SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The 1996 evaluation for the A=127 mass chain (1996Ki01) has been revised. The experimental results from various decays and reactions for the A=127 mass chain have been compiled and evaluated. The nuclides covered in this evaluation are from {sup 127}Ag to {sup 127}Nd. The data are summarized and presented, together with adopted level schemes.
In this study, production rates of {sup 125,123}Xe and {sup 133,131,129,128}Ba medical isotopes produced by {sup 127}I(p, 3n){sup 125}Xe, {sup 127}I(p, 5n){sup 123}Xe, {sup 133}Cs(p, n){sup 133mg}Ba, {sup 133}Cs(p, 3n){sup 131mg}Ba, {sup 133}Cs(p, 5n){sup 129}Ba, and {sup 133}Cs(p, 6n){sup 128}Ba reactions have been investigated up to 100 MeV incident proton energy. The preequilibrium calculations involve the hybrid model, the geometry-dependent hybrid model and the cascade exciton model. The calculated results are compared with the experimental data taken from the literature.
Transition metal doped cesium lead halide (CsPbI{sub 3}) perovskite compounds were studied for application in photovoltaic solar cells. Electronic structures, chemical shifts of {sup 207}Pb and {sup 127}I-NMR, vibration modes in infrared and Raman spectra of transition metals (Mn{sup 2+}, Fe{sup 2+} or Cu{sup 2+})-doped CsPbI{sub 3} perovskite compounds were studied by the first-principles calculation using density functional theory. The CsPb(Fe)I{sub 3} perovskite crystals had a slight perturbation of crystal field in the coordination structure. The electron density distribution was delocalized on the 5p orbital of I atom, the 3d orbital of Fe atom and the 6p orbital of Pb atom. The first excited process was based on ligand metal charge transfer from the 5p orbital on I atom to the 3d orbital of Fe atom. The chemical shifts of {sup 127}I-NMR were associated with the electron correlation of electron-nuclear spin interaction and nuclear quadrupole interactions based on electron field graduate. The asymmetric vibrations of Pb–I bonds stretching mode related to electron conductivity with scattering of the carrier diffusion as phonon effectiveness. The slight perturbation of the coordination structure in the CsPb(Fe)I{sub 3} perovskite crystal will improve the photovoltaic and optical properties.
Waste tanks at the nuclear facility located at Sellafield, UK, represent a nuclear source which could release radionuclides to the atmosphere. A model chain which combines atmospheric transport, deposition as well as riverine transport to sea has been developed to predict the riverine activity concentrations of {sup 137}Cs. The source term was estimated to be 9 × 10{sup 4} TBq of {sup 137}Cs, or 1% of the assumed total {sup 137}Cs inventory of the HAL (Highly Active Liquid) storage tanks. Air dispersion modelling predicted {sup 137}Cs deposition reaching 127 kBq m{sup −2} at the Vikedal catchment in Western Norway. Thus, the riverine transport model predicted that the activity concentration of {sup 137}Cs in water at the river outlet could reach 9000 Bq m{sup −3} in the aqueous phase and 1000 Bq kg{sup −1} in solid phase at peak level. The lake and river reaches showed different transport patterns due to the buffering effects caused by dilution and slowing down of water velocity.
Lead-halide perovskites increasingly mesmerize researchers because they exhibit a high degree of structural defects and dynamics yet nonetheless offer an outstanding (opto)electronic performance on par with the best examples of structurally stable and defect-free semiconductors. This highly unusual feature necessitates the adoption of an experimental and theoretical mindset and the reexamination of techniques that may be uniquely suited to understand these materials. Surprisingly, the suite of methods for the structural characterization of these materials does not commonly include nuclear magnetic resonance (NMR) spectroscopy. The present study showcases both the utility and versatility of halide NMR and NQR (nuclear quadrupole resonance) for probing the structure and structural dynamics of CsPbX 3 (X = Cl, Br, I), in both bulk and nanocrystalline forms. The strong quadrupole couplings, which originate from the interaction between the large quadrupole moments of, e.g., the 35 Cl, 79 Br, and 127 I nuclei, and the local electric-field gradients, are highly sensitive to subtle structural variations, both static and dynamic. The quadrupole interaction can resolve structural changes with accuracies commensurate with synchrotron X-ray diffraction and scattering. It is shown that space-averaged site-disorder is greatly enhanced in the nanocrystals compared to the bulk, while the dynamics of nuclear spin relaxation indicates enhanced structural dynamics in the nanocrystals. The findings from NMR and NQR were corroborated by ab initio molecular dynamics, which point to the role of the surface in causing the radial strain distribution and disorder. These findings showcase a great synergy between solid-state NMR or NQR and molecular dynamics simulations in shedding light on the structure of soft lead-halide semiconductors.
Los Alamos National Laboratory radiological facilities produce low-density room trash that, in many cases, is not contaminated with radioactivity. It has been estimated that 50 to 90% of low-density room trash is free of radioactive contamination and eligible for inclusion in LANL's Green is Clean (GIC) program. The GIC program is a verification program for non-regulated waste from radiation controlled areas that has been actively segregated as nonradioactive through the use of the waste generator's acceptable knowledge. The GIC program has employed two large area Phoswich gamma ray detector systems (HERCULES and ZEUS) to assay and verify that GIC candidate waste meets free release disposal requirements. The large area (127 cm{sup 2}) Phoswich detectors consist of a thin NaI front crystal (3 mm thick) that is optically coupled to a thick CsI back crystal (50 mm thick). The crystals are set in an oxygen-free high-conductivity copper housing with a very thin (0.025 mm) aluminum entrance window. The scintillation properties of the two crystals are different enough to allow the system's electronic components to identify the origin of any pulse. The original systems utilize Nuclear Instrumentation Module (NIM) electronics to process the detector signals. These electronic modules provide the buffering, amplification, and pulse shape analyzer needed for the proper presentation of signals to the custom Phosmux router module. The router module separates the sodium iodide and cesium iodide signals by their rise times and transfers this information into the computer-mounted multichannel analyzer, a Canberra Model S-100 system. While these NIM Bin counting electronics configurations have been effective for approximately 20 years of operation, they are bulky requiring numerous modules per detector and the important Phosmux module is no longer manufactured by LANL. Modern advancement of commercial counting electronics now offer more compact options for equivalent detector signal processing. A pulse shape discriminator module, the DGF Pixie-4, made by XIA LLC, has been identified that can replace the majority of the original NIM bin electronics in a much more compact chassis - one Pixie-4 replaces four NIM amplifiers and four NIM PSAs and fits in a small National Instruments{sup TM} chassis. Thus, LANL has initiated a system upgrade project to replace the historic NIM electronics with the XIA Pixie4 and associated configuration software. The hardware for one Phoswich systems has been procured for the project and the configuration software, customized for the LANL Phoswich detector application, has been written by the manufacturer. Initial setup and optimization of the Pixie-4 configuration has been performed. Qualitative and quantitative baseline comparisons to the NIM electronics has been performed. Good agreement of key low energy gamma lines between the systems has allowed 'Proof of Concept' to be concluded. Further optimization and performance evaluations are in progress. Modifications to the LabVIEW{sup TM} based operating software (originally written by VI Control Systems Ltd.) are being performed by a LANL LabVIEW{sup TM} programmer to accommodate the electronics upgrade. A new LabVIEW{sup TM} interface to control the Pixie-4 has already been developed. Final optimization and testing, formal software QA, and revisions to operating procedures are in progress to achieve completion of the GIC system upgrade project. (authors)
A large new family of rare-earth metal-cadmium-germanides RE{sub 2}CdGe{sub 2} (RE=Y, Pr, Nd, Sm, Gd-Yb) has been synthesized and structurally characterized. All eleven structures have been established from single-crystal X-ray diffraction data and have been found to belong to the tetragonal Mo{sub 2}FeB{sub 2} structure type (ordered ternary variant of the U{sub 3}Si{sub 2} structure type-space group P4/mbm (No. 127), Z=2; Pearson symbol tP10). The structural variations among the three series of isostructural RE{sub 2}MgGe{sub 2}, RE{sub 2}InGe{sub 2}, and RE{sub 2}CdGe{sub 2} compounds are discussed, as well as the crystal chemistry changes as a function of the decreasing size of the rare-earth metals (lattice constants a=7.176(2)-7.4589(12) A and c=4.1273(14)-4.4356(13) A). The experimental results have been complemented by tight-binding linear muffin-tin orbital (TB-LMTO) electronic structure calculations. - Graphical abstract: More than 300 compounds have been reported to crystallize with the tetragonal U{sub 3}Si{sub 2} structure type, or the Mo{sub 2}FeB{sub 2} structure type, which is its ordered ternary variant. Among them, there are several large RE{sub 2}CdX{sub 2} classes, where the X-elements are typically late transition metals such as Cu, Ni, Au, Pd, Pt, and Rh. The new RE{sub 2}CdGe{sub 2} phases (RE=Y, Pr, Nd, Sm, Gd-Yb) increase the diversity and represent the first cadmium germanides. Highlights: Black-Right-Pointing-Pointer RE{sub 2}CdGe{sub 2} (RE=Y, Pr, Nd, Sm, Gd-Yb) are new ternary germanides. Black-Right-Pointing-Pointer Their structures can be recognized as a 1:1 intergrowth of CsCl- and AlB{sub 2}-like slabs. Black-Right-Pointing-Pointer The Ge atoms are covalently bound into Ge{sub 2} dumbbells. Black-Right-Pointing-Pointer Almost all RE{sub 2}CdGe{sub 2} phases are the first structurally characterized phases in the respective ternary RE-Cd-Ge systems.
Los Alamos National Laboratory (LANL) radiological facilities produce low-density room trash that, in many cases, is not contaminated with radioactivity. It has been estimated that 50 to 90% of low-density room trash is free of radioactive contamination and eligible for inclusion in LANL's Green is Clean (GIC) program. The GIC program is a verification program for non-regulated waste from radiation controlled areas that has been actively segregated as nonradioactive through the use of the waste generator's acceptable knowledge. The GIC program has employed two large area Phoswich gamma ray detector systems (HERCULES and ZEUS) to verify that GIC candidate low-density waste contains no radioactivity above background. The large area (127 cm{sup 2}) Phoswich detectors consist of a thin NaI front crystal (3 mm thick) that is optically coupled to a thick CsI back crystal (50 mm thick). The scintillation properties of the two crystals are different enough to allow the system's electronic components to identify the origin of any pulse. The original systems utilize Nuclear Instrumentation Module (NIM) electronics to process the detector signals. The electronics currently in use by the systems are out of date and some components are no longer manufactured. In 2015, phase I upgrades to the GIC detector systems were completed. Phase I objectives included identifying more modern commercially available electronics that could replace the NIM electronics. A pulse shape discriminator (PSD) module, the Digital Gamma Finder (DGF) Pixie-4 made by XIA LLC, that fits in a compact National Instruments{sup TM} PXI chassis was identified to replace the majority of the original NIM bin electronics - a single Pixie-4 module replaces four NIM amplifiers and four NIM pulse shape analyzers (PSAs). Another phase I objective was to show that that new PSD could separate out the NaI and CsI detector signals in a manner equivalent to or better than the NIM electronics. Proof of concept was achieved in 2015 when a prototype upgrade system on ZEUS was built and tested and gating parameter settings were determined that successfully separated the NaI and CsI signals. Phase II required establishing a LabVIEW software interface with Pixie-4 electronics in lieu of the manufacturer provided Pixie-4 software called the Pixie Viewer. In addition, phase II included 1) final optimization of the gating parameters on the prototype Pixie-4 ZEUS system, 2) finalizing Requirements, Design and Test Plan documents, 3) LabVIEW software interface quality assurance (QA) testing, 4) setting up the HERCULES system with the Pixie-4 upgrade electronics, 5) check source and background calibration of both systems, 6) absolute efficiency determination on both systems and 7) procedure revisions and implementation of both systems into routine operations. In 2017 phase II was completed including the preparation of detailed Requirements, Design and Test Plan documents. The LabVIEW interface software that communicates and controls the Pixie-4 has been completed, merged with the preexisting LabVIEW operations software and fully tested. Gating parameter optimization, configuration of HERCULES with the Pixie-4 electronics, check source and background calibrations and absolute efficiency determinations have all been performed - quantitative results are presented in the full paper. For performance validation, comparison measurements of actual GIC bags on both the HERCULES system using the old NIM Bin electronics and the ZEUS system using the upgraded Pixie-4 electronics have been done and evaluated. Finally, procedure revisions and implementation of both systems into routine operations is currently in process and planned to be complete by the end of calendar year 2017. (authors)