Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ca-Mg”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Electrochemical Formation of Li-M-(M')-Si Phases Using Multivalent Electrolyte Salt Additives

Lithium-rich silicides (Li 15 Si 4 ), formed during the electrochemical lithiation of silicon, show high reactivity with electrolyte components that contribute to capacity decay, formal lithium loss, and low coulombic efficiency. Recently, the reactivity of lithium silicides was found to be suppressed by substituting a multivalent cation (i.e. Mg, Ca) for lithium that results in the room temperature formation of a ternary Li-M-Si phase. In this study, we explored a range of multivalent electrolyte salt additives (M = Ni, Cu, La, Ce, Sr, Ba, and Ca-Mg mixed salt) in a lithium-ion cell configuration and identified a room temperature electrochemical route to the formation of new ternary and quaternary lithium silicides. Using this method, both nickel and copper salts were found to plate onto the silicon electrode surface upon lithiation. Further, based on refined synchrotron XRD data, multivalent cations with an ionic radius similar to Na (~1.03 Å) or smaller can be inserted electrochemically into a formally cation-deficient Li 15 Si 4 host lattice to form new ternary (or quartenary) phases. The electrochemical synthesis of a new quaternary Li-M-M’-Si phase represents a facile route to preparing and scaling materials isostructural to the Heusler phase and electron-precise Li 14 MgSi 4 phase that results in enhanced cycling and calendar life performance.

25 ENERGY STORAGE↗

Precipitation of low-temperature disordered dolomite induced by extracellular polymeric substances of methanogenic Archaea Methanosarcina barkeri : Implications for sedimentary dolomite formation

Abstract A correlation between methanogenesis and dolomite formation has been reported; however, the mechanism underlying this association is not fully understood. In this study, we conducted forced carbonate precipitation experiments at room temperature in calcite-seeded Ca/Mg carbonate solutions containing either purified non-living biomass or bound extracellular polymeric substances (EPS) of the methanogen Methanosarcina barkeri. Purified non-living biomass and bound EPS was used so as to avoid the possible influence of the complex components of the growing microbial culture on carbonate crystallization. Our results demonstrated that non-living biomass of M. Barkeri can enhance the Mg incorporation into calcitic structure and induce the crystallization of disordered dolomite. In the presence of ~113 mg L–1 of non-living biomass, disordered dolomite with ~41 and 45 mol% of MgCO3 was precipitated in solutions with initial Mg:Ca ratios of 5:1 and 8:1, respectively. A systematic increase in the MgCO3 contents of the precipitated Ca-Mg carbonates was also observed with the increased non-living biomass concentration. Bound EPS was shown to be the component of non-living biomass that catalyzed the precipitation of disordered dolomite. At only ~25 mg L–1 of bound EPS, disordered dolomite with ~47 and 48 mol% of MgCO3 was precipitated in solutions with initial Mg:Ca ratios of 5:1 and 8:1, respectively. We propose that adsorption of bound EPS to growing carbonate surfaces through hydrogen bonding is the key to catalyzing disordered dolomite crystallization, and that this mechanism is also applicable to natural EPS-induced dolomite formation. This study provides significant insight into the formation mechanism of microbial-induced dolomite with high δ13C values.

Geochemistry & Geophysics↗

The formation of goethite and hydrated clay minerals on Mars

Laboratory studies reported by Huguenin (1973) on the kinetics and mechanism of the photostimulated oxidation of magnetic and preliminary laboratory data on the weathering of silicates, reported herein, are applied to Mars. Basalts in the Martian dark areas are predicted to alter to hydrated Fe(2 plus or minus) depleted clay minerals, minor goethite, and minor to trace amounts of transition metal oxides such as TiO2, MnO2, and Cr2O3 at a rate of 10 to the minus 1.5 plus or minus 1.5 micron/yr. Some Ca-Mg carbonates are also expected to be formed. The clay minerals are predicted to be more silica-rich than the silicate source material, SiO2 contents of 60% or higher being expected, and strongly depleted in Fe(2+). The oxygen, OH, and H2O contents of the bulk weathering product are predicted to be significantly greater than those of the dark-area source materials, whereas the relative bulk metal abundances should be the same.

Huguenin, R. L.↗

Zaoyang chondrite cooling history from pyroxene Fe(2+)-Mg intracrystalline ordering and exolutions

The Zaoyang ordinary chondrite fell as a single 14.15-kg mass in Hubey province (China) in October 1984 and was classified as a non-brecciated H5 chondrite, shock facies b. Cooling rate in pyroxenes can be calculated down to about 1000 C by using fine textures and at still lower temperatures (700 to 200 C) by intracrystalline ordering processes. The crystal chemistry of clinopyroxene and orthopyroxene from the matrix of the H5 Zaoyang chondrite has been investigated by X-ray structure refinement and detailed microprobe analysis. By comparison with terrestrial pyroxenes cell and polyhedral volumes in clino- and orthopyroxenes show a low crystallization pressure. Fe(2+) and Mg are rather disordered in M1 and M2 sites of clino- and orthopyroxenes; the closure temperatures of the exchange reaction are 600 and 512 C respectively, which is consistent with a quite fast cooling rate, estimated of the order of one degree per day. The closure temperature for the intercrystalline Ca-Mg exchange reaction for clino- and orthopyroxene showing clinopyroxene lamellae about 10 microns thick. Kinetic evaluations based on the thickness of exolved lamellae give a cooling rate of not more than a few degrees per 10(exp 4) years. The different cooling rates obtained from Fe(2+)-Mg intracrystalline partitioning and exolution lamellae suggest an initial episode of slow cooling at 900 C, followed by faster cooling at temperatures of 600-500 C at low pressure conditions. The most probable scenario of the meteorite history seems that the exolved orthopyroxene entered the parental chondrite body after exolution had taken place at high temperature. Subsequent fast cooling occurred at low temperature after the formation of the body.

Molin, G. M.↗

CM chondrites exhibit the complete petrologic range from type 2 to 1

Recognition and characterization of the different CM lithologies as components in all meteorites could reveal details of the nature and chronology of alteration and brecciation events on hydrous asteroids. The CM chondrites are of particular interest, as they are the most common carbonaceous chondrites and are found as clasts within other types of meteorites, which suggests that the CM parent asteroids are (or were) widespread in the sections of the asteroid belt providing samples to Earth. Some CM2s, including EET 90047, ALH 83100, and Y 82042, are more 'extensively' altered, and are distinguished by a high proportion of Mg-rich phyllosilicates and Ca-Mg carbonates, frequently in rounded aggregates, and near absence of olivine or pyroxene. 'Completely' altered CMs, called CM1s, essentially lack olivine or pyroxene; these include EET 83334, ALH 88045, and the CM1 clasts in Kaidun. Cold Bokkeveld and EET 84034, both highly brecciated CMs, consist of both extensively and completely altered lithologies. We describe how these lithologies further cosntrain physicochemical conditions on hydrous asteroids. We conclude that CM chondrites exhibit the petrologic range 2 through 1, and that progressive alteration on the parent hydrous asteroid(s) was accompanied by significant increases in temperature (to a peak of approximately 450 C), fO2, water-rock ratio, and (locally) degree of chemical leaching, all well beyond the conditions recorded by CM2s.

Zolensky, M. E.↗

Mini-TES Observations of Comanche Carbonate and Its Distribution

The discovery by the Spirit rover of outcrops rich in Mg-Fe carbonate [Morris et al., 2010] represents another manifestation of a diverse aqueous history in Gusev crater. In 2005, observations by the Moessbauer spectrometer (MB) on outcrops dubbed Comanche provided initial indication of Fe-Mg carbonate that was subsequently supported by analysis of elemental data from the Alpha Particle X-ray Spectrometer (APXS). The recognition of a carbonate component in thermal infrared spectra measured by the Miniature Thermal Emission Spectrometer (Mini-TES) was significantly delayed due to dust contamination of the instrument's optics. With the implementation of a viable dust correction, the Comanche spectra were revisited and presented clear and compelling evidence for a Mg-Fe carbonate component that could be as much as a third of the total mineral abundance. The data from all three instruments in combination are best matched by Mg-Fe carbonate with an abundance of 16-34 wt%. Mini-TES spectra were acquired for 12 targets at various locations on the Comanche (4-5 m long) and Comanche Spur (1-2 m long) outcrops, the latter being the location of the MB and APXS measurements. The two outcrops are spectrally comparable and share similar morphology and texture based on color images from the Panoramic Camera (Pancam). The highest quality Mini-TES spectrum comes from the larger Comanche outcrop on a target named Saupitty. Linear least squares modeling of the Saupitty spectrum employed a library of laboratory spectra tailored for consistency with the APXS and MB data and included spectra representing Martian dust, a slope spectrum to account for any temperature determination errors, and a blackbody spectrum to account for differences in spectral contrast between the laboratory and Mini-TES spectrum. Successful modeling of the Comanche Saupitty spectrum required one or more carbonate phases to obtain a good fit. Excluding all carbonates from the full starting library more than doubled the root-mean-squared error of the model fit (0.147% vs. 0.299%). Because Mg-Fe carbonate and Ca-Mg carbonate (dolomite) are so spectrally similar over the range used for modeling, both provide a comparable fit. However, Carich carbonates like dolomite are precluded based on APXS data and are inconsistent with MB results. The Comanche carbonate rocks are stratigraphically above a set of olivine-rich volcaniclastic rocks known as Algonquin class that mantle the Haskin Ridge feature of the Columbia Hills. Based on ~50 Mini-TES observations, the Comanche outcrops are the only rocks that host abundant carbonate. However, a target at the base of the larger Comanche outcrop appears spectrally transitional between the carbonate and olivine units. This transitional spectral character applies to additional outcrops a few 10s of meters away from Comanche that also appear stratigraphically transitional. Additional work will attempt to establish whether we are seeing an alteration horizon or depositional unit associated with the emplacement Comanche carbonate.

Ruff, Steven W.↗

Eucrite Impact Melt NWA 5218 - Evidence for a Large Crater on Vesta

Northwest Africa (NWA) 5218 is a 76 g achondrite that is classified as a eucrite [1]. However, an initial classification [2] describes it as a "eucrite shock-melt breccia...(in which) large, partially melted cumulate basalt clasts are set in a shock melt flow...". We explore the petrology of this clast-bearing impact melt rock (Fig. 1), which could be a characteristic lithology at large impact craters on asteroid Vesta [3]. Methods: Optical microscopy, scanning electronmicroscopy, and Raman spectroscopy were used on a thin section (Fig. 1) for petrographic characterization. The impact melt composition was determined by 20 m diameter defocused-beam analyses with a Cameca SX-100 electron microprobe. The data from 97 spots were corrected for mineral density effects [4]. Constituent mineral phases were analyzed with a focusedbeam. Bidirectonal visible and near-infrared (VNIR) and biconical FT-IR reflectance spectra were measured on the surface of a sample slab on its central melt area and on an eucrite clast, and from 125-500 m and <125 m powders of melt. Results: General petrography: The sample specimen is a coherent, medium dark-grey (N4), melt rock. The thin section captures a central, subophitic-textured melt that contains ~1 cm to tens of m-size subangular to rounded, variably-shocked eucrite clasts. Clasts >100 m are coarse-grained with equigranular ~1 mm size plagioclase, quartz, and clinopyroxene (Fig. 1). Single crystals of chromite, ilmenite, zircon, Ca-Mg phosphate, Fe-metal, and troilite are embedded in the melt. Polymineralic clasts are mostly compositionally similar to the above mentioned larger clasts but scarce granulitic fragments are observed as well.

Wittmann, Axel↗

Materials Data on CaMg2 by Materials Project

Mg2Ca is Hexagonal Laves structured and crystallizes in the hexagonal P6_3/mmc space group. The structure is three-dimensional. Ca is bonded in a 12-coordinate geometry to four equivalent Ca and twelve Mg atoms. There are one shorter (3.76 Å) and three longer (3.82 Å) Ca–Ca bond lengths. There are a spread of Ca–Mg bond distances ranging from 3.60–3.67 Å. There are two inequivalent Mg sites. In the first Mg site, Mg is bonded to six equivalent Ca and six equivalent Mg atoms to form a mixture of corner, edge, and face-sharing MgCa6Mg6 cuboctahedra. All Mg–Mg bond lengths are 3.10 Å. In the second Mg site, Mg is bonded to six equivalent Ca and six Mg atoms to form a mixture of corner, edge, and face-sharing MgCa6Mg6 cuboctahedra. There are two shorter (3.09 Å) and two longer (3.17 Å) Mg–Mg bond lengths.

36 MATERIALS SCIENCE↗

Materials Data on CaMg7 by Materials Project

CaMg7 crystallizes in the hexagonal P-6m2 space group. The structure is three-dimensional. Ca is bonded to twelve Mg atoms to form CaMg12 cuboctahedra that share corners with six equivalent CaMg12 cuboctahedra, corners with twelve MgCa2Mg10 cuboctahedra, edges with eighteen MgCa2Mg10 cuboctahedra, faces with two equivalent CaMg12 cuboctahedra, and faces with eighteen MgCa2Mg10 cuboctahedra. There are six shorter (3.28 Å) and six longer (3.32 Å) Ca–Mg bond lengths. There are four inequivalent Mg sites. In the first Mg site, Mg is bonded to two equivalent Ca and ten Mg atoms to form distorted MgCa2Mg10 cuboctahedra that share corners with four equivalent CaMg12 cuboctahedra, corners with fourteen MgCa2Mg10 cuboctahedra, edges with two equivalent CaMg12 cuboctahedra, edges with sixteen MgCa2Mg10 cuboctahedra, faces with two equivalent CaMg12 cuboctahedra, and faces with eighteen MgCa2Mg10 cuboctahedra. There are a spread of Mg–Mg bond distances ranging from 3.24–3.37 Å. In the second Mg site, Mg is bonded to two equivalent Ca and ten Mg atoms to form distorted MgCa2Mg10 cuboctahedra that share corners with four equivalent CaMg12 cuboctahedra, corners with fourteen MgCa2Mg10 cuboctahedra, edges with two equivalent CaMg12 cuboctahedra, edges with sixteen MgCa2Mg10 cuboctahedra, faces with two equivalent CaMg12 cuboctahedra, and faces with eighteen MgCa2Mg10 cuboctahedra. There are a spread of Mg–Mg bond distances ranging from 3.24–3.37 Å. In the third Mg site, Mg is bonded to two equivalent Ca and ten Mg atoms to form distorted MgCa2Mg10 cuboctahedra that share corners with eighteen MgCa2Mg10 cuboctahedra, edges with four equivalent CaMg12 cuboctahedra, edges with fourteen MgCa2Mg10 cuboctahedra, faces with two equivalent CaMg12 cuboctahedra, and faces with eighteen MgCa2Mg10 cuboctahedra. There are a spread of Mg–Mg bond distances ranging from 3.25–3.39 Å. In the fourth Mg site, Mg is bonded to twelve Mg atoms to form MgMg12 cuboctahedra that share corners with eighteen MgCa2Mg10 cuboctahedra, edges with eighteen MgCa2Mg10 cuboctahedra, faces with six equivalent CaMg12 cuboctahedra, and faces with fourteen MgCa2Mg10 cuboctahedra.

36 MATERIALS SCIENCE↗

Materials Data on CaMg by Materials Project

MgCa crystallizes in the trigonal R-3m space group. The structure is three-dimensional. Ca is bonded to six equivalent Ca and six equivalent Mg atoms to form a mixture of distorted corner, edge, and face-sharing CaCa6Mg6 cuboctahedra. All Ca–Ca bond lengths are 3.66 Å. All Ca–Mg bond lengths are 3.53 Å. Mg is bonded in a distorted hexagonal planar geometry to six equivalent Ca atoms.

36 MATERIALS SCIENCE↗

Materials Data on CaMg15 by Materials Project

CaMg15 crystallizes in the hexagonal P-6m2 space group. The structure is three-dimensional. Ca is bonded to twelve Mg atoms to form CaMg12 cuboctahedra that share corners with six equivalent CaMg12 cuboctahedra, corners with twelve equivalent MgMg12 cuboctahedra, edges with eighteen MgCaMg11 cuboctahedra, and faces with twenty MgMg12 cuboctahedra. There are six shorter (3.26 Å) and six longer (3.27 Å) Ca–Mg bond lengths. There are six inequivalent Mg sites. In the first Mg site, Mg is bonded to twelve Mg atoms to form MgMg12 cuboctahedra that share corners with eighteen MgMg12 cuboctahedra, edges with eighteen MgCaMg11 cuboctahedra, faces with two equivalent CaMg12 cuboctahedra, and faces with eighteen MgMg12 cuboctahedra. There are six shorter (3.17 Å) and six longer (3.27 Å) Mg–Mg bond lengths. In the second Mg site, Mg is bonded to two equivalent Ca and ten Mg atoms to form distorted MgCa2Mg10 cuboctahedra that share corners with eighteen MgMg12 cuboctahedra, edges with two equivalent CaMg12 cuboctahedra, edges with sixteen MgCaMg11 cuboctahedra, faces with two equivalent CaMg12 cuboctahedra, and faces with eighteen MgCa2Mg10 cuboctahedra. There are a spread of Mg–Mg bond distances ranging from 3.21–3.33 Å. In the third Mg site, Mg is bonded to twelve Mg atoms to form MgMg12 cuboctahedra that share corners with four equivalent CaMg12 cuboctahedra, corners with fourteen MgCa2Mg10 cuboctahedra, edges with eighteen MgCaMg11 cuboctahedra, and faces with twenty MgMg12 cuboctahedra. There are a spread of Mg–Mg bond distances ranging from 3.16–3.27 Å. In the fourth Mg site, Mg is bonded to one Ca and eleven Mg atoms to form distorted MgCaMg11 cuboctahedra that share corners with eighteen MgCaMg11 cuboctahedra, edges with two equivalent CaMg12 cuboctahedra, edges with sixteen MgMg12 cuboctahedra, a faceface with one CaMg12 cuboctahedra, and faces with nineteen MgMg12 cuboctahedra. There are a spread of Mg–Mg bond distances ranging from 3.24–3.30 Å. In the fifth Mg site, Mg is bonded to one Ca and eleven Mg atoms to form distorted MgCaMg11 cuboctahedra that share corners with eighteen MgCaMg11 cuboctahedra, edges with two equivalent CaMg12 cuboctahedra, edges with sixteen MgMg12 cuboctahedra, a faceface with one CaMg12 cuboctahedra, and faces with nineteen MgMg12 cuboctahedra. There are a spread of Mg–Mg bond distances ranging from 3.16–3.27 Å. In the sixth Mg site, Mg is bonded to twelve Mg atoms to form MgMg12 cuboctahedra that share corners with eighteen MgCaMg11 cuboctahedra, edges with eighteen MgCaMg11 cuboctahedra, faces with three equivalent CaMg12 cuboctahedra, and faces with seventeen MgMg12 cuboctahedra.

36 MATERIALS SCIENCE↗

Materials Data on Ca2Mg by Materials Project

Ca2Mg is Molybdenite structured and crystallizes in the hexagonal P6_3/mmc space group. The structure is two-dimensional and consists of two Ca2Mg sheets oriented in the (0, 0, 1) direction. Ca is bonded to three equivalent Mg atoms to form a mixture of distorted corner and face-sharing CaMg3 cuboctahedra. All Ca–Mg bond lengths are 3.53 Å. Mg is bonded in a 6-coordinate geometry to six equivalent Ca atoms.

36 MATERIALS SCIENCE↗

Materials Data on Ca2Mg by Materials Project

Ca2Mg crystallizes in the hexagonal P-6m2 space group. The structure is three-dimensional. there are three inequivalent Ca sites. In the first Ca site, Ca is bonded to twelve Ca atoms to form a mixture of corner, edge, and face-sharing CaCa12 cuboctahedra. There are six shorter (3.79 Å) and six longer (3.88 Å) Ca–Ca bond lengths. In the second Ca site, Ca is bonded to three equivalent Ca and three equivalent Mg atoms to form distorted CaCa3Mg3 cuboctahedra that share corners with eighteen CaCa12 cuboctahedra, edges with twelve CaCa12 cuboctahedra, and faces with two CaCa3Mg3 cuboctahedra. All Ca–Mg bond lengths are 3.50 Å. In the third Ca site, Ca is bonded to six equivalent Mg atoms to form distorted CaMg6 cuboctahedra that share corners with twelve equivalent CaCa3Mg3 cuboctahedra, edges with six equivalent CaMg6 cuboctahedra, and faces with two equivalent CaCa3Mg3 cuboctahedra. All Ca–Mg bond lengths are 3.56 Å. Mg is bonded in a 6-coordinate geometry to six Ca atoms.

36 MATERIALS SCIENCE↗

Materials Data on Ca5Mg by Materials Project

Ca5Mg crystallizes in the monoclinic Cm space group. The structure is three-dimensional. there are five inequivalent Ca sites. In the first Ca site, Ca is bonded to ten Ca and two equivalent Mg atoms to form distorted CaCa10Mg2 cuboctahedra that share corners with twelve CaCa10Mg2 cuboctahedra, edges with nine CaCa8Mg2 cuboctahedra, and faces with fourteen CaCa10Mg2 cuboctahedra. There are a spread of Ca–Ca bond distances ranging from 3.75–4.00 Å. Both Ca–Mg bond lengths are 3.65 Å. In the second Ca site, Ca is bonded in a 11-coordinate geometry to nine Ca and two equivalent Mg atoms. There are a spread of Ca–Ca bond distances ranging from 3.59–3.83 Å. Both Ca–Mg bond lengths are 3.75 Å. In the third Ca site, Ca is bonded to eight Ca and two equivalent Mg atoms to form distorted CaCa8Mg2 cuboctahedra that share corners with fourteen CaCa8Mg2 cuboctahedra, edges with five CaCa10Mg2 cuboctahedra, and faces with fourteen CaCa10Mg2 cuboctahedra. There are a spread of Ca–Ca bond distances ranging from 3.83–3.99 Å. Both Ca–Mg bond lengths are 3.64 Å. In the fourth Ca site, Ca is bonded to eleven Ca and one Mg atom to form a mixture of distorted corner, edge, and face-sharing CaCa11Mg cuboctahedra. There are two shorter (3.82 Å) and two longer (3.84 Å) Ca–Ca bond lengths. The Ca–Mg bond length is 3.71 Å. In the fifth Ca site, Ca is bonded to ten Ca and two equivalent Mg atoms to form distorted CaCa10Mg2 cuboctahedra that share corners with fourteen CaCa8Mg2 cuboctahedra, edges with nine CaCa10Mg2 cuboctahedra, and faces with thirteen CaCa10Mg2 cuboctahedra. Both Ca–Ca bond lengths are 3.82 Å. Both Ca–Mg bond lengths are 3.69 Å. Mg is bonded in a 9-coordinate geometry to nine Ca atoms.

36 MATERIALS SCIENCE↗

Materials Data on CaMg3 by Materials Project

Mg3Ca is beta-derived structured and crystallizes in the hexagonal P-6m2 space group. The structure is three-dimensional. Ca is bonded to six equivalent Ca and six equivalent Mg atoms to form CaCa6Mg6 cuboctahedra that share corners with six equivalent CaCa6Mg6 cuboctahedra, corners with twelve equivalent MgMg12 cuboctahedra, edges with six equivalent CaCa6Mg6 cuboctahedra, edges with twelve equivalent MgCa3Mg9 cuboctahedra, faces with six equivalent CaCa6Mg6 cuboctahedra, and faces with fourteen MgMg12 cuboctahedra. All Ca–Ca bond lengths are 3.41 Å. All Ca–Mg bond lengths are 3.49 Å. There are two inequivalent Mg sites. In the first Mg site, Mg is bonded to twelve Mg atoms to form MgMg12 cuboctahedra that share corners with six equivalent MgMg12 cuboctahedra, corners with twelve equivalent CaCa6Mg6 cuboctahedra, edges with eighteen MgMg12 cuboctahedra, faces with two equivalent CaCa6Mg6 cuboctahedra, and faces with eighteen MgMg12 cuboctahedra. There are six shorter (3.23 Å) and six longer (3.41 Å) Mg–Mg bond lengths. In the second Mg site, Mg is bonded to three equivalent Ca and nine Mg atoms to form MgCa3Mg9 cuboctahedra that share corners with eighteen equivalent MgCa3Mg9 cuboctahedra, edges with six equivalent CaCa6Mg6 cuboctahedra, edges with twelve MgMg12 cuboctahedra, faces with six equivalent CaCa6Mg6 cuboctahedra, and faces with fourteen MgMg12 cuboctahedra. All Mg–Mg bond lengths are 3.41 Å.

36 MATERIALS SCIENCE↗

Materials Data on CaMg2 by Materials Project

Mg2Ca crystallizes in the monoclinic C2/c space group. The structure is three-dimensional. Ca is bonded to two equivalent Ca and ten equivalent Mg atoms to form CaCa2Mg10 cuboctahedra that share corners with six equivalent CaCa2Mg10 cuboctahedra, corners with twelve equivalent MgCa5Mg7 cuboctahedra, edges with eight equivalent MgCa5Mg7 cuboctahedra, edges with ten equivalent CaCa2Mg10 cuboctahedra, faces with four equivalent CaCa2Mg10 cuboctahedra, and faces with sixteen equivalent MgCa5Mg7 cuboctahedra. Both Ca–Ca bond lengths are 3.41 Å. There are a spread of Ca–Mg bond distances ranging from 3.36–3.53 Å. Mg is bonded to five equivalent Ca and seven equivalent Mg atoms to form distorted MgCa5Mg7 cuboctahedra that share corners with six equivalent CaCa2Mg10 cuboctahedra, corners with twelve equivalent MgCa5Mg7 cuboctahedra, edges with four equivalent CaCa2Mg10 cuboctahedra, edges with fourteen equivalent MgCa5Mg7 cuboctahedra, faces with eight equivalent CaCa2Mg10 cuboctahedra, and faces with twelve equivalent MgCa5Mg7 cuboctahedra. There are a spread of Mg–Mg bond distances ranging from 3.38–3.47 Å.

36 MATERIALS SCIENCE↗

Materials Data on CaMg2 by Materials Project

Mg2Ca is Cubic Laves structured and crystallizes in the trigonal R32 space group. The structure is three-dimensional. Ca is bonded in a 12-coordinate geometry to four equivalent Ca and twelve Mg atoms. There are three shorter (3.78 Å) and one longer (3.91 Å) Ca–Ca bond lengths. There are a spread of Ca–Mg bond distances ranging from 3.60–3.73 Å. There are two inequivalent Mg sites. In the first Mg site, Mg is bonded to six equivalent Ca and six equivalent Mg atoms to form a mixture of corner, edge, and face-sharing MgCa6Mg6 cuboctahedra. All Mg–Mg bond lengths are 3.16 Å. In the second Mg site, Mg is bonded to six equivalent Ca and six Mg atoms to form a mixture of corner, edge, and face-sharing MgCa6Mg6 cuboctahedra. All Mg–Mg bond lengths are 3.07 Å.

36 MATERIALS SCIENCE↗

Materials Data on CaMg by Materials Project

MgCa crystallizes in the hexagonal P-6m2 space group. The structure is three-dimensional. Ca is bonded to six equivalent Ca and six equivalent Mg atoms to form a mixture of distorted corner, edge, and face-sharing CaCa6Mg6 cuboctahedra. All Ca–Ca bond lengths are 3.67 Å. All Ca–Mg bond lengths are 3.52 Å. Mg is bonded in a 6-coordinate geometry to six equivalent Ca atoms.

36 MATERIALS SCIENCE↗