Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHROMIUM 42”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nuclear Data Sheets for A = 42

The experimental data are evaluated for known nuclides of mass number A = 42 (Al, Si, P, S, Cl, Ar, K, Ca, Sc, Ti, V, Cr). Detailed evaluated level properties and related information are presented, including adopted values of level and γ–ray energies, decay data (energies, intensities and placement of radiations), and other spectroscopic data. This work supersedes earlier full evaluations of A = 42 published by B. Singh, J.A. Cameron – Nucl.Data Sheets 92, 1 (2001) and P.M. Endt – Nucl. Phys. A521, 1 (1990); Errata and Addenda Nucl. Phys. A529, 763 (1991); Errata Nucl. Phys. A564, 609 (1993) (also P.M. Endt – Nucl. Phys. A633, 1 (1998) update). No excited states are known in {sup 42}Al, {sup 42}P, {sup 42}V and {sup 42}Cr, and structure information for {sup 42}Si and {sup 42}S is quite limited. There are no decay schemes available for the decay of {sup 42}Al, {sup 42}Si, {sup 42}P, {sup 42}V and {sup 42}Cr, while the decay schemes of {sup 42}Cl and {sup 42}Ti are incomplete in view of scarcity of data, and large gap between their Q–values and the highest energy levels populated in corresponding daughter nuclei. Structures of {sup 42}Ca, {sup 42}K, {sup 42}Sc and {sup 42}Ar nuclides remain the most extensively studied via many different nuclear reactions and decays.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Progress Report for Diffusion Welding of the NGNP Process Application Heat Exchangers (Revision 1)

The U.S. Department of Energy selected the high temperature gas-cooled reactor as the basis for the Next Generation Nuclear Plant (NGNP). The NGNP will demonstrate the use of nuclear power for electricity, hydrogen production, and process heat applications. The NGNP Project is currently investigating the use of metallic, diffusion welded, compact heat exchangers to transfer heat from the primary (reactor side) heat transport system to the secondary heat transport system. An intermediate heat exchanger will transfer this heat to downstream applications such as hydrogen production, process heat, and electricity generation. The channeled plates that make up the heat transfer surfaces of the intermediate heat exchanger will have to be assembled into an array by diffusion welding. This report describes the preliminary results of a scoping study that evaluated the diffusion welding process parameters and the resultant mechanical properties of diffusion welded joints using Alloy 800H. The long-term goal of the program is to progress towards demonstration of small heat exchanger unit cells fabricated with diffusion welds. Demonstration through mechanical testing of the unit cells will support American Society of Mechanical Engineers rules and standards development, reduce technical risk, and provide proof of concept for heat exchanger fabrication methods needed to deploy heat exchangers in several potential NGNP configurations.1 Researchers also evaluated the usefulness of modern thermodynamic and diffusion computational tools (Thermo-Calc and Dictra) in optimizing the parameters for diffusion welding of Alloy 800H. The modeling efforts suggested a temperature of 1150°C for 1 hour with an applied pressure of 5 MPa using 15 μm nickel foil as joint filler to reduce chromium oxidation on the welded surfaces. Good agreement between modeled and experimentally determined concentration gradients was achieved

08 HYDROGEN↗

Ease of cutting of high-chromium ferrite steels

The ease of cutting of high-chromium ferrite steels is considered. In cutting, the productivity is found to be satisfactory, but it is difficult to obtain a machined surface of acceptable quality. Recommendations are made for improving the quality of the machined surface.

42 ENGINEERING↗

Evaluation of the Long-Term Operating Life of Chromium-Molybdenum-Vanadium Steel Components with Respect to Micro-Damage

Stress-rupture strength tests are performed and metal micro-damage is studied in an electron microscope for a body made of chromium-molybdenum-vanadium steel 15Kh1M1FL with a long (331,000 h) running time. Dependences are found for metal endurance on relative integrity, and images are given for different scale points of micro-damage. On the basis of conformity of damaging effects on the life of fixed values of integrity and micro-damage scale points residual life factoors are determined for the main points of the scale.

42 ENGINEERING↗

Highly efficient removal and sequestration of Cr(VI) in confined MoS 2 interlayer Nanochannels: Performance and mechanism

Environmental contamination by Cr(VI) is of particular concern because of its severe toxicity and high mobility. In this study, we employed two-dimensional MoS 2 nanosheets in the removal of Cr(VI), with an emphasis on revealing the removal mechanisms, and how the compositional and structural uniqueness of 2D MoS 2 nanomaterials intrinsically impact the Cr removal efficiency. Through batch experiments with dispersed nanosheets, we found that MoS 2 nanosheets exhibited a high Cr(VI) removal capacity at ~1100 mg/g via a phase-dependent mechanism. Particularly, the 1T polymorph in the MoS 2 nanosheets removed Cr(VI) through a redox-reaction mechanism, which was different from the adsorptive removal of Cr(VI) by MoS 2 reported previously, highlighting the compositional effects on the removal mechanism and performance. More importantly, the reduced product Cr(III) was concurrently removed via precipitation and adsorption onto the MoS 2 nanosheets, which could avoid the additional pH-elevation step that is typically needed in the conventional treatment. The unique 2D flake-like structure of MoS 2 nanosheets enabled the formation of aligned and ion-accessible nanochannels, where Cr(VI) species were accommodated, reduced and sequestered. The irreversible shrinking of the nanochannels under drying modified the interior of the layer-stacked structure into confined compartments preventing the release and re-oxidation of the immobilized Cr(III). In conclusion, the compiled results highlight the effects of MoS 2 composition and structure on the Cr removal efficiency and mechanism, which has substantial implications on future studies tailoring these unique features of 2D nanomaterials for various remediation scenarios.

42 ENGINEERING↗

Influence of Carbides and Alloying Elements on Intercrystallite Corrosion in Cutting-Ceramic Inserts

It is established that intercrystallite corrosion of cutting-ceramic inserts arises when the chromium content in the peripheral zone of the grains is depleted by the deposition of chromium carbides at the grain boundaries, in the presence of stress due to the fast cooling of the inserts from high temperatures. This is especially apparent when 12Kh18N10Т, 40Kh13, 14Kh17N2, and other steels that are hard to machine are worked by a tool equipped with inserts of VOK-60M modified cutting ceramic. Research shows that the intercrystallite corrosion of cutting-ceramic inserts may be attributed to the stress arising in the surface layers of the grains as a result of carbide or nitride deposition. Heating cutting-ceramic inserts at 650–800°С lowers this stress and restores their resistance to intercrystallite corrosion. Research also shows that chromomanganese cutting-ceramic inserts are less susceptible to intercrystallite corrosion than are chromium–manganese–nickel inserts, while chromium–manganese–nickel cutting-ceramic inserts are less susceptible than are chromonickel inserts. The benefits of chromium–manganese–nickel cutting-ceramic inserts are especially pronounced with relatively brief machining of 12Kh18N10Т, 40Kh13, 14Kh17N2, and other such steels, in rigorous conditions, with a temperature of 600–650°С in the workpiece–tool contact zone. A new theory of the intercrystallite corrosion of VOK-60M modified cutting ceramic is based on the role of the kinetic factor at the relatively low tempering temperatures associated with the deposition of metastable carbide, although this does not lead to maximum change in free energy of the system but only to a relative change. In the cutting ceramic, this carbide may be chromium carbide (Cr, Тi){sub 23}C{sub 6}, which is greatly enriched with titanium. With increase in tempering temperature, the deposited carbide tends toward the stable composition Cr{sub 23}С{sub 6}. Prolonged holding at the tempering temperature also tends to favor thermodynamic equilibrium. In other word, the chromium carbide is gradually enriched to reach the stable composition Cr{sub 23}С{sub 6}. This process is more rapid at higher temperatures. Obviously, the variation in composition of the carbide deposited at the grain boundaries in VOK-60M cutting ceramic with change in temperature and holding time will affect the kinetics of electrochemical solution of the system consisting of the carbide in contact with a solid solution. Research shows that vacuum sintering and annealing markedly improve the thermal stability. For the cutting ceramic, this is explained not only by the removal of fusible impurities but also by the larger quantity of aluminum and other alloying elements that remain in the strengthening phase, rather than being bound in oxides. Sintering in vacuum ensures greater plasticity of cutting ceramic based on nickel and cobalt in cutting 12Kh18N10Т and 14Kh17N2 steel at high speeds, with high temperatures in the machining zone. In addition, on sintering in vacuum furnaces, the content of small nonmetallic inclusions in the basic structure is 5–7 times less than in regular cutting ceramic. That significantly improves the deformability of the ceramic inserts.

36 MATERIALS SCIENCE↗

Aluminum and Other Coatings for the Passivation of Tritium Storage Vessels

Using a highly sensitive residual gas analyzer, the off-gassing of hydrogen, water, and hydrocarbons from surface-treated storage vessels containing deuterium was measured. The experimental storage vessels were compared to a low-off-gassing, electro-polished 304L canister. Alternative vessels were made out of aluminum, or were coatings on 304L steel. Coatings included powder pack aluminide, electro-plated aluminum, powder pack chromide, dense electro-plated chromium, copper plated, and copper plated with 25 and 50 percent nano-diamond. Vessels were loaded with low pressure deuterium to observe exchange with protium or hydrogen as observed with formation of HD and HDO. Off gas of D 2 O or possible CD 4 was observed at mass 20. The main off-gas in all of the studies was H 2 . The studies indicated that coatings required significant post-coating treatment to reduce off-gas and enhance the permeation barrier from gases likely added during the coating process. Dense packed aluminum coatings needed heating to drive off water. Electro-plated aluminum, chromium and copper coatings appeared to trap hydrogen from the plating process. Nano-diamond appeared to enhance the exchange rate with hydrogen off gas, and its coating process trapped significant amounts of hydrogen. Aluminum caused more protium exchange than chromium-treated surfaces. Aluminum coatings released more water, but pure aluminum vessels released small amounts of hydrogen, little water, and generally performed well. Chromium coating had residual hydrogen that was difficult to totally outgas but otherwise gave low residuals for water and hydrocarbons. Our studies indicated that simple coating of as received 304L metal will not adequately block hydrogen. The base vessel needs to be carefully out-gassed before applying a coating, and the coating process will likely add additional hydrogen that must be removed. Initial simple bake-out and leak checks up to 350° C for a few hours was found to be inadequate. All of the studies indicated that vessels needed several days of vacuum baking at 350-450° C to fully outgas the residual gases, which were mostly hydrogen. The current standard practice of out-gassing from ultra-clean, electro-polished 304L vessels with both vacuum bake-out and followed by an oxidative bake out to enhance the chromium surface performed the best in these studies.

08 HYDROGEN↗

Influence of Diffusional Surface Alloying on the Hardened-Layer Thickness for Gray-Iron Machine Parts

In diffusional surface alloying, gray-iron components of vehicles and machines are heated in contact with oxides of the alloying elements (chromium, titanium, vanadium, and molybdenum). The influence of the sample temperature and holding time in diffusional surface alloying on the thickness of the hardened layer is investigated, on the basis of experiment planning. The models obtained may be used to ensure specified thickness of the hardened layer in diffusional surface alloying, with maximum productivity in both production and repair processes.

36 MATERIALS SCIENCE↗

Synchrotron Characterization of the Oxidation of Advanced Steel Cladding Alloys

Advanced steel alloys are proposed as nuclear fuel claddings due to their high corrosion resistance under extreme conditions of pressure and temperature. APMT is an iron based alloy (Fe-22wt.%Cr-5.8wt.%Al) and Alloy 33 is a mixture of iron, chromium, and nickel (32wt.%Fe-33wt.%Cr-31wt.%Ni). This paper focuses on studying the corrosion mechanisms for these alloys under exposure to superheated steam at 800 deg. C and 1000 deg. C using the synchrotron based X-ray diffraction (XRD) and Hard X-ray photoelectron spectroscopy (HAXPES) techniques. HAXPES data was collected using 4 keV X-rays with a 1x1 mm spot size at X24A beamline. Specimens were mounted on the sample holder. The specimens were tilted 5 degrees relative to the beam and the estimated probe depth (for this fixed energy) is 63 A. The X-ray wavelength for XRD studies at X14A beamline is 0.7792 A with a beam size of of 2 x 0.2 mm{sup 2}. Specimens were exposed to steam environment at 800 and 1000 deg. C for 8, 24, and 48 hours. For Alloy 33; a layer of mixed Cr{sub 2}O{sub 3} and FeCr{sub 2}O{sub 4} oxides is formed after exposure to steam. Specimen tilting indicated that Cr{sub 2}O{sub 3} is formed near the metal/oxide interface and FeCr{sub 2}O{sub 4} was formed on the oxide surface. The oxide peak intensities increased with an increase in steam temperature. The specimen oxidized at 1000 deg. C had well-developed oxide peaks compared to the specimen oxidized at 800 deg. C. For APMT; a layer of mixed α-Al{sub 2}O{sub 3} and monoclinic θ-Al{sub 2}O{sub 3} oxides is formed on the outer surface. The peak intensities of the monoclinic θ-Al{sub 2}O{sub 3} phase, decreases relative to the peaks from the Al{sub 2}O{sub 3} phase with increasing tilt angle. This indicates that the surface is dominated by the θ-Al{sub 2}O{sub 3}. After exposure to steam at 800 deg. C, oxidation of Alloy 33 results in the formation of Cr{sub 2}O{sub 3} oxide with time and absence of both metallic and substoichiometric phases is observed. No nickel peaks are seen on the surface after oxidation at 800 deg. C, however Fe(II) peak is noticed after 8 and 24 hours of steam exposure, which then disappears after 48 hours. This presence of FeCr{sub 2}O{sub 4} oxide phase is observed after 8 and 24 hours. After exposure to steam at 1000 deg. C, the Cr{sub 2}p{sub 3/2} doublet persists at all exposure times, indicating the presence of the FeCr{sub 2}O{sub 4} oxide. Nickel peak is found on the surface at all exposure times and is attributed to the presence of Ni(OH){sub 2} phase. This may be due to increased diffusion of Ni through chromic oxide scale at higher temperature as compared to 800 deg. C. This nickel reacts with steam at 1000 deg. C to form Ni hydroxide at the surface. For APMT, after exposure to steam at 800 and 1000 deg. C, no Al and Cr metal peaks are seen. Growth of oxide layer is seen with increase in exposure time. The oxide structure contains mainly Al{sub 2}O{sub 3} oxide with the addition of mixed oxide (Al{sub x}Cr{sub 1-x}){sub 2}O{sub 3}. These results demonstrate that Cr diffuses into the alumina layer. (authors)

36 MATERIALS SCIENCE↗

The effect of chrome adhesion layer on quartz resonator aging.

This SAND report documents a late start LDRD designed to determine the possible aging effects of a quartz resonator gold adhesion layer. Sandia uses quartz resonators for applications. These applications require a very stable frequency source with excellent aging (low drift) characteristics. These parts are manufactured by one of our qualified vendors outside Sandia Laboratories, Statek Corp. Over the years we, Sandia and the vendor, have seen aging variations that have not been completely explained by the typical mechanisms known in the industry. One theory was that the resonator metallization may be contributing to the resonator aging. This LDRD would allow us to test and analyze a group of resonators with known differentiating metallization and via accelerated aging determine if a chrome adhesion layer used to accept the final gold plating may contribute to poor aging. We worked with our main vendor to design and manufacture a set of quartz resonators with a wide range of metallization thickness ratios between the chrome and gold that will allow us determine the cause of this aging and which plating thickness ratios provide the best aging performance while not degrading other key characteristics.

42 ENGINEERING↗

Corrosion of Ferritic Steels in High Temperature Molten Salt Coolants for Nuclear Applications

Corrosion of ferritic steels in high temperature molten fluoride salts may limit the life of advanced reactors, including some hybrid systems that are now under consideration. In some cases, the steel may be protected through galvanic coupling with other less noble materials with special neutronic properties such a beryllium. This paper reports the development of a model for predicting corrosion rates for various ferritic steels, with and without oxide dispersion strengthening, in FLiBe (Li{sub 2}BeF{sub 4}) and FLiNaK (Li-Na-K-F) coolants at temperatures up to 800 C. Mixed potential theory is used to account for the protection of steel by beryllium, Tafel kinetics are used to predict rates of dissolution as a function of temperature and potential, and the thinning of the mass-transfer boundary layer with increasing Reynolds number is accounted for with dimensionless correlations. The model also accounts for the deceleration of corrosion as the coolants become saturated with dissolved chromium and iron. This paper also reports electrochemical impedance spectroscopy of steels at their corrosion potentials in high-temperature molten salt environments, with the complex impedance spectra interpreted in terms of the interfacial charge transfer resistance and capacitance, as well as the electrolyte conductivity. Such in situ measurement techniques provide valuable insight into the degradation of materials under realistic conditions.

42 ENGINEERING↗

Enhanced flow boiling heat transfer on chromium coated zircaloy-4 using cold spray technique for accident tolerant fuel (ATF) materials

Flow boiling heat transfer tests were conducted to evaluate the Critical Heat Flux (CHF) and Heat Transfer Coefficient (HTC) of conventional and accident tolerant fuel (ATF) cladding materials, i.e., bare Zircaloy-4 (Zr4), and Zircaloy-4 coated with Chromium using physical vapor deposition (PVD) (Zr4-Cr-PVD) and cold spray process (Zr4-Cr-CS), respectively. The tests were performed on a single heater rod with a uniform heat flux profile, at the atmospheric pressure, inlet temperature (24 °C) and mass flow rate (750 kg/m 2 s). HTC’s were increased by 5.2% and 3.3% on Zr4-Cr-CS compared to bare Zr4 and Zr4-Cr-PVD. Improved HTCwas attributed to the increased void fraction and high roughness (Ra = 532 nm) of the Zr4-Cr-CS. In detail, the micro-cavities, which act as bubble seeds, were entirely distributed on the Zr4-Cr-CS, and these micro-cavities generated smaller and faster bubbles, thus the void fraction increased by 10.9% compared to bare Zr4. HTC is improved by these smaller and faster bubbles which can remove heat from the heater rod surface more efficiently. To identify the exact location of CHF, the surface temperature profile was measured using advanced fiber-optic sensors which have high temporal/spatial resolution (distance between point to point: ~2.5 mm, frequency ~100 Hz). CHF occurred at 80–95% along the heated length and showed an 11.6% reduction on Zr4-Cr-CS compared to bare Zr4. We hypothesize the CHF reduction was caused by the lower wettability of the Zr4-Cr-CS which reduces the liquid supply to the surface, and vigorous bubble accumulation owing to high void fraction near the outlet, which results in early formation of the vapor film. During the post-CHF quenching phase, the rougher Zr4-Cr-CS showed larger cooling rates compared to the bare Zr4 and Zr4-Cr-PVD, preventing of oxidation by chromium layer. In conclusion, we demonstrate that the high roughness on the Zr4-Cr-CS increased the number of micro-cavities on the surface, resulting in 5.2% increase in HTC and improvement in the quenching heat transfer performance whereas CHF was 11.6% reduced compared to bare Zr4. Overall statistically there is little effect in the coating with regards to CHF and slight improvement in HTC.

42 ENGINEERING↗

Isotope anomalies in the FE-group elements in meteorites and connections to nucleosynthesis in AGB stars

We study the effects of neutron captures in AGB stars on “Fe-group” elements, with an emphasis on Cr, Fe, and Ni. These elements show anomalies in {sup 54}Cr, {sup 58}Fe, and {sup 64}Ni in solar system materials, which are commonly attributed to supernovae (SNe). However, as large fractions of the interstellar medium (ISM) were reprocessed in AGB stars, these elements were reprocessed, too. We calculate the effects of such reprocessing on Cr, Fe, and Ni through 1.5 M{sub ⊙} and 3 M{sub ⊙} AGB models, adopting solar and 1/3 solar metallicities. All cases produce excesses of {sup 54}Cr, {sup 58}Fe, and {sup 64}Ni, while the other isotopes are little altered; hence, the observations may be explained by AGB processing. The results are robust and not dependent on the detailed initial isotopic composition. Consequences for other “Fe group” elements are then explored. They include {sup 50}Ti excesses and some production of {sup 46,47,49}Ti. In many circumstellar condensates, Ti quantitatively reflects these effects of AGB neutron captures. Scatter in the data results from small variations (granularity) in the isotopic composition of the local ISM. For Si, the main effects are instead due to variations in the local ISM from different SN sources. The problem of Ca is discussed, particularly with regard to {sup 48}Ca. The measured data are usually represented assuming terrestrial values for {sup 42}Ca/{sup 44}Ca. Materials processed in AGB stars or sources with variable initial {sup 42}Ca/{sup 44}Ca ratios can give apparent {sup 48}Ca excesses/deficiencies, attributed to SNe. The broader issue of galactic chemical evolution is also discussed in view of the isotopic granularity in the ISM.

79 ASTRONOMY AND ASTROPHYSICS↗

Chemical and Microstructural Changes in Metallic and Ceramic Materials Exposed to Venusian Surface Conditions

The chemical and microstructural behavior of steels (304, 310, 316, and 1018), nickel-based alloys (beta-NiAl, G30, and 625), gold, coatings (4YSZ, SilcoNert(TradeMark) 1040 (SilcoTek Co.), Dursan(TradeMark) (SilcoTek Co.), and porcelain), and bulk ceramics (alpha-Al2O3, fused quartz, beta-SiC, and alpha-Si3N4) were probed after exposure to supercritical fluid with temperature, pressure, and composition mimicking the Venus lower atmosphere. Exposures were carried out in the Glenn Extreme Environments Rig (GEER) chamber with the Venusian gas mixture (96.5% CO2, 3.5% N2, 30 ppm H2O, 150 ppm SO2, 28 ppm CO, 15 ppm OCS, 3 ppm H2S, 0.5 ppm HCl, and 5 ppb HF) at 92 bar (1330 psi) and 467 C (873 F) for durations of 10 and 42 days. An additional 21-day exposure was done to stainless steel uncoated and coated with SilcoNert(TradeMark) and Dursan(TradeMark). Samples were characterized before and after the experiment by gravimetric analysis, X-ray diffraction, X-ray photoelectron and Auger electron spectroscopies, and cross section electron microscopy analysis. All steels exposed for 10 and 42 days formed double-layered scales consisting mainly of metal (Cr, Fe, Ni) oxides and sulfides showing different chemistry, microstructure, and crystalline phases. The alloys G30 and 625 formed double-layered scales consisting mainly of nickel sulfides. After 10 days, the beta-NiAl exhibited no detectable scale, suggesting only a very thin film was formed. The 304 and 316 stainless steels coated with 4YSZ that were exposed for 10 and 42 days exhibited no significant oxidation. Steel 1018 coated with 4YSZ exhibited a corrosion scale of iron and/or chromium oxide formed at the base of the alloy. The 304 steel coated with porcelain did not exhibit corrosion, although the coating exhibited recession. SilcoNert(TradeMark) exposed for 10 and 42 days exhibited recession, although no oxidation was found to occur at the base of the alloy. Stainless steel 316 coated with Dursan(TradeMark)  exhibited corrosion at the base of the alloy. All ceramics tested showed no clear evidence of reaction. The weight-gain-per-area performance of the materials exposed in the GEER for 10 and 42 days are reported from the lowest to the highest weight gain per area as follows: gold did not exhibit any weight change; nickel-based alloys: beta- NiAl < G30 < 625; steels: 304 < 310 < 316 < 1018; ceramics: considering the experimental uncertainties, no weight change was observed for all ceramics of this work (alpha-Al2O3, Si3N4, SiC, and amorphous SiO2).

Costa, Gustavo C. C.↗

High Throughput In-Line Coating Metrology Development for Solid Oxide Fuel Cell Manufacturing

Coatings play key roles in solid oxide fuel cell (SOFC) stack durability. For example, diffusion barrier coatings on Cr-containing interconnect and balance of plant (BOP) components protect electrodes from Cr poisoning over the long operational lifetimes (>10,000 hours) of the fuel cell stack. Common defects in coatings, such as cracks, pinholes, and porosity, result in a failure to protect the electrodes, resulting in shorter operational lifetime and thus higher cost. It is very unlikely, even in the best coating process, that all these defects can be mitigated, hence identifying critical defects in parts, and removing defective parts from production before they can damage the stack, becomes paramount. Furthermore, these quality control techniques must be operational in the production/assembly line (in-line), i.e., high throughput and non-destructive, and cost effective. Redox Power Systems, LLC (Redox) together with the National Renewable Energy Laboratory (NREL) developed much needed high throughput, in-line metrology techniques for protective coatings. The overall goal of the project is to lower cost while increasing robustness, reliability, and endurance of SOFC stacks. To accomplish this, we had several objectives, including: to identify key coating and substrate defects that lead to coating failure through the use of detailed characterization methods (e.g., microscopy, XRD, EDS, electrochemistry); to assess capabilities of in-line metrology techniques, e.g., optical profilometry (Redox) and thermography (NREL), to probe these defects, or evidence thereof; demonstrate long-term performance of “defect-free” protective coatings, as identified by in-line metrology, in solid oxide fuel cell (SOFC) stack operation. In the first part of this project, the ability to identify key defects expected to lead to coating and SOFC degradation using in-line metrology tools were evaluated. Coated interconnect samples with controlled defect types and populations were tested under conditions similar to SOFC operation, followed by detailed post-test analysis to reveal the defects responsible for observed degradation. In the second part of the project, the optimal in-line metrology techniques and methodologies were used to map the defect distribution in full-size interconnects with critical defects intentionally allowed to exist in some cases. These interconnects underwent SOFC testing for extended periods (up to ~3,000 hours) followed by post-test analysis to evaluate the effectiveness of in-line metrology techniques in mitigating MCO coating related degradation. Key accomplishments in this project included the following: Demonstrated ASR of < 0.05 ohm-cm 2 at 650 °C for 1,000 hours with low defect (determined by in-line metrology) interconnect samples (average ASR=37 milliohms-cm 2 after over 1,000 hours). Demonstrated that low defect coatings on interconnects (as screened using in-line metrology) have low volatilization of chromium at ~650 °C for 1,000 hours as detected using Cr-getter material (< 5 at% increase above baseline); 1022 hour duration tests under humidified, elevated temperature (750 °C rather than 650 °C) compared a base case against different coating thicknesses. Demonstrated capability to identify initial key defects of interest with in-line metrology techniques using up to 8 cm by 10 cm having coatings with and without intentional defects of interest using thermal imaging and optical profilometry. Correlated key defects identified using metrology techniques with observed coating performance (e.g., ASR and Cr volatility). Conducted several 4 cm by 4 cm cell tests using MCO-interconnects that were pre-screened using some of the metrology techniques developed in the project (e.g., optical profilometry). An analysis of ASR measurements were able to show that defect-free coatings resulted in the anticipated performance in the cell tests.

01 COAL, LIGNITE, AND PEAT↗