Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHARGE TO DIGITAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Implementation and analysis of an innovative digital charge amplifier for hysteresis reduction in piezoelectric stack actuators

Smart actuators are the key components in a variety of nanopositioning applications, such as scanning probe microscopes and atomic force microscopes. Piezoelectric actuators are the most common smart actuators due to their high resolution, low power consumption, and wide operating frequency but they suffer hysteresis which affects linearity. In this paper, an innovative digital charge amplifier is presented to reduce hysteresis in piezoelectric stack actuators. Compared to traditional analog charge drives, experimental results show that the piezoelectric stack actuator driven by the digital charge amplifier has less hysteresis. It is also shown that the voltage drop of the digital charge amplifier is significantly less than the voltage drop of conventional analog charge amplifiers.

36 MATERIALS SCIENCE↗

Study of digital charge coupled devices

Charge coupled devices represent unique usage of the metal oxide semiconductor concept. These devices can sample an AC signal at the input, transfer charge proportional to this signal through the CCD shift register and then provide an output of the same frequency and shape as the input. The delay time between input and output is controlled by the CCD operating frequency and the number of stages in the shift resistor. This work is a reliability evaluation of the buried channel and surface channel CCD technologies. The constructions are analyzed, failure modes are described, and test results are reported.

Wilson, D. D.↗

Study of Two Digital Charge-Coupled Devices

Recent report describes reliability study of two charge-coupled-device (CCD) shift registers. Major objective of study was to establish methodology for selecting, testing, screening, derating and applying CCD's. Includes a discussion of CCD structures and operating principles. Characteristics of SCCD and BCCD types are compared.

Wilson, D. D.↗

Modular Battery Charge Controller

A new approach to masterless, distributed, digital-charge control for batteries requiring charge control has been developed and implemented. This approach is required in battery chemistries that need cell-level charge control for safety and is characterized by the use of one controller per cell, resulting in redundant sensors for critical components, such as voltage, temperature, and current. The charge controllers in a given battery interact in a masterless fashion for the purpose of cell balancing, charge control, and state-of-charge estimation. This makes the battery system invariably fault-tolerant. The solution to the single-fault failure, due to the use of a single charge controller (CC), was solved by implementing one CC per cell and linking them via an isolated communication bus [e.g., controller area network (CAN)] in a masterless fashion so that the failure of one or more CCs will not impact the remaining functional CCs. Each micro-controller-based CC digitizes the cell voltage (V(sub cell)), two cell temperatures, and the voltage across the switch (V); the latter variable is used in conjunction with V(sub cell) to estimate the bypass current for a given bypass resistor. Furthermore, CC1 digitizes the battery current (I1) and battery voltage (V(sub batt) and CC5 digitizes a second battery current (I2). As a result, redundant readings are taken for temperature, battery current, and battery voltage through the summation of the individual cell voltages given that each CC knows the voltage of the other cells. For the purpose of cell balancing, each CC periodically and independently transmits its cell voltage and stores the received cell voltage of the other cells in an array. The position in the array depends on the identifier (ID) of the transmitting CC. After eight cell voltage receptions, the array is checked to see if one or more cells did not transmit. If one or more transmissions are missing, the missing cell(s) is (are) eliminated from cell-balancing calculations. The cell-balancing algorithm is based on the error between the cell s voltage and the other cells and is categorized into four zones of operation. The algorithm is executed every second and, if cell balancing is activated, the error variable is set to a negative low value. The largest error between the cell and the other cells is found and the zone of operation determined. If the error is zero or negative, then the cell is at the lowest voltage and no balancing action is needed. If the error is less than a predetermined negative value, a Cell Bad Flag is set. If the error is positive, then cell balancing is needed, but a hysteretic zone is added to prevent the bypass circuit from triggering repeatedly near zero error. This approach keeps the cells within a predetermined voltage range.

Button, Robert↗

Investigation of the dynamic range problem and providing software support for the AOL system

The present scheme for providing system timing for the airborne oceanographic lidar (AOL) system is not completely satisfactory. The possibility of using a digital approach to generate the forty pulses needed to energize the gates leading to the charge digitizers was investigated. The solution in terms of general analog and digital circuitry is straightforward. The crystal oscillator provides a stable frequency source which is used as a clock to the ring counter. The ring counter propagates a pulse from stage one to stage forty. Each of the outputs has an amplifier for isolation. This design is easy to implement in the frequency range up to 50 MHZ. Because a gate pulse width of from about 2 to 6 ns is needed for the AOL system, this dictates an input clock frequency to the shift register of from 100 MHA to 500 MHA. Problems associated with generating pulses in this range of operation are examined and an alternate solution is discussed.

Source record↗

Study of sub-pixel position resolution with time-correlated transient signals in 3D pixelated CdZnTe detectors with varying pixel sizes

Here, we evaluated the sub-pixel position resolution achievable in large-volume CdZnTe pixelated detectors with conventional pixel patterns and for several different pixel sizes: 2.8 mm, 1.72 mm, 1.4 mm and 0.8 mm. Achieving position resolution below the physical dimensions of pixels (sub-pixel resolution) is a practical path for making high-granularity position-sensitive detectors, <100 μμm, using a limited number of pixels dictated by the mechanical constraints and multi-channel readout electronics. High position sensitivity is important for improving the imaging capability of CZT gamma cameras. It also allows for making more accurate corrections of response non-uniformities caused by crystal defects, thus enabling use of standard-grade (unselected) and less expensive CZT crystals for producing large-volume position-sensitive CZT detectors feasible for many practical applications. We analyzed the digitized charge signals from a representative 9 pixels and the cathode, generated using a pulsed-laser light beam focused down to 10 m (650 nm) to scan over a selected 3×3 pixel area. We applied our digital pulse processing technique to the time-correlated signals captured from adjacent pixels to achieve and evaluate the capability for sub-pixel position resolution. As an example, we also demonstrated an application of 3D corrections to improve the energy resolution and positional information of the events for the tested detectors.

36 MATERIALS SCIENCE↗

Comparison of analog and digital pulse-shape-discrimination systems

Pulse shape discrimination (PSD) performance of two optimized PSD systems (one digital and one analog) is compared in this work. One system uses digital charge integration, while the other system uses analog zero crossing. Measurements were conducted with each PSD system using the CAEN V1720 (250 MHz) data acquisition system. An organic-liquid scintillator, coupled to a photo-multiplier tube, was used to detect neutrons and gamma rays from a Cf-252 spontaneous-fission source. The PSD perfor-mance of both systems was optimized and quantified using a traditional figure-of-merit (FOM) approach. FOM's were found for three, 300 keVee light-output bins, spanning from 100 to 1000 keVee, and one larger bin from 100 to 1800 keVee. Digital PSD outperformed analog PSD in the lowest light-output bin by approximately 50%, and by 11% for the highest light-output bin.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Sens-Tech XDAS Readout System

In December 2010, the old British Phototube manufacture, EMI, called about their new product -after the company changed its name. The system they are marketing is very suitable for our use, digitizing charge from the detector in the beam line. Their system was capable of a large number of channels. Initially, we were offered a system based on integration with CCD readout. It is called the HE system. After many exchanges we bought a 64-channel system. It came pre assembled.

43 PARTICLE ACCELERATORS↗

Window-integrated charge-mode digital-to-analog converter for arbitrary waveform generator

A digital-to-analog converter circuit that creates an analog waveform from an input digital waveform. Operating the circuit comprises using the input digital waveform to 1) operate a charge control switch to set a charge time period, 2) operate a discharge control switch to set a discharge time period, 3) set a charge current magnitude using a charge gain, and 4) set a discharge current magnitude using a discharge gain. A charge source electrically charges a load capacitor during the charge time period (i.e., the charge mode). A discharge source electrically discharges the load capacitor during the discharge time period (i.e., the discharge mode). A circuit output transmits the analog waveform defined by the charge mode and the discharge mode. A charge current magnitude greater than the discharge current magnitude produces an upward-sloping analog waveform. A charge current magnitude less than the discharge current magnitude produces a downward-sloping analog waveform.

Li, Shaorui↗

Massively parallel neurocomputing for aerospace applications

An innovative hybrid, analog-digital charge-domain technology, for the massively parallel VLSI implementation of certain large scale matrix-vector operations, has recently been introduced. It employs arrays of Charge Coupled/Charge Injection Device cells holding an analog matrix of charge, which process digital vectors in parallel by means of binary, non-destructive charge transfer operations. The impact of this technology on massively parallel processing is discussed. Fundamentally new classes of algorithms, specifically designed for this emerging technology, as applied to signal processing, are derived.

Fijany, Amir↗

Massively Parallel Neurocomputing for Aerospace Applications

An innovative hybrid, analog-digital charge-domain technology, for the massively parallel VLSI implementation of certain large scale matrix-vector operations, has recently been introduced. It employs arrays of Charge Coupled/Charge Injection Device cells holding an analog matrix of charge, which process digital vectors in parallel by means of binary, non-destructive charge transfer operations. The impact of this technology on massively parallel processing is discussed.

massively↗

Negative string tension of a higher-charge Schwinger model via digital quantum simulation

We study some properties of generalized global symmetry for the charge- q Schwinger model in the Hamiltonian formalism, which is the (1 + 1)D quantum electrodynamics with a charge- q Dirac fermion. This model has the |$\mathbb {Z}_q\, 1$| -form symmetry, which is a remnant of the electric |$U(1)\, 1$| -form symmetry in the pure Maxwell theory. It is known that, if we put the theory on closed space, then the Hilbert space is decomposed into q distinct sectors, called universes, and some states with higher energy density do not decay to the ground state due to the selection rule of the 1-form symmetry. Even with open boundaries, we can observe the stability of such states by seeing a negative string tension behavior, meaning that opposite charges repel each other. In order to see negative string tensions, the vacuum angle θ has to be large enough and the standard path-integral Monte Carlo method suffers from the sign problem. We develop a method based on the adiabatic state preparation to see this feature with digital quantum simulation and confirm it using a classical simulator of quantum devices. In particular, we measure the local energy density and see how it jumps between the inside and outside of the insertion of the probe charges. We explicitly see that the energy density inside is lower than that outside. This is a clear signature of the negative string tension.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Charge integration successive approximation analog-to-digital converter for focal plane applications using a single amplifier

An analog-to-digital converter for on-chip focal-plane image sensor applications. The analog-to-digital converter utilizes a single charge integrating amplifier in a charge balancing architecture to implement successive approximation analog-to-digital conversion. This design requires minimal chip area and has high speed and low power dissipation for operation in the 2-10 bit range. The invention is particularly well suited to CMOS on-chip applications requiring many analog-to-digital converters, such as column-parallel focal-plane architectures.

Zhou, Zhimin↗

Digital system upset. The effects of simulated lightning-induced transients on a general-purpose microprocessor

Flight critical computer based control systems designed for advanced aircraft must exhibit ultrareliable performance in lightning charged environments. Digital system upset can occur as a result of lightning induced electrical transients, and a methodology was developed to test specific digital systems for upset susceptibility. Initial upset data indicates that there are several distinct upset modes and that the occurrence of upset is related to the relative synchronization of the transient input with the processing sate of the digital system. A large upset test data base will aid in the formulation and verification of analytical upset reliability modeling techniques which are being developed.

Belcastro, C. M.↗