Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHLORINE 50”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nuclear Data Sheets for A=50

The experimental nuclear structure and decay data are evaluated for all the known nuclides of mass 50 (Cl, Ar, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni). Here, detailed evaluated nuclear structure information are presented in individual decay and reaction datasets and the best values are recommended in the Adopted dataset for level properties, γ and β radiations, and other spectroscopic information. No excited states are known in 50Cl and 50Ni, and limited information is available for 50 Ar, 50 K, 50 Fe and 50 Co. This work supersedes earlier evaluations of A=50 by 2011El01, 1995Bu09, 1990Bu18, 1984Al29, and 1976Au07.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 50

The experimental nuclear spectroscopic data for known nuclides of mass number 50 (Cl,Ar,K,Ca,Sc,Ti,V, Cr,Mn,Fe,Co,Ni) have been evaluated and presented together with Adopted properties for levels and {gamma} rays. This evaluation has been carried out about 15 years after the previous one by Thomas Burrows (1995Bu29). Except for {sup 50}Sc and {sup 50}V, extensive new data have become available for all the other nuclides in the intervening years. The data for {sup 50}Sc and {sup 50}V have also been checked again in detail and several changes made. No data are yet available for excited states in {sup 50}Cl, {sup 50}Ar and {sup 50}Ni. This work supersedes earlier evaluations (1995Bu29, 1990Bu18, 1984Al29, 1976Au07) of A=50 nuclides.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Observation of new neutron-rich isotopes at the NSCL

Recently, increased primary beam intensities at the National Superconducting Cyclotron Laboratory (NSCL) at Michigan State University and advances in experimental techniques allowed probing further into unknown regions of the table of the isotopes with fragmentation and in-flight fission reactions. Recent measurements at the NSCL have demonstrated that primary beams of {sup 48}Ca at 141 MeV/u and {sup 76}Ge at 132 MeV/u can be used to produce new isotopes {sup 40}Mg, {sup 42,43}Al, {sup 44}Si, {sup 52}Ar, {sup 50}Cl, {sup 52,53}Ar, {sup 55,56}K, {sup 57,58}Ca, {sup 59,60,61}Sc, {sup 62,63}Ti, {sup 65,66}V, {sup 68}Cr, {sup 70}Mn in the proximity of the neutron dripline. Also, experiments with {sup 238}U(81 MeV/u) and {sup 208}Pb(86 MeV/u) beams in order to measure production yields and possibly observe several neutron rich isotopes in the first time have recently been performed at the NSCL. A search for new neutron-rich isotopes with {sup 48}Ca and {sup 76}Ge beams was carried out using the recently developed two-stage fragment separator technique.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Production of very neutron-rich nuclei with a {sup 76}Ge beam

Production cross sections for neutron-rich nuclei from the fragmentation of a {sup 76}Ge beam at 132 MeV/u were measured. The longitudinal momentum distributions of 34 neutron-rich isotopes of elements 13{<=}Z{<=}27 were scanned using a novel experimental approach of varying the target thickness. Production cross sections with beryllium and tungsten targets were determined for a large number of nuclei, including 15 isotopes first observed in this work. These are the most neutron-rich nuclides of the elements 17{<=}Z{<=}25 ({sup 50}Cl, {sup 53}Ar, {sup 55,56}K, {sup 57,58}Ca, {sup 59,60,61}Sc, {sup 62,63}Ti, {sup 65,66}V, {sup 68}Cr, and {sup 70}Mn). A one-body Q{sub g} systematics is used to describe the production cross sections based on thermal evaporation from excited prefragments. Some of the fragments near {sup 58}Ca show anomalously large production cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

TaN metal gate etch mechanisms in BCl{sub 3}-based plasmas

TaN is a potential candidate for metal gates. BCl{sub 3}-based plasma is used to pattern metal gates because it has a high selectivity over Si substrate and capable of etching metal oxides (native oxides on metal gates and high-k dielectrics). During metal gate etch in inductively coupled plasma reactor, the authors found that the TaN metal gate profile depends on the composition of BCl{sub 3}-based plasma. Pure BCl{sub 3} results in an undercut of TaN. The undercut can be avoided by addition of 5%O{sub 2}, further increase in O{sub 2} concentration (until 10%) does not change the TaN profile. When N{sub 2} is added to BCl{sub 3} plasma, first the undercut disappears (at about 6% of N{sub 2}) and then a slope appears as N{sub 2} concentration increases further (toward 10%). It was found that the profile is controlled by a film deposited from BCl{sub 3}-based plasma. In the case of pure BCl{sub 3} plasma, the film consists of B (50%), Cl (30%), and O (20%). When 5% of O{sub 2} is added, no film is observed, but strong BO and BO{sub 2} peaks appear in the plasma emission spectra. When 5%N{sub 2} is added to the BCl{sub 3} plasma, again a film is deposited, but it contains less Cl (18%). Based on our research, the authors propose the following etch mechanism to explain the observed profile notching/footing. In pure BCl{sub 3} plasma, a B- and Cl-containing film is deposited on the sidewalls of the gate. Cl from this film will react with TaN producing an undercut. When O{sub 2} is added, no film is formed and the TaN profile is straight as B apparently reacts with O in the gas phase, forming volatile BO{sub x} species. Further increase of O{sub 2} content does not change the profile as no film is formed. When N{sub 2} is added to BCl{sub 3}, a film is formed but in this case N replaces Cl and the film becomes passivating leading to a straight TaN profile. As more N{sub 2} is added, the film passivates TaN more efficiently leading to a sloped profile.

36 MATERIALS SCIENCE↗

Octupole moment driven free charge generation in partially chlorinated subphthalocyanine for planar heterojunction organic photodetectors

In this study, high-performance organic photodetectors are presented which utilize a pristine chlorinated subphthalocyanine photoactive layer. Optical and optoelectronic analyses indicate that the device photocurrent is primarily generated through direct charge generation within the chlorinated subphthalocyanine layer, rather than exciton separation at layer interfaces. Molecular modelling suggests that this direct charge generation is facilitated by chlorinated subphthalocyanine high octupole moment (-80 DÅ 2 ), which generates a 200 meV shift in molecular energetics. Increasing the thickness of chlorinated subphthalocyanine leads to faster response time, correlated with a decrease in trap density. Notably, photodetectors with a 50 nm thick chlorinated subphthalocyanine photoactive layer exhibit detectivities approaching 10 13 Jones, with a dark current below 10 -7 A cm -2 up to -5 V. Based on these findings, we conclude that high octupole moment molecular semiconductors are promising materials for high-performance organic photodetectors employing single-component photoactive layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence for a Change in the Nuclear Mass Surface with the Discovery of the Most Neutron-Rich Nuclei with 17{<=}Z{<=}25

The results of measurements of the production of neutron-rich nuclei by the fragmentation of a {sup 76}Ge beam are presented. The cross sections were measured for a large range of nuclei including 15 new isotopes that are the most neutron-rich nuclides of the elements chlorine to manganese ({sup 50}Cl, {sup 53}Ar, {sup 55,56}K, {sup 57,58}Ca, {sup 59,60,61}Sc, {sup 62,63}Ti, {sup 65,66}V, {sup 68}Cr, {sup 70}Mn). The enhanced cross sections of several new nuclei relative to a simple thermal evaporation framework, previously shown to describe similar production cross sections, indicates that nuclei in the region around {sup 62}Ti might be more stable than predicted by current mass models and could be an indication of a new island of inversion similar to that centered on {sup 31}Na.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Synthetic Chlorins, Possible Surrogates for Chlorophylls, Prepared by Derivatization of Porphyrins

Chlorophylls make Earth green, are the central constituents in the engine of photosynthesis, and not surprisingly have garnered extensive attention. A chlorin, the core chromophore of a chlorophyll, is a dihydroporphyrin macrocycle that contains one pyrroline ring and three pyrrole rings. The dominant method for the synthesis of chlorins has entailed the derivatization of porphyrins. The present review covers the ostensibly simple conversion of porphyrins, regardless of synthetic or biological origin, to chlorins. The period covered encompasses the entire history since the beginnings of chlorin synthetic chemistry in the early 20th century through 2015. Representative transformations include hydrogenation, cycloaddition, annulation, and diverse “breaking and mending” approaches. Altogether, the synthesis of >1000 chlorins or chlorin-like compounds (containing >50 distinct pyrroline motifs) is described. Such diversity animates the question “what structural features are essential for a chlorin to resemble chlorophyll?” To begin to address the structure–spectrum relationship, > 250 absorption spectra are provided for representative structures. The synthesis and spectral properties of the vast collection of compounds described herein are expected to illuminate the scope to which synthetic chlorins can serve as surrogates for chlorophylls and be exploited in diverse ways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Macroscale properties and atomic-scale mechanisms of ash removal in low-temperature hydrothermal carbonization

Biogenic ash is a significant impediment to the utilization of agricultural residues in biofuel production. Such challenge can be addressed by various treatments, as demonstrated in this study on the experimental and computational mechanisms involved in the hydrothermal treatment (HT) of wheat straw. A combination of classical (all-atom) molecular dynamics simulations of cellulose carrying silica and calcium species, along with first principles quantum chemical calculations, indicates the dissociation of inorganics from the cellulose with increased HT temperature. Here, this observation is confirmed by experimental evidence of effective ash removal by HT, showing at least 50% removal of sulfur, chlorine, potassium, and calcium, and 12.5% of silica, leading to a reduced total ash content (from 6.7% to 4.2%).Changes in structural features upon HT, such as surface cellular structure and porosity, were revealed, accompanied by an increased specific surface area (from 1.17 to 6.34 m 2 /g). Our simulations suggest that silica binds tightly to the hydrophobic face of cellulose at room temperature, but HT significantly reduces the binding free energy of association with both hydrophobic and hydrophilic surfaces. Most significantly, ash removal leads to an increased calorific value, rising from approximately 16 MJ/kg to about 19 MJ/kg, along with improved thermal behavior. The improved integration combustion index parameter S indicates that the combustion properties improve with ash removal efficiency. The proposed atomic-level mechanism for the observed removal of inorganics during mild HT underscores the potential of such treatment in producing energy-dense wheat straw, a widely available agricultural residue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-Assembled Light-Harvesting System from Chromophores in Lipid Vesicles

Lipid vesicles are used as the organizational structure of self-assembled light-harvesting systems. Following analysis of 17 chromophores, six were selected for inclusion in vesicle-based antennas. The complementary absorption features of the chromophores span the near-ultraviolet, visible, and near-infrared region. Although the overall concentration of the pigments is low (~1 μ M for quantitative spectroscopic studies) in a cuvette, the lipid-vesicle system affords high concentration (≥10 mM) in the bilayer for efficient energy flow from donor to acceptor. Energy transfer was characterized in 13 representative binary mixtures using static techniques (fluorescence–excitation versus absorptance spectra, quenching of donor fluorescence, modeling emission spectra of a mixture versus components) and time-resolved spectroscopy (fluorescence, ultrafast absorption). Binary donor–acceptor systems that employ a boron-dipyrrin donor (S 0 ↔ S 1 absorption/emission in the blue-green) and a chlorin or bacteriochlorin acceptor (S 0 ↔ S 1 absorption/emission in the red or near-infrared) have an average excitation-energy-transfer efficiency (Φ EET ) of ~50%. Binary systems with a chlorin donor and a chlorin or bacteriochlorin acceptor have Φ EET ~ 85%. The differences in Φ EET generally track the donor-fluorescence/acceptor-absorption spectral overlap within a dipole–dipole coupling (Förster) mechanism. Substantial deviation from single-exponential decay of the excited donor (due to the dispersion of donor–acceptor distances) is expected and observed. The time profiles and resulting Φ EET are modeled on the basis of (Förster) energy transfer between chromophores relatively densely packed in a two-dimensional compartment. Initial studies of two ternary and one quaternary combination of chromophores show the enhanced spectral coverage and energy-transfer efficacy expected on the basis of the binary systems. Collectively, this approach may provide one of the simplest designs for self-assembled light-harvesting systems that afford broad solar collection and efficient energy transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mercury emissions during cofiring of sub-bituminous coal and biomass (chicken waste, wood, coffee residue, and tobacco stalk) in a laboratory-scale fluidized bed combustor

Four types of biomass (chicken waste, wood pellets, coffee residue, and tobacco stalks) were cofired at 30 wt % with a U.S. sub-bituminous coal (Powder River Basin Coal) in a laboratory-scale fluidized bed combustor. A cyclone, followed by a quartz filter, was used for fly ash removal during tests. The temperatures of the cyclone and filter were controlled at 250 and 150{sup o}C, respectively. Mercury speciation and emissions during cofiring were investigated using a semicontinuous mercury monitor, which was certified using ASTM standard Ontario Hydra Method. Test results indicated mercury emissions were strongly correlative to the gaseous chlorine concentrations, but not necessarily correlative to the chlorine contents in cofiring fuels. Mercury emissions could be reduced by 35% during firing of sub-bituminous coal using only a quartz filter. Cofiring high-chlorine fuel, such as chicken waste (Cl = 22340 wppm), could largely reduce mercury emissions by over 80%. When low-chlorine biomass, such as wood pellets (Cl = 132 wppm) and coffee residue (Cl = 134 wppm), is cofired, mercury emissions could only be reduced by about 50%. Cofiring tobacco stalks with higher chlorine content (Cl = 4237 wppm) did not significantly reduce mercury emissions. Gaseous speciated mercury in flue gas after a quartz filter indicated the occurrence of about 50% of total gaseous mercury to be the elemental mercury for cofiring chicken waste, but occurrence of above 90% of the elemental mercury for all other cases. Both the higher content of alkali metal oxides or alkali earth metal oxides in tested biomass and the occurrence of temperatures lower than 650{sup o}C in the upper part of the fluidized bed combustor seemed to be responsible for the reduction of gaseous chlorine and, consequently, limited mercury emissions reduction during cofiring. 36 refs., 3 figs. 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Synthesis and characterization of nano crystalline nickel zinc ferrite for chlorine gas sensor at room temperature

Nano crystalline Nickel Zinc ferrite (Ni{sub 0.25}Zn{sub 0.75}Fe{sub 2}O{sub 4}) thin films were synthesized by Sol Gel method for gas response. The phase and microstructure of the obtained Ni{sub 0.25}Zn{sub 0.75}Fe{sub 2}O{sub 4} thin films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM). The nanostructured Ni{sub 0.25}Zn{sub 0.75}Fe{sub 2}O{sub 4} thin film shows single spinel phase. Magnetic study was obtained with the help of VSM. The effects of working temperature on the gas response were studied. The results reveal that the Ni{sub 0.25}Zn{sub 0.75}Fe{sub 2}O{sub 4} thin film gas sensor shows good selectivity to chlorine gas at room temperature. The sensor shows highest sensitivity (∼50%) at room temperature, indicating its application in detecting chlorine gas at room temperature in the future.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Isochoric heating of reduced mass targets by ultra-intense laser produced relativistic electrons

We present measurements of the chlorine K-alpha emission from reduced mass targets, irradiated with ultra-high intensity laser pulses. Chlorinated plastic targets with diameters down to 50 micrometers and mass of a few 10{sup -8} g were irradiated with up to 7 J of laser energy focused to intensities of several 10{sup 19} W/cm{sup 2}. The conversion of laser energy to K-alpha radiation is measured, as well as high resolution spectra that allow observation of line shifts, indicating isochoric heating of the target up to 18 eV. A zero-dimensional 2-temperature equilibration model, combined with electron impact K-shell ionization and post processed spectra from collisional radiative calculations reproduces the observed K-alpha yields and line shifts, and shows the importance of target expansion due to the hot electron pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A novel protocol to recycle zirconium from zirconium alloy cladding from used nuclear fuel rods

A potential new zirconium recycling protocol has been demonstrated using unirradiated Zircaloy-based claddings and depleted uranium oxide for the chemical removal of zirconium alloy cladding in used nuclear fuel (UNF) rods from light water reactors. This protocol is based on the application of three new scientific findings. First, a new lower temperature chlorination reaction of zirconium with sulfur monochloride is described. Second, the high solubility of zirconium chloride in thionyl chloride is used to separate it from uranium oxide fuel and fission and activation contaminants. Finally, in the third step, the zirconium chloride is purified by simple recrystallization from thionyl chloride. Utilizing sulfur chloride solvents for a lower temperature liquid-based chemical digestion and purification of zirconium alloy claddings reduces technical complications experienced by current high temperature gas phase chlorination strategies, such as contamination of product streams. This novel protocol has been demonstrated on a 3–50 g scale of unirradiated zirconium alloy, with no significant change in the time required for complete chlorination (3–4 h). This zirconium chlorination protocol has also been performed in the presence of depleted uranium oxide pellets. The depleted fuel pellets do not affect zirconium chlorination, and the chlorination protocol does not chemically or physically alter the fuel pellets. Finally, a preliminary description of an industrial protocol to recycle nuclear grade zirconium from UNF rods is presented.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Plasma etching of Hf-based high-k thin films. Part II. Ion-enhanced surface reaction mechanisms

The mechanism for ion-enhanced chemical etching of hafnium aluminate thin films in Cl{sub 2}/BCl{sub 3} plasmas was investigated in this work, specifically how the film composition, ion energy, and plasma chemistry determine their etch rates. Several compositions of Hf{sub 1-x}Al{sub x}O{sub y} thin films ranging from pure HfO{sub 2} to pure Al{sub 2}O{sub 3} were etched in BCl{sub 3}/Cl{sub 2} plasmas and their etch rates were found to scale with {radical}(E{sub ion}) in both Cl{sub 2} and BCl{sub 3} plasmas. In Cl{sub 2} plasmas, a transition point was observed around 50 eV, where the etch rate was significantly enhanced while the linear dependence to {radical}(E{sub ion}) was maintained, corresponding to a change in the removal of fully chlorinated to less chlorinated reaction products. In BCl{sub 3} plasma, deposition dominates at ion energies below 50 eV, while etching occurs above that energy with an etch rate of three to seven times that in Cl{sub 2}. The faster etch rate in BCl{sub 3} was attributed to a change in the dominant ion from Cl{sub 2}{sup +} in Cl{sub 2} plasma to BCl{sub 2}{sup +} in BCl{sub 3}, which facilitated the formation of more volatile etch products and their removal. The surface chlorination (0-3 at. %) was enhanced with increasing ion energy while the amount of boron on the surface increases with decreasing ion energy, highlighting the effect of different plasma chemistries on the etch rates, etch product formation, and surface termination.

36 MATERIALS SCIENCE↗

Chloride chemical form in various types of fly ash

Chloride content is a critical problem for the reuse of fly ash as a raw material in cement, and the method used by recyclers to reduce the fly ash chloride content depends on the chemical form of the chlorides. However, limited information is available on the quantitative distribution of chlorides and the identity of some chlorides such as Friedel's salt. We examined chloride forms and percentages using X-ray absorption near edge structure and X-ray diffraction analyses, as well as corresponding washing experiments. Approximately 15% of the chlorine in raw fly ash was estimated to be in the form of NaCl, 10% in KCl, 50% in CaCl{sub 2}, and the remainder in the form of Friedel's salt. Fly ash collected in a bag filter with the injection of calcium hydroxide for acid gas removal (CaFA) contained 35% chlorine as NaCl, 11% as KCl, 37% as CaCl{sub 2}, 13% as Friedel's salt, and the remaining 4% as CaClOH. In fly ash collected in a bag filter with the injection of sodium bicarbonate for acid gas removal (NaFA), approximately 79% of chlorine was in NaCl, 12% was in KCl, and 9% was in Friedel's salt. 25 refs., 4 figs., 4 tabs.

01 COAL, LIGNITE, AND PEAT↗

Advanced Low-Temperature Chlorination of Zirconium

Recovery of Zr from nuclear fuel is of high interest because the Zr cladding material comprises up to 50% of the high-level radioactive waste (HLW) that requires disposition. An ideal Zr-recovery process would not only recover the bulk Zr from the fuel or cladding but would also provide decontamination from the components that give rise to the HLW designation. A simplified decontamination pathway providing recovered Zr in compliance with low-level radioactive waste acceptance criteria could significantly reduce the burden of HLW requiring geologic disposition. A newly developed advanced low-temperature chlorination process presents an opportunity to recover a ZrCl4 product that is effectively decontaminated from the elements of concern. This advanced low-temperature chlorination process uses a mixture of the sulfur-containing chlorination compounds sulfur monochloride (S 2 Cl 2 ) and thionyl chloride (SOCl 2 ).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Experimental investigation of the quality characteristics of agricultural plastic wastes regarding their recycling and energy recovery potential

Highlights: Black-Right-Pointing-Pointer Definition of parameters characterising agricultural plastic waste (APW) quality. Black-Right-Pointing-Pointer Analysis of samples to determine APW quality for recycling or energy recovery. Black-Right-Pointing-Pointer Majority of APW samples from various countries have very good quality for recycling. Black-Right-Pointing-Pointer Upper limit of 50% w/w soil contamination in APW acceptable for energy recovery. Black-Right-Pointing-Pointer Chlorine and heavy metals content in APW below the lowest limit for energy recovery. - Abstract: A holistic environmentally sound waste management scheme that transforms agricultural plastic waste (APW) streams into labelled guaranteed quality commodities freely traded in open market has been developed by the European research project LabelAgriWaste. The APW quality is defined by the APW material requirements, translated to technical specifications, for recycling or energy recovery. The present work investigates the characteristics of the APW quality and the key factors affecting it from the introduction of the virgin product to the market to the APW stream reaching the disposer. Samples of APW from different countries were traced from their application to the field through their storage phase and transportation to the final destination. The test results showed that the majority of APW retained their mechanical properties after their use preserving a 'very good quality' for recycling in terms of degradation. The degree of soil contamination concerning the APW recycling and energy recovery potential fluctuates depending on the agricultural plastic category and application. The chlorine and heavy metal content of the tested APW materials was much lower than the maximum acceptable limits for their potential use in cement industries.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗