Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Circular Economy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Closing the Loop on Space Trash / Is a Circular Economy Possible?

A crew member will nominally consume 2.5 kg of water per crew-member per day, rejectapproximately 0.032 kg of dry fecal solid waste per crew member per day (dry basis)and generate approximately 2,122 kg of logistical waste per year on a long-durationcrewed mission. This topic seeks to push the conversation towards completing a closedloop system and circular economy for all materials and recoverable resources withregard to waste management, regenerative water use, and recycling. In all aspects,reduction of crew maintenance time, mass, power and volume are at the forefront oftechnology development. In addition, the longevity and hardware robustness is important(lasting >3 years). Overall water recovery of >98% is desired, as well as, condensingheat exchangers that remove water from air with collection rates up to 1.45 kg of waterper hour. There are many technologies on the ground being developed for recycling andtrash management or regenerative water use that have yet to introduce themselves forspace development and infusion. Here we look to open the conversation and cross cutthese platforms to bring out some innovation and exposure into the hidden crevasses ofthe waste that humans create and how to minimize it/repurpose it, for all of humanity.

ISRU↗
NASA NTRS2021

What to Take? When to Make? How to Break Even? Avoid Mistakes in Microbial Biomanufacturing in Support of Human Near-to-Deep-Space Exploration

In this whitepaper, we call for the concept of biomanufacturing to be expanded and widely adopted as a support function of human Space-travel. To demonstrate the impact and value of this strategy, we identify the specific offworld scenarios where the concept is most applicable, as well as the vital inventories that can be made available thereby. This will serve to increase capabilities of human operations beyond Earth-orbit and allow for extended mission design through greater autonomy while minimizing risks through redundancy. To this end, we sketch the potential routes and systems to arrive at these goals, in the form of specialized microbial cell factories that can most meaningfully leverage the resources available along the journey. The strategic vision presented here relies heavily on Synthetic Biology as it integrates with major plans for In Situ Resource Utilization and highlights applications that engineered biology is uniquely suited to address. We finish by advocating for the research and development investments that need to be made in order to significantly increase readiness of these technologies over the coming decade. This dovetails with current efforts to return humans to the Moon with Mars on the horizon. Besides ensuring the feasibility and sustainability of crewed Space exploration and habitation, the advancement of these technologies may spawn a new scalable microgravity-based biotechnology industry that contributes to the creation of a circular economy on Earth.

Biomanufacturing↗
NASA NTRSDate not supplied

Synthetic biology off planet for game-changing solutions for a greener Earth

Synthetic biology – creating new capabilities with life – promises to create a greener future for planet Earth, from fields as diverse as pharmaceuticals to manufacturing, agriculture and nanotechnology. Progress can be stymied by such considerations as economics, politics, legal and philosophical issues surrounding GMOs. Often solutions to these problems already exist, so it is difficult for a new, superior method to displace the old. As we move humans beyond Earth, to long duration stays in the International Space Station, and then onward to the Moon and Mars, the challenges of supporting human life will need radical new solutions. For example, while life on Earth uses an enzymatic machinery which evolved close to 3 billion years ago, synthetic biology promises to be able to engineer the systems to adapt to current natural or industrial environments. A focus on solutions off planet require a focus on a circular economy. While there are new constraints, such as worrying about the mass of a solution, constraints offer opportunities for game-changing solutions that will then allow revolutions back on our home planet.

Lynn J Rothschild↗
NASA NTRSDate not supplied

Geologic Maps for Civil Engineering and Infrastructure Planning

The Artemis Program mandate for sustainable, long-term presence on the Moon requires learning to "Live Off the Land". Geologic maps enable a paradigm shift to model the development and scaling of infrastructure for robotic and human exploration inside a bounded system on the lunar surface. Relying on geologic maps produced from orbital data and robotic precursor missions, in-situ resource utilization (ISRU) will be required to produce infrastructure, building materials and consumables. The ISRU value chain must be mapped to identify linkages of resources, producers, processes and equipment capabilities for transforming excavated regolith into usable feedstocks. Coordination will be required to balance supply and demand across the whole system of lunar infrastructure and operations, at each stage of development.

Geologic Mapping↗
NASA NTRS1972

Evaluation of solution procedures for material and/or geometrically nonlinear structural analysis by the direct stiffness method.

This paper presents an assessment of the solution procedures available for the analysis of inelastic and/or large deflection structural behavior. A literature survey is given which summarized the contribution of other researchers in the analysis of structural problems exhibiting material nonlinearities and combined geometric-material nonlinearities. Attention is focused at evaluating the available computation and solution techniques. Each of the solution techniques is developed from a common equation of equilibrium in terms of pseudo forces. The solution procedures are applied to circular plates and shells of revolution in an attempt to compare and evaluate each with respect to computational accuracy, economy, and efficiency. Based on the numerical studies, observations and comments are made with regard to the accuracy and economy of each solution technique.

Stricklin, J. A.↗
NASA NTRS2003

Applicability of Markets to Global Scheduling in Grids: Critical Examination of General Equilibrium Theory and Market Folklore

Markets are often considered superior to other global scheduling mechanisms for distributed computing systems. This claim is supported by: a casual observation from our every-day life that markets successfully equilibrate supply and demand, and the features of markets which originate in the general equilibrium theory, e.g., efficiency and the lack of necessity of 2 central controller. This paper describes why such beliefs in markets are not warranted. It does so by examining the general equilibrium theory, in terms of scope, abstraction, and interpretation. Not only does the general equilibrium theory fail to provide a satisfactory explanation of actual economies, including a computing-resource economy, it also falls short of supplying theoretical foundations for commonly held views of market desirability. This paper also points out that the argument for the desirability of markets involves circular reasoning and that the desirability can be established only vis-a-vis a scheduling goal. Finally, recasting the conclusion of Arrow's Impossibility Theorem as that for global scheduling, we conclude that there exists no market-based scheduler that is rational (in the sense defined in microeconomic theory), takes into account utility of more than one user, and yet yields a Pareto-optimal outcome for arbitrary user utility functions.

Nakai, Junko↗
NASA NTRS1977

Polarization loss of a satellite - Data collection sensor link

It is noted that the stringent economy of data-collection systems consisting of several widely dispersed satellite-monitored sensor platforms can be partially achieved by using an inexpensive linearly polarized antenna on each platform and that due to Faraday rotation of the ionosphere, the satellite antenna must be circularly polarized to avoid a prohibitive polarization loss. The cumulative probability distribution of polarization loss between a linearly polarized platform antenna and an elliptically polarized satellite antenna is computed for satellite-antenna axial ratios of 3 and 4 dB. The results indicate that a polarization loss of 4.5 dB must be expected for a reliability of 85% and an axial ratio of 3 dB. It is suggested that the conventional assignment of a 3-dB polarization loss to the communication link considered may not insure the required link reliability.

Estep, H.↗
NASA NTRS1979

Development of a realistic stress analysis for fatigue analysis of notched composite laminates

A finite element stress analysis which consists of a membrane and interlaminar shear spring analysis was developed. This approach was utilized in order to model physically realistic failure mechanisms while maintaining a high degree of computational economy. The accuracy of the stress analysis predictions is verified through comparisons with other solutions to the composite laminate edge effect problem. The stress analysis model was incorporated into an existing fatigue analysis methodology and the entire procedure computerized. A fatigue analysis is performed upon a square laminated composite plate with a circular central hole. A complete description and users guide for the computer code FLAC (Fatigue of Laminated Composites) is included as an appendix.

Humphreys, E. A.↗
NASA NTRS1974

Integrated P-channel MOS gyrator

A gyrator circuit is described which is of the conventional configuration of two amplifiers in a circular loop, one producing zero phase shift and the other producing 180 phase reversal, in a circuit having medium Q composed of all field effect transistors of the same conductivity type. The current source to each gyrator amplifier comprises an amplifier which responds to changes in current, with the amplified signals feed back so as to limit current. The feedback amplifier has a large capacitor connected to bypass high frequency components, thereby stabilizing the output. The design makes possible fabrication of circuits with transistors of only one conductivity type, providing economies in manufacture and use.

Hochmair, E. S.↗