Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Correlated parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Sensitivity of posterior parameter correlations and response parameter correlations to prior response uncertainty

The two parameters one response model of the generalized linear least squares parameter adjustment methodology was used in order to analyze the procedure of improving cross sections agreement with integral experimental results. Two extreme adjustment cases were considered. One case is using extremely accurate measured integral responses, such as k{sub eff} of Godiva or Jezebel for instance. The other one is modifying only one parameter, for instance the modification of {nu}-bar in ENDF/B-VII, in order to improve agreement of calculated responses with corresponding integral measurements results. In both cases new posterior parameters correlations are generated. The conclusion is that it is not advised to use integral measurements information in the evaluation process of a general purpose nuclear data file. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Sensitivity of adjustment to parameter correlations and to response-parameter correlations

The adjusted parameters and response, and their respective posterior uncertainties and correlations, are presented explicitly as functions of all relevant prior correlations for the two parameters, one response case. The dependence of these adjusted entities on the various prior correlations is analyzed and portrayed graphically for various valid correlation combinations on a simple criticality problem. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Impact of Operating Parameters and Correlated Parameters for Extended BWR Burnup Credit

Applicants for certificates of compliance for spent nuclear fuel (SNF) transportation and dry storage systems perform analyses to demonstrate that these systems are adequately subcritical per the requirements of Title 10 of the Code of Federal Regulations (10 CFR) Parts 71 and 72. For pressurized water reactor (PWR) SNF, these analyses may credit the reduction in assembly reactivity caused by depletion of fissile nuclides and buildup of neutron-absorbing nuclides during power operation. This credit for reactivity reduction during depletion is commonly referred to as burnup credit (BUC). US Nuclear Regulatory Commission (NRC) staff review BUC analyses according to the guidance in the Division of Spent Fuel Storage and Transportation Interim Staff Guidance (ISG) 8, Revision 3, Burnup Credit in the Criticality Safety Analyses of PWR Spent Fuel in Transportation and Storage Casks.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

How important are Response-Parameter Correlations?

We use a simple one response/two parameters model in order to analyze the importance of response-parameter correlations on cross section adjustment. This question is relevant since the ENDF/B-VII.0 cross section library is based also on 'consideration of consistency with fast critical benchmark experiments', introducing such correlations.

99 GENERAL AND MISCELLANEOUS↗

Measurement of the polarization correlation parameter C{sub nn} in the pp elastic scattering with an unpolarized proton target and an unpolarized 1-GeV proton beam

The polarization correlation parameter C{sub nn} in the elastic proton-proton scattering was for the first time measured with a high statistical accuracy at 1 GeV using an unpolarized proton beam incident on an unpolarized proton target. Both outgoing protons from the reaction were detected in coincidence by means of a two-arm focusing magnetic spectrometer installed at nonsymmetric angles corresponding to the center-of-mass scattering angle {Theta}{sub cm} = 62.25{sup o}. The correlation parameter C{sub nn}, as well as polarizations P{sub 1} and P{sub 2} of the secondary protons, were measured by means of multiwire proportional chamber polarimeters placed at the focal planes of each spectrometer arm. The obtained data are compared with the predictions of the phase-shift analysis. The connection with the experiment on C{sub nn} and polarization measurements in the (p, 2p) reaction on {sup 4}He and other light nuclei in similar kinematics is discussed

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Physics of parameter correlations around the solar-scale enhancement in neutrino theory with unitarity violation

We discuss the physics of the three neutrino flavor transformation with non-unitary mixing matrix, with particular attention to the correlation between the $\nu$SM- and the $\alpha$ parameters which represent the effect of unitarity-violating (UV) new physics. Towards this goal, a new perturbative framework is created to illuminate the effect of non-unitarity in the region of the solar-scale enhanced oscillations. We refute the skepticism about the physical reality of the $\nu$Standard Model CP phase $\delta$–$\alpha$ parameter phase correlation by analysis with the SOL convention of $U_{{\tiny MNS}}$, in which $e^{\pm i \delta}$ is attached to $s_{12}$. Then, a comparative study between the solar- and atmospheric-scale oscillation regions allowed by the framework reveals a dynamical $\delta$–(blobs of the $\alpha$ parameters) correlation in the solar oscillation region, in sharp contrast to the “chiral”-type phase correlation $[e^{- i \delta} \bar{\alpha}_{\mu e},\ e^{- i \delta} \bar{\alpha}_{\tau e},\ \bar{\alpha}_{\tau \mu}]$ in the Particle Data Group convention seen in the atmospheric oscillation region. An explicit perturbative calculation to the first order in the $\nu_{\mu} \rightarrow \nu_{e}$ channel allows us to decompose the UV related part of the probability into the unitary evolution part and the genuine non-unitary part. We observe that the effect of non-unitarity tends to cancel between these two parts, as well as between the different $\alpha_{\beta \gamma}$ parameters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the neutrino-spin correlation parameter B neutron decay using ultracold neutrons

We present a new approach to measuring the neutrino-spin correlation parameter B in neutron decay. The approach combines the technology of large-area ion-implanted silicon detectors being developed for the abBA experiment, with an ultracold neutron source to provide more precise neutron polarimetry. The technique detects both proton and electron from the neutron decay in coincidence. B is determined from an electron-energy-dependent measurement of the proton spin asymmetry. This approach will provide a statistical precision of 1 x 10-4 . The systematic precision is still being evaluated, but is expected to be below 1 x 10-3 , and could approach 1 x 10-4 . A measurement of B with this precision would place constraints on supersymmetric extensions to the Standard Model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Random Sampling of Correlated Parameters – a Consistent Solution for Unfavourable Conditions

Two methods for random sampling according to a multivariate lognormal distribution – the correlated sampling method and the method of transformation of correlation coefficients – are briefly presented. The methods are mathematically exact and enable consistent sampling of correlated inherently positive parameters with given information on the first two distribution moments. Furthermore, a weighted sampling method to accelerate the convergence of parameters with extremely large relative uncertainties is described. However, the method is efficient only for a limited number of correlated parameters.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Magnetocrystalline anisotropy in cobalt based magnets: a choice of correlation parameters and the relativistic effects

The dependence of the magnetocrystalline anisotropy energy (MAE) in MCo 5 (M = Y, La, Ce, Gd) and CoPt on the Coulomb correlations and strength of spin orbit (SO) interaction within the GGA + U scheme is investigated. A range of parameters suitable for the satisfactory description of key magnetic properties is determined. We show that for a large variation of SO interaction the MAE in these materials can be well described by the traditional second order perturbation theory. We also show that in these materials the MAE can be both proportional and negatively proportional to the orbital moment anisotropy (OMA) of Co atoms. Dependence of relativistic effects on Coulomb correlations, applicability of the second order perturbation theory for the description of MAE, and effective screening of the SO interaction in these systems are discussed using a generalized virial theorem. Finally, such determined sets of parameters of Coulomb correlations can be used in much needed large scale atomistic simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Traveling waves and impact-parameter correlations

It is usually assumed that the high-energy evolution of partons in QCD remains local in coordinate space. In particular, fixed impact-parameter scattering is thought to be in the universality class of one-dimensional reaction-diffusion processes as if the evolutions at different points in the transverse plane became uncorrelated through rapidity evolution. We check this assumption by numerically comparing a toy model with QCD-like impact-parameter dependence to its exact counterpart with uniform evolution in impact-parameter space. We find quantitative differences, but which seem to amount to a mere rescaling of the strong coupling constant. Since the rescaling factor does not show any strong {alpha}{sub s} dependence, we conclude that locality is well verified, up to subleading terms at small {alpha}{sub s}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Uncertainty analysis of correlated parameters in automated reaction mechanism generation

Abstract Uncertainty analysis is a useful tool for inspecting and improving detailed kinetic mechanisms because it can identify the greatest sources of model output error. Owing to the very nonlinear relationship between kinetic and thermodynamic parameters and computed concentrations, model predictions can be extremely sensitive to uncertainties in some parameters while uncertainties in other parameters can be irrelevant. Error propagation becomes even more convoluted in automatically generated kinetic models, where input uncertainties are correlated through kinetic rate rules and thermodynamic group values. Local and global uncertainty analyses were implemented and used to analyze error propagation in Reaction Mechanism Generator (RMG), an open‐source software for generating kinetic models. A framework for automatically assigning parameter uncertainties to estimated thermodynamics and kinetics was created, enabling tracking of correlated uncertainties. Local first‐order uncertainty propagation was implemented using sensitivities computed natively within RMG. Global uncertainty analysis was implemented using adaptive Smolyak pseudospectral approximations as implemented in the MIT Uncertainty Quantification Library to efficiently compute and construct polynomial chaos expansions to approximate the dependence of outputs on a subset of uncertain inputs. Cantera was used as a backend for simulating the reactor system in the global analysis. Analyses were performed for a phenyldodecane pyrolysis model. Local and global methods demonstrated similar trends; however, many uncertainties were significantly overestimated by the local analysis. Both local and global analyses show that correlated uncertainties based on kinetic rate rules and thermochemical groups drastically reduce a model's degrees of freedom and have a large impact on the determination of the most influential input parameters. These results highlight the necessity of incorporating uncertainty analysis in the mechanism generation workflow.

Gao, Connie W.↗

Insights into Slip-Rate Time Functions, Rupture Parameter Correlations, and Ground Motions from Validated Multicycle Earthquake Ruptures

Earthquake strong-motion predictions using kinematic source modeling require knowledge of the slip-rate functions (SRFs) along the rupture and their distinct characteristics in asperities, background (off-asperity) areas and near the surface. Here, in this study we analyzed SRFs from well-validated, self-consistent, and fully dynamic rupture models from earthquake cycles obeying a rate-and-state friction law, from our companion study (Galvez et al., 2021). The shapes of SRFs in asperities are well described by the regularized Yoffe function (RYF), which has only two parameters: rise time T r and smoothing time T s , which control the generation of long- and short-period ground motions, respectively. In background areas, we demonstrate that, in addition to the primary rupture, multiple secondary ruptures may also nucleate from rupture heterogeneities related to asperities, resulting in SRFs with multiple peaks. Because it is impossible to fit a multiple-peak SRF by the single-peak RYF, we describe SRFs in background areas in an effective way by fitting their amplitude spectra with the RYF spectra. Such spectrally effective RYFs capture salient aspects of seismic-wave generation and can be used in rupture generators for strong motion prediction. We found that small T s values correlate with small characteristic weakening distances, large peak slip rates (PSRs), and large rupture velocities. T r values are larger in background areas and smaller in asperities. Within the shallow aseismic zone, T s values approximately quadruple whereas T r values approximately double. Because of this dominant T s increase, PSR values decrease in the near-surface zone. These features indicate that the generation of strong motions by the near-surface portions of the rupture is negligible in the studied scenarios.

Geosciences↗

The contribution of individual correlated parameters to the uncertainty of integral quantities.

Modern libraries of multigroup cross-sections often include covariances of the multigroup data. Data covariances are especially useful in calculating the variance of an important applied quantity z that can be calculated as a function of the data. Frequently, it is also of interest to know the magnitude of the contributions to this variance arising from various subsets of the data. This knowledge can be used, for example, in judging the benefits of performing specific new measurements, calculations, or evaluations on a given data subset. Here we describe a method for determining the contribution of an identified set of parameters to the variance of z that can be applied without difficulty even when the data have general correlations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Study of the correlation parameters of the surface structure of disordered semiconductors by the two-dimensional DFA and average mutual information methods

The processes of self-organization of the surface structure of hydrogenated amorphous silicon are studied by the methods of fluctuation analysis and average mutual information on the basis of atomic-force-microscopy images of the surface. It is found that all of the structures can be characterized by a correlation vector and represented as a superposition of harmonic components and noise. It is shown that, under variations in the technological parameters of the production of a-Si:H films, the correlation properties of their structure vary as well. As the substrate temperature is increased, the formation of structural irregularities becomes less efficient; in this case, the length of the correlation vector and the degree of structural ordering increase. It is shown that the procedure based on the method of fluctuation analysis in combination with the method of average mutual information provides a means for studying the self-organization processes in any structures on different length scales.

36 MATERIALS SCIENCE↗

Structural and Solubility Parameter Correlations of Gelation Abilities for Dihydroxylated Derivatives of Long‐Chain, Naturally Occurring Fatty Acids

Abstract Creating structure–property correlations at different distance scales is one of the important challenges to the rational design of molecular gelators. Here, a series of dihydroxylated derivatives of long‐chain fatty acids, derived from three naturally occurring molecules—oleic, erucic and ricinoleic acids—are investigated as gelators of a wide variety of liquids. Conclusions about what constitutes a more (or less!) efficient gelator are based upon analyses of a variety of thermal, structural, molecular modeling, and rheological results. Correlations between the manner of molecular packing in the neat solid or gel states of the gelators and Hansen solubility data from the liquids leads to the conclusion that diol stereochemistry, the number of carbon atoms separating the two hydroxyl groups, and the length of the alkanoic chains are the most important structural parameters controlling efficiency of gel formation for these gelators. Some of the diol gelators are as efficient or even more efficient than the well‐known, excellent gelator, ( R )‐12‐hydroxystearic acid; others are much worse. The ability to form extensive intermolecular H‐bonding networks along the alkyl chains appears to play a key role in promoting fiber growth and, thus, gelation. In toto, the results demonstrate how the efficiency of gelation can be modulated by very small structural changes and also suggest how other structural modifications may be exploited to create efficient gelators.

Zhang, Mohan↗