Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Component Architecture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Developing a Component-Based Framework for Subsurface Simulation using the Common Component Architecture

This paper will provide a brief overview of two frameworks being developed for subsurface simulations. The first is based on the Smoothed Particle Hydrodynamics algorithm and is designed to model flow and transport at the pore scale, the second is based on the Subsurface Transport Over Multiple Phases subsurface continuum code (STOMP) and is designed to simulate flow at the Darcy scale. Both frameworks have been built using the Common Component Architecture toolkit. These frameworks will eventually be combined into a single framework for performing hybrid multiscale simulations that seamlessly integrate both the particle and continuum simulations together.

54 ENVIRONMENTAL SCIENCES↗

High-Performance Coal-Based Commercial Facade Panels and Architectural Components (Phase I Final Report)

Semplastics has developed, tested, and documented the viability for commercialization of a new class of composite architectural panel materials that use coal as the primary constituent. This project produced sample panels using these novel materials that comprise 55% coal by mass (71% carbon by mass) and are comparable in dimensions to commercially available materials, while displaying superior mechanical strength, significant weight savings, and better insulating ability at a competitive cost. Phase I moved this coal-based composite materials technology from a Technology Readiness Level (TRL) of 3 to TRL 5. Semplastics’ new coal-based composite materials display an array of high-performance characteristics, including light weight, mechanical durability, temperature stability, and water resistance. These new materials require less energy to produce than comparable commercial products and could be manufactured on existing conventional plastic resin processing equipment in commercial quantities. The coal particles are completely encapsulated in ceramic from a polymer-derived ceramic (PDC) precursor, then bonded together by another inorganic resin. The material can be molded and cured to produce fireproof components such as ceiling panels, facades, and extruded underlayment, blocking, and backer boards, as well as other architectural design components such as moldings. The project included the production of sample panels for proof of concept, testing of the panels to show their improved characteristics, and development of a scale-up strategy to demonstrate the viability of the coal-based panels as a commercial alternative to existing building materials.

36 MATERIALS SCIENCE↗

Designing a Component-Based Architecture for the Modeling and Simulation of Nuclear Fuels and Reactors

Concerns over the environment and energy security have recently prompted renewed interest in the U.S. in nuclear energy. Recognizing this, the U.S. Dept. of Energy has launched an initiative to revamp and modernize the role that modeling and simulation plays in the development and operation of nuclear facilities. This Nuclear Energy Advanced Modeling and Simulation (NEAMS) program represents a major investment in the development of new software, with one or more large multi-scale multi-physics capabilities in each of four technical areas associated with the nuclear fuel cycle, as well as additional supporting developments. In conjunction with this, we are designing a software architecture, computational environment, and component framework to integrate the NEAMS technical capabilities and make them more accessible to users. In this report of work very much in progress, we lay out the 'problem' we are addressing, describe the model-driven system design approach we are using, and compare them with several large-scale technical software initiatives from the past. We discuss how component technology may be uniquely positioned to address the software integration challenges of the NEAMS program, outline the capabilities planned for the NEAMS computational environment and framework, and describe some initial prototyping activities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Architecture and Component Selection for the Remote Canister-Monitoring System

This report documents the selected system architecture and components surveyed for the development of a remote, canister-monitoring system (RCMS) for determining and monitoring environmental conditions within dry fuel storage canisters containing aluminum-clad spent nuclear fuel (ASNF) at Idaho National Laboratory (INL). These efforts are in support of the Department of Energy Office of Environmental Management (DOE-EM) investigations into the technical issues associated with extended dry storage (50+ years) of ASNF. It is important to resolve questions regarding storage because the ATR is expected to continue producing approximately 100 elements of spent fuel per year for at least another twenty years. The parameters to be monitored by the RCMS include temperature, relative humidity, hydrogen gas concentration, and radiation environment (dose). Components are selected based on the expected environmental conditions within the canister and fuel storage area and the desired performance of the RCMS. Several of these components have been purchased and are currently undergoing component testing to confirm their suitability for use in delivering the RCMS. Additional components may be identified through the course of design and may be selected in the future. Furthermore, changing performance, interfacing, and compatibility requirements and the results of component testing may necessitate revisiting component selection.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Extending the Concept of Component Interfaces: Experience with the Integrated Plasma Simulator

In the component approach, components are said to interact through well-defined interfaces. Conventionally, these interfaces are based on method signatures which define the syntax, if not the semantics of the interface. However in many cases, this does not encompass all of the interactions a component has with its peers. In the Integrated Plasma Simulator (IPS), a framework for coupled simulation of fusion plasmas developed by the Center for Simulation of RF Wave Interactions with Magnetohydrodynamics (SWIM), we find that components interact through files and through an event service in addition to the usual method calls. In this report, we discuss the motivations for the design of the IPS and our experience with it. We further consider whether the concept of a component interface needs to be extended, and how it might be done. Component-based software engineering (CBSE) has allowed applications to grow in size, scale and power, by coupling components along well-defined interfaces. Many groups have come together to provide rules and standards for component and interface definitions. General purpose component architectures have been designed for business, and scientific computing, while domain specific component frameworks have been created in many domains, including climate modeling, rocket simulation, and engineering. In each architecture, component interfaces, typically implemented as method invocations, are the only ways that are mentioned for components to interact with each other and the outside world. However, components may not always communicate over their interfaces. They can interact with software entities in many other ways including sharing files and publish/subscribe systems. In this paper we consider two ways in which components interact without method invocation in a component framework, how the component interface can be extended to describe these interactions, and the implications on the greater component community. The rest of the paper continues as follows: first we briefly describe the fusion simulation framework that serves as the basis for the discussion (Sec. 2), followed by a description of non-interface interactions (Sec. 3), a discussion of how to extend to the component interface (Sec. 4) and finally some conclusions (Sec. 5).

33 ADVANCED PROPULSION SYSTEMS↗

SciDAC-Center for Plasma Edge Simulation Report

The Common Component Architecture (CCA) effort is the embodiment of a long-range program of research and development into the formulation, roles, and use of component technologies in high-performance scientific computing. CCA components can interoperate with other components in a variety of frameworks, including SCIRun2 from the University of Utah. The SCIRun2 framework is also developing the ability to connect components from a variety of different models through a mechanism called meta-components. The meta component model operates by providing a plugin architecture for component models. Abstract components are manipulated and managed by the SCIRun2 framework, while concrete component models perform the actual work and communicate with each other directly. We will leverage the SCIRun2 framework and the Kepler system to orchestrate components in the Fusion Simulation Project (FSP) and to provide a CCA-based interface with Kepler. The groundwork for this functionality is being performed with the Scientific Data Management center. The SDM center is developing CCA-compliant interfaces for expressing and executing workflows and create workflow components based on SCIRun and Ptolemy (Kepler) execution engines, including development of uniform interfaces for selecting, starting, and monitoring scientific workflows. Accomplishments include Introduction to CCA and Simulation Software Systems, Introduction into SCIRun2 and Bridging within SCIRun2, CCALoop: A scalable design for a distributed component framework, and Combining Workflow methodologies with Component Architectures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optics Supply Planning System

The purpose of this study is to specify the design for an initial optics supply planning system for NIF, and to present quality assurance and test plans for the construction of the system as specified. The National Ignition Facility (NIF) is a large laser facility that is just starting operations. Thousands of specialized optics are required to operate the laser, and must be exchanged over time based on the laser shot plan and predictions of damage. Careful planning and tracking of optic exchanges is necessary because of the tight inventory of spare optics, and the long lead times for optics procurements and production changes. Automated inventory forecasting and production planning tools are required to replace existing manual processes. The optics groups members who are expected to use the supply planning system are the stakeholders for this project, and are divided into three groups. Each of these groups participated in a requirements specification that was used to develop this design. (1) Optics Management--These are the top level stakeholdersk, and the final decision makers. This group is the interface to shot operations, is ultimately responsible for optics supply, and decides which exchanges will be made. (2) Work Center Managers--This group manages the on site optics processing work centers. They schedule the daily work center operations, and are responsible for developing long term processing, equipment, and staffing plans. (3) Component Engineers--This group manages the vendor contracts for the manufacture of new optics and the off site rework of existing optics. They are responsible for sourcing vendors, negotiating contracts, and managing vendor processes. The scope of this analysis is to describe the structure and design details of a system that will meet all requirements that were described by stakeholders and documented in the analysis model for this project. The design specifies the architecture, components, interfaces, and data stores of the system at a level of detail that can be used for construction and deployment. Test and quality assurance plans are also included to insure that the system delivers all requirements when it is built. The design is for an automated forecasting prototype that allocates inventory and processing resources in response to potentially daily changes in the forecasted optics exchanges required to operate NIF. It will automatically calculate future inventory levels and processing rates based on current inventory and projected exchanges, procurements, and capacities. It will include screens that allow users to readily assess the feasibility of the forecast, identify failures to meet the demand, revise input data, and re-run the automated forecast calculation. In addition, the system will automatically retrieve the current exchange demand from an external database. Approved forecasts from the system will automatically update work order plans and procurement plans in the existing inventory and production control database. The timing of optics exchanges affects the forecast of damage and future exchanges, so an approved exchange plan will be fed back to the demand database and be used to calculate the next demand projection. The system will read the demand data and update the forecast and output files daily. This specification has been divided into two parts. This document, Part 1 lays out the major design decisions and specifies the architectural, component, and data structure designs. Part 2 will add interface designs, quality assurance and testing plans, and deployment details.

42 ENGINEERING↗

Design and Implementation of a High-Performance CCA Event Service

Event services based on publish-subscribe architectures are well established components of distributed computing applications. Recently, an event service has been proposed as part of the Common Component Architecture (CCA) for high-performance computing applications. In this paper we describe our implementation, experimental evaluation, and initial experience with a high performance CCA event service that exploits efficient communications mechanisms commonly used on high-performance computing (HPC) platforms. We describe the CCA event service model, and discuss briefly the possible implementation strategies of that model. We then present the design and implementation of the event service using the Aggregate Remote Memory Copy Interface (ARMCI) as an underlying communication layer for this mechanism. Two alternative implementations are presented and evaluated on a Cray XD-1 platform. The performance results demonstrate that event delivery latencies are low and that the event service is able to achieve high throughput levels. Finally, we describe the use of the event service in an application for high-speed processing of data from a mass spectrometer, and conclude by discussing some possible extensions to the event service for other HPC applications.

97 MATHEMATICS AND COMPUTING↗

Multiple Component Multiple Data Programming in Subsurface Simulations: The CCA Approach

The dynamic nature and the encapsulation provided by the component approach maps quite naturally to the concepts of multiple-program multiple-data (MPMD) programming. In this paper, we will introduce a new programming model called multiple component multiple data (MCMD). The MCMD model provides a high-level infrastructure in the common component architecture (CCA) environment to exploit hardware parallelism in emerging petascale and exascale systems. We demonstrate the effectiveness of CCA MCMD programming in context of subsurface simulations to express and manage many-task parallelism. Our target application is STOMP, a large scale (~800K lines of code) subsurface simulation code. The performance results for a 3D saturated flow problem with the STOMP CCA framework show that the MCMD programming model is very effective to achieve scalability on thousands of processors with high efficiency. For example, to simulate the saturated flow problem containing ~1.2 million nodes on 2048 processors, the CCA MCMD version of STOMP is an order of magnitude faster than the original parallel version of STOMP.

99 GENERAL AND MISCELLANEOUS↗

Decision Point 3 of Statement of Project Objectives (SOPO) “Recovery Act: Development of ITM Oxygen Technology for Integration with Advanced Industrial Systems”

Air Products is carrying out a scope of work under Phase 5 of the ITM Oxygen Cooperative Agreement to design, build, and operate a ceramic membrane fabrication facility (the -CerFabII) to enable production of membrane modules to supply a conceptual 2000 ton per day (TPD) ITM Oxygen facility (the -ITM Oxygen Development FacilityII), and to perform supporting development tasks in materials development and engineering development toward industrial, carbon capture and sequestration applications. Air Products is executing this project under the American Recovery and Reinvestment Act (ARRA) with the objective to accelerate the adoption of ITM Oxygen technology to help meet the country’s goals for deploying clean power plants. The objective of this Topical Report is to address the requirements of Decision Point 3 (DP3), which pertains to the status of all Tasks within Phase 5 and most notably the project status of the CerFab (Task 30) prior to authorization of funds for equipment purchase and construction of the facility. The intent of the DP3 is to provide the opportunity for DOE-NETL to review the status of these tasks and to make recommendations on forward project direction, including a recommendation to pass into Budget Period 8. In the area of Materials Development, Air Products has specified a high pressure dilatometer system which will enable measurements of material expansion of ITM ceramic compounds at very high oxygen partial pressures consistent with CCS applications. Under Task 28.2, subcontractor Ceramatec has made significant progress since DP2 in materials selection and process development and improvement for advanced architecture module fabrication. Ceramatec has determined a materials specification, and has selected a process for making the material. Ceramatec has further developed and selected the process for applying the membrane to unsintered advanced architecture wafers with a Two Step process. Ceramatec has built submodules meeting leak rate specifications and intact 1-TPD modules compromised of advanced architecture components. Equipment and processes required for implementation of the advanced architecture design in the CerFab have been identified and are included in the Task 30 scope of equipment supply. Under Task 29.0, Air Products has developed conceptual ideas for implementation of ITM Oxygen in a 2000 TPD test unit. These concepts are proposed for scale up of the ITM technology to large scale with reduced commercial risk. Under Task 30, Air Products and Ceramatec have collaborated to re-design the CerFab process with the advanced architecture wafer production process as primary, and laid out the new process in the Tooele building; the required process equipment have been specified. The project team updated the project cost and schedule estimates, including all environmental permit schedules. The team also re-assessed project risk and costs for the commissioning and operating phases of the program. Newly projected costs for the CerFab, for which details are provided here as attachments, indicate a savings of approximately $100,000 relative to the original estimate at the time of Phase 5 contract definitization. However, an assessment of risks associated with the equipment, process, and operations of the CerFab indicate that approximately $2.9 million of costs should be expected to address various issues in the project. In addition, $1.6 million of additional spending is expected relative to the original estimate to operate the facility during Task 30.2. Air Products proposes a plan to re-direct funds from Tasks 28, 29, and 31 to Task 30 as necessary to allow the CerFab to meet the Phase 5 program objectives.

Armstrong, Phillip↗

Report of the IMFIT Advisory Committee from the Meeting of 9/16/08 at General Atomics

The Committee commends and thanks the presenters and GA for providing clear and informative presentations. We present our responses to 5 questions raised in the Charge, as well as additional comments that may be useful for the project. (Question 1) The IMFIT framework is based on PYTHON and CCA; can IMFIT meet its long-term goals with this choice of language for framework? Our first recommendation is to change the terminology; it appears that the project is not really utilizing CCA (Common Component Architecture). The project is really about using Python to organize workflow among components that are spawned as processes via pipes from Python. We suggest that in describing the project, the team drop the designation 'CCA' and simply state that the IMFIT framework is based on using Python to control workflow among components. Concerning the specific question: we understand the principal goal of the project to be the development of an easy-to-use tool that efficiently integrates different physics modules to support experimental data analysis and modeling. Yes, Python and the workflow-based framework are appropriate choices for meeting this objective. The Committee, in examining the goal, discussed whether the IMFIT project was duplicative of other projects; there are several others in the U.S. and elsewhere with integrated modeling goals. In particular in the U.S., SWIM, PTRANSP, and the proto-FSP's. However this project occupies a reasonably unique niche through its emphases on integrating experimental data, use of existing components, its near-term focus, and the extent to which is targeted at experimentalist users. (Question 2) Will IMFIT benefit from the additional use of an interoperability language for framework such as BABEL? No, IMFIT is not really doing inter-language communication. In particular this will be the case as long as inter-component communication is via files--and that's OK so long as you aren't doing lots of short steps with communication at each step. (Question 3) IMFIT GUI is based on the public PyGTK toolkit; will IMFIT benefit from the additional use of other public Python graphic toolkits such as wxPython that is a cross-platform wrapper, or PyQt, or a commercial package such as IDL? PyGTK seems adequate for now. The team needs to decide if it needs more capability. Avoid licensed software that interferes with portability and the open-source goal (and thus in particular avoid IDL). (Question 4) Will IMFIT benefit from using a XML-RPC as alternative to sending files thru sockets? IMFIT could benefit by adopting some kind of self-describing format, such as XML or HDF5, but data can still be sent over sockets. This is part of a broader question: 'Should IMFIT adopt some kind of standard for communicating data between components?' To do anything other than what is done now requires modification of individual components (or convertors/wrappers). But moving to a self-describing standard is a good idea, which should be considered. You don't need to impose a standard, but you could decide on one and move toward it gradually, as the architecture doesn't impose a standard. But whether you adopt a standard and the pace of moving toward it is up to you. (Question 5) Will IMFIT benefit from any other available computational tool? (a) IMFIT would benefit from fuller use of an already incorporated tool--python language in the task execution specification, to enable desired features like branching; (b) If there is a high degree of data hierarchy, IMFIT should explore HDF5 as well as NETCDF and compare; (c) IMFIT would benefit from moving toward common data standards; (d) It would be useful for the IMFIT team to monitor developments in related projects such as the proto-FSP's and PTRANSP to ascertain if there are potentially useful tools.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrogen Generation From Electrolysis

Small-scale (100-500 kg H2/day) electrolysis is an important step in increasing the use of hydrogen as fuel. Until there is a large population of hydrogen fueled vehicles, the smaller production systems will be the most cost-effective. Performing conceptual designs and analyses in this size range enables identification of issues and/or opportunities for improvement in approach on the path to 1500 kg H2/day and larger systems. The objectives of this program are to establish the possible pathways to cost effective larger Proton Exchange Membrane (PEM) water electrolysis systems and to identify areas where future research and development efforts have the opportunity for the greatest impact in terms of capital cost reduction and efficiency improvements. System design and analysis was conducted to determine the overall electrolysis system component architecture and develop a life cycle cost estimate. A design trade study identified subsystem components and configurations based on the trade-offs between system efficiency, cost and lifetime. Laboratory testing of components was conducted to optimize performance and decrease cost, and this data was used as input to modeling of system performance and cost. PEM electrolysis has historically been burdened by high capital costs and lower efficiency than required for large-scale hydrogen production. This was known going into the program and solutions to these issues were the focus of the work. The program provided insights to significant cost reduction and efficiency improvement opportunities for PEM electrolysis. The work performed revealed many improvement ideas that when utilized together can make significant progress towards the technical and cost targets of the DOE program. The cell stack capital cost requires reduction to approximately 25% of today’s technology. The pathway to achieve this is through part count reduction, use of thinner membranes, and catalyst loading reduction. Large-scale power supplies are available today that perform in a range of efficiencies, >95%, that are suitable for the overall operational goals. The balance of plant scales well both operationally and in terms of cost becoming a smaller portion of the overall cost equation as the systems get larger. Capital cost reduction of the cell stack power supplies is achievable by modifying the system configuration to have the cell stacks in electrical series driving up the DC bus voltage, thereby allowing the use of large-scale DC power supply technologies. The single power supply approach reduces cost. Elements of the cell stack cost reduction and efficiency improvement work performed in the early stage of the program is being continued in subsequent DOE sponsored programs and through internal investment by Proton. The results of the trade study of the 100 kg H2/day system have established a conceptual platform for design and development of a next generation electrolyzer for Proton. The advancements started by this program have the possibility of being realized in systems for the developing fueling markets in 2010 period.

08 HYDROGEN↗

A Component-Based Framework for Smoothed Particle Hydrodynamics Simulations of Reactive Fluid Flow in Porous Media.

The development of a framework to support smoothed particle hydrodynamics (SPH) simulations of fluid flow and transport in porous media is described. The framework is built using the Common Component Architecture (CCA) toolkit and supports SPH simulations using a variety of different SPH models and setup formats. The SPH simulation code is decomposed into independent components that represent self-contained units of functionality. Different physics models can be developed within the framework by re-implementing key components but no modification of other components is required. The model for defining components and developing abstract interfaces for them that support a high degree of modularity and minimal dependencies between components is discussed in detail.

99 GENERAL AND MISCELLANEOUS↗

The Integrated Plasma Simulator: A Flexible Python Framework for Coupled Multiphysics Simulation

High-fidelity coupled multiphysics simulations are an increasingly important aspect of computational science. In many domains, however, there has been very limited experience with simulations of this sort, therefore research in coupled multiphysics often requires computational frameworks with significant flexibility to respond to the changing directions of the physics and mathematics. This paper presents the Integrated Plasma Simulator (IPS), a framework designed for loosely coupled simulations of fusion plasmas. The IPS provides users with a simple component architecture into which a wide range of existing plasma physics codes can be inserted as components. Simulations can take advantage of multiple levels of parallelism supported in the IPS, and can be controlled by a high-level ``driver'' component, or by other coordination mechanisms, such as an asynchronous event service. We describe the requirements and design of the framework, and how they were implemented in the Python language. We also illustrate the flexibility of the framework by providing examples of different types of simulations that utilize various features of the IPS.

99 GENERAL AND MISCELLANEOUS↗

Raexplore: Enabling Rapid, Automated Architecture Exploration for Full Applications

We present Raexplore, a performance modeling framework for architecture exploration. Raexplore enables rapid, automated, and systematic search of architecture design space by combining hardware counter-based performance characterization and analytical performance modeling. We demonstrate Raexplore for two recent manycore processors IBM Blue- Gene/Q compute chip and Intel Xeon Phi, targeting a set of scientific applications. Our framework is able to capture complex interactions between architectural components including instruction pipeline, cache, and memory, and to achieve a 3–22% error for same-architecture and cross-architecture performance predictions. Furthermore, we apply our framework to assess the two processors, and discover and evaluate a list of architectural scaling options for future processor designs.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

LOW-COST LED LUMINAIRE FOR GENERAL ILLUMINATION

During this two-year Solid-State Lighting (SSL) Manufacturing R&D project Cree developed novel light emitting diode (LED) technologies contributing to a cost-optimized, efficient LED troffer luminaire platform emitting at ~3500K correlated color temperature (CCT) at a color rendering index (CRI) of >90. To successfully achieve program goals, Cree used a comprehensive approach to address cost reduction of the various optical, thermal and electrical subsystems in the luminaire without impacting performance. These developments built on Cree’s high- brightness, low-cost LED platforms to design a novel LED component architecture that will enable low-cost troffer luminaire designs with high total system efficacy. The project scope included cost reductions to nearly all major troffer subsystems as well as assembly costs. For example, no thermal management components were included in the troffer, owing to the optimized distribution of compact low- to mid-power LEDs. It is estimated that a significant manufacturing cost savings will result relative to Cree’s conventional troffers at the start of the project. A chief project accomplishment was the successful development of a new compact, high-efficacy LED component geometry with a broad far-field intensity distribution and even color point vs. emission angle. After further optimization and testing for production, the Cree XQ series of LEDs resulted. XQ LEDs are currently utilized in Cree’s AR series troffers, and they are being considered for use in other platforms. The XQ lens geometry influenced the independent development of Cree’s XB-E and XB-G high-voltage LEDs, which also have a broad intensity distribution at high efficacy, and are finding wide implementation in Cree’s omnidirectional A-lamps.

Lowes, Ted↗