Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CARBON 14”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Model study of atmospheric transport using carbon 14 and strontium 90 as inert tracers

The observed excess carbon 14 in the atmosphere from 1963 to 1970 provides unique, but limited, data up to an altitude of about 35 km for testing the air motions calculated by 11 multidimensional atmospheric models. Strontium 90 measurements in the atmosphere from 1964 to mid-1967 provide data that have more latitude coverage than those of carbon 14 and are useful for testing combined models of air motions and aerosol settling. Model calculations for carbon 14 begin at October 1963, 9 months after the conclusion of the nuclear bomb tests; the initial conditions for the calculations are derived by three methods, each of which agrees fairly well with measured carbon 14 in October 1963 and each of which has widely different values in regions of the stratosphere where there were no carbon 14 measurements. The model results are compared to the stratospheric measurements, not as if the observed data were absolute standards, but in an effort to obtain new insight about the models and about the atmosphere. The measured carbon 14 vertical profiles at 31 deg N are qualitatively different from all of the models; the measured vertical profiles show a maximum mixing ratio in the altitude range of 20 to 25 km from October 1963 through July 1966, but all modeled profiles show mixing ratio maxima that increase in altitude from 20 km in October 1963 to greater than 40 km by April 1966. Both carbon 14 and strontium 90 data indicate that the models differ substantially among themselves with respect to stratosphere-troposphere exchange rate, but the modeled carbon 14 stratospheric residence times indicate that differences among the models are small with respect to transport rate between the middle stratosphere and the lower stratosphere. Strontium 90 data indicate that aerosol settling is important up to at least 35 km altitude. Relative to the measurements, about three quarters of the models transport carbon 14 from the lower stratosphere to the troposphere too rapidly, and all models with all three sets of initial conditions appear to sweep carbon 14 out of the midstratosphere (above 28 km) much more slowly than was observed from 1963 to 1970. Atmospheric dynamicists should seriously consider that the carbon 14 measurements imply with respect to advection in the midstratosphere.

Kinnison, D. E.↗

Estimation of carbon 14 inventory in hull and end-piece wastes from Japanese commercial reprocessing operation

Hull and end-piece wastes generated from reprocessing plant operations are expected to be disposed of in a deep underground repository as Group 2 TRU wastes under the Japanese classification system. The activated metals that compose the spent fuel assemblies such as Zircaloy claddings and stainless steel nozzles are mixed and compressed after fuel dissolution, and then stuffed into stainless steel canisters. Carbon 14 is a typical activated product in the hulls and end-pieces and is mainly generated by the {sup 14}N(n,p){sup 14}C reaction. In the previous safety assessment of the TRU waste in Japan, the radionuclides inventory was calculated by ORIGEN-2 code. Some conservative assumptions and preliminary estimates were used in this calculation. For example, total radionuclides generated from a single type of fuel assembly (45 GWd/tU for a PWR unit), and the thickness of the Zircaloy oxide film on the hulls (80 μm) were both overestimated. The second assumption in particular has a large effect on exposure dose evaluation. Therefore, it is essential to have a realistic source term evaluation regarding such items as the C-14 inventory and its distribution to waste parts. In the present study, a C-14 inventory of the hull and end-piece wastes from the operation of a commercial reprocessing plant in Japan corresponding to 32,000 tU (16,000 tU in each BWR and PWR) was calculated. Analysis using individual irradiation conditions and fuel characteristics was conducted on 6 types of fuel assemblies for BWRs and 12 types for PWRs (4 pile types x 3 burnup limits). The oxide film thickness data for each fuel type cladding were obtained from the published literature. Activation calculations were performed by using ORIGEN-2 code. For the amount of spent assembly and other waste characteristics, representative values were assumed based on the published literature. As a preliminary experiment, C-14 in irradiated BWR claddings was measured and found to be consistent with the calculated activation. The total C-14 inventory was estimated as 4.46x10{sup 14} Bq, consisting of 2.58x10{sup 14} Bq for BWRs and 1.87x10{sup 14} Bq for PWRs, and is consistent with the safety assessment of 4.4x10{sup 14} Bq. However, the distribution of the C-14 inventory to hull oxide, which was estimated under the assumption of instantaneous radionuclide release in the safety assessment, decreased from 5.72x10{sup 13} Bq (13% of the total) in the previous assessment to 1.30x10{sup 13} Bq (2.9% of the total; consisting of 1.48x10{sup 12} for BWRs and 1.15x10{sup 13} for PWRs). In other words, the exposure dose peak is reduced to approximate 25% of its previous value due to the use of detailed oxide film data that the BWR cladding has a thin oxide film. Other instantaneous release components for C-14 such as the fuel residual were negligible. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Disposal of De-ionizer Vessels Highly Contaminated with {sup 14}Carbon at SRS

At the Savannah River Site (SRS), nuclear production reactors used de-ionizers to control the chemistry of the reactor moderator during their operation to produce nuclear materials primarily for the weapons program. These de-ionizers were removed from the reactors and stored as a legacy waste with no path to disposal due to the relatively high {sup 14}C contamination (i.e., on the order of 20 curies per de-ionizer for 48-50 de-ionizers) and the low disposal limit of 4.2 Ci previously established for the Intermediate Level Vault (ILV). The ILV is considered most appropriate facility within which to dispose these items due to the method of solidifying waste items with cementitious material inside concrete vaults. In previous analyses the {sup 14}C ILV disposal limit was established at 4.2 Ci resulting from the use of a very conservative method to analyze the dose received from atmospheric releases of gaseous {sup 14}C. This investigation implemented a more rigorous evaluation of the physical and chemical processes influencing the release and migration of gaseous {sup 14}C (as CO{sub 2}) to obtain a more realistic estimate of atmospheric dose and to determine new ILV disposal limits. The results are in terms of an emanation rate of {sup 14}C activity at the land surface. There is a rapid buildup to the maximum emanation rate of 1.42 E-8 Ci/year within 0.4 years. This rate continues steadily for the remainder of the simulation. The maximum emanation rate was used to calculate the dose to the Maximally Exposed Individual (MEI) at a point 100 m from the ILV, which is the most restrictive exposure point. The dose to the MEI at this location was calculated to be 3.83 E-05 mrem/yr. which is minuscule compared to the exposure limit defined in US DOE Order 435.1 as 10 mrem/yr. Considering the tiny dose to the MEI calculated in this analysis, no atmospheric pathway limit needed to be applied to the Intermediate Level Vault for {sup 14}C. This is justified in that no matter how much {sup 14}C is disposed in the ILV disposal environment, only a set, relatively small quantity can move into the air space as gas due to the solubility control limitation. Consequently, the groundwater pathway disposal limit for resin-based {sup 14}C in the Intermediate Level Vault became the most restrictive limit among the various pathways, this limit being 2.6 E+06 Ci, which easily allows for disposal of all the Reactor Moderator De-ionizers.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

COMET ENCOUNTERS AND CARBON 14

The {sup 14}C production of shock-accelerated particles is calculated in terms of the total energy released in energetic particles. The recently reported 1.2% jump in the {sup 14}C content of the atmosphere in the year C.E. 775, it is found, would require {approx}> 10{sup 34} erg in energetic particles, less than first estimates but far more than any known solar flare on record. It is noted that the superflare from a large comet (comparable to C/Hale-Bopp) colliding with the sun could produce shock-accelerated GeV cosmic rays in the solar corona and/or solar wind, and possibly account for the C.E. 775 event. Several additional predictions of cometary encounters with the sun and other stars may be observable in the future.

79 ASTRONOMY AND ASTROPHYSICS↗

Search for carbon 14 in tektites.

An attempt was made to detect cosmic-ray produced C-14 in australites and far-east tektites. No C-14 activity was found outside of statistical fluctuations. If a terrestrial age of 10 thousand years is assumed for australites, a maximum cosmic-ray exposure time of one thousand years is obtained for these tektites on the basis of a 2-sigma statistical error.

Boeckl, R. S.↗

Sensitivity study of advection and diffusion coefficients in a two-dimensional stratospheric model using excess carbon 14 data

The time evolution of excess C-14 in the stratosphere and the troposphere from October 1963 to December 1966 is investigated using the Caltech/JPL two-dimensioanal transport model, with transport coefficients taken from Yang and Tung (1989). It is found that the model successfully accounts for observations reported previously. It is calculated that excess C-14 is removed from the atmosphere with surface deposition velocities of 0.003 cm/sec in the Southern Hemisphere and 0.005 cm/sec in the Northern Hemisphere. This result is contrary to the current understanding that the oceans are the dominant sink for excess C-14.

Shia, Run-Lie↗

Saturation of SERCA's lipid annulus may protect against its thermal inactivation

The sarco(endo)plasmic reticulum Ca{sup 2+}-ATPase (SERCA) pumps are integral membrane proteins that catalyze the active transport of Ca{sup 2+} into the sarcoplasmic reticulum, thereby eliciting muscle relaxation. SERCA pumps are highly susceptible to oxidative damage, and cytoprotection of SERCA dampens thermal inactivation and is a viable therapeutic strategy in combating diseases where SERCA activity is impaired, such as muscular dystrophy. Here, we sought to determine whether increasing the percent of saturated fatty acids (SFA) within SERCA's lipid annulus through diet could protect SERCA pumps from thermal inactivation. Female Wistar rats were fed either a semi-purified control diet (AIN93G, 7% soybean oil by weight) or a modified AIN93G diet containing high SFA (20% lard by weight) for 17 weeks. Soleus muscles were extracted and SERCA lipid annulus and activity under thermal stress were analyzed. Our results show that SERCA's lipid annulus is abundant with short-chain (12–14 carbon) fatty acids, which corresponds well with SERCA's predicted bilayer thickness of 21 Å. Under control-fed conditions, SERCA's lipid annulus was already highly saturated (79%), and high-fat feeding did not increase this any further. High-fat feeding did not mitigate the reductions in SERCA activity seen with thermal stress; however, correlational analyses revealed significant and strong associations between % SFA and thermal stability of SERCA activity with greater %SFA being associated with lower thermal inactivation and greater % polyunsaturation and unsaturation index being associated with increased thermal inactivation. Altogether, these findings show that SERCA's lipid annulus may influence its susceptibility to oxidative damage, which could have implications in muscular dystrophy and age-related muscle wasting. - Highlights: • SERCA's lipid annulus in rat soleus was measured after immunoconcentration. • Short fatty acid chains surround SERCA and may ensure optimal hydrophobic matching. • SERCA's annulus is highly saturated in control-fed and high-fat fed rats. • Greater saturation associates with small levels of thermal inactivation. • Greater unsaturation associates with large levels of thermal inactivation.

60 APPLIED LIFE SCIENCES↗

Stratospheric eddy diffusion coefficients from tracer data

Global distributions of nitrous oxide, methane, ozone, and carbon 14 are used to estimate four sets of stratospheric eddy diffusion coefficients. A photochemical equilibrium model calculates O(3P), O(1D), H, HO2, OH, H2O2, NO, and NO2 densities, as a function of altitude, latitude, and time. The calculated O(1D), OH, and observed Cl densities are used to obtain the eddy profiles associated with the methane and nitrous oxide distributions, for altitudes between 10 and 40 km. Application of a constant flux condition to the seasonally averaged ozone data yields eddy values below 20 km. Time-dependent carbon 14 calculations produce eddy coefficients between 13 and 27 km. A composite profile is obtained by comparing the four sets of coefficients. Further, carbon 14 computations are used to test these profiles as well as those recommended in reports issued by the National Academy of Sciences in 1976 and 1979. The composite eddy profile produces the best agreement.

Massie, S. T.↗

Investigation of carbon distribution with {sup 14}C as tracer for carbon dioxide (CO{sub 2}) sequestration through NH{sub 4}HCO{sub 3} production

This work studies carbon fate using the {sup 14}C tracer technique in ecosystems when synthesized fertilizer is applied. The concept of aqueous ammonia solution scrubbing CO{sub 2} from flue gas is used in the fertilizer synthesis. Products after the capture are ammonium bicarbonate (ABC, NH{sub 4}HCO{sub 3}) or long-term effect ammonium bicarbonate (LEABC, NH{sub 4}HCO{sub 3}), an economic source of nitrogen fertilizer. The ABC or LEABC is used as a 'carrier' to transport CO{sub 2} from the atmosphere to the crops and soil. An indoor greenhouse was built, and wheat was chosen as the plant to study in this ecosystem. The investigated ecosystem consists of plant (wheat), soils with three different pH values (alkaline, neutral, and acidic), and three types of underground water (different Ca{sup 2+} and Mg{sup 2+} concentrations). After biological assimilation and metabolism in wheat receiving ABC or LEABC, it was found that a considerable amount (up to 10%) of the carbon source was absorbed by the wheat with increased biomass production. The majority of the unused carbon source (up to 76%) percolated into the soil as carbonates, such as environmentally benign calcium carbonate (CaCO{sub 3}). Generally speaking, alkaline soil has a higher capability to capture and store carbon. For the same soil, there is no apparent difference in carbon capturing capability between ABC and LEABC. These findings answer the question of how carbon is distributed after synthesized ABC or LEABC is applied into the ecosystem. In addition, a separate postexperiment on carbon forms that existed in the soil was made. It was found that up to 88% of the trapped carbon existed in the form of insoluble salts (i.e., CaCO{sub 3}) in alkaline soils. This indicates that alkaline soil has a greater potential for storing carbon after the use of the synthesized ABC or LEABC from exhausted CO{sub 2}. 21 refs., 6 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Stable trifluorostyrene containing compounds grafted to base polymers, and their use as polymer electrolyte membranes

A fluorinated ion exchange polymer prepared by grafting at least one grafting monomer on to at least one base polymer, wherein the grafting monomer comprises structure 1a or 1b: wherein Z comprises S, SO.sub.2, or POR wherein R comprises a linear or branched perfluoroalkyl group of 1 to 14 carbon atoms optionally containing oxygen or chlorine, an alkyl group of 1 to 8 carbon atoms, an aryl group of 6 to 12 carbon atoms or a substituted aryl group of 6 to 12 carbon atoms; RF comprises a linear or branched perfluoroalkene group of 1 to 20 carbon atoms, optionally containing oxygen or chlorine; Q is chosen from F, --OM, NH.sub.2, --N(M)SO.sub.2R.sup.2.sub.F, and C(M)(SO.sub.2R.sup.2.sub.F).sub.2, wherein M comprises H, an alkali cation, or ammonium; R.sup.2.sub.F groups comprises alkyl of 1 to 14 carbon atoms which may optionally include ether oxygens or aryl of 6 to 12 carbon atoms where the alkyl or aryl groups may be perfluorinated or partially fluorinated; and n is 1 or 2 for 1a, and n is 1, 2, or 3 for 1b. These ion exchange polymers are useful in preparing catalyst coated membranes and membrane electrode assemblies used in fuel cells.

Yang, Zhen-Yu↗

Active microbial biomass decreases, but microbial growth potential remains similar across soil depth profiles under deeply-vs. shallow-rooted plants

Climate-smart land management practices that replace shallow-rooted annual crop systems with deeply-rooted perennial plants can contribute to soil carbon sequestration. However, deep soil carbon accrual may be influenced by active microbial biomass and their capacity to assimilate fresh carbon at depth. Incorporating active microbial biomass, dormancy, and growth in microbially-explicit models can improve our ability to predict soil's capacity to store carbon. But, so far, the microbial parameters that are needed for such modeling are poorly constrained, especially in deep soil layers. Here, we used a lab incubation experiment and growth kinetics model to estimate how microbial parameters vary along 240 cm of soil depth in profiles under shallow- (soy) and deeply-rooted (switchgrass) plants 11 years after plant cover conversion. We also assessed resource origin and availability (total organic carbon, 14 C, extractable organic carbon, specific UV absorbance of K 2 SO 4 extractable organic C, total nitrogen, total dissolved nitrogen) along the soil profiles to examine associations between soil chemical and biological parameters. Even though root biomass was greater and rooting depth was deeper under switchgrass than soy, resource availability and microbial growth parameters were generally similar between vegetation types. Instead, depth significantly influenced soil chemical and biological parameters. For example, resource availability and total and relative active microbial biomass decreased with soil depth. Decreases in the relative active microbial biomass coincided with increased lag time (response time to external carbon inputs) along the soil profiles. Even at a depth of 210–240 cm, microbial communities were activated to grow by added resources within a day. Maximum specific growth rate decreased to a depth of 90 cm and then remained consistent in deeper layers. Our findings show that >10 years of vegetation and rooting depth changes may not be long enough to alter microbial growth parameters, and suggest that at least a portion of the microbial community in deep soils can grow rapidly in response to added resources. Our study determined microbial growth parameters that can be used in microbially-explicit models to simulate carbon dynamics in deep soil layers.

14C↗