Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cs(SO2)2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

12 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Materials Data on Cs(SO2)2 by Materials Project

Cs(SO2)2 crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional. there are two inequivalent Cs sites. In the first Cs site, Cs is bonded in a 10-coordinate geometry to two equivalent S and eight O atoms. Both Cs–S bond lengths are 3.84 Å. There are a spread of Cs–O bond distances ranging from 3.13–3.56 Å. In the second Cs site, Cs is bonded in a 10-coordinate geometry to ten O atoms. There are a spread of Cs–O bond distances ranging from 3.13–3.67 Å. There are four inequivalent S sites. In the first S site, S is bonded in a bent 120 degrees geometry to two O atoms. Both S–O bond lengths are 1.46 Å. In the second S site, S is bonded in a trigonal non-coplanar geometry to one S and three O atoms. The S–S bond length is 2.14 Å. There are a spread of S–O bond distances ranging from 1.46–1.48 Å. In the third S site, S is bonded in a 4-coordinate geometry to two equivalent Cs and two S atoms. The S–S bond length is 2.16 Å. In the fourth S site, S is bonded in a trigonal non-coplanar geometry to one S and three O atoms. There is one shorter (1.46 Å) and two longer (1.47 Å) S–O bond length. There are eight inequivalent O sites. In the first O site, O is bonded in a single-bond geometry to two Cs and one S atom. In the second O site, O is bonded in a single-bond geometry to one Cs and one S atom. In the third O site, O is bonded in a distorted single-bond geometry to three Cs and one S atom. In the fourth O site, O is bonded in a distorted single-bond geometry to two equivalent Cs and one S atom. In the fifth O site, O is bonded in a distorted single-bond geometry to three Cs and one S atom. In the sixth O site, O is bonded in a distorted single-bond geometry to two equivalent Cs and one S atom. In the seventh O site, O is bonded in a single-bond geometry to three Cs and one S atom. In the eighth O site, O is bonded in a single-bond geometry to two Cs and one S atom.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on CsC2S2N(O2F3)2 by Materials Project

(Cs(SO2)2)2N2(CF3)4 crystallizes in the monoclinic C2/c space group. The structure is two-dimensional and consists of eight ammonia molecules; sixteen fluoroform molecules; and two Cs(SO2)2 sheets oriented in the (1, 0, 0) direction. In each Cs(SO2)2 sheet, Cs1+ is bonded in a 7-coordinate geometry to seven O2- atoms. There are a spread of Cs–O bond distances ranging from 3.13–3.36 Å. There are two inequivalent S2+ sites. In the first S2+ site, S2+ is bonded in a bent 120 degrees geometry to two O2- atoms. Both S–O bond lengths are 1.45 Å. In the second S2+ site, S2+ is bonded in a bent 120 degrees geometry to two O2- atoms. Both S–O bond lengths are 1.45 Å. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a single-bond geometry to two equivalent Cs1+ and one S2+ atom. In the second O2- site, O2- is bonded in a single-bond geometry to one Cs1+ and one S2+ atom. In the third O2- site, O2- is bonded in a single-bond geometry to two equivalent Cs1+ and one S2+ atom. In the fourth O2- site, O2- is bonded in a distorted single-bond geometry to two equivalent Cs1+ and one S2+ atom.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Interstellar sulfur chemistry

The results of a chemical model of SO, CS, and OCS chemistry in dense clouds are summarized. The results are obtained from a theoretical study of sulfur chemistry in dense interstellar clouds using a large-scale time-dependent model of gas-phase chemistry. Among the results are the following: (1) owing to activation energy, the reaction of CS with O atoms is efficient as a loss mechanism of CS during the early phases of cloud evolution or in hot and oxygen-rich sources such as the KL nebula; (2) if sulfur is not abnormally depleted in dense clouds, then the observed abundances of SO, SO2, H2S, CS, OCS, H2CS, and SiS indicate that sulfur is mostly atomic in dense clouds; and (3) OCS is stable against reactions with neutral atoms and radicals in dense clouds.

Prasad, S. S.↗
NASA NTRS1992

SO in starburst galaxies

The use of SO and SO2 as probes of the dense interstellar medium in the nearby starburst galaxies NGC 253 and M82 is described. Emission in the 99.3 GHz 3(2) - 2(1) rotational transition of SO was detected in NGC 253 and possibly in M82, and upper limits are reported for emission in the 219.9 GHz 6(5) - 5(4) transition of SO and two lines of SO2. The column density of SO relative to carbon sulfide, CS, is more than 0.08 in NGC 253, a value not much lower than Galactic ratios and consistent with models of dense interstellar clouds with a fractional abundance of atomic oxgyen greater than about 10 exp -7. The 218.8 GHz 3(21) - 2(20) transition of para-formaldehyde, with an excitation temperature of 68 K, was also detected in NGC 253.

Petuchowski, S. J.↗
NASA NTRS2021

Investigation of several proxies to estimate sulfuric acid concentration in volcanic plume conditions

Sulfuric acid (H2SO4) is commonly accepted as a key precursor for atmospheric new particle formation (NPF). However, direct measurements of [H2SO4] remain challenging, thus preventing the determination of this important quantity, and, consequently, a complete understanding of its contribution to the NPF process. Several proxies have been developed to bridge the gaps, but their ability to predict [H2SO4] in very specific conditions such as those encountered in volcanic plumes (including in particular high sulphur dioxide mixing ratios) has not been evaluated so far. In this context, the main objective of the present study was to develop new proxies for daytime [H2SO4] in volcanic plume conditions and compare their performance to that of the proxies available in the literature. In specific, the data collected at Maïdo during the OCTAVE 2018 campaign, in the volcanic eruption plume of the Piton de la Fournaise, were first used to derive seven proxies based on the knowledge of sulphur dioxide (SO2) mixing ratio, global radiation, condensation sink (CS) and relative humidity (RH). In three of the seven proxies (F1–F3), all variables were given equal weight in the prediction of [H2SO4], while adjusted powers were allowed for the different variables in the other four proxies (A1–A4). Proxies A1–A4 were overall found to perform better compared to F1–F3, with, in specific, improved predictive ability for [H2SO4] > 2 × 108 per cu.cm. The CS was observed to play an important role in regulating [H2SO4], while, in contrast, the inclusion of RH did not improve the predictions. A last expression accounting for an additional sink term related to cluster formation, S1, was also tested and showed a very good predictive ability over the whole range of measured [H2SO4]. The newly developed proxies were in a second step further evaluated using airborne measurements performed in the passive degassing plume of Etna during the STRAP 2016 campaign. Increased correlations between observed and predicted [H2SO4] were obtained when the dependence of predicted [H2SO4] over CS was the lowest, and when the dependence over [SO2] was concurrently the highest. The best predictions were finally retrieved by the simple formulation of F2 (in which [SO2] and radiation alone were assumed to explain the variations of [H2SO4] with equal contributions), with a pre factor adapted to the STRAP data. All in all, our results illustrate the fairly good capacity of the proxy available in the literature to describe [H2SO4] in volcanic plume conditions, but highlight at the same time the benefit of the newly developed proxies for the prediction of the highest concentrations ([H2SO4] > 2–3 × 108 per cu.cm). Also, the contrasting behaviours of the new proxies in the two investigated datasets indicate that in volcanic plumes like in other environments, the relevance of a proxy can be affected by changes in environmental conditions, and that location specific coefficients do logically improve the predictions.

new particle formation↗
NASA NTRS1986

Effects of stellar outflows on interstellar sulfur oxide chemistry

Interferometer Maps with 2" to 6" resolution of a number of regions with active star formation (Orion A, W49, W51, SGRB2) show that the distribution of the molecule SO is very compact around stellar outflow sources. Both SO and SO2 were studied near three outflows, OrionA/IRc2 and two sources in W49. The two molecules have similar distributions and abundances. More than 95% of the emission comes from regions whose extents are only .05 to .2 pc., being larger around the more energetic sources. Their spectra are broad, 30 km/sec or more, suggesting that the oxide production is associated with the flows. The outflows are identified by water masers and by extended bipolar flows in SiO. Maps in other molecules, such as HCO+ and CS, which have similar collisional excitation requirements, have much greater spatial extent. Thus it appears that the SO and SO2 abundances are truly compact and are closely associated with the outflows.

Welch, W. J.↗
NASA NTRS2011

Centimeter, Millimeter, and Submillimeter Observations of Comet l03P/Hartley 2

The close approach (0.12 AU) of Comet 103P/Hartley 2 to the Earth only 8 days prior to perihelion provided a unique opportunity to probe the chemical composition of this object. Additionally, supporting data was acquired during the EPOXI (Extrasolar Planet Observation and Deep Impact Extended Investigation) flyby mission [1], which provided high resolution infrared spectra and images. Observations were conducted from four facilities, contributing to the large ground-based consortium organized in support of the EPOXI mission [2]. The Arizona Radio Observatory's 12m telescope, Kitt Peak, AZ, and Submillimeter telescope, Mt. Graham, AZ, as well as the James Clerk Maxwell Telescope, Mauna Kea, HI and the Greenbank 100m telescope, Greenbank, WV, were employed for this study covering 20 cm, 3 cm, and 0.8-3 mm. Data were obtained, collectively, from 12 October 2010 to 5 November 2010 [3]. HCN, CH3OH, H2CO, HNC, OH, and CS were detected, and upper limits on the abundance of H2S, SO2, c-C3H2, and deuterated isotopologues of HCN, H2CO, and H2O were measured. Upper limits on the D/H ratio derived from DCN gave D/H less than 0.01[3]. Detailed analysis of these data will help constrain the temperature, abundances, variance or periodicity of a given species, and can be compared to results from other comets, as well as support the data obtained from the EPOXI mission. The full analysis and comparison will be presented.

Milam, Stefanie N.↗
NASA NTRS2021

Sulfur Molecules in Space by X-rays: A Computational Study

X-ray astronomy lacks high resolution spectra of interstellar dust analogues and molecules, severely hampering interstellar medium studies based on upcoming X-ray missions. Various theoretical approaches may be used to address this problem, but they must first be shown to reproduce reliable spectra compared to the experiment. In this work, we calculate the sulfur Kedge X-ray absorption spectra of H2S, SO2, and OCS, whose spectra are already known from X-ray experiments and predict the X-ray spectrum of CS, which as far as we are aware has not been measured, thereby hampering its detection by X-ray telescopes. We chose these four molecules as the astrochemistry of sulfur is an unsolved problem and as the four molecules are already known to exist in space. We consider three types of methods for modeling the X-ray spectra: more accurate calculations with the algebraic-diagrammatic construction (ADC) and the CC2, CCSD, and CC3coupled cluster (CC) approaches as well as more affordable ones with transition potential density functional theory (TP-DFT). A comparison of our computational results to previously reported experimental spectra shows that the core−valence separation (CVS)approaches CVS-ADC(2)-x and CVS-CC3 generally yield a good qualitative level of agreement with the experiment, suggesting that they can be used for interpreting measured spectra, while the TP-DFT method is not reliable for these molecules. However, quantitative agreement with the experiment is still outside the reach of the computational methods studied in this work.

Goranka Bilalbegovic↗
NASA NTRS1996

Comet Shoemaker-Levy 9, Jupiter, and Impact Shock Chemistry

Four years ago this month, a hitherto unknown comet in loose orbit around Jupiter passed so near the giant planet that it was torn apart into 20 fragments by tides. One orbit later, two years ago this month, the fragments of doomed comet P/Shoemaker Levy (SL9) fell into Jupiter. The enormous energies of these impacts (the largest fragments were nearly 1 km across and, hitting at 60 km/s, released some 2-4 x 10(exp 27) ergs) produced enormous explosions. Several of the ejecta plumes were imaged towering 3000 km above Jupiter's limb. The heat released when the plumes fell was considerable and easily observed on Earth. The impacts produced strong shocks, both promptly at the impact site and again, later, and over thousands of kilometers, when the ejecta plume reentered the atmosphere. The focus of this talk will be to discuss what the SL9 impacts taught us about impact shock chemistry - the processes, the ingredients, the results - and what inferences we may draw for impacts on early Earth. Shock chemistry generates a suite of molecules not usually seen on Jupiter. The most surprising report was of a huge amount of diatomic sulfur S2 at the site of the G impact. Other unusual products include CS, CS2, OCS, H2S, SO2, HCN, CO, and H2O; although H2S and H2O are doubtless abundant below the visible clouds. Hot or enhanced CH4 and NH3 were also detected. A general rule of shock chemistry is that CO forms until either C or O is exhausted. If O greater than C, the other products are oxidized, and excess O goes to H2O. If C greater than O, the other products are reduced, and excess C goes to HCN, C2H2, and a wide variety of more complicated organics. Ultimately, given time, the carbon would react all the way to graphite, but in practice the reactions are incomplete. The dark ejecta debris were probably composed in part of carbonaceous particles generated by the shocks. In a sense, the SL9 impacts performed the famous Miller-Urey experiment on a grand scale, with one result being the production of a lot of complex brown organic solids (called "tholins"). We use, a straightforward chemical kinetics model for the H, N, C, O, S system to follow the nonequilibrium chemistry behind the shocks. The model traces the evolving chemical composition of a parcel of gas by directly integrating the web of chemical reactions. Pressure and temperature histories of the parcels are patterned after those calculated by numerical hydrodynamic simulations of the ejecta plume. A given plume parcel is generally shocked twice; t.e a parcel shocked near the impact site is ejected at high velocity and is shocked again when it reenters the atmosphere. The final state of the gas depends mostly on the second shock, provided that the latter is hot enough. The chemical evidence is ambiguous, but most indications are that C greater than O in the shocked, reacting gas. Telltale signatures of abundant oxygen - SO2, SO, CO2, O2 - were not seen, while signatures of abundant carbon - CS, CS2, and HCN - were. On the other hand, abundant H2O would appear to require O greater than C, and two other observed sulfur species, S2 and OCS, appear to form more easily in a somewhat oxidized gas, presumable vaporized from the comet itself. Since on general principles one expects the -comet to have had a more-or-less cosmic composition, i.e. O greater than C, the production of CS, CS2, and HCN probably requires C greater than O in the shocked jovian air. This in turn implies that even the largest fragments released the bulk of their energy above the jovian water table, in all likelihood above 5 bars . There is no evidence in favor of the proposition that a significant amount of wet jovian air was shocked strongly enough to coax water to react; i.e. wet jovian air saw only temperatures significantly below 2000 K.

Zahnle, Kevin↗
NASA NTRS2018

ALMA Spectral Line and Imaging Survey of a Low and a High Mass-Loss Rate AGB Star Between 335 and 362 GHz

Context. Low and intermediate mass stars are known to power strong stellar winds when evolving through the asymptotic giant branch (AGB) phase. Initial mass, luminosity, temperature, and composition determine the pulsation characteristics of the star and the dust species formed in the pulsating photospheric layers. Radiation pressure on these grains triggers the onset of a stellar wind. However, as of today, we still cannot predict the wind mass-loss rates and wind velocities from first principles neither do we know which species are the first to condense in the upper atmospheric regions. Aims. We aim to characterise the dominant physical, dynamical, and chemical processes in the inner wind region of two archetypical oxygen-rich (C/O < 1) AGB stars, that is, the low mass-loss rate AGB star R Dor (M’ ∼ 1 × 10(exp −7) M/yr) and the high mass-loss rate AGB star IK Tau (M’ ∼ 5 × 10(exp −6) M/yr). The purpose of this study is to observe the key molecular species contributing to the formation of dust grains and to cross-link the observed line brightnesses of several species to the global and local properties of the star and its wind. Methods. A spectral line and imaging survey of IK Tau and R Dor was made with ALMA between 335 and 362 GHz (band 7) at a spatial resolution of ∼150 mas, which corresponds to the locus of the main dust formation region of both targets. Results. Some two hundred spectral features from 15 molecules (and their isotopologues) were observed, including rotational lines in both the ground and vibrationally excited states (up to v = 5 for SiO). Detected species include the gaseous precursors of dust grains such as SiO, AlO, AlOH, TiO, and TiO2. We present a spectral atlas for both stars and the parameters of all detected spectral features. A clear dichotomy for the sulphur chemistry is seen: while CS, SiS, SO, and SO2 are abundantly present in IK Tau, only SO and SO2 are detected in R Dor. Also other species such as NaCl, NS, AlO, and AlOH display a completely different behaviour. From some selected species, the minor isotopologues can be used to assess the isotopic ratios. The channel maps of many species prove that both large and small-scale inhomogeneities persist in the inner wind of both stars in the form of blobs, arcs, and/or a disk. The high sensitivity of ALMA allows us to spot the impact of these correlated density structures in the spectral line profiles. The spectral lines often display a half width at zero intensity much larger than expected from the terminal velocity, v∞, previously derived for both objects (36 km/s versus v(∞) ∼ 17.7 km/s for IK Tau and 23 km/s versus v(∞) ∼ 5.5 km/s for R Dor). Both a more complex 3D morphology and a more forceful wind acceleration of the (underlying) isotropic wind can explain this trend. The formation of fractal grains in the region beyond ∼400 mas can potentially account for the latter scenario. From the continuum map, we deduce a dust mass of ∼3.7 × 10(exp −7) Mand ∼2 × 10(exp −8) M for IK Tau and R Dor, respectively. Conclusions. The observations presented here provide important constraints on the properties of these two oxygen-dominated AGB stellar winds. In particular, the ALMA data prove that both the dynamical and chemical properties are vastly different for this high mass-loss rate (IK Tau) and low mass-loss rate (R Dor) star.

L. Decin↗
NASA NTRS2018

ALMA Spectral Line and Imaging Survey of a Low and a High Mass-Loss Rate AGB Star Between 335 and 362 GHz

Context. Low and intermediate mass stars are known to power strong stellar winds when evolving through the asymptotic giant branch (AGB) phase. Initial mass, luminosity, temperature, and composition determine the pulsation characteristics of the star and the dust species formed in the pulsating photospheric layers. Radiation pressure on these grains triggers the onset of a stellar wind. However, as of today, we still cannot predict the wind mass-loss rates and wind velocities from first principles neither do we know which species are the first to condense in the upper atmospheric regions. Aims. We aim to characterise the dominant physical, dynamical, and chemical processes in the inner wind region of two archetypical oxygen-rich (C/O<1) AGB stars, that is, the low mass-loss rate AGB star R Dor (M~ 1x10(exp 7) M☉/yr) and the high mass-loss rate AGB star IK Tau (M~5x10(exp 6) M☉/yr). The purpose of this study is to observe the key molecular species contributing to the formation of dust grains and to cross-link the observed line brightnesses of several species to the global and local properties of the star and its wind. Methods. A spectral line and imaging survey of IK Tau and R Dor was made with ALMA between 335 and 362 GHz (band 7) at a spatial resolution of ~150 mas, which corresponds to the locus of the main dust formation region of both targets. Results. Some two hundred spectral features from 15 molecules (and their isotopologues) were observed, including rotational lines in both the ground and vibrationally excited states (up to v=5 for SiO). Detected species include the gaseous precursors of dust grains such as SiO, AlO, AlOH, TiO, and TiO2.We present a spectral atlas for both stars and the parameters of all detected spectral features. A clear dichotomy for the sulphur chemistry is seen: while CS, SiS, SO, and SO2 are abundantly present in IK Tau, only SO and SO2 are detected in R Dor. Also other species such as NaCl, NS, AlO, and AlOH display a completely different behaviour. From some selected species, the minor isotopologues can be used to assess the isotopic ratios. The channel maps of many species prove that both large and small-scale inhomogeneities persist in the inner wind of both stars in the form of blobs, arcs, and/or a disk. The high sensitivity of ALMA allows us to spot the impact of these correlated density structures in the spectral line profiles. The spectral lines often display a half width at zero intensity much larger than expected from the terminal velocity, v1, previously derived for both objects (36 km/s versus v(∞)~17.7 km/s for IK Tau and 23 km/s versus v(∞)~5.5 km/s for R Dor). Both a more complex 3D morphology and a more forceful wind acceleration of the (underlying) isotropic wind can explain this trend. The formation of fractal grains in the region beyond _400 mas can potentially account for the latter scenario. From the continuum map, we deduce a dust mass of ~3.7 x 10(exp 7) M☉ and ~2 x 10(ex0 8) M☉ for IK Tau and R Dor, respectively. Conclusions. The observations presented here provide important constraints on the properties of these two oxygen-dominated AGB stellar winds. In particular, the ALMA data prove that both the dynamical and chemical properties are vastly different for this high mass-loss rate (IK Tau) and low mass-loss rate (R Dor) star.

Stars: AGB and post-AGB, Stars: mass loss, Stars: ↗
NASA NTRS1994

Physical and chemical structure of the IC 63 nebula. 1: Millimeter and far-infrared observations

We present results of a (sub)millimeter and far-infrared study of the reflection/emission nebula IC 63, located close to the BO.5p star gamma Cas. The source has been mapped in the (12)CO 2 - 1 and 3 - 2, (13)CO 2 - 1, and CS 2 - 1 lines and shows a small molecular cloud less than 1'x 2' in extent, which coincides with the brightest optical nebulosity and IRAS 100 micrometer emission. IC 63 is therefore an excellent example of a nearby (d approximately = 230 pc), edge-on photon-dominated region (PDR). Various other molecules have been observed at the peak position through their rotational transitions, in order to probe the physical parameters and to derive abundances. The measured CO, HCO(+) HCN, CS and H2CO line ratios suggest that the cloud is warm, T approximately = 50 K, and dense, n (H2) approximately = 5 x 10(exp 4)/cu cm. Excitation of molecules by electrons may play a significant role in this PDR. On the basis of these physical conditions, column densities have been determined from the observed line strengths. Several different methods are discussed to constrain the H2 column density, including the use of measured submillimeter continuum fluxes. The resulting abundances of species such as CN and CS are similar to those found in cold, dark clouds like TMC-1 and L134N. However, the abundances of other simple molecules such as HNC, HCO(+) and possibly C2H are lower by factors of at least three, probably because of the enhanced photodissociation rates at a distance of 1.3 pc from a B star. Surprisingly, only the abundance of the H2S molecule appears enhanced. More complex, volatile molecules such as CH3OH CH3CN and HNCO, and the sulfur-oxides SO and SO2 have not been found in this cloud. Limited observations of molecules in the reflection nebulea NGC 2023 are presented as well, and the resulting molecular abundances are compared with those found for IC 63.

Jansen, David J.↗