debye-Waller factor, and specific heat. The program calculates by the trapezodial rule and then Simpsons rule.
Johnston, A. S.↗
Effect of double layers on magnetosphere-ionosphere coupling
The dynamic aspects of auroral current structures are reviewed with emphasis on consequences for models of microscopic turbulence (MT). A number of models of MT are introduced into a large-scale model of Alfven wave propagation to determine the effect of various models on the overall structure of auroral currents. The effect of a double layer (DL) electric field which scales with the plasma temperature and the Debye length is compared with the effect of anomalous resistivity due to electrostatic ion cyclotron turbulence in which the electric field scales with the magnetic field strength. It is shown that the DL model is less diffusive than the resistive model, indicating the possibility of narrow intense current structures.
Lysak, Robert L.↗
Thruster Plume Plasma Diagnostics: A Ground Chamber Experiment for a 2-Kilowatt Arcjet
Although detailed near field (0 to 3 cm) information regarding the exhaust plume of a two kilowatt arc jet is available (refs. 1 to 6), there is virtually little or no information (outside of theoretical extrapolations) available concerning the far field (2.6 to 6.1 m). Furthermore real information about the plasma at distances between (3 to 6 m) is of critical importance to high technology satellite companies in understanding the effect of arc jet plume exhausts on space based power systems. It is therefore of utmost importance that one understands the exact nature of the interaction between the arc jet plume, the spacecraft power system and the surrounding electrical plasma environment. A good first step in understanding the nature of the interactions lies in making the needed plume parameter measurements in the far field. All diagnostic measurements are performed inside a large vacuum system (12 m diameter by 18 m high) with a full scale arc jet and solar array panel in the required flight configuration geometry. Thus, necessary information regarding the plume plasma parameters in the far field is obtained. Measurements of the floating potential, the plasma potential, the electron temperature, number density, density distribution, debye length, and plasma frequency are obtained at various locations about the array (at vertical distances from the arc jet nozzle: 2.6, 2.7, 2.8, 3.2, 3.6, 4.0, 4.9, 5.0, 5.4, 5.75, and 6.14 m). Plasma diagnostic parameters are measured for both the floating and grounded configurations of the arc jet anode and array. Spectroscopic optical measurements are then acquired in close proximity to the nozzle, and contamination measurements are made in the vicinity of the array utilizing a mass spectrometer and two Quartz Crystal Microbalances (QCM's).
Galofaro, Joel T.↗
Thermodynamic properties and theoretical rocket performance of hydrogen to 100,000 K and 1.01325 x 10 to the 8th power N/sq m
The composition and thermodynamic properties were calculated for 100 to 110,000 K and 1.01325 x 10 to the 2nd power to 1.01325 x 10 to the 8th power N/sq m for chemical equilibrium in the Debye-Huckel and ideal-gas approximations. Quantities obtained were the concentrations of hydrogen atoms, protons, free electrons, hydrogen molecules, negative hydrogen ions, hydrogen diatomic molecular ions, and hydrogen triatomic molecular ions, and the enthalpy, entropy, average molecular weight, specific heat at constant pressure, density, and isentropic exponent. Electronically excited states of H and H2 were included. Choked, isentropic, one-dimensional nozzle flow with shifting chemical equilibrium was calculated to the Debye-Huckel and ideal-gas approximations for stagnation temperatures from 2500 to 100,000 K. The mass flow per unit throat area and the sonic flow factor were obtained. The pressure ratio, temperature, velocity, and ideal and vacuum specific impulses at the throat and for pressure ratios as low as 0.000001 downstream were found. For high temperatures at pressures approaching 1.01325 x 10 to the 8th power N/sq m, the ideal-gas approximation was found to be inadequate for calculations of composition, precise thermodynamic properties, and precise nozzle flow. The greatest discrepancy in nozzle flow occurred in the exit temperature, which was as much as 21 percent higher when the Debye-Huckel approximation was used.
Patch, R. W.↗