Influence of coercive force on low-frequency creep in Bloch-wall Permalloy films
Bloch-wall Permalloy films coercive force effects on low frequency creep, using high resolution Bitter pattern observation technique
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Bloch-wall Permalloy films coercive force effects on low frequency creep, using high resolution Bitter pattern observation technique
Phenomenological model aids in understanding the mechanisms responsible for the easy-axis coercive force in thin magnetic films of NiFe, MnBi, and gadolinium iron garnet.
A coherent magnetochemical picture of lunar samples is presented which was determined from a synthesis of available magnetic-property data and corresponding chemical and petrographic data for soils and rock samples collected at the Apollo landing sites. The magnetic properties of the samples are correlated with Al/Si ratio as well as with telescope spectral reflectivity curves, and magnetochemical diagrams based on composition-sensitive magnetic parameters describing the Fe metal and Fe(2+) contents are used to classify the samples. It is shown that the relative metal-fraction size distribution and magnetic stability for different rock types and soils of varying Al/Si values are reflected in a plot of the ratio of saturation isothermal remanence to saturation magnetization vs the ratio of remanent coercive force to coercive force. It is concluded that all the Apollo landing sites have distinct telescope curves correlated with petrology, chemistry, Al/Si values, and magnetic properties. The established correlations suggest the possibility of estimating the magnetic properties of the regolith from remote-sensing observations.
Lunar samples have reduced coercive force, high values of R sub H (ratio of remanent coercive force to coercive force), and constriction in their magnetic hysteresis loops due to the presence of superparamagnetic and multidomain iron grains. The high R sub H values are also attributable to the magnetic shape effects of the iron grains. Spheres, cubes, and needles, as well as more irregular metal grains were observed. The coercive force values are quite meaningless unless the size and shape distributions are determined. The R sub H and the ratio of saturation remanence to saturation magnetization values can be considered characteristic of the size and shape modes of the ferromagnetic grains in a natural sample, and a classification of natural materials based on their hysteresis characteristics is presented with special reference to lunar samples.
Magnetic hysteresis loops and the derived hysteresis ratios R sub H and R sub I are used to classify the various natural dilute magnetic materials. R sub I is the ratio of saturation isothermal remanence (I sub R) to saturation (I sub S) magnetization, and R sub H is the ratio of remanent coercive force (H sub R) to coercive force (H sub C). The R sub H and R sub I values depend on grain size, the characteristics of separate size modes in mixtures of grains of high and low coercivity, and the packing characteristics. Both R sub H and R sub I are affected by thermochemical alterations of the ferromagnetic fraction. Hysteresis loop constriction is observed in lunar samples, chondrite meteorites, and thermochemically altered basaltic rocks, and is due to mixtures of components of high and low coercivity. Discrete ranges of R sub H and R sub I for terrestrial and lunar samples and for chondrite meteorites provide for a classification of these natural materials based on their hysteresis properties.
Extra terrestrial materials, certain materials which have their origin at the earth's surface due to meteoritic impact, or under highly reducing conditions, such as in the case of basaltic flows in contact with coal beds or serpentenites, all contain Fe and FeNi phases with high magnetization values and spherical shape. Normally, the demagnetizing field (H sub D = NI sub S: where N is the demagnetizing factor and I is the saturation magnetization) is corrected for. In disperse systems, such as most natural materials, the particle shape effects are analyzed in terms of the saturation fields, Hs = H sub D = NI sub S and the magnetization differences (Delta I sub S). Discrete size modes of superparamagnetic (SP), multidomain (MD), and single domain (SD) particles result in reduced coercive force (Hc), increase in the value R sub H (ratio of remanent coercive force, H sub R, to H sub C), and decrease in the value R sub I (ratio of remanent magnetization, I sub R, to saturation magnetization, T sub S). The main distinctions between the various natural materials can be made by this approach. Hysteresis loops for terrestrial basalts, Fe and Ni rods and spheres, chondrite meteorites, lunar samples, impactites, and chondritic fusion crust are presented.
Ferromagnetic oxide coatings were formed on aluminum alloy by the plasma-electrolytic oxidation technique in an electrolyte with colloidal particles of iron and cobalt hydroxides. Iron and cobalt are concentrated in the coating pores as a part of nanosized crystallites. The size of individual crystallites in the pores was ∼50–100 nm. The deficit of oxygen to form oxides in crystallites shows that the metals in the crystallites are predominantly in a reduced state. It is also possible that the metal or oxide nuclei are surrounded by oxide-hydroxide shells. The coatings obtained within 5 min have a high coercive force H{sub c} = 1300 Oe. A theoretical analysis of the magnetic properties of Fe-, Co-containing coatings has been performed using the model of clusters consisting of magnetostatically interacting particles. The theoretical value of the saturation magnetization and the experimental values of the coercive force can be explained with the presence of two phases in the nanoparticles: a large antiferromagnetic or ferromagnetic (hydroxides and/or oxides of iron and cobalt) and a small superparamagnetic (iron, cobalt, magnetite, maghemite).
Large-scale cauliflower-like Fe{sub 3}O{sub 4} architectures consist of well-assembled magnetite nanocrystal clusters have been synthesized by a simple solvothermal process. The as-synthesized Fe{sub 3}O{sub 4} samples were characterized by XRD, XPS, FT-IR, SEM, TEM, etc. The results show that the samples exhibit cauliflower-like hierarchical microstructures. The influences of synthesis parameters on the morphology of the samples were experimentally investigated. Magnetic properties of the Fe{sub 3}O{sub 4} cauliflower-like hierarchical microstructures have been detected by VSM at room temperature, showing a relatively low saturation magnetization of 65 emu/g and an enhanced coercive force of 247 Oe. - Graphical Abstract: Cauliflower-like Fe{sub 3}O{sub 4} architectures consist of well-assembled magnetite nanocrystal clusters have been synthesized by a simple solvothermal process, using FeCl{sub 3}.6H{sub 2}O and EDA as the starting materials. Highlights: > Cauliflower-like Fe{sub 3}O{sub 4} architectures were successfully prepared by a simple solvothermal route. > The cauliflower-like Fe{sub 3}O{sub 4} architectures have a size in the range of 200-300 nm. > They show a low saturation magnetization of 65 emu/g and an enhanced coercive force of 247 Oe. > These Fe{sub 3}O{sub 4} architectures may have potential applications in catalysis and biological fields.
Effect of inter-grain exchange interaction on the coercive forces was analyzed with a numerical simulation in magnetic materials with random magnetic anisotropy. The magnetization of an assembly of magnetically interacting grains with randomly oriented uniaxial anisotropy was calculated using the Landau-Lifshitz-Gilbert equation. We supposed a single spin model where the magnetizations in a grain were aligned in the same direction, for simplicity. Calculations were carried out for an N×N×N system, where the number of grains on a side, N ranged from 16 to 128. The relation between the coercive forces H{sub C} and the grain size D is represented by H{sub C}∝D{sup k}. With the increase of N, k decreased gradually and tended to reach a saturated value around k = 4.5–5, which dose not correspond to the primitive theory of the random anisotropy model where k = 6. The deviation was discussed in terms of the inter-grain interaction, essentially proportional to the inverse of D.
High coercive-force films have reduced sensitivity to wall-domain motion and can record at higher spatial frequencies. Tracks switched in high coercive-force films have track widths independent of applied magnetic field. Upper spatial frequency limit recorded by Curie-point switching in alternating field is greater.
Nanowires (NWs) consisting of Ni/Cu and Co/Cu alternating layers with a diameter of 100 nm and layer thicknesses varying between 10 and 500 nm are prepared by template synthesis in pores of polymer track-etched membranes. Bath compositions and different regimes for pulsed electrodeposition of NWs are explored. A procedure for electrodeposition of NWs using pulses of equal charge is developed. By diminishing the amount of charge per pulse, initially we manage to lower the layer thickness to 10–15 nm, but further diminishing of charge in pulses leads to the blending of elemental composition of adjacent layers and/or formation of rod–shell nanostructures within the NWs. The coercive force (15–30 mT) and residual magnetization of our layered NWs are determined from magnetization measurements. For NWs with a layer thickness of 50–100 nm, the magnetization curves recorded in the out-of-plane and in-plane geometries are similar in shape and have similar parameters. For NWs with thicker layers (250 and 500 nm), magnetization curves are markedly different due to magnetic anisotropy (an easy magnetization axis emerges longitudinally to NWs) and interference between neighboring NWs. Magnetic force microscopy of isolated NWs identifies that the NWs comprise magnetic regions extending over ~100–150 nm. The NW can be partially remagnetized by applying an external magnetic field (+16 mT) longitudinally.
The effect of ion irradiation on magnetic properties of films of the ferromagnetic CoPt alloy fabricated by electron-beam evaporation has been studied. It is found that the coercive force decreases and the lateral component of the easy-magnetization axis increases as the He{sup +} ion fluence increases from 1 × 10{sup 13} to 1 × 10{sup 16} cm{sup –2}. It is shown by magnetic-force microscopy and the Mandelstam–Brillouin spectroscopy that the formation of isolated circle domains which are magnetic skirmions in the CoPt layer is activated at certain ion-irradiation fluence (3 × 10{sup 14} cm{sup –2}).
The possibility of controlling the magnetic properties of multilayered periodical structures with perpendicular magnetic anisotropy, which are based on cobalt and platinum films, have been studied. The multilayered films composed by layers with a thickness of 0.5–1.0 nm were subjected to two types of actions: vacuum annealing at different temperatures and irradiation by helium ion beams. Transmission electron microscopy has shown that the irradiation by He{sup +} ions with energy of 30 keV leads to material mixing in the layers since at vacuum annealing the layered structure of films is kept. In this case, as a result of thermal annealing, the coercive force of the structure increases significantly, and upon irradiation with helium ions, the coercivity of the films decreases to a change in the type of anisotropy from perpendicular to “easy plane” anisotropy.
This paper examines the effect of calcination process on the structural and magnetic properties material nanostructure composite of Ni{sub 0Ð}œ‡{sub 5}Zn{sub 0Ð}œ‡{sub 25}Cu{sub 0.25} Fe{sub 2}O{sub 4} ferrites. The samples were successfully prepared by sol-gel method at different calcination temperature, which are 600°C, 700°C, 800°C and 900°C. Morphological investigation, average crystallite size and microstructure of the material were examined by using X-ray diffraction (XRD) and confirmed by high resolution transmission electron microscope (HRTEM) and field emission scanning electron microscope (FESEM). The effects of calcination temperature on the magnetic properties were calculated by using vibrating sample magnetometer (VSM). The XRD result shows single-phase cubic spinel structure with interval average size 5.9-38 nm, and grain size microstructure of the material was increasing with temperature increases. The highest magnetization saturation was reached at a temperature 800°C with value 53.89 emu/g, and the value coercive force (Hc) was inversely with the grain size.
We optimized the alloy compositions by modifying the Nb content in [(Fe{sub 0.5}Co{sub 0.5}){sub 0.75}B{sub 0.20}Si{sub 0.05}]{sub 100-x}Nb{sub x}(x=3.6-4.4) alloy system. As a result, it was found that the Nb content of 4.3 at. % was effective for approaching alloy to a eutectic point. By copper mold casting, [(Fe{sub 0.5}Co{sub 0.5}){sub 0.75}B{sub 0.20}Si{sub 0.05}]{sub 95.7}Nb{sub 4.3} bulk glassy alloy rods with diameters up to 4 mm were successfully synthesized even using commercial raw materials. These glassy alloys exhibit a rather high saturation magnetization of 0.77 T and low coercive force of 2.5 A/m.
Highlights: {yields} Single-phase Sr{sub 3}Co{sub 2}Z was obtained in a very narrow temperature range. {yields} Sr{sub 3}Co{sub 2}Z ferrite prepared by polymerizable complex method showed typical M-H curve of soft ferrite. -- Abstract: Synthesis of single-phase Sr{sub 3}Co{sub 2}Fe{sub 24}O{sub 41} Z-type (Sr{sub 3}Co{sub 2}Z) ferrite was realized by adopting the polymerizable complex method. Crystal structure of samples has been investigated by powder X-ray diffraction (XRD). Single-phase Sr{sub 3}Co{sub 2}Z ferrite was obtained by heating at 1473 K for 5 h in air. Magnetic properties were discussed by measurements of M-H curves with vibrating sample magnetometer (VSM). Sr{sub 3}Co{sub 2}Z ferrite prepared by polymerizable complex method showed typical M-H curve of soft ferrite, with a saturation magnetization of 21.5{mu}{sub B}/formula unit (50.5 emu/g) and a coercive force of 0.014 T at room temperature.
The hysteresis loops and the micromagnetic structure of a ferromagnetic nanolayer with a randomly oriented local easy magnetization axis and two-dimensional magnetization correlations are studied using a micromagnetic simulation. The properties and the micromagnetic structure of the nanolayer are determined by the competition between the anisotropy and exchange energies and by the dipole–dipole interaction energy. The magnetic microstructure can be described as an ensemble of stochastic magnetic domains and topological magnetization defects. Dipole–dipole interaction suppresses the formation of topological magnetization defects. The topological defects in the magnetic microstructure can cause a sharper change in the coercive force with the crystallite size than that predicted by the random magnetic anisotropy model.
Nanoparticles of the Fe–Co–Ni ternary alloy, encapsulated in the carbon matrix of nanocomposites, have been synthesized, The structure, phase composition, and magnetic properties of the obtained materials have been determined with the help of diffractometry and magnetometry. It has been established that nanoparticles of the ternary alloy are formed due to solution of cobalt in the Fe–Ni alloy. The composition of the nanoparticles of the alloy depends on the mass percent ratio of the metas in the precursor. With growth of the iron content, nanoparticles of the ternary alloy with various composition are formed with FCC and BCC crystal lattice structure. As the synthesis temperature and relative iron content are increased, the magnetization of the Fe–Co–Ni/C nanocomposites increases from 26 to 157 A·m{sup 2}/kg. The coercive force is determined by the synthesis temperature, the size of the nanoparticles, and the composition of the alloy, and its value varies from 330 to 43 Oe.