Engineering PapersSearch

SEARCH · Engineering Papers

Results for “Data Inference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

LIMS data - Inferred stratospheric distribution of NOx and HOx trace constituents and the calculated odd nitrogen budget

LIMS, SAMS, SBUV and in-situ data have been used to infer species not measured but which are of photochemical interest, e.g., O(3P), O(1D), NO, N2O5, OH, HO2, ClO and HCl. (LIMS = limb infrared monitor of the stratosphere; SAMS = stratospheric and mesospheric sounder; and SBUV = solar backscattered ultraviolet instrument.) Production and loss of odd nitrogen have been calculated and estimates have been made of the odd nitrogen transport due to adiabatically driven circulation derived from LIMS data. Data used from LIMS include O3, NO2, HNO3, H2O and T. CH4 and N2O were taken from SAMS and the UV solar flux from the SBUV instrument. Species were inferred for periods in October, December, March and May. Results for December are discussed. Results indicate: (1) maximum stratospheric odd nitrogen levels of 25 ppbv; (2) evidence of odd nitrogen transport from the mesosphere appearing at 25 km in the wintertime polar latitudes; (3) the polar night build-up of high levels of N2O5 beginning after the autumnal equinox; and (4) the possibility of large downward fluxes of odd nitrogen into the troposphere during the winter at latitudes poleward of 60 degrees.

Callis, L. B.

Using Polarimetric SAR Data to Infer Soil Moisture from Surfaces with Varying Subsurface Moisture Profiles

A time-series approach is used to estimate the moisture content-based on polarimetric SAR data. It is found that under the assumption of constant soil moisture, empirically observed relationships between radar backscatter and moisture are only half as sensitive to moisture as compared to actual radar data. A numerical finite element method is used to calculate the radar backscatter for rough soils with arbitrarily varying soil moisture as a function of depth. Several instance of drying and wetting moisture profiles are considered and the radar backscatter is calculated in each case. Radar backscatter is found to crucially depend on the soil moisture variation in the top half wavelength of soil.

subsurface sensing

Review of Skin Friction Measurements Including Recent High-Reynolds Number Results from NASA Langley NTF

This paper reviews flat plate skin friction data from early correlations of drag on plates in water to measurements in the cryogenic environment of The NASA Langley National Transonic Facility (NTF) in late 1996. The flat plate (zero pressure gradient with negligible surface curvature) incompressible skin friction at high Reynolds numbers is emphasized in this paper, due to its importance in assessing the accuracy of measurements, and as being important to the aerodynamics of large scale vehicles. A correlation of zero pressure gradient skin friction data minimizing extraneous effects between tests is often used as the first step in the calculation of skin friction in complex flows. Early data compiled by Schoenherr for a range of momentum thickness Reynolds numbers, R(sub Theta) from 860 to 370,000 contained large scatter, but has proved surprisingly accurate in its correlated form. Subsequent measurements in wind tunnels under more carefully controlled conditions have provided inputs to this database, usually to a maximum R(sub Theta) of about 40,000. Data on a large axisymmetric model in the NASA Langley National Transonic Facility extends the upper limit in incompressible R(sub Theta) to 619,800 using the van Driest transformation. Previous data, test techniques, and error sources ar discussed, and the NTF data will be discussed in detail. The NTF Preston tube and Clauser inferred data accuracy is estimated to be within -2 percent of a power-law curve fit, and falls above the Spalding theory by 1 percent at R(sub Theta) of about 600,000.

Watson, Ralph D.

Interhemispheric comparison of atmospheric circulation features as evaluated from Nimbus satellite data

The report includes a complete analyses of O3 data inferred from Nimbus-3 measurements, a discussion of future areas of study, description of the regression and inversion methods developed to infer atmospheric temperature and tropopause characteristics, as well as the plan to process the satellite data for a systematic study of the relative circulation differences between Northern and Southern Hemispheres.

Reiter, E. R.

The use of thermal infrared images in geologic mapping

Thermal infrared image data can be used as an aid to geologic mapping. Broadband thermal data between 8 and 13 microns is used to measure surface temperature, from which surface thermal properties can be inferred. Data from aircraft multispectral scanners at Pisgah, California which include a broadband thermal channel along with several visible and near-IR spectral channels permit better discrimination between rock type units than the same data set without the thermal data. Data from the HCMM satellite and from aircraft thermal scanners also make it possible to monitor moisture changes in Death Valley, California. Multispectral data in the same 8-13 micron wavelength range can be used to discriminate between surface materials with different spectral emission characteristics, as demonstrated with both aircraft scanner and ground spectrometer data.

Kahle, A. B.

Temporal Decrease in Upper Atmospheric Chlorine

We report a steady decrease in the upper stratospheric and lower mesospheric abundances of hydrogen chloride (HCl) from August 2004 through January 2006, as measured by the Microwave Limb Sounder (MLS) aboard the Aura satellite. For 60(deg)S to 60(deg)N zonal means, the average yearly change in the 0.7 to 0.1 hPa (approx.50 to 65 km) region is -27 +/- 3 pptv/year, or -0.78 +/- 0.08 percent/year. This is consistent with surface abundance decrease rates (about 6 to 7 years earlier) in chlorine source gases. The MLS data confirm that international agreements to reduce global emissions of ozone-depleting industrial gases are leading to global decreases in the total gaseous chlorine burden. Tracking stratospheric HCl variations on a seasonal basis is now possible with MLS data. Inferred stratospheric total chlorine (CITOT) has a value of 3.60 ppbv at the beginning of 2006, with a (2-sigma) accuracy estimate of 7%; the stratospheric chlorine loading has decreased by about 43 pptv in the 18-month period studied here. We discuss the MLS HCl measurements in the context of other satellite-based HCl data, as well as expectations from surface chlorine data. A mean age of air of approx. 5.5 years and an age spectrum width of 2 years or less provide a fairly good fit to the ensemble of measurements.

chlorine

Crustal magnetization and temperature at depth beneath the Yilgarn block, Western Australia inferred from Magsat data

Variations in crustal magnetization along a seismic section across the Archean Yilgarn block of Western Australia inferred from Magsat data are interpreted as a subtle thermal effect arising from variations in depth to the Curie isotherm. The isotherm lies deep within the mantle of the eastern part of the province, but transects the crust-mantle transition and rises well into the crust on the western side. The model is consistent with heat flow variations along the section line. The mean crustal magnetization implied by the model is approximately 2 A/m. The temperature variation implied by the model is consistent with the hypothesis that the crust-mantle transition seen seismically corresponds to the mafic granulite-eclogite phase transition within a zone of igneous crustal underplating.

Mayhew, M. A.

Identification of the projectile at the Brent crater, and further considerations of projectile types at terrestrial craters

An analysis of impact melt samples from a drill hole at the Brent crater in Ontario for siderophile trace elements indicative of meteoritic contamination, has resulted in 823-857 m-deep basalt melt zone samples enriched in Ir, Os, Pd, Ni, Co, Cr and Se over basement. The abundance pattern suggests a chondritic projectile and, from a Ni-Cr correlation of 10 melt samples, an L or LL chondrite is inferred. Data from the Manicouagan, Mitastin, and Zhamanshin craters are also assessed, and large differences in siderophile element concentrations are found among the tektites which otherwise have similar chemical compositions. There are now four known craters formed by chondrites, with Brent being the smallest among them.

Palme, H.

Maxwell currents under thunderstorms

Time variations observed in thunderstorm electric fields may be interpreted in terms of a total Maxwell current density, varying slowly with time in the intervals between lightning discharges, which can be used to estimate and map thunderstorms. Using the quasi-static behavior of the Maxwell current density, an expression is derived for the field-dependent current density under a thunderstorm during the field recovery following a lightning discharge. Values of air conductivity under the small storm which range from 2 to 6 x 10 to the -13th mho/m are inferred. Data are presented which indicate that the area-average Maxwell current is not usually affected by lightning, and instead varies slowly throughout the evolution of the storm. In light of this, it is suggested that cloud electrification processes probably do not depend on the cloud electric field as much as on the more slowly varying storm dynamics and meteorological structure.

Krider, E. P.

Directional emittance corrections for thermal infrared imaging

A simple measurement technique for measuring the variation of directional emittance of surfaces at various temperatures using commercially available radiometric IR imaging systems was developed and tested. This technique provided the integrated value of directional emittance over the spectral bandwidth of the IR imaging system. The directional emittance of flat black lacquer and red stycast, an epoxy resin, measured using this technique were in good agreement with the predictions of the electromagnetic theory. The data were also in good agreement with directional emittance data inferred from directional reflectance measurements made on a spectrophotometer.

Daryabeigi, Kamran

Directional emittance surface measurement system and process

Apparatus and process for measuring the variation of directional emittance of surfaces at various temperatures using a radiometric infrared imaging system. A surface test sample is coated onto a copper target plate provided with selective heating within the desired incremental temperature range to be tested and positioned onto a precision rotator to present selected inclination angles of the sample relative to the fixed positioned and optically aligned infrared imager. A thermal insulator holder maintains the target plate on the precision rotator. A screen display of the temperature obtained by the infrared imager, and inclination readings are provided with computer calculations of directional emittance being performed automatically according to equations provided to convert selected incremental target temperatures and inclination angles to relative target directional emittance values. The directional emittance of flat black lacquer and an epoxy resin measurements obtained are in agreement with the predictions of the electromagnetic theory and with directional emittance data inferred from directional reflectance measurements made on a spectrophotometer.

Puram, Chith K.

Sensitivity of Simulated Radiative Emission from Nitrogen Flows to Chemical Parameters

Numerical models of hypersonic flows rely on chemistry data inferred from experiments and quantum calculations. Experiments from NASA's Electric Arc Shock Tube (EAST) measure the spectral emission of strong shocks in pure nitrogen flows. These spectral profiles are only approximately captured by numerical simulations. To address these discrepancies, one wishes to calibrate some of the chemical parameters to better match experiment. Because there are hundreds of parameters in the numerical model, a sensitivity analysis was carried out on the entire chemistry database to determine which parameters are most important to analyze in the future. In order to perform this work it was necessary to generate a consistent chemical database that interfaced with both the CFD and line-by-line radiation solver. Using Monte Carlo methods, the total Sobol index was calculated for important parameters. Twenty parameters were identified as important across the nitrogen system. However, it was noted that in some spectral regions, the parametric uncertainty was unable to bound EAST measurements. Further improvements could be made by increasing the parameter uncertainties or addressing other sources of modeling error.

Kaelan B Hansson

Sensitivity of Simulated Radiative Emission from Nitrogen Flows to Chemical Parameters

Numerical models of hypersonic flows rely on chemistry data inferred from experiments and quantum calculations. Experiments from NASA's Electric Arc Shock Tube (EAST) measure the spectral emission of strong shocks in pure nitrogen flows. These spectral profiles are only approximately captured by numerical simulations. To address these discrepancies, one wishes to calibrate some of the chemical parameters to better match experiment. Because there are hundreds of parameters in the numerical model, a sensitivity analysis was carried out on the entire chemistry database to determine which parameters are most important to analyze in the future. In order to perform this work it was necessary to generate a consistent chemical database that interfaced with both the CFD and line-by-line radiation solver. Using Monte Carlo methods, the total Sobol index was calculated for important parameters. Twenty parameters were identified as important across the nitrogen system. However, it was noted that in some spectral regions, the parametric uncertainty was unable to bound EAST measurements. Further improvements could be made by increasing the parameter uncertainties or addressing other sources of modeling error.

Kaelan Hansson