SEARCH · Engineering Papers
Results for “CUBIC LATTICES”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Stability of the Nagaoka-type ferromagnetic state in a t 2 g orbital system on a cubic lattice
Not Available
Quantum many-body calculations using body-centered cubic lattices
It is often computationally advantageous to model space as a discrete set of points forming a lattice grid. This technique is particularly useful for computationally difficult problems such as quantum many-body systems. For reasons of simplicity and familiarity, nearly all quantum many-body calculations have been performed on simple cubic lattices. Since the removal of lattice artifacts is often an important concern, it would be useful to perform calculations using more than one lattice geometry. In this paper we show how to perform quantum many-body calculations using auxiliary-field Monte Carlo simulations on a three-dimensional body-centered cubic (BCC) lattice. As a benchmark test we compute the ground state energy of 33 spin-up and 33 spin-down neutrons in the unitary limit, which is an idealized limit where the interaction range is zero and scattering length is infinite. As a fraction of the free Fermi gas energy E FG , we find that the ground state energy is E 0 /E FG =0.369(2),0.371(2), using two different definitions of the finite-system energy ratio. This is in excellent agreement with recent results obtained on a cubic lattice [He et al., Phys. Rev. A 101, 063615 (2020)]. We find that the computational effort and performance on a BCC lattice is approximately the same as that for a cubic lattice with the same number of lattice points. We discuss how the lattice simulations with different geometries can be used to constrain the size of lattice artifacts in simulations of continuum quantum many-body systems.
Phase Transitions in the Antiferromagnetic Heisenberg Model on a Body-Centered Cubic Lattice with Allowance for the Next-Nearest-Neighbor Interactions
Based on the replica exchange Monte Carlo algorithm and histogram analysis of data, the phase transitions in the three-dimensional antiferromagnetic Heisenberg model on a body-centered cubic lattice with allowance for the next-nearest-neighbor interaction are studied. The study is performed for the nextnearest- neighbor exchange interaction ratio of r = 1. It is established that, for this model, the transition from the antiferromagnetic to paramagnetic phase is a first-order phase transition.
Phase transitions in the antiferromagnetic Ising model on a body-centered cubic lattice with interactions between next-to-nearest neighbors
Phase transitions in the antiferromagnetic Ising model on a body-centered cubic lattice are studied on the basis of the replica algorithm by the Monte Carlo method and histogram analysis taking into account the interaction of next-to-nearest neighbors. The phase diagram of the dependence of the critical temperature on the intensity of interaction of the next-to-nearest neighbors is constructed. It is found that a second-order phase transition is realized in this model in the investigated interval of the intensities of interaction of next-to-nearest neighbors.
Relativistic LCAO for the cubic lattice. Striking features of photoemission from liquid-nitrogen-cooled silver bromide Quarterly status report
Relativistic approximation for valence bands in cubic lattices, and photoemission changes of silver bromide during cooling
Ice rule for a ferromagnetic nanosite network on the face-centered cubic lattice
The magnetic properties of an inverse opal-like cobalt-based structure having the symmetry of the face-centered cubic lattice are studied. The magnetization reversal of the structure in a magnetic field applied along the [11̄0] axis is described using a phenomenological model, which uses the ice rule for the local magnetization of nanostructure elements. This description predicts the absence of a long-range magnetic order in two <111> directions that are normal to the magnetic field. The magnetic structure is analyzed by smallangle neutron diffraction. Neutron diffraction patterns are measured in an external magnetic field varying from −1.2 to 1.2 T and applied along the crystallographic [11̄0] direction. A magnetic contribution to the neutron scattering intensity is extracted. It is shown that this contribution is close to zero over the entire applied magnetic field range for all scattering planes that are normal to the field, which agrees well with the proposed model.
Studying Thermodynamic Properties of the Ising Model on a Body-Centered Cubic Lattice with Competing Exchange Interactions
Using the Monte Carlo method, magnetic structures of the ground state and thermodynamic properties of the antiferromagnetic Ising model on a body-centered cubic lattice with competing exchange interactions are studied. The investigations are carried out for the ratio of the exchange interactions of next and nearest neighbors r = J{sub 2}/J{sub 1} = 2/3. All possible magnetic structures of the ground state for this ratio of exchange interactions have been obtained. It has been shown that at r = 2/3 the competition of exchange interactions does not lead to the appearance of frustration and degeneracy of the ground state. Based on the histogram data analysis, it has been shown that the phase transition of the second kind is observed in the model under study at r = 2/3.
Phase Transitions and the Critical Properties of the Heisenberg Model on a Body-Centered Cubic Lattice
The Monte Carlo replica technique is used to study phase transitions and the thermodynamic and critical properties of the three-dimensional Heisenberg antiferromagnetic model on the body-centered cubic lattice with the inclusion of the interaction of the nearest and the next-nearest neighbors. The studies are performed for the proportions of the values of the exchange interactions of the nearest and the next-nearest neighbors in the range of values of k [0.0, 0.6]. The phase transition character is analyzed based on the histogram method. The overall set of static critical indices is calculated in terms of the theory of the finite-dimensional scaling. It is shown that the class of the critical behavior universality of this model is conserved in the above range of values of k.
Interaction of macroparticles localized in Wigner–Seitz cells of various types of cubic lattices in an equilibrium plasma
The interaction of two charged point macroparticles located in Wigner–Seitz cells of simple cubic (SC), body-centered cubic (BCC), or face-centered cubic (FCC) lattices in an equilibrium plasma has been studied within the Debye approximation or, more specifically, based on the linearized Poisson–Boltzmann model. The shape of the outer boundary is shown to exert a strong influence on the pattern of electrostatic interaction between the two macroparticles, which transforms from repulsion at small interparticle distances to attraction as the interparticle distance approaches half the length of the computational cell. The macroparticle pair interaction potential in an equilibrium plasma is shown to be nevertheless the Debye one and purely repulsive for likely charged macroparticles.
Large Amplitude Oscillatory Shear of Block Copolymer Spheres on a Body-Centered Cubic Lattice: Are Micelles Like Metals?
Small-angle X-ray diffraction experiments have uncovered a remarkable mechanism of grain alignment during plastic deformation of ordered sphere-forming diblock copolymer micelles when subjected to large amplitude dynamic shearing. A nearly monodisperse poly(styrene-b-ethylene-alt-propylene) (SEP) diblock copolymer with block molecular weights of 42,000 and 60,000 was mixed with squalane (C{sub 30}H{sub 62}), an EP selective solvent, at a concentration of 10 wt %. After high temperature annealing, the sample formed an ordered polydomain morphology containing glassy S cores at room temperature. SAXS powder patterns confirm body-centered cubic (BCC) symmetry and reveal the development of a complex array of two-dimensionally resolved Bragg reflections following the application, and cessation, of oscillatory shearing. These diffraction results are interpreted on the basis of the classic mechanism of crystalline slip, which accounts for plastic deformation of ductile materials such as metals. Four distinct slip systems are shown to be active in this work, suggesting a robust basis for deforming and mixing of soft ordered solids.
Reversible Nanoparticle Cubic Lattices in Blue Phase Liquid Crystals
Blue phases (BPs), a distinct class of liquid crystals (LCs) with 3D periodic ordering of double twist cylinders involving orthogonal helical director twists, have been theoretically studied as potential templates for tunable colloidal crystals. Here, we report the spontaneous formation of thermally reversible, cubic crystal nanoparticle (NP) assemblies in BPs. Gold NPs, functionalized to be highly miscible in cyanobiphenyl-based LCs, were dispersed in BP mixtures and characterized by polarized optical microscopy and synchrotron small-angle X-ray scattering (SAXS). The NPs assemble by selectively migrating to periodic strong trapping sites in the BP disclination lines. The NP lattice, remarkably robust given the small particle size (4.5 nm diameter), is commensurate with that of the BP matrix. At the BP I to BP II phase transition, the NP lattice reversibly switches between two different cubic structures. The simultaneous presence of two different symmetries in a single material presents an interesting opportunity to develop novel dynamic optical materials.
S U ( 2 ) principal chiral model with tensor renormalization group on a cubic lattice
We study the continuous phase transition and thermodynamic observables in the three-dimensional Euclidean S U ( 2 ) principal chiral field model with the triad tensor renormalization group and the anisotropic tensor renormalization group methods. Using these methods, we find results that are consistent with previous Monte Carlo estimates and the predicted renormalization group scaling of the magnetization close to criticality. These results bring us one step closer to studying finite-density quantum chromodynamics in four dimensions using tensor network methods. Published by the American Physical Society 2024
Calculation of body-centered-cubic lattice sums with an application to ferromagnetism.
The lattice sums for the bcc lattice are recalculated using the method of Flax and Raich to obtain more general expressions, valid for all temperatures, in terms of a Langevin function and its derivatives. Formulas are presented which enable easy numerical evaluation. A comparison with well-known low-temperature expansions and with the results of direct numerical integration demonstrates the validity at low temperatures of the more general expressions calculated here.
Lattice distortions and oxygen vacancies produced in Au+-irradiated nanocrystalline cubic zirconia
The oxygen ion conductivity, attributed to an oxygen vacancy mechanism, of yttria-stabilized zirconia membranes used in solid oxide fuel cells is restricted due to trapping limitations. In this work, a high concentration of oxygen vacancies has been deliberately introduced into nanocrystalline stabilizer-free zirconia through ion-irradiation. Oxygen vacancies with different charge states can be produced by varying irradiation temperatures. Due to the reduced trapping sites and high oxygen vacancy concentration, this work suggests that the efficiency of solid oxide fuel cells can be improved.
Band offsets for mismatched interfaces: The special case of ZnO on CdTe (001)
High-quality planar interfaces between ZnO and CdTe would be useful in optoelectronic applications. Although CdTe is zinc blende with cubic lattice constant a = 6.482 Å while ZnO is hexagonal wurtzite with a = 3.253 Å and c = 5.213 Å, (001)-oriented cubic zinc blende ZnO films could be stabilized epitaxially on a CdTe (001) surface in an √2 × √2 R45° configuration with a lattice mismatch of <0.5%. Modeling such a configuration allows density-functional total-energy electronic-structure calculations to be performed on several interface arrangements (varying terminations and in-plane fractional translations) to identify the most likely form of the interface, and to predict valence-band offsets between CdTe and ZnO in each case. Growth of ZnO on Te-terminated CdTe(001) is predicted to produce small or even negative (CdTe below ZnO) valence band offsets, resulting in a Type I band alignment. Growth on Cd-terminated CdTe is predicted to produce large positive offsets for a Type II alignment as needed, for example, in solar cells. To corroborate some of these predictions, thin layers of ZnO were deposited on CdTe(001) by pulsed laser deposition, and the band alignments of the resulting heterojunctions were determined from x-ray photoelectron spectroscopy measurements. Although zinc blende ZnO could not be confirmed, the measured valence band offset (2.0–2.2 eV) matched well with the predicted value.
Barium titanate nanoparticles: Short-range lattice distortions with long-range cubic order
Barium titanate (BTO) nanoparticles (sizes 10 to 500 nm) exhibit a displacement of the Ti atom from the center of the Perovskite unit cell as inferred from synchrotron X-ray diffraction patterns (XRD) analyzed using atomic pair distribution functions (PDFs). Fits to PDFs acquired at temperatures of 20° to 220°C indicate that these Ti displacements (~ 0.1 Å) are comparable to or even greater than those in the bulk material. Moreover, these displacements persist at temperatures well above 120°C where the tetragonal to pseudo-cubic phase transition occurs in the bulk. Tetragonal Raman spectral lines were observed for all sizes of these BTO nanoparticles and confirm a distorted unit cell up to 120°C. Above 120°C, the small BTO nanoparticles (10, 50, 100 nm) continue to display tetragonal Raman lines, though with slowly decreasing amplitudes as the temperature rises. In contrast, the tetragonal Raman lines of large BTO nanoparticles (300, 400, 500 nm) disappear abruptly above 120°C, suggestive of bulk material. Indeed, fits to large-particle X-ray PDFs over the range 20-60 Å reveal a sharp, long-range structural change toward a cubic lattice at 120°C, again consistent with bulk material. This sharp, long-range structural change is absent in the small particles. In fact, laboratory XRD Bragg peak profiles for the small BTO particles appear to be singlets at 20°C, indicating that significant long-range cubic order already exists at room temperature. As temperature rises, this long-range cubic order is gradually reinforced as inferred from long-range fits of the small particle PDFs. By combining information from X-ray PDFs, Raman spectra, and Bragg peak profiles, we conclude that small BTO nanoparticles exhibit both short-range (unit-cell) distortion and long-range (mesoscale) cubic order from 20° to 220°C, while the large nanoparticles behave as bulk material, differing from small particles only by exhibiting long-range tetragonal order below 120°C and a mesoscale structural phase change at 120°C.
Excited state baryon spectroscopy from lattice QCD
Here, we present a calculation of the Nucleon and Delta excited state spectrum on dynamical anisotropic clover lattices. A method for operator construction is introduced that allows for the reliable identification of the continuum spins of baryon states, overcoming the reduced symmetry of the cubic lattice. Using this method, we are able to determine a spectrum of single-particle states for spins up to and including $J = 7/2$, of both parities, the first time this has been achieved in a lattice calculation. We find a spectrum of states identifiable as admixtures of $SU(6) Ⓧ O(3)$ representations and a counting of levels that is consistent with the non-relativistic $qqq$ constituent quark model. This dense spectrum is incompatible with quark-diquark model solutions to the "missing resonance problem" and shows no signs of parity doubling of states.