SEARCH · Engineering Papers
Results for “CLEARANCE”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Radioactive Waste Minimization - Clearance for Reuse, Recycling and Disposal - 19598
Virtually all activities related to radioactive materials and to the utilization of nuclear energy generate radioactive waste. Due to limited storage facilities and waning public acceptance for long-term disposal of radioactive waste as well as the associated cost, implementation of strategies and methods for its effective reduction are mandatory. Clearance of materials is one possible concept to reach this goal. The International Atomic Energy Agency (IAEA) defines the process of clearance as 'the removal of radioactive materials or radioactive objects within authorized practices from any further regulatory control by the regulatory body.' Thus, these materials are no further treated as radioactive waste and may be recycled or disposed of conventionally. In quantitative terms, clearance is generally related to the '10 μSv-Concept' This means that the effective dose expected to be incurred by any member of the public due to cleared materials is of the order of 10 μSv or less in a year. A combination of appropriate clearance concepts, methods and measurement techniques, following an integrated clearance strategy for a project, allows the return of up to 97 % of the mass of a decommissioned NPP to the conventional waste cycle. This includes the concept of clearance for a specific purpose, often referred to as 'conditional clearance', i.e. the case where a certain condition has to be fulfilled before the act of clearance has been completed. As a technical expert organization, TUV NORD EnSys accompanied the development, implementation and execution of clearance procedures in more than 13 nuclear power-plants and installations, either operational or in various states of decommissioning. Thus, TUV Nord EnSys has abundant experience in and a comprehensive overview on the implementation of different clearance strategies and procedures. Considering the increased waste-volumes and additional waste-streams to be handled during decommissioning, the transition to a decommission-focused clearance system is of vital importance for successful waste-minimization. This paper provides a view on the perspective of a technical support organisation (TSO) towards implementation of a holistic clearance strategy into the decommissioning concept for radioactive waste minimization. (authors)
Different Approaches for Clearance of Metals - a Comparison - 19079
Large quantities of contaminated and potentially contaminated metals are generated during the lifetime of nuclear installations, especially when they are dismantled and demolished. In many countries, clearance for recycling is considered Best Practice for the management of metals which are contaminated or potentially contaminated. In some countries, such as Sweden, it has become a legal requirement to recycle metals and other materials when it is safe to do so and the cost is reasonable. Therefore, multiple management routes are available with the aim of establishing a graded approach. These include general (unconditional) clearance, conditional (specific) clearance of surface contaminated metals, conditional clearance of metal ingots after treatment in a licensed facility and in some cases, recycling inside the nuclear sector. Kemakta Konsult AB recently derived rounded clearance limits for the conditional clearance of scrap metal for re-melting from the decommissioning of Swedish nuclear sites, on behalf of the Swedish Radiation Safety Authority (SSM). The calculations used the RP89 exposure scenarios, but the parameters were adjusted to reflect normal practice in the Swedish scrap metal and recycling industries. The study found that, for most of the 39 radionuclides judged to be relevant, the rounded clearance levels were the same as or higher than those in RP 89. However, longer transport times in Sweden compared to the ones used for RP 89 resulted in lower rounded clearance levels for three gamma-emitting radionuclides, including Co-60, the most important radionuclide in terms of dose exposure. Cyclife Sweden AB has, through more than 40 years of operation of the metal treatment facility at the Studsvik industrial site, significant experience of the practical implementation of clearing metal ingots as well as metallic strap, in total about 50,000 tonnes. A previous study confirms very low radiological impact to the receivers of the ingots and to the general public under the current procedures and conditions for clearance. The production of steel ingots for recycling in the Cyclife plant involves pre-treatment (segmentation and decontamination) followed by melting. Certain nuclides, like Cs-137 and alpha nuclides, are transferred to the secondary waste (slag and filter dust) in the melting process. The non-separated nuclides are homogenized in the ingot. The radionuclides that are present in the ingots are expected to remain in the metal during re-melting at metal works. The general approach of [1] together with specific information for typical ingots has been used to further verify the radiological implications of applying conditional clearance of ingots. This paper provides a background, present the studies performed, give an overview of the findings and the overall result including a comparison between different approaches. (authors)
Enhanced Sustainability in Treatment of Contaminated Metals for Clearance and Recycling - 20290
Cyclife Sweden AB has, for more than 30 years, provided metal treatment services to the domestic and international nuclear industry with the aim of creating value through metal clearance and recycling. These operations are to a large extent based on the concept that the materials, after pre-treatment, including decontamination, will be melted for clearance. During the melting process, some nuclides separate from the metal while the remaining radioactivity becomes fully homogenized in the metal bath and the resulting ingots, along with the samples taken before casting At a time when activities to fight Climate Challenge are in focus, any savings in energy consumption, in addition to the positive environmental effect of recycling metals back to industry, is more than welcome. If the clearance of certain metallic items can be achieved safely, without using melting, it is the environmentally preferred option provided it carries a reasonable cost. It is even better if an object can go through a decontamination and clearance process prior to re-use inside or outside the nuclear sector. Cyclife Sweden is currently investing in a direct clearance process, to be operated in parallel with the melting process. This new process is expected to be fully operational in the late summer of 2020 and includes pre-treatment, decontamination and heavily shielded clearance measurement installations. The treatment will also allow clearance measurements of larger objects without the need for segmentation, along with allowing objects composed of different materials, like electric motors can be accepted for treatment. This paper gives an overview of the circular economy aspects in a nuclear back-end context, the Cyclife approach to further implement a circular economy approach in the processes, Material Acceptance Criteria for treatment, the facility set-up for the new process and how the melting route and the direct route can be combined in an efficient industrial scale process. To put the new capabilities into perspective, the two different treatment and clearance approaches, i.e. direct clearance and melting, are to be compared. (authors)
Allometric scaling for predicting human clearance of bisphenol A
The investigation of interspecies differences in bisphenol A (BPA) pharmacokinetics (PK) may be useful for translating findings from animal studies to humans, identifying major processes involved in BPA clearance mechanisms, and predicting BPA PK parameters in man. For the first time, a large range of species in terms of body weight, from 0.02 kg (mice) to 495 kg (horses) was used to predict BPA clearance in man by an allometric approach. BPA PK was evaluated after intravenous administration of BPA in horses, sheep, pigs, dogs, rats and mice. A non-compartmental analysis was used to estimate plasma clearance and steady state volume of distribution and predict BPA PK parameters in humans from allometric scaling. In all the species investigated, BPA plasma clearance was high and of the same order of magnitude as their respective hepatic blood flow. By an allometric scaling, the human clearance was estimated to be 1.79 L/min (equivalent to 25.6 mL/kg.min) with a 95% prediction interval of 0.36 to 8.83 L/min. Our results support the hypothesis that there are highly efficient and hepatic mechanisms of BPA clearance in man. - Highlights: • Allometric scaling was used to predict BPA pharmacokinetic parameters in humans. • In all species, BPA plasma clearance approached hepatic blood flow. • Human BPA clearance was estimated to be 1.79 L/min.
Investigation into the Development and Testing of a Simplex Capacitance Sensor for Rotor Tip Clearance Measurement in Turbo Machinery
The rotor tip clearance is a vital parameter to characterize turbomachinery performance. It is an essential measurement during engine development and testing. The efficiency of the major modules like fan, compressor and turbine depends on the optimum running clearances. The capacitive sensor is preferred for tip clearance measurements because of various inherent advantages. They are fabricated through complex processes for turbomachinery application and are expensive. These sensors are exposed to harsh engine environments and are likely to exhibit degraded performance. Insulation failure at sensing head, connector contamination and micro-cracks in the MI (Mineral Insulated) cable leads to noise in the signal output. Frequent mechanical failures are also seen due to work hardening of MI cables, lead connector detachments and failure of micro fins at interconnects. Fault fixing of these is tedious and very expensive. This paper presents the concerted effort in developing a simple capacitance sensor addressing potential sensor failure issues. The design features include simple construction, ease of sensor assembly, component realization and troubleshooting. The design also addresses all safety requirements. The sensor has a large sensing area (7.6 mm diameter) producing very stable, high-level signal. The developed sensor produces output that varies from 1 V{sub P-P} to 11 V{sub P-P} for blade-tip gaps between 3 mm to 0.4 mm respectively. Blade pass simulation studies across the sensor, display almost flat response at minimum clearance. This feature results in very minimal data acquisition errors. The sensor along with RC (Resistance-Capacitance) conditioning electronics was successfully used for clearance measurement on fan stage of gas turbine engine. Test results are in line with the predictions. Extensive tip clearance measurements on the engine validate the design. The current work provides an insight into the development of a simplex capacitance sensor for tip clearance measurement.
SISTec: Mathematical Calibration of Large Clearance Monitors - 18265
One major path for clearance of large amount of waste arising from the decommission of nuclear power plants is based on measurement with large clearance monitors (also known as free release measurement facilities). These devices utilize multi-detector plastic scintillator arrays (large clearance monitors can consist of up to 24 plastic scintillators) to offer both, extremely low minimum detectable activities (MDA) and short measurement times for waste packages weighing up to one metric ton. However, a major problem with these devices is to obtain nuclide specific efficiencies, especially for geometrically complex large waste packages. Normal procedure for estimating the efficiency is to device dummy waste packages and attach point sources with well-known activities to unfavourable positions in these packages. In accordance with this procedure, calibration factors can be derived in a radiological conservative way. Devising such test dummies is not always possible and the procedure is prone to generating large measurement uncertainties. In this publication, we propose a new method to derive calibration factors by means of the Los Alamos National Laboratory (LANL) simulation tool Monte Carlo N-Particle (MCNP) and a statistical-phenomenological model for the detector characterization. In a multi-step approach, first the detector response for a distribution of activity in a waste package is calculated and subsequently the detectors are mathematically characterized. Applying state of the art statistical and optimizing procedures, parameters for the detector response are derived in a self-consistent way. This also allows to rigorously propagate the uncertainties to the final calculated calibration factors according to the Guide to the Expression of Uncertainty in Measurement (GUM supplement 1). To validate the derived parameters for the detector characterization a minimally invasive experimental setup was devised and installed into the large clearance monitor. It consisted of an aluminum swivel arm which could position point sources to the relevant coordinates. The so collected measurement data not only allowed to investigate the precision of the calculated calibration factors, but also to probe the location of concentrated activity sources in the waste package. Furthermore, data on measurements with dummy waste packages were collected to test the reproducibility of well-known calibration factors. We present the software tool SIStec, which will provide an intuitive user-interface to generate and simulate waste package models and execute the above-mentioned method. Using SIStec, different scenarios for the distribution of activity in the waste package can be probed. This will also allow to optimize the clearance process on various levels. For example, measurement time for pre-measurements can be reduced in exchange for unfavourable calibration factors, which would still allow to meet the regulator limits for clearance. (authors)
SIGN-R1 and complement factors are involved in the systemic clearance of radiation-induced apoptotic cells in whole-body irradiated mice
Although SIGN-R1-mediated complement activation pathway has been shown to enhance the systemic clearance of apoptotic cells, the role of SIGN-R1 in the clearance of radiation-induced apoptotic cells has not been characterized and was investigated in this study. Our data indicated that whole-body γ-irradiation of mice increased caspase-3{sup +} apoptotic lymphocyte numbers in secondary lymphoid organs. Following γ-irradiation, SIGN-R1 and complements (C4 and C3) were simultaneously increased only in the mice spleen tissue among the assessed tissues. In particular, C3 was exclusively activated in the spleen. The delayed clearance of apoptotic cells was markedly prevalent in the spleen and liver of SIGN-R1 KO mice, followed by a significant increase of CD11b{sup +} cells. These results indicate that SIGN-R1 and complement factors play an important role in the systemic clearance of radiation-induced apoptotic innate immune cells to maintain tissue homeostasis after γ-irradiation. - Highlights: • Splenic SIGN-R1{sup +} macrophages are activated after γ-irradiation. • C3 and C4 levels increased and C3 was activated in the spleen after γ-irradiation. • SIGN-R1 mediated the systemic clearance of radiation-induced apoptotic cells in spleen and liver.
Glutamine antagonist-mediated immune suppression decreases pathology but delays virus clearance in mice during nonfatal alphavirus encephalomyelitis
Infection of weanling C57BL/6 mice with the TE strain of Sindbis virus (SINV) causes nonfatal encephalomyelitis associated with hippocampal-based memory impairment that is partially prevented by treatment with 6-diazo-5-oxo-l-norleucine (DON), a glutamine antagonist (Potter et al., J Neurovirol 21:159, 2015). To determine the mechanism(s) of protection, lymph node and central nervous system (CNS) tissues from SINV-infected mice treated daily for 1 week with low (0.3 mg/kg) or high (0.6 mg/kg) dose DON were examined. DON treatment suppressed lymphocyte proliferation in cervical lymph nodes resulting in reduced CNS immune cell infiltration, inflammation, and cell death compared to untreated SINV-infected mice. Production of SINV-specific antibody and interferon-gamma were also impaired by DON treatment with a delay in virus clearance. Cessation of treatment allowed activation of the antiviral immune response and viral clearance, but revived CNS pathology, demonstrating the ability of the immune response to mediate both CNS damage and virus clearance. -- Highlights: • Treatment with glutamine antagonist DON protects mice from alphavirus encephalitis. • DON treatment suppresses the antiviral immune response in draining lymphoid tissue. • DON decreases inflammation and cell death in infected brain and spinal cord. • DON decreases production of antiviral antibody and IFN-γ and delays virus clearance. • With cessation of DON treatment, immunopathology and virus clearance appear.
The effects of food quantity, light, and temperature on clearance rates in freshwater bivalves (Cyrenidae and Unionidae)
Assessing the environmental variables that influence freshwater bivalve filtration activity is key to better understand the functioning of stream ecosystems. Here, the effects of light (0 ± 0 µmol m –2 s –1 and 19 ± 2 µmol m –2 s –1 ) and temperature (10, 15, 20 and 25°C) on the clearance rates of two bivalve species: the Asian clam Corbicula fluminea (Cyrenidae) and pocketbook Lampsilis ovata (Unionidae) were assessed under controlled laboratory conditions at two different concentrations of algal food (i.e., 10,000 cells ml –1 and 100,000 cells ml –1 ). Clearance rates for C. fluminea varied from 0 to 491 ml g –1 h –1 , while the observed range for L. ovata was 0 to 905 ml g –1 h –1 . We found that the relative contribution of the tested variables was species-dependent. While temperature plays a major role in the clearance rates of C. fluminea , food concentration was the most significant variable in the clearance rate of L. ovata . Our results confirm the complex interactions between abiotic and biotic factors in freshwater bivalve filtration activity. Overall, clearance rates are highly variable especially in C. fluminea and presumably regulated by other untested factors suggesting high plasticity in filtration.
Clearance Tracker
The manual process of managing security clearance was cumbersome and inefficient, involving the emailing of a fillable PDF from person to person. There was no visibility into the progress of a clearance submission. Clearance Tracker provides an automated workflow with data validation and notifications to manage the clearance process. The automated workflow routes notifications to individuals when their input is required. All participants can track the progress of clearance requests.
Transport and Treatment of Chapelcross Gas Ducts for Clearance and Recycling - 19662
In the summer of 2018, Cyclife, the EDF group's specialist radioactive waste management and decommissioning company, transported sixteen gas ducts and associated equipment from the shutdown Chapelcross nuclear power plant to treatment facilities in the UK and Sweden. The client requested a full removal, treatment and disposal service for approximately 820 te of low level metallic waste comprising Upper Gas Duct Assemblies (including bellows), Upper Gas Duct elbows, Filter Pots and Convoluted pipework. The complex scope involved heavy lifting, transport by road and sea, processing and recycling on a large scale, thereby necessitating involvement of a wide range of suppliers at different tiers all managed by Cyclife. The purpose of the entire project was to safely handle and treat all of the components for clearance and recycling into the public domain for the manufacture of new steel products. Most of the treatment took place in Cyclife's nuclear licensed metal treatment facility in Sweden. Cyclife has a long and unique experience of arranging safe transport of large contaminated components on road and sea. The metal treatment facility in Sweden can, without special arrangements, receive components up to 30 meters long with a weight of up to 400 tonnes for decontamination, size reduction and melting. The actual treatment of the components consisted of the following steps: a) Separation of a gas duct from the gantry, b) size reduction, radiological verification measurements and clearance of the gantry, c) stepwise segmentation of the gas duct and elbow including removal of asbestos, d) decontamination, e) melting, f) radiological assessment and clearance of the metal ingots, g) management of the secondary waste for return to UK. The result of the project, upon completed treatment of all the material, demonstrates a high recycling rate of the material. 5-10% of the original mass of material will have to disposed as radioactive waste. This number include all residues, untreatable material (asbestos, mineral wool, filters etc.) and two melt batches with a too high activity content for clearance. The paper takes the reader through the entire project from the initial planning to the clearance of the metal and the return of the secondary waste to UK for disposal. It will also present and discuss pros and cons for alternative management approaches in several perspectives. (authors)
Programmed cell clearance: From nematodes to humans
Programmed cell clearance is a highly regulated physiological process of elimination of dying cells that occurs rapidly and efficiently in healthy organisms. It thus ensures proper development as well as homeostasis. Recent studies have disclosed a considerable degree of conservation of cell clearance pathways between nematodes and higher organisms. The externalization of the anionic phospholipid phosphatidylserine (PS) has emerged as an important “eat-me” signal for phagocytes and its exposition on apoptotic cells is controlled by phospholipid translocases and scramblases. However, there is mounting evidence that PS exposure occurs not only in apoptosis, but may also be actively expressed on the surface of cells undergoing other forms of cell death including necrosis; PS is also expressed on the surface of engulfing cells. Additionally, PS may act as a “save-me” signal during axonal regeneration. Here we discuss mechanisms of PS exposure and its recognition by phagocytes as well as the consequences of PS signaling in nematodes and in mammals. - Highlights: • Cell clearance pathways are conserved between nematodes and mammals. • Phosphatidylserine (PS) externalization is a common signal for cell clearance. • Translocases and scramblases are involved in PS exposure during apoptosis. • PS also functions as a “save-me” signal to mediate the fusion of injured axons. • Definitions of cell death should take into account whether/how cells are cleared.
SU-F-T-496: An Investigation of Two Novel Devices for Testing Linac Clearance During CT Simulation
Purpose: This work’s objective is to determine the efficacy of two newly patented devices termed the Mor-O rings, Mark1 and Mark2, developed to predict collisions between the patient and a linac at the time of CT simulation. Methods: Mark1: A ring with an inner radius equal to the distance between the isocenter and the nearest portion of a linac head(diso) was made. This is mounted to a stand that allows vertical repositioning. The ring is placed around the patient on the CT table and aligned with isocenter. The patient is moved through the ring. If the ring touches the patient, a collision is predicted. To test this device, predicted collisions were marked on a phantom. The phantom was then repositioned on the linac table where the collisions were verified. Mark2: An arc with the radius diso was created with a re-locatable half-linac head wire-frame. The Mark2 is positioned in the same way as the Mark1 but can additionally mimic couch and gantry angulations. The Mark2 was tested with a volunteer using multiple couch, gantry and isocenter positions. The volunteer was then repositioned on the linac table to verify the angles of collisions. Results: Mark1: One isocenter out of ten showed negative clearance (0.9mm) on the linac table. All other collisions were predicted with 1 to 36mm of additional clearance. Mark2: All collisions were prevented with an additional 1.3 to 14.8 degrees of clearance. Conclusion: The Mark1 prototype is able to predict all collisions when no couch angulation is used. This device takes less than a minute to setup and is simple to use. The Mark2, when testing beam geometries used for noncoplanar SBRT, was able to prevent all collisions with 1.3 to 14.8 degrees additional clearance. Improvements in construction for both devices could increase accuracy and usability. Andrew Morrow owns Morrow Physics, LLC and Brian Massingill owns Spur Physics, LLC. We are both listed on the patent for the devices investigated in this work (patent 9220922). Our current employer, Baylor Scott and White, is also on the patent.
Combined Effects of Gravity, Bending Moment, Bearing Clearance, and Input Torque on Wind Turbine Planetary Gear Load Sharing: Preprint
This computational work investigates planetary gear load sharing of three-mount suspension wind turbine gearboxes. A three dimensional multibody dynamic model is established, including gravity, bending moments, fluctuating mesh stiffness, nonlinear tooth contact, and bearing clearance. A flexible main shaft, planetary carrier, housing, and gear shafts are modeled using reduced degrees-of-freedomthrough modal compensation. This drivetrain model is validated against the experimental data of Gearbox Reliability Collaborative for gearbox internal loads. Planet load sharing is a combined effect of gravity, bending moment, bearing clearance, and input torque. Influences of each of these parameters and their combined effects on the resulting planet load sharing are investigated. Bendingmoments and gravity induce fundamental excitations in the rotating carrier frame, which can increase gearbox internal loads and disturb load sharing. Clearance in carrier bearings reduces the bearing load carrying capacity and thus the bending moment from the rotor can be transmitted into gear meshes. With bearing clearance, the bending moment can cause tooth micropitting and can induce planetbearing fatigue, leading to reduced gearbox life. Planet bearings are susceptible to skidding at low input torque.
Autophagy induced by type III secretion system toxins enhances clearance of Pseudomonas aeruginosa from human corneal epithelial cells
Highlights: • Ocular P. aeruginosa isolates induce autophagy in human corneal epithelial cells. • T3SS mutants were defective in inducing autophagy and becn1 expression. • T3SS (−)ve strains were less sensitive to external autophagy modulators. • Pro-autophagic role of T3SS regulates intracellular survival of P. aeruginosa. Corneal ulcers caused by Pseudomonas aeruginosa may lead to severe visual disability due to impaired bacterial clearance from corneal tissues. Our purpose was to study the role of autophagy in the intracellular clearance of P. aeruginosa from human corneal epithelial cells (HCET) and its regulation by the bacterial type III secretion system (T3SS) toxins. Nine different corneal ulcer isolates of P. aeruginosa, PAO1 and T3SS mutants of PAO1 were used to infect HCET cells. Induction of autophagy (Immunofluorescence and Western blot) and pro-inflammatory gene expression (real time PCR) by P. aeruginosa and the role of autophagy in intracellular bacterial clearance were studied in the context of T3SS genotypes. The clinical isolates and PAO1 induced autophagy irrespective of the T3SS genotype, whereas the T3SS mutants were relatively defective in inducing autophagy and becn1 gene expression. External induction of autophagy significantly reduced the intracellular load of P. aeruginosa strains that were associated with worst clinical outcomes. The T3SS negative isolate and PAO1ΔexoST were less sensitive to pharmacological modulation of autophagy and had relatively higher replication potential, suggesting a possible mechanism of bacterial survival in the absence of T3SS toxins. Overall, our results highlight a selective role for autophagy in bacterial clearance from corneal epithelial cells and emphasize the pro-autophagic role of bacterial toxins in the context of corneal ulcers.
The Role of Infected Cell Proliferation in the Clearance of Acute HBV Infection in Humans
Around 90–95% of hepatitis B virus (HBV) infected adults do not progress to the chronic phase and, instead, recover naturally. The strengths of the cytolytic and non-cytolytic immune responses are key players that decide the fate of acute HBV infection. In addition, it has been hypothesized that proliferation of infected cells resulting in uninfected progeny and/or cytokine-mediated degradation of covalently closed circular DNA (cccDNA) leading to the cure of infected cells are two major mechanisms assisting the adaptive immune response in the clearance of acute HBV infection in humans. We employed fitting of mathematical models to human acute infection data together with physiological constraints to investigate the role of these hypothesized mechanisms in the clearance of infection. Results suggest that cellular proliferation of infected cells resulting in two uninfected cells is required to minimize the destruction of the liver during the clearance of acute HBV infection. In contrast, we find that a cytokine-mediated cure of infected cells alone is insufficient to clear acute HBV infection. Lastly, our modeling indicates that HBV clearance without lethal loss of liver mass is associated with the production of two uninfected cells upon proliferation of an infected cell.
Compressor airfoil tip clearance optimization system
A compressor airfoil tip clearance optimization system for reducing a gap between a tip of a compressor airfoil and a radially adjacent component of a turbine engine is disclosed. The turbine engine may include ID and OD flowpath boundaries configured to minimize compressor airfoil tip clearances during turbine engine operation in cooperation with one or more clearance reduction systems that are configured to move the rotor assembly axially to reduce tip clearance. The configurations of the ID and OD flowpath boundaries enhance the effectiveness of the axial movement of the rotor assembly, which includes movement of the ID flowpath boundary. During operation of the turbine engine, the rotor assembly may be moved axially to increase the efficiency of the turbine engine.