Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CLOUD GLACIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

An Investigation of Glaciated Cloud Capabilities in the NASA Glenn Icing Research Tunnel

In 2015 the FAA added Appendix D to Part 33 engine certification requirements that included Mixed Phase and Ice Crystal Icing to aircraft engine certification. Replicating the ice crystal environment that is seen in nature has proven to be a challenge, which multiple engine ground testing facilities and icing wind tunnels have achieved to varying degrees. The Icing Research Tunnel (IRT) at NASA Glenn has always been focused on super-cooled liquid water to produce FAA Part 23 and Part 25 regulations, targeting Appendix C and lately also Appendix O. However, due to a growing interest in the field of ice crystals and the high cost of operating engine icing facilities, the IRT staff have recently completed testing using the Multi-Element Sensor (also known as the multi-wire) to measure glaciated cloud conditions. Results indicate that turning off the heat to the nozzle air and water supply can create a stable, fully glaciated cloud in the test section for a small range of conditions: drop-size distribution values below 20 microns (median volumetric diameter), air temperatures as warm as -7 deg C, and airspeeds between 100 and 250 knots. These tests also revealed how varying the total temperature, airspeed, nozzle air pressure, and nozzle water pressure affect the glaciation of the IRT cloud.

ice water content↗
DOE OSTI2024

Glaciation of mixed-phase clouds: insights from bulk model and bin-microphysics large-eddy simulation informed by laboratory experiment

Abstract. Mixed-phase clouds affect precipitation and radiation differently from liquid and ice clouds, posing greater challenges to their representation in numerical simulations. Recent laboratory experiments using the Pi Cloud Chamber explored cloud glaciation conditions based on increased injection of ice-nucleating particles. In this study, we use two approaches to reproduce the results of the laboratory experiments: a bulk scalar mixing model and large-eddy simulation (LES) with bin microphysics. The first approach assumes a well-mixed domain to provide an efficient assessment of the mean cloud properties for a wide range of conditions. The second approach resolves the energy-carrying turbulence, the particle size distribution, and their spatial distribution to provide more details. These modeling approaches enable a separate and detailed examination of liquid and ice properties, which is challenging in the laboratory. Both approaches demonstrate that, with an increased ice number concentration, the flow and microphysical properties exhibit the same changes in trends. Additionally, both approaches show that the ice integral radius reaches the theoretical glaciation threshold when the cloud is subsaturated with respect to liquid water. The main difference between the results of the two approaches is that the bulk model allows for the complete glaciation of the cloud. However, LES reveals that, in a dynamic system, the cloud is not completely glaciated as liquid water droplets are continuously produced near the warm lower boundary and subsequently mixed into the chamber interior. These results highlight the importance of the ice mass fraction in distinguishing the mixed-phase clouds and ice clouds.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2016

The Relationships Between Insoluble Precipitation Residues, Clouds, and Precipitation Over California's Southern Sierra Nevada During Winter Storms

Ice formation in orographic mixed-phase clouds can enhance precipitation and depends on the type of aerosols that serve as ice nucleating particles (INP). The resulting precipitation from these clouds is a viable source of water, especially for regions such as the California Sierra Nevada. Thus, a better understanding of the sources of INP that impact orographic clouds is important for assessing water availability in California. This study presents a multi-site, multi-year analysis of single particle insoluble residues in precipitation samples that likely influenced cloud ice and precipitation formation above Yosemite National Park. Dust and biological particles represented the dominant fraction of the residues (64% on average). Cloud glaciation, determined using GOES satellite observations, not only depended on high cloud tops (greater than 6.2 km) and low temperatures (less than -26 C), but also on the composition of the dust and biological residues. The greatest prevalence of ice-phase clouds occurred in conjunction with biologically-rich residues and mineral dust rich in calcium, followed by iron and aluminosilicates. Dust and biological particles are known to be efficient INP, thus these residues are what likely influenced ice formation in clouds above the sites and subsequent precipitation quantities reaching the surface during events with similar meteorology. The goal of this study is to use precipitation chemistry information to gain a better understanding of the potential sources of INP in the south-central Sierra Nevada, where cloud-aerosol-precipitation interactions are under-studied and where mixed-phase orographic clouds represent a key element in the generation of precipitation and thus the water supply in California.

Creamean, Jessie M.↗
NASA NTRS2011

Observational Evidence of Aerosol Enhancement of Lightning Activity and Convective Invigoration

Lightning activity over the West Pacific Ocean east of the Philippines is usually much less frequent than over the nearby maritime continents. However, in 2005 the Lightning Imaging Sensor (LIS) aboard the TRMM satellite observed anomalously high lightning activity in that area. In the same year the Moderate resolution Imaging Spectroradiometer (MODIS) measured anomalously high aerosol loading. The high aerosol loading was traced to volcanic activity, and not to any factor linked to meteorology, disentangling the usual convolution between aerosols and meteorology. We show that in general lightning activity is tightly correlated with aerosol loadings at both inter-annual and biweekly time scales. We estimate that a approximately 60% increase in aerosol loading leads to more than 150% increase in lightning flashes. Aerosols increase lightning activity through modification of cloud microphysics. Cloud ice particle sizes are reduced and cloud glaciation is delayed to colder temperature when aerosol loading is increased. TRMM precipitation radar measurements indicate that anomalously high aerosol loading is associated with enhanced cloud mixed phase activity and invigorated convection over the maritime ocean. These observed associations between aerosols, cloud microphysics, morphology and lightning activity are not related to meteorological variables or ENSO events. The results have important implications for understanding the variability of lightning and resulting aerosol-chemistry interactions.

Yuan, Tianle↗
NASA NTRS2020

The Role of Composition and Surface Area Variability in Ice Nucleation, and How to Get Rid of It

Ice nucleation active site densities and nucleation rates are commonly determined by measuring the fraction of droplets that freeze at different temperatures. In analysing these experiments it is commonly assumed that variability in the immersed particle surface area and composition within a sample can be neglected, allowing a simple parameterization of ice nucleation efficiencies. Here it is shown that these approximations may result in large error, and translate into a bias in estimated active site densities of about six orders of magnitude. When applied in cloud models it may represent up to 5 K error in cloud glaciation temperature. A solution to this enduring problem is proposed for the first time. It is shown that by performing droplet freezing experiments varying mean particle surface area along with the temperature such a bias can be quantitatively removed. This amounts to differentiating the "freezing rate'' from the ice nucleation coefficient, or, the apparent and the actual active site density of a material. The proposed method will contribute to reduce existing uncertainties in the relative strength of the ice nucleation ability of different aerosol species, and the modeling of mixed-phase clouds.

Barahona, Donifan↗
DOE OSTI2024

Fragmentation in Collisions of Snow with Graupel/Hail: New Formulation from Field Observations

Abstract Secondary ice production (SIP) has been attributed to the generation of most ice particles observed in precipitating clouds with cloud tops warmer than −36°C, from various aircraft- and ground-based field observations across the globe. One of the known SIP mechanisms is fragmentation during collisions among ice particles. It has been studied with our theoretical formulation, which has been applied in microphysical schemes of atmospheric models in a few studies. These have predicted an extensive impact on cloud glaciation and radiative properties. However, there has been a lack of experimental field studies, especially involving naturally falling snowflakes, to better understand this particular mechanism of SIP. This study reports the first field measurements with modern technology for fragmentation during collisions between naturally falling snowflakes and graupel/hail particles. This was observed with an innovatively designed portable chamber that was deployed outdoors in northern Sweden. Applying the observations from this field-based study, we optimized the existing formulation for predicting numbers of fragments from collisions of snow with graupel/hail. The observations show the average numbers of fragments per collision for dendritic (3–12 mm) and nondendritic (1–3 mm) snow were about 12 and 1, respectively. This represents a boost of predicted fragment numbers relative to our original formulation published in 2017. The updated formulation for breakup in ice–ice collisions can be implemented in the microphysical schemes of atmospheric models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Global Simulations Suggest Biomass Burning Aerosol Emissions From Grassland Fires Could Be Important Ice Nucleating Particles

Ice nucleating particles (INP) capable of nucleating ice crystals via immersion freezing at temperatures above approximately −35°C may strongly influence cloud glaciation, with implications for global precipitation and climate feedback. In addition to mineral dust, soil dust, and marine organics, laboratory and field measurements suggest biomass burning aerosols (BBA) can act as immersion-mode INP between around −30°C and −15°C. However, the contribution of BBA to the global INP budget remains poorly understood due to poor knowledge of which fuels yield INPs, uncertainties in global coverage of those fuels, and unknown size distributions of the INPs in the BBA. Nonetheless, with some understanding of these uncertainties from sensitivity studies, the relative importance of ice nucleation activity of BBA compared to other INP sources can be quantified. In this work, we investigate the potential global importance of BBA as INP using a global aerosol-climate model, specifically the UK Met Office Unified Model (UM). We evaluate the model using field campaign data sets. We examine potential uncertainties in fuel types and particle sizes on BBA-based INP concentrations. Averaged over June–September between 15°S and 50°S, BBA is a more important INP than dust and marine INP about 30% of the time at altitudes with temperatures between −30°C and −20°C. Our simulations therefore suggest BBA INPs may be at least as important as mineral dust and marine INP over the atmospheric regions and seasons where grassland fires are frequent.

Gohil, Kanishk [Carnegie Mellon University, Pittsb↗
DOE OSTI2024

Glaciation of liquid clouds, snowfall, and reduced cloud cover at industrial aerosol hot spots

The ability of anthropogenic aerosols to freeze supercooled cloud droplets remains debated. Here, in this work, we present observational evidence for the glaciation of supercooled liquid-water clouds at industrial aerosol hot spots at temperatures between -10° and -24°C. Compared with the nearby liquid-water clouds, shortwave reflectance was reduced by 14% and longwave radiance was increased by 4% in the glaciation-affected regions. There was an 8% reduction in cloud cover and an 18% reduction in cloud optical thickness. Additionally, daily glaciation-induced snowfall accumulations reached 15 millimeters. Glaciation events downwind of industrial aerosol hot spots indicate that anthropogenic aerosols likely serve as ice-nucleating particles. However, rare glaciation events downwind of nuclear power plants indicate that factors other than aerosol emissions may also play a role in the observed glaciation events.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1990

The 27-28 October 1986 FIRE IFO cirrus case study - A five lidar overview of cloud structure and evolution

During the case study from the First ISCCP (International Satellite Cloud Climatology Program) Regional Experiment (FIRE) Intensive Field Observation (IFO), one airborne lidar system and four ground-based systems collected linear depolarization, intrinsically calibrated backscatter, and Doppler velocity information. Data presented describe the temporal evolution and spatial distribution of cirrus clouds over an area encompassing southern and central Wisconsin. Cirrus cloud types include dissipating subvisual and thin fibrous cirrus cloud bands, an isolated mesoscale uncinus complex, a large-scale, deep cloud that developed into an organized cirrus structure within the lidar array, and a series of intensifying mesoscale cirrus cloud masses. It is noted that the cirrus frequently developed in the vertical from particle fallstreaks emanating from generating regions at or near cloud tops; however, glaciating supercooled altocumulus clouds contributed to the production of ice mass at the base of the deep cirrus cloud.

Sassen, Kenneth↗
NASA NTRS2013

A Cross-Track Cloud-Scanning Dual-Frequency Doppler (C2D2) Radar for the Proposed ACE Mission and Beyond

The National Resource Council’s Earth Science Decadal Survey” (NRCDS) has identified the Aerosol/Climate/Ecosystems (ACE) Mission as a priority mission for NASA Earth science. The NRC recommended the inclusion of "a cross-track scanning cloud radar with channels at 94 GHz and possibly 34 GHz for measurement of cloud droplet size, glaciation height, and cloud height". Several radar concepts have been proposed that meet some of the requirements of the proposed ACE mission but none have provided scanning capability at both 34 and 94 GHz due to the challenge of constructing scanning antennas at 94 GHz. In this paper, we will describe a radar design that leverages new developments in microwave monolithic integrated circuits (MMICs) and micro-machining to enable an electronically-scanned radar with both Ka-band (35 GHz) and W-band (94-GHz) channels. This system uses a dual-frequency linear active electronically-steered array (AESA) combined with a parabolic cylindrical reflector. This configuration provides a large aperture (3m x 5m) with electronic-steering but is much simpler than a two-dimension AESA of similar size. Still, the W-band frequency requires element spacing of approximately 2.5 mm, presenting significant challenges for signal routing and incorporation of MMICs. By combining (Gallium Nitride) GaN MMIC technology with micro-machined radiators and interconnects and silicon-germanium (SiGe) beamforming MMICs, we are able to meet all the performance and packaging requirements of the linear array feed and enable simultaneous scanning of Ka-band and W-band radars over swath of up to 100 km.

Aerosol/Climate/Ecosystems (ACE) Mission↗
NASA NTRS1990

Lidar cloud studies for FIRE and ECLIPS

Optical remote sensing measurements of cirrus cloud properties were collected by one airborne and four ground-based lidar systems over a 32 h period during this case study from the First ISCCP (International Satellite Cloud Climatology Program) Regional Experiment (FIRE) Intensive Field Observation (IFO) program. The lidar systems were variously equipped to collect linear depolarization, intrinsically calibrated backscatter, and Doppler velocity information. Data presented describe the temporal evolution and spatial distribution of cirrus clouds over an area encompassing southern and central Wisconsin. The cirrus cloud types include: dissipating subvisual and thin fibrous cirrus cloud bands, an isolated mesoscale uncinus complex (MUC), a large-scale deep cloud that developed into an organized cirrus structure within the lidar array, and a series of intensifying mesoscale cirrus cloud masses. Although the cirrus frequently developed in the vertical from particle fall-streaks emanating from generating regions at or near cloud tops, glaciating supercooled (-30 to -35 C) altocumulus clouds contributed to the production of ice mass at the base of the deep cirrus cloud, apparently even through riming, and other mechanisms involving evaporation, wave motions, and radiative effects are indicated. The generating regions ranged in scale from approximately 1.0 km cirrus uncinus cells, to organized MUC structures up to approximately 120 km across.

Sassen, Kenneth↗
NASA NTRS2010

Estimating Glaciation Temperature of Deep Convective Clouds with Remote Sensing Data

Major uncertainties exist for observing and modeling ice content inside deep convective clouds (DCC). One of the difficulties has been the lack of characterization of vertical profiles of cloud hydrometeor phase. Here we propose a technique to estimate the DCC glaciation temperature using passive remote sensing data. It is based on a conceptual model of vertical hydrometeor size profiles inside DCCs. Estimates from the technique agree well with our general understanding of the problem. Furthermore, the link between vertical profiles of cloud particle size and hydrometeor thermodynamic phase is confirmed by a 3-13 cloud retrieval technique. The technique is applied to aircraft measurements of cloud side reflectance and the result was compared favorably with an independent retrieval of thermodynamic phase based on different refractive indices at 2.13 micron and 2.25 micron. Possible applications of the technique are discussed.

Yuan, Tianle↗
DOE OSTI2025

An Improved Convection Parameterization with Detailed Aerosol–Cloud Microphysics for a Global Model

Abstract A new microphysical treatment that includes aerosol–cloud interactions and secondary ice production (SIP) mechanisms is implemented in the convection scheme of the Community Atmosphere Model, version 6 (CAM6). The approach is to embed a 1D Lagrangian parcel model in the bulk convective plume of the existing deep convection parameterization. Aerosol activation, growth processes including collision/coalescence, and three processes of SIP mechanisms, two of which are normally overlooked in atmospheric models, are represented in this embedded parcel model. These microphysical processes are treated with a hybrid bin/bulk scheme and a high spatial and temporal resolution for the integration of the embedded parcel in 1D, allowing vertical velocity to determine the microphysical evolution following the in-cloud motion during ascent. Simulations of an observed case (Midlatitude Continental Convective Clouds Experiment) of a mesoscale convective system in Oklahoma, United States, with a single-column model (SCAM) version of CAM, are compared with aircraft in situ and ground-based observations of microphysical properties from the convection and precipitation. Results from the validation show the new microphysical scheme has a good representation of the ice initiation in the bulk convective plume, including the known and empirically quantified pathways of primary and secondary initiation, with benefits for the accuracy of properties of its supercooled cloud liquid. The sensitivity simulations and use of tagging tracers for the validated simulation confirm that the newly included SIP mechanisms are of paramount importance for convective microphysics and can be successfully treated in the global model.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2017

An Initial Study of the Fundamentals of Ice Crystal Icing Physics in the NASA Propulsion Systems Laboratory

This presentation shows results from an initial study of the fundamental physics of ice-crystal ice accretion using the NASA Propulsion Systems Lab (PSL). Ice accretion due to the ingestion of ice-crystals is being attributed to numerous jet-engine power-loss events. The NASA PSL is an altitude jet-engine test facility which has recently added a capability to inject ice particles into the flow. NASA is evaluating whether this facility, in addition to full-engine and motor-driven-rig tests, can be used for more fundamental ice-accretion studies that simulate the different mixed-phase icing conditions along the core flow passage of a turbo-fan engine compressor. The data from such fundamental accretion tests will be used to help develop and validate models of the accretion process. The present study utilized a NACA0012 airfoil. The mixed-phase conditions were generated by partially freezing the liquid-water droplets ejected from the spray bars. This presentation shows data regarding (1) the freeze out characteristics of the cloud, (2) changes in aerothermal conditions due to the presence of the cloud, and (3) the ice accretion characteristics observed on the airfoil model. The primary variable in this test was the PSL plenum humidity which was systematically varied for two duct-exit-plane velocities (85 and 135 ms) as well as two particle size clouds (15 and 50 m MVDi). The observed clouds ranged from fully glaciated to fully liquid, where the liquid clouds were at least partially supercooled. The air total temperature decreased at the test section when the cloud was activated due to evaporation. The ice accretions observed ranged from sharp arrow-like accretions, characteristic of ice-crystal erosion, to cases with double-horn shapes, characteristic of supercooled water accretions.

upwind schemes↗
NASA NTRS2017

An Initial Study of the Fundamentals of Ice Crystal Icing Physics in the Nasa Propulsion Systems Laboratory

This paper presents results from an initial study of the fundamental physics of ice-crystal ice accretion using the NASA Propulsion Systems Lab (PSL). Ice accretion due to the ingestion of ice-crystals is being attributed to numerous jet-engine power-loss events. The NASA PSL is an altitude jet-engine test facility which has recently added a capability to inject ice particles into the flow. NASA is evaluating whether this facility, in addition to full-engine and motor-driven-rig tests, can be used for more fundamental ice-accretion studies that simulate the different mixed-phase icing conditions along the core flow passage of a turbo-fan engine compressor. The data from such fundamental accretion tests will be used to help develop and validate models of the accretion process. The present study utilized a NACA0012 airfoil. The mixed-phase conditions were generated by partially freezing the liquid-water droplets ejected from the spray bars. This paper presents data regarding (1) the freeze out characteristics of the cloud, (2) changes in aerothermal conditions due to the presence of the cloud, and (3) the ice accretion characteristics observed on the airfoil model. The primary variable in this test was the PSL plenum humidity which was systematically varied for two duct-exit-plane velocities (85 and 135 ms) as well as two particle size clouds (15 and 50 m MVDi). The observed clouds ranged from fully glaciated to fully liquid, where the liquid clouds were at least partially supercooled. The air total temperature decreased at the test section when the cloud was activated due to evaporation. The ice accretions observed ranged from sharp arrow-like accretions, characteristic of ice-crystal erosion, to cases with double-horn shapes, characteristic of supercooled water accretions.

Evaporative Cooling↗