SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The selection of the necessary and sufficient number of Duralumin samples in determining the surface energy of metal aviation components is considered. The surface energy is determined by measuring the contact potential difference, which depends on the electron work function for the samples. The number of samples for measuring the contact potential difference must be no less than five.
A cathode discharge source coupled to a deceleration unit for anion beam generation is described. The discharge source, made of stainless steel or duralumin electrodes and Macor insulators, is attached to the exit nozzle valve plate at one end, and to an Einzel lens to the other end. Subsequently, a cylindrical retardation unit is attached to the Einzel lens to decelerate the ions in order to optimize the laser beam interaction time required for spectroscopic investigations. The compact device is able to produce beam intensities of the order of 2 × 10{sup 12} anions/cm{sup 2} s and 20 μrad of angular divergence with kinetic energies ranging from 30 to 120 eV. Using distinct gas mixtures for the supersonic expansion together with a linear time-of-flight spectrometer, anions of great relevance in molecular astrophysics like, for example, H{sub 2}{sup −}, C{sub 3}H{sup −}, C{sub 2}{sup −}, C{sub 2}H{sup −}, HCN{sub 2}{sup −}, CO{sub 2}{sup −}, CO{sub 2}H{sup −}, C{sub 4}{sup −}, C{sub 4}H{sup −}, C{sub 5}H{sub 4}{sup −}, C{sub 5}H{sub 6}{sup −}, C{sub 7}N{sup −}, and C{sub 10}N{sup −} were produced. Finally, in order to demonstrate the capability of the experimental technique the photodetachment cross-section of the metastable H{sub 2}{sup −}, predominantly in the (v = 0, J = 26) state, was measured following laser excitation at λ{sub exc}= 565 nm obtaining a value of σ{sub ph}= 0.04 Å. To the best of our knowledge, it is the first time that this anion cross-section has been measured.
An analytical model of the spectrum of thermally stimulated surface plasmon polaritons (TSSPPs) coming to the edge of a linear conducting sample has been developed. It has been found that the spectrum of such TSSPPs obeys neither the Wien law nor the Stefan–Boltzmann law for thermal radiation. The maximum of this spectrum is shifted to the low-frequency region with respect to the spectrum of the absolutely black body, and the magnitude of the shift is proportional to the sample length. The plasmon nature of the intensity increment of thermal radiation from the edge of a plane face of a duralumin sample has been verified experimentally. It has been shown that the intensity and spectrum of this increment can be controlled both by the sample temperature and by the extension of the face.
The effect of cyclic loading on the magnitude of coherent scattering regions (CSR) of X-ray radiation and microstresses of the II type in various crystalline materials: semiconductor (samarium sulfide) and metal (steel, duralumin) has been found. The loading was carried out by compressing the samples in various ways: all-round, uniaxial, bending compression. It is shown that with an increase in the number of compression cycles, the CSR values in all cases decrease, and the microstresses increase. These values can serve as parameters to assess the degree of mechanical fatigue of the material.