SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Report on the evaluation of significant EV deployments on distribution feeders, mostly examining their load behavior during voltage sags from the transmission system. A particular emphasis on if a charger is grid-friendly or grid-unfriendly (especially in respect to inducing FIDVR behavior) is examined.
The overarching goal of this project is to evaluate the CO 2 adsorption properties of a small family of metal-organic framework (MOFs) materials functionalized with amines at sub-ambient conditions. Our goal is to develop capabilities to measure CO 2 adsorption at conditions more relevant to the weather of the planet. For this purpose, Georgia Tech is constructing a “sub-ambient adsorption facility” in partnership with ZCP Sorbent Development, LLC, aimed specifically at rapidly and deeply characterizing the performance of DAC candidate materials in this important operational range (adsorption at -20 to 20 °C and RH of 0-100%). Here, we use the sub-ambient lab instrumentation designed or adapted to study the behavior of the pristine metal organic framework (MOF) MIL-101(Cr) and the MOF in the presence of amines ranging from small molecules (e.g. TREN, tris(2-aminoethylamine)) to oligomers (e.g. PEI, poly(ethyleneimine)). Any DAC sorbent must be amenable to deployment in practical contactors for gas-solid contacting (traditional pellet-based fixed beds are impossible at scale). To this end, we developed and tested these DAC materials in the forms of composite polymer/MOF fibers and custom 3D-printed monolith structures containing MOF DAC sorbents. The proposed studies advance these materials from technology readiness level (TRL) 2 to TRL 3.
The physical and transport properties of porous rocks can be altered by a variety of diagenetic, metamorphic, and tectonic processes, and the changes that result are of critical importance to such industrial applications as resource recovery, carbon dioxide sequestration, and waste isolation in geologic formations. The associated interrelationships between rocks, pore fluids and deformation are also key to understanding many natural processes, including dynamic metamorphism, fault mechanics, fault stability and pressure solution creep. In this project, we investigated the changes of permeability and pore geometry owing to inelastic deformation by solution-transfer, brittle fracturing and dislocation creep. In particular, we studied the coupling between pore fluids and deformation in fluid-filled quartz, calcite, mudstones and ultramafic rocks and examine the effects of coupled mechanical and chemical processes on the evolution of porosity and permeability under hydrothermal conditions. The investigations used a combination of techniques, that included triaxial laboratory experiments; uniaxial compressive loading with in situ observations of microstructure; permeability under hydrostatic compression; observations of microstructure using optical and electron microscopes, and micro-CT imaging; and numerical calculations. Laboratory experiments were designed to provide mechanical and transport data under conditions that isolate the particular mechanisms responsible for the changes. The data obtained were used to quantify changes in surface roughness, porosity, pore dimensions and their spatial fluctuations. The results of the experiments and data from image analyses were compared to the results of network, finite-difference and other numerical models to verify the validity of experimentally established relations between permeability and other rock properties. A bibliography for the period from 2015-2019 is appended below. New results obtained in the final year and the unfunded extension period are detailed below.
This report describes the results of PSCAD simulations that were performed in 2020 to assess the impacts of PacWave generation on CLPUD's 12.47-kV distribution and 69-kV subtransmission systems. PacWave South (PacWave) is a wave energy test facility planned by Oregon State University. PacWave shore facilities will be located south of Seal Rock on the Oregon coast. PacWave is expected to be operational in 2022 and will connect up to 10 MW of generation to CLPUD's Seal Rock distribution feeder.
The Sandia National Laboratories, in California (SNL/CA) is a research and development facility, owned by the U.S. Department of Energy’s National Nuclear Security Administration agency (DOE/NNSA). The laboratory is located in the City of Livermore (the City) and is comprised of approximately 410 acres. The SNL/CA facility is operated by National Technology and Engineering Solutions of Sandia, LLC (NTESS) under a contract with the DOE/NNSA. The DOE/ NNSA’s Sandia Field Office (SFO) oversees the operations of the site. North of the SNL/CA facility is the Lawrence Livermore National Laboratory (LLNL), in which SNL/CA’s sewer system combines with before discharging to the City’s Publicly Owned Treatment Works (POTW) for final treatment and processing. The City’s POTW authorizes the wastewater discharge from SNL/CA via the assigned Wastewater Discharge Permit #1251 (the Permit), which is issued to the DOE/NNSA’s main office for Sandia National Laboratories, located in New Mexico (SNL/NM). The Monitoring and Reporting Condition 2.B of the Permit requires compliance with the semiannual reporting requirements contained in federal categorical pretreatment standards regulations (40 CFR 403.12). These regulations set numerical limits on the concentration of pollutants allowed to discharge from certain categories of industrial processes. This report is submitted to the City to satisfy this reporting requirement.
This report covers the inspection findings for the Routine Inspection of the Omega Bridge conducted on September 23-25, 2022 and the Fracture Critical Member (FCM) Inspection conducted on June 26-27, 2021. Note that due to complications with the under-bridge access unit, portions of the Routine Inspection and the entire FCM Inspection could not be completed in 2022. As a result, the superstructure condition reported herein is based on the 2021 inspection whereas the deck and substructure conditions are based on the 2022 inspection. The superstructure condition will be updated when the inspection is completed in 2023. The inspections were completed according to the standards referenced in EXHIBIT “D” SCOPE OF WORK AND TECHNICAL SPECIFICATIONS including the National Bridge Inspection Standards (23 CFR Part 650, dated 12/14/2004) and other FHWA, NMDOT, and AASHTO codes and standards.
Picochlorum celeri has among the fastest photoautotrophic growth rates (~2 h doubling time in optimal conditions) reported to date for a marine alga. This study comprehensively analyzes the levels of Picochlorum celeri photosynthetic pigments, which can reach up to ~13% of the total particulate organic carbon (POC) under light-limiting conditions. The main Picochlorum celeri pigments identified include: chlorophyll a, chlorophyll b, lutein, β-carotene, canthaxanthin, violaxanthin, neoxanthin, zeaxanthin and antheraxanthin. The ketocarotenoid canthaxanthin can accumulate up to 120 mg L -1 in Picochlorum celeri liquid culture; ~12% of it was found in an extracellular polysaccharide matrix. Using a solar-simulating automated photobioreactor, we monitor the photoacclimation of cultures maintained in unshaded conditions (<0.5 μg mL -1 of total chlorophyll) through transitions from high irradiance (1000 μmoles photosynthetically active radiation (PAR) m -2 s -1 ) to low irradiance (60 μmoles PAR m -2 s -1 ), and conversely from low to high irradiance. Canthaxanthin and zeaxanthin accumulation are among the most rapid modulation responses when cultures are shifted from low to high irradiance. The violaxanthin, antherazanthin, and zeaxanthin (VAZ) pool is ~3-fold higher in high-light cultures, suggesting that the VAZ cycle combined with a dramatic reduction in chlorophyll levels are among the major mechanisms used in Picochlorum celeri to efficiently acclimate to high-irradiance levels. Responsive pigment modulation was also observed in denser cultures (~0.65 g L –1 ) grown under a diel cycle (pond-mimicking conditions). Furthermore, this research provides unique insights into the dynamics of pigment modulation and photoacclimation in response to changing irradiance in a biotechnologically promising alga and will inform future pigment engineering strategies to further improve light capture and biomass accumulation.
This study investigates marine and continental stratocumulus (Sc) cloud properties obtained from an automated implementation of a multispectral photometer retrieval. Photometer methods simultaneously retrieve cloud optical depth (τ) and cloud droplet effective radius (r e ), with estimates for liquid water path (LWP) calculated on the availability of those quantities. These applied methods evaluate retrieved cloud properties for Sc identified during a recent 6 year period over the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) program sites in Oklahoma, USA (SGP) and in the Azores, Portugal (ENA). Modest agreement in key quantity retrievals is found between the routine photometer products and multisensor collocated profiling references. Cumulative breakdowns contingent on cloud thickness indicate increases in all retrieved quantities in thicker clouds, with larger discrepancies in the relative performance between the retrievals collected in the presence of drizzle. Under continental cloud conditions, the clouds of a similar thickness and r e to those sampled under marine conditions report a factor of 1.5 larger τ and LWP. An r 2 ≅0.65 is found between photometer τ retrievals and shadowband radiometer measurements, with photometer retrievals reporting a high (relative) bias. The τ intercomparisons indicate that variability between retrievals is a factor of three larger than errors reported from individual retrieval input perturbation tests. Photometer r e retrievals suggest a low r 2 (< 0.1) having a standard deviation ≅ 3 µm when compared to ARM baseline multi-sensor radar/radiometer references (accounting for offsets in the cloud droplet number concentration assumptions of the latter). However, photometer LWP calculations remain relatively unbiased in non-drizzling conditions, with errors O (50 g m −2 ) and r 2 ≅0.5 to collocated radiometer and interferometer references. Additional sensitivity tests for island influences on marine Sc properties suggest that while island-influenced winds may promote larger cloud LWP or thickness, the influence could be within retrieval method uncertainty and/or collocated instrument variability.
With the goal of maximizing plant reliability and availability, complex systems such as nuclear power plants continuously monitor and record the performance and the health status of many components, assets, and systems. Such data may take the form of online monitoring data, condition reports, and maintenance reports and it carries the potential to provide system engineers with insights into anomalous behaviors or degradation trends as well as the possible causes behind them and to predict their direct consequences. The analysis of such data poses however few challenges. While some of these challenges are technical in nature (i.e., data are often distributed over several physical servers or databases), others are conceptual in nature (i.e., data elements come in different formats, numeric or textual), and measured values have different scales (e.g., vibration spectra and oil temperature). This paper directly tackles these challenges, and it focuses on the integration of all these data elements in order to assist plant system engineers in analyzing component, assets, and systems performances and optimize maintenance activities. This is performed by 1) extracting knowledge from textual data via technical language processing methods, and 2) quantifying system, asset, and component health from numeric condition-based data. We rely on model-based system engineering (MBSE) models of systems and assets to identify their architecture and functional (i.e., cause and effect) relations. Numeric and textual data elements are then associated with an MBSE graph element, based on their nature. This bonding of MBSE models and data elements constitutes a first-of-its-kind knowledge graph of a nuclear power plants system, with data elements being organized in a structured manner that enables system engineers to identify cause-effect trends in data elements and carry out appropriate actions in response.
Defects play a significant role in the material properties of carbon fibers (CF). Several defects result in the formation of sp 3 bonds in an otherwise sp 2 -dominant graphitic structure. Understanding the distribution of these defects within CF provides insight into their properties and the effect of manufacturing conditions. Reports showed time-of-flight secondary ion mass spectrometry (ToF-SIMS) is capable of characterizing the spatial distribution of sp 2 and sp 3 content in carbon materials. Here, ToF-SIMS was utilized to investigate the spatial distribution of sp 3 defects in T700, T1000, and M46 CF. M46 had the lowest sp 3 content. Center-to-edge analysis revealed that T700 CF had a gradient of sp 3 defects starting from the center and increasing to the edge, whereas M46 CF had a sudden increase in sp 3 defects roughly 1 μm from the edge. Comparatively, T1000 CF had a relatively uniform radial distribution of sp 3 defects, except for a newly identified sp 2 rich region at 0.8 μm from the center. This is hypothesized to originate from a skin–core structure that forms during CF manufacturing. As a result, this work demonstrates the utility of ToF-SIMS for characterizing the spatial distribution of sp 3 defects within CF, establishing new ways to understand CF formation.
Edge localized modes (ELMs) are triggered using deuterium pellets injected into plasmas with ITER-relevant low collisionality pedestals, and the resulting peak ELM energy fluence is reduced by approximately 25%–50% relative to natural ELMs destabilized at similar pedestal pressures. Cryogenically frozen deuterium pellets are injected from the low-field side of the DIII-D tokamak at frequencies lower than the natural ELM frequency, and heat flux is measured by infrared cameras. Ideal MHD pedestal stability calculations show that without pellet injection, these low collisionality pedestals were limited by their current density (peeling-limited) rather than their pressure gradient (ballooning-limited). ELM triggering success correlates strongly with pellet mass, consistent with the theory that a large pressure perturbation is required to trigger an ELM in low collisionality discharges that are far from the ballooning stability boundary. For sufficiently large pellets, both instantaneous and time-integrated ELM energy deposition measured by infrared cameras is reduced with respect to naturally occurring ELMs at the inner strike point, which is the position where it is largest for natural ELMs. Energy fluence at the outer strike point is less effected. Cameras observing both heat flux and D-alpha emission often find significant toroidally asymmetric striations in the outboard far scrape-off layer resulting from ELMs that are triggered by pellets. Toroidal asymmetries at the inner strike point are similar between natural and pellet-triggered ELMs, indicating that the reduction in peak heat flux and total fluence at that location is robust for the conditions reported here.
The commercial U.S. light-water reactor fleet has been operating at historical efficiency, reliability, and safety over the last decade. Nuclear power has the highest capacity factor of any other power generation technology while also serving as the largest baseload source for carbon-free energy. Despite this remarkable achievement, continued operations for many plants are threatened due to fierce electricity market competition and rising operations and maintenance costs of which continued maintenance of obsolete analog equipment is a contributor. The digital age and associated technologies are where the future lies in process control, and nuclear has yet to take full advantage of the capabilities offered therein. The Light Water Reactor Sustainability Program (LWRS) at Idaho National Laboratory (INL), sponsored by the Department of Energy, has a mission to help the light-water reactor fleet manage its foundational capabilities to continue providing safe and reliable carbon-free power. LWRS helps support that mission by providing scientific, technology-based solutions for advanced concepts of operations with a more viable business model that will allow the fleet to continue to operate at peak levels through extended plant operation. The LWRS Digitalization Project at INL seeks to leverage digital technologies to synthesize and transform work processes. We provide a state-of-the-art analysis of digitalized work processes in nuclear power and investigate ways in which researchers at INL and the nuclear industry can work together to identify what data to access, how to access it, what to do with the data, and most importantly, how to use the insights for decision-making across all levels within the business. Borne from these considerations, we present four guiding principles for digitalization: develop a coherent digitalization plan, apply human factors engineering, establish data governance, and anticipate unintended consequences. Together, these principles form a method that plants can use to effectively to digitalize nuclear industry work processes. Our guiding principles are informed by multiple knowledge sources. First, we document activities from the Work Digitalization Initiative, which was conceived as a means for nuclear organizations to help define and standardize the industry’s approach to digitalizing work. Second, we detail primary research conducted with industry professionals regarding drivers and barriers to digitalization adoption. We present survey results that demonstrate what the industry hopes to get out of digitalization and the ways that INL can continue to support the industry’s digital transformation. Third, we present a digitalization use case with industry partners NextAxiom Technology and Xcel Energy. The project objective was to transform the current condition report work process from paper to digital, incorporating digitalized principles. We report the development of the application and lessons learned. The accomplishments achieved by this research and development serve to identify critical needs for plant guidance in support of digitalization implementation and contribute to the knowledge and strategies available for utilities considering or undertaking digitalization.
Particle formation in pressurized oxy-fuel combustion can be fundamentally different from oxy-fuel combustion at atmospheric pressure. Under high pressures, the rate of char gasification with CO2 and H2O increases significantly and dominates the char reactions particularly at high temperatures. Also, the extent of fragmentation varies. This could result in a very different particle size distribution from that of air-fired combustion. To accurately obtain the particle size distribution in a pressurized oxy-fuel combustor without sampling bias, the particle measurement should be made at the system pressure. Very few published studies have accomplished this, and never under the conditions reported herein. In this work, we fire PRB coal in a 100 kWth staged pressurized oxy-fuel combustor (SPOC) under two pressures, 15 and 2 bara. A sampling probe (oil-cooled) is installed at the combustor outlet and the aerosol flow are sampled isokinetically. We utilize a state-of-the-art optical analyzer (Malvern Insitec) with a novel high-pressure and high-temperature flow cell to measure the particle size distribution and concentration in-situ in a sampled flow, which contains moist/corrosive flue gas under the process pressure and a controlled temperature that is kept above the dew point. The results show that the pressure can significantly influence the particle size distribution and concentration from the oxy-fuel combustor.
The formation of the main flue gas species (NOx, SOx, CO2, and CO) in pressurized oxy-fuel combustion can be fundamentally different from oxy-fuel combustion at atmospheric pressure. To accurately obtain the concentration of these gas species in a pressurized oxy-fuel combustor, a gas measurement which maintains the sampling pressure is needed. Very few published studies have accomplished this, and never under the conditions reported herein. In this work, we fire PRB coal in a 100 kWth staged pressurized oxy-fuel combustor (SPOC) under a pressure 15 bara. We utilize a state-of-the-art FTIR (Thermo Scientific Nicolet iS20) with a novel high-pressure gas cell that is under process pressure to measure the in-situ flue-gas concentration in a sampled flow. However, water vapor can significantly interfere with the FTIR measurement, particularly under pressure. To address this problem, we have developed a high-pressure nafion dryer to selectively remove the water vapor from the flue gas while retaining the flue gas species. This approach can significantly increase the signal-noise ratio for the FTIR. By integrating the nafion dryer and the high-pressure gas cell, we were able to successfully measure flue gas species at system pressure with the FTIR.
One challenge that nuclear power plant system engineers are facing is that the amount of equipment reliability (ER) data being continuously generated are extremely large. These data elements come in different forms: textual (e.g., condition reports) and numeric (e.g., generated by monitoring systems) and they provide system engineers with valuable insights and information regarding the discovery of anomalous behaviors or degradation trends, the identification of the possible causes behind such behaviors and trends, and the prediction of their direct consequences. This paper directly targets the generation of knowledge from ER data by putting “data into context”. Here, we employ model-based system engineering (MBSE) models of systems and assets to represent and capture their architecture and functional (i.e., cause-effect) relations. ER data elements are processed by identifying first which elements of the developed MBSE elements they are referring to. This task is much harder for textual data since the information contained in issue or maintenance reports needs to “be understood” by a computational tool. Here we called this process “knowledge extraction” where our methods to extract knowledge from textual data. Lastly, once numeric and textual ER data elements have been processed and “understood”, we discover possible cause-effect relations among them. This is performed by observing if a logical connection through the MBSE models exists, and if there is a temporal relation among them. The logic and temporal are the two main ingredients to perform “machine reasoning” from ER data.
There is a significant potential to reduce operating and maintenance cost at nuclear power plants using artificial intelligence (AI) and machine learning (ML). For instance, AI/ML has the potential to significant improve work management processes, condition reporting, and plant surveillance activities. However, the nuclear industry has been slow in adopting AI/ML due to several multifaceted barriers discussed in this paper. This work presents such multidisciplinary approach intended to 1) accelerate industry adoption of AI/ML-based applications at nuclear power plants and 2) ensure their safe, reliable, and effective use. This approach is discussed further in this work and will be used to address overarching challenges associated with AI deployment at scale to provide industry guidance that support accelerated adoption of AI/ML technologies throughout the industry.
In current nuclear power plants (NPPs) a large amount of condition-based data is being generated and stored to assess and monitor component health and performance. The format of this data can be either numeric (e.g., pump vibration data) or textual (e.g., condition report which assess component health). While assessing component health from numeric data can be performed with a large variety of methods, the extraction of information from textual data still remains a challenge. Natural language processing (NLP) methods are starting to be deployed in current NPPs mainly to filter out incident reports (IRs) that are not safety related by employing supervised machine learning methods. However, these methods do not really provide the quantitative information that might be contained in IRs. This paper presents an approach to extract information from textual data (e.g., from IRs, maintenance reports) that is based on NLP data analytics methods coupled with model-based system engineer (MBSE) models. NLP methods are employed to perform syntactic and semantic analyses. Syntactic analysis analyzes the grammatical structure of a sentence; such analysis includes: part of speech (POS) tagging (i.e., identification of grammatic elements of each string - e.g., nouns, verbs), named entity recognition (i.e., identification of text entities - e.g., names, dates, events), and relation extraction (e.g., coreference resolution). On the other hand, semantic analysis is designed to analyze the logic structure of a sentence. Through a specific set of rules, our methods can identify whether a sentence contains health information of a component (e.g., degraded performance, anomaly behavior) or the causal relationship between two events (i.e., a cause-effect pair). An innovative element of our approach is that semantic analysis relies on MBSE models to identify links between textual elements. MBSE are diagrams designed to represent system and component dependencies (from both a form and functional point of view). In our approach, MBSE models emulate system engineer knowledge about component/system architecture. This paper presents in detail how the integration of NLP methods and MBSE models is performed. Few analysis examples focusing on centrifugal pumps are presented.
One challenge that nuclear power plant system engineers are facing is continuous generation of an extremely large amount of equipment reliability (ER) data. These data elements come in textual (e.g., condition reports) and numeric (e.g., generated by monitoring systems) forms. They provide system engineers with valuable insights and information by discovering anomalous behaviors or degradation trends, identifying possible causes behind such behaviors and trends, and predicting their direct consequences. This paper directly targets the knowledge generation from ER data by putting “data into context.” We employ model-based system engineering (MBSE) of systems and assets to represent and capture their architecture and functional (i.e., cause-effect) relations. ER data elements are processed by first identifying which of the developed MBSE elements they are referring to. This task is harder for textual data since the information contained in issue or maintenance reports needs to be “understood” by a computational tool. We called this process “knowledge extraction” since our methods extract knowledge from textual data. Last, once numeric and textual ER data elements have been processed and “understood,” we discover possible cause-effect relations among them. This is performed by observing whether a logical connection through the MBSE models exists, and if there is a temporal relationship among them. The logic and temporal are the two main ingredients to perform “machine reasoning” from ER data.