Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cell Physiology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Diatom volatile organic compound production is driven by diel metabolism and the cell cycle

Introduction: Volatile organic compounds (VOCs) are small, low-vapor-pressure molecules emitted from the surface ocean into the atmosphere. In the atmosphere, VOCs can change OH reactivity and condense onto particles to become cloud condensation nuclei. VOCs are produced by phytoplankton, but the conditions leading to VOC accumulation in the surface ocean are poorly understood.Methods: In this study, VOC accumulation was measured in real time over a 12 h day−12 h night cycle in the model diatom Phaeodactylum tricornutum during exponential growth.Results: Sixty-three m/z signals were produced in higher concentrations than in cell-free controls. All VOCs, except methanol, were continuously produced over 24 h. All VOCs accumulated to higher concentrations during the day compared to the night, and 11 VOCs exhibited distinct accumulation patterns during the morning hours. Twenty-seven VOCs were associated with known metabolic pathways in P. tricornutum, with most VOCs involved in amino acid and fatty acid metabolism.Discussion: Patterns of VOC production were strongly associated with diel shifts in cell physiology and the cell cycle. Diel VOC production patterns give a fundamental understanding of the first steps in VOC accumulation in the surface ocean.

Biological and medical sciences↗
DOE OSTI2025

Cyclization of archaeal membrane lipids impacts membrane protein activity and archaellum formation

Enhancement of the cyclization of membrane lipids GDGTs (glycerol dialkyl glycerol tetraethers) is a critical strategy for archaea to adapt to various environmental stresses. However, the physiological function of membrane lipid cyclization remains unclear. Here, we reported that the GDGT ring synthases mutant, deficient in GDGT cyclization, inhibited archaellum formation and reduced cell motility in thermoacidophilic crenarchaeon Sulfolobus acidocaldarius . This inhibition was caused by decreased transcription of the archaellum operon, likely due to cleavage of the C-terminal domains in transmembrane proteins ArnRs, the transcription factors that regulate archaellum operon expression. The transcriptomic and proteomic analysis showed deficiency of GDGT cyclization broadly impacted the expression of membrane associate proteins, including respiratory chain proteins, and decreased cellular ATP concentration. Moreover, phylogenetic analysis demonstrated that the correlation between GDGT cyclization and archaellum formation is widespread among (hyper)thermophilic archaea, and this was further verified in the euryarchaeon Thermococcus kodakarensis. Our findings suggested that archaea modify their membrane lipids to profoundly alter cellular appendages and cell physiology to adapt to environmental fluctuations.

Yang, Wei (ORCID:0000000262755981)↗
DOE OSTI2025

Physiological roles of an Acinetobacter -specific σ factor

ABSTRACT The Gram-negative pathogen Acinetobacter baumannii is considered an “urgent threat” to human health due to its propensity to become antibiotic resistant. Understanding the distinct regulatory paradigms used by A. baumannii to mitigate cellular stresses may uncover new therapeutic targets. Many γ-proteobacteria use the extracytoplasmic function (ECF) σ factor, RpoE, to invoke envelope homeostasis networks in response to stress. Acinetobacter species contain the poorly characterized ECF “SigAb”; however, it is unclear if SigAb has the same physiological role as RpoE. Here, we show that SigAb is a metal stress-responsive ECF that appears unique to Acinetobacter species and distinct from RpoE-like ECFs. We combine promoter mutagenesis, motif scanning, and chromatin immunoprecipitation-sequencing (ChIP-seq) to define the direct SigAb regulon, which consists of genes encoding SigAb itself, the stringent response mediator, RelA, and the uncharacterized small RNA, “SabS.” However, RNA-seq of strains overexpressing SigAb revealed a large, indirect regulon containing hundreds of genes. Metal resistance genes are key elements of the indirect regulon, as CRISPRi knockdown of sigAb or sabS resulted in increased copper sensitivity and excess copper-induced SigAb-dependent transcription. Furthermore, we found that two uncharacterized genes in the sigAb operon, “ aabA ” and “ aabB ,” have anti-SigAb activity. Finally, employing a targeted Tn-seq approach that uses CRISPR-associated transposons, we show that sigAb , aabA , and aabB are important for fitness even during optimal growth conditions. Our work reveals new physiological roles for SigAb and SabS, provides a novel approach for assessing gene fitness, and highlights the distinct regulatory architecture of A. baumannii . IMPORTANCE Acinetobacter baumannii is a hospital-acquired pathogen, and many strains are resistant to multiple antibiotics. Understanding how A. baumannii senses and responds to stress may uncover novel routes to treat infections. Here, we examine how the Acinetobacter -specific transcription factor, SigAb, mitigates stress. We find that SigAb directly regulates only a small number of genes, but indirectly controls hundreds of genes that have substantial impacts on cell physiology. We show that SigAb is required for maximal growth, even during optimal conditions, and is acutely required during growth in the presence of elevated copper. Given that copper toxicity plays roles in pathogenesis and on copper-containing surfaces in hospitals, we speculate that SigAb function may be important in clinically relevant contexts.

Bacon, Emily E. (ORCID:0000000180907689)↗
DOE OSTI2025

Mechanical Roles of Polysaccharide Assembly and Interactions in Plant Cell Walls

Plants synthesize polysaccharide-based primary cell walls that possess unique microstructures and mechanical properties to accommodate plant growth and provide protection. Here, it remains challenging to assess the role of polysaccharide organization and interactions in the mechanical behavior of primary cell walls owing to their complex microstructure and highly nonlinear mechanical responses. Employing a coarse-grained molecular dynamics model developed for onion epidermal walls, this work explores the conditions under which polysaccharide assembly and interactions might play a significant role in primary cell wall mechanics. Cellulose–cellulose adhesion plays a dominant role in the wall load-bearing capacity, but when cellulose–cellulose adhesion was disrupted computationally, cellulose–xyloglucan adhesion could influence the wall load-bearing capacity. Contrary to the common concept that xyloglucans mechanically tether well-separated cellulose microfibrils, xyloglucans functioned in this case as interfibrillar adhesives capable of transmitting tensile forces between cellulose microfibrils. Our findings may inform design criteria of new materials inspired by plant cell walls.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Pseudomonas aeruginosa Adhesion and Biofilm Formation on Poly(l-lysine)-Tethered Hydrogels: Synergistic Effect of Substrate Stiffness and Positive Charge Density

Infections associated with antibacterial-resistant Pseudomonas aeruginosa (P. aeruginosa) are the major cause of morbidity and mortality of patients, presenting one of the greatest therapeutic challenges for treatment of community-acquired and nosocomial infections. To develop antimicrobial hydrogel coatings to control the adhesion and subsequent biofilm formation of P. aeruginosa, we have used photo-cross-linked poly(ethylene glycol) diacrylate (PEGDA) hydrogels with varied cross-linking densities and covalently grafted poly(l-lysine) (PLL) at different weight compositions (ϕ PLL ). Both surface stiffness and positive charge density of the hydrogels were efficiently tuned over a broad range to investigate their effects on two main strains of P. aeruginosa, PA01 and PA14. We found that both number and viability of attached cells were positively correlated with the hydrogel stiffness, leading to thicker and larger coverage of cell colonies at 72 h postseeding on the stiffer substrates. The dependence of both PA01 and PA14 strains on ϕ PLL , however, was nonmonotonic. Positive charges from dissociated amine groups in the grafted PLL chains significantly promoted initial adhesion and proliferation of both strains at low ϕ PLL and developed into the thickest biofilms on the stiffest hydrogels grafted with ϕ PLL of 1–2%. Nevertheless, on the softest hydrogels grafted with PLL at high ϕ PLL of 7–10%, the bacteria no longer attached or survived. These results not only improved our fundamental understanding of bacteria-material interactions but also provided a series of PLL-grafted PEGDA hydrogels with controlled stiffness and positive charge density as ideal surface coating materials to prevent bacterial infections.

bacteria↗
DOE OSTI2025

A family of tubular pili from harmful algal bloom forming cyanobacterium Microcystis aeruginosa

Cyanobacteria are vital photosynthetic prokaryotes, but some form harmful algal blooms (cyanoHABs) that disrupt ecosystems and produce toxins. The mechanisms by which these blooms form have yet to be fully understood, particularly the role of extracellular components. Here, we present a 2.4 Å cryo-EM structure of a pilus, termed the cyanobacterial tubular (CT) pilus, found in the cyanoHAB-forming Microcystis aeruginosa. The pilin exhibits a unique protein fold, forming a tubular pilus structure with tight, double-layer anti-parallel β-sheet interactions. We show that CT pili are essential for buoyancy by facilitating the formation of micro-colonies, which increases drag force and prevents sinking. The CT pilus surface is heavily glycosylated with ten monosaccharide modifications per pilin. Furthermore, CT pili can enrich microcystin, potentially enhancing cellular resilience, and co-localize with iron-enriched extracellular matrix components. Thus, we propose that this pilus plays an important role in the proliferation of cyanoHABs. This just discovered pilus family appears to be widely distributed across several cyanobacterial orders. Our structural and functional characterization of CT pili provide insights into cyanobacterial cell morphology, physiology, and toxin interactions, and identify potential targets for disrupting bloom formation.

Cryoelectron microscopy↗
DOE OSTI2025

Fabrication of a novel 3D-printed perfusion bioreactor for complex cell culture models

We introduce a novel fabrication method for developing a 3D-printed perfusion bioreactor (3D-PBR) to facilitate the in situ growth and differentiation of human bone marrow (BM)-derived mesenchymal stem cells (MSCs) while enabling coculture with vascular cells. To recapitulate human physiology, in vitro platforms must incorporate several key features of their native target organ. This often entails a supportive 3D architecture for growing and differentiating multiple human cell types in situ under perfusion. Other essential characteristics include reproducibility, ease of customization, and biocompatibility. Our 3D-PBR combines these features and was fabricated using a biocompatible resin-based polymer, which was 3D-printed, followed by the addition of a permeable membrane to create a coculture microenvironment. MSCs were encapsulated in a collagen-fibrin gel alongside human endothelium within the 3D-PBR. The physical cues that our 3D-PBR provided facilitated the differentiation of MSCs into specific lineages, such as adipocytes and osteoblasts. Immunohistochemistry images demonstrated that cells grown in the 3D-PBR exhibited more physiologically relevant BM perivascular niche markers compared to static culture models. Our method utilizes emerging 3D printing techniques and alternative materials, departing from traditional PDMS-based soft lithography. These advancements in fabrication further enhance in vitro platforms for diverse cell culture models and vascular permeability assays.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Converting methoxy groups on lignin-derived aromatics from a toxic hurdle to a useful resource: a systems-driven approach

Lignin conversion to bioproducts is challenging for several reasons, including the toxicity generated from the abundant methoxy groups released as formaldehyde. Consequently, our project used the best understood methylotroph – for which there is growing knowledge of formaldehyde stress responses – to explore how genetic factors and single-cell phenotypic heterogeneity contribute to growth and production. Our major goals were to (1) understand the fundamentals of Methylobacterium growth on aromatics, (2) identify and understand the basis of physiological basis of single-cell heterogeneity, and (3) develop quantitative models that relate heterogeneity to physiological and evolutionary outcomes.

Source record↗
DOE OSTI2025

Machine learning models for segmentation and classification of cyanobacterial cells

Abstract Timelapse microscopy has recently been employed to study the metabolism and physiology of cyanobacteria at the single-cell level. However, the identification of individual cells in brightfield images remains a significant challenge. Traditional intensity-based segmentation algorithms perform poorly when identifying individual cells in dense colonies due to a lack of contrast between neighboring cells. Here, we describe a newly developed software package called Cypose which uses machine learning (ML) models to solve two specific tasks: segmentation of individual cyanobacterial cells, and classification of cellular phenotypes. The segmentation models are based on the Cellpose framework, while classification is performed using a convolutional neural network named Cyclass. To our knowledge, these are the first developed ML-based models for cyanobacteria segmentation and classification. When compared to other methods, our segmentation models showed improved performance and were able to segment cells with varied morphological phenotypes, as well as differentiate between live and lysed cells. We also found that our models were robust to imaging artifacts, such as dust and cell debris. Additionally, the classification model was able to identify different cellular phenotypes using only images as input. Together, these models improve cell segmentation accuracy and enable high-throughput analysis of dense cyanobacterial colonies and filamentous cyanobacteria.

Huffine, Clair A.↗
DOE OSTI2024

Unraveling the Combined Photothermal Stability of Common Perovskite Solar Cell Compositions

In halide perovskite solar cells, certain compositions, especially those with a high mixture of anions, degrade rapidly. Here, in this study, a degradation study compares the photo (exposure to light), thermal (exposure to elevated temperatures), and photo-plus-thermal (combination) stability of three representative perovskite compositions chosen for their relatively high performance and to independently test anion versus cation effects. Based upon experience and reports, the compositions studied are triple cation with a high Br ratio (Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.5 Br 0.5 ) 3 ), all iodide with a moderately high Cs ratio (FA 0.8 Cs 0.2 PbI 3 ), and FA-dominated triple cation (Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.98 Br 0.02 ) 3 ). Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.98 Br 0.02 ) 3 displayed the best combined photo-plus-thermal stability. Degradation mechanisms were investigated by comparing the morphology, surface composition, and bulk and interface carrier dynamics. Under the harshest aging conditions (photo-plus-thermal), phase segregation and vaporization of organic cations occurred, along with the appearance of high-energy states indicating the interaction with C 60 . The findings were verified on perovskite films blade-coated in air used in devices (FTO/NiOx/SAM/Perovskite/C 60 /BCP/Cu), achieving an efficiency of 21.9% alongside correlated stability.

14 SOLAR ENERGY↗
DOE OSTI2025

ER stress and viral defense: Advances and future perspectives on plant unfolded protein response in pathogenesis

Viral infections pose significant threats to crop productivity and agricultural sustainability. The frequency and severity of these infections are increasing, and pathogens are evolving rapidly under the influence of climate change. This underscores the importance of exploring the fundamental mechanisms by which plants defend themselves against dynamic viral threats. One such mechanism is the unfolded protein response (UPR), which is activated when the protein folding demand exceeds the capacity of the endoplasmic reticulum, particularly under adverse environmental conditions. While the key regulators of the UPR in response to viral infections have been identified, our understanding of how they modulate the UPR to suppress plant viral infections at the molecular and genetic levels is still in its infancy. Recent findings have shown that, in response to plant viral infections, the UPR swiftly reprograms transcriptional changes to support cellular, metabolic, and physiological processes associated with cell viability. However, the underlying mechanisms and functional outcomes of these changes remain largely unexplored. Here, we highlight recent advances in plant UPR research and summarize key findings related to viral infection–induced UPR, focusing on the balance between prosurvival and prodeath strategies. We also discuss the potential of systems-level approaches to uncover the full extent of the functional link between the UPR and plant responses to viral infections.

ER stress↗
DOE OSTI2026

Microfibril orientation and compositional heterogeneity in fiber and vessel cell walls of poplar xylem studied by AFM-IR and SFG spectroscopy

Understanding the structural organization of cellulose microfibrils (CMFs) within individual plant cell walls is essential for connecting cell wall architecture to its mechanical and physiological functions. However, due to the complex hierarchical structure and nanoscale heterogeneity of cell walls, it remains technically challenging to resolve detailed compositional and orientational information at subcellular levels of individual cell walls. This study investigates the internal 3D structure, chemical composition, and sublayer organization of fiber and vessel cell walls in the xylem tissue of a two-year-old field-grown hybrid poplar tree (Populus alba × P. glandulosa) using photothermal atomic force microscopy coupled with infrared spectroscopy (AFM-IR) and sum frequency generation (SFG) hyperspectral microscopy. AFM-IR provided nanoscale chemical imaging, revealing localized compositional heterogeneity, including variations between adjacent cell walls and transitional layers beyond the traditional S1, S2, and S3 sublayers. SFG microscopy revealed that CMFs in fiber walls are highly aligned along the stem axis, consistent with their role in mechanical support, while vessel cell walls exhibited slightly tilted CMFs, reflecting their function in hydraulic transport. Together, these results offer new insights into cell-type-specific CMF organization and compositional gradients in hybrid poplar xylem. These findings highlight the structural and chemical complexity of secondary cell walls in woody plants and demonstrate the value of AFM-IR and SFG spectroscopy in elucidating plant cell wall architecture.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Packaging “vegetable oils”: Insights into plant lipid droplet proteins

Abstract Plant neutral lipids, also known as “vegetable oils”, are synthesized within the endoplasmic reticulum (ER) membrane and packaged into subcellular compartments called lipid droplets (LDs) for stable storage in the cytoplasm. The biogenesis, modulation, and degradation of cytoplasmic LDs in plant cells are orchestrated by a variety of proteins localized to the ER, LDs, and peroxisomes. Recent studies of these LD-related proteins have greatly advanced our understanding of LDs not only as steady oil depots in seeds but also as dynamic cell organelles involved in numerous physiological processes in different tissues and developmental stages of plants. In the past 2 decades, technology advances in proteomics, transcriptomics, genome sequencing, cellular imaging and protein structural modeling have markedly expanded the inventory of LD-related proteins, provided unprecedented structural and functional insights into the protein machinery modulating LDs in plant cells, and shed new light on the functions of LDs in nonseed plant tissues as well as in unicellular algae. Here, we review critical advances in revealing new LD proteins in various plant tissues, point out structural and mechanistic insights into key proteins in LD biogenesis and dynamic modulation, and discuss future perspectives on bridging our knowledge gaps in plant LD biology.

Cai, Yingqi (ORCID:0000000203575809)↗
DOE OSTI2025

Laminarin stimulates single cell rates of sulfate reduction whereas oxygen inhibits transcriptomic activity in coastal marine sediment

Abstract The chemical cycles carried out by bacteria and archaea living in coastal sediments are vital aspects of benthic ecology. These ecosystems are subject to physical disruption, which may allow for increased respiration and complex carbon consumption—impacting chemical cycling in this environment often thought to be a terminal place of deposition. We use the redox-enzyme sensitive probe RedoxSensor Green to measure rates of electron transfer physiology in individual sulfate reducer cells residing in anoxic sediment, subjected to transient exposure of oxygen and laminarin. We use index fluorescence activated cell sorting and single cell genomics sequencing to link those measurements to genomes of respiring cells. We measure per-cell sulfate reduction rates in marine sediments (0.01–4.7 fmol SO42− cell−1 h−1) and determine that cells within the Chloroflexota phylum are the most active in respiration. Chloroflexota respiration activity is also stimulated with the addition of laminarin, even in marine sediments already rich in organic matter. Evaluating metatranscriptomic data alongside this respiration-based technique, Chloroflexota genomes encode laminarinases indicating a likely ability to degrade laminarin. We also provide evidence that abundant Patescibacteria cells do not use electron transport pathways for energy, and instead likely carry out fermentation of polysaccharides. There is a decoupling of respiration-related activity rates from transcription, as respiration rates increase while transcription decreases with oxygen exposure. Overall, we reveal an active community of respiring Chloroflexota that cycles sulfate at potential rates of 23–40 nmol h−1 per cm3 sediment in incubation settings, and non-respiratory Patescibacteria that can cycle complex polysaccharides.

Lindsay, Melody R.↗
DOE OSTI2024

Growth rate as a link between microbial diversity and soil biogeochemistry

The growth rate of a microorganism is a simple yet profound way to quantify its impact on the world. The absolute growth rate of a microbial population reflects rates of resource assimilation, biomass production, and element transformation, some of the many ways that organisms affect Earth’s ecosystems and climate. Microbial fitness in the environment depends on the ability to reproduce quickly when conditions are favorable and adopt a survival physiology when conditions worsen, which cells coordinate by adjusting their relative growth rate. At the population level, relative growth rate is a sensitive metric of fitness, linking survival and reproduction to the ecology and evolution of populations. Techniques combining ‘omics and stable isotope probing enable sensitive measurements of growth rates of microbial assemblages and individual taxa in soil. Microbial ecologists can explore how the growth rates of taxa with known traits and evolutionary histories respond to changes in resource availability, environmental conditions, and interactions with other organisms. We anticipate that quantitative and scalable data on the growth rates of soil microorganisms, coupled with measurements of biogeochemical fluxes, will allow scientists to test and refine ecological theory and advance process-based models of carbon flux, nutrient uptake, and ecosystem productivity. Finally, measurements of in situ microbial growth rates provide insights into the ecology of populations and can be used to quantitatively link microbial diversity to soil biogeochemistry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Multicellular magnetotactic bacteria are genetically heterogeneous consortia with metabolically differentiated cells

Consortia of multicellular magnetotactic bacteria (MMB) are currently the only known example of bacteria without a unicellular stage in their life cycle. Because of their recalcitrance to cultivation, most previous studies of MMB have been limited to microscopic observations. To study the biology of these unique organisms in more detail, we use multiple culture-independent approaches to analyze the genomics and physiology of MMB consortia at single-cell resolution. We separately sequenced the metagenomes of 22 individual MMB consortia, representing 8 new species, and quantified the genetic diversity within each MMB consortium. This revealed that, counter to conventional views, cells within MMB consortia are not clonal. Single consortia metagenomes were then used to reconstruct the species-specific metabolic potential and infer the physiological capabilities of MMB. To validate genomic predictions, we performed stable isotope probing (SIP) experiments and interrogated MMB consortia using fluorescence in situ hybridization (FISH) combined with nanoscale secondary ion mass spectrometry (NanoSIMS). By coupling FISH with bioorthogonal noncanonical amino acid tagging (BONCAT), we explored their in situ activity as well as variation of protein synthesis within cells. We demonstrate that MMB consortia are mixotrophic sulfate reducers and that they exhibit metabolic differentiation between individual cells, suggesting that MMB consortia are more complex than previously thought. These findings expand our understanding of MMB diversity, ecology, genomics, and physiology, as well as offer insights into the mechanisms underpinning the multicellular nature of their unique lifestyle.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Functional role of myosin-binding protein H in thick filaments of developing vertebrate fast-twitch skeletal muscle

Myosin-binding protein H (MyBP-H) is a component of the vertebrate skeletal muscle sarcomere with sequence and domain homology to myosin-binding protein C (MyBP-C). Whereas skeletal muscle isoforms of MyBP-C (fMyBP-C, sMyBP-C) modulate muscle contractility via interactions with actin thin filaments and myosin motors within the muscle sarcomere “C-zone,” MyBP-H has no known function. This is in part due to MyBP-H having limited expression in adult fast-twitch muscle and no known involvement in muscle disease. Quantitative proteomics reported here reveal that MyBP-H is highly expressed in prenatal rat fast-twitch muscles and larval zebrafish, suggesting a conserved role in muscle development and prompting studies to define its function. We take advantage of the genetic control of the zebrafish model and a combination of structural, functional, and biophysical techniques to interrogate the role of MyBP-H. Transgenic, FLAG-tagged MyBP-H or fMyBP-C both localize to the C-zones in larval myofibers, whereas genetic depletion of endogenous MyBP-H or fMyBP-C leads to increased accumulation of the other, suggesting competition for C-zone binding sites. Does MyBP-H modulate contractility in the C-zone? Globular domains critical to MyBP-C’s modulatory functions are absent from MyBP-H, suggesting that MyBP-H may be functionally silent. However, our results suggest an active role. In vitro motility experiments indicate MyBP-H shares MyBP-C’s capacity as a molecular “brake.” These results provide new insights and raise questions about the role of the C-zone during muscle development.

59 BASIC BIOLOGICAL SCIENCES↗