Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CAPACITANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Adsorption and capacitive regeneration of nitrate using inverted capacitive deionization with surfactant functionalized carbon electrodes [Nitrate removal using inverted capacitive deionization with surfactant-treated electrodes]

Nitrate is a pollutant present in groundwater worldwide. Several techniques are available to remove nitrate from water, but they are difficult to automate in remote settings or require chemicals for treatment for regeneration. Here, we demonstrate the use of two surfactant-treated high surface area porous electrodes for passive adsorption of nitrate followed by electrical regeneration. In order to generate the surface charge driving adsorption, we functionalized the active electrode (cathode) and capacitive counter electrode (anode) with cetrimonium bromide (CTAB) and sodium dodecyl benzene sulphonate (SDBS), respectively. We find voltage applied during regeneration is directly proportional to the subsequent available adsorption capacity at short circuit. In a recent preliminary work, we used a Faradaic counter electrode, and here, we compare both studies in terms of energy-normalized adsorbed salt (ENAS)—a measure of energy efficiency—and average salt adsorption rate (ASAR). Lastly, we show that capacitive counter electrode used in this work increases ENAS by two orders of magnitude, while maintaining a similar ASAR.

42 ENGINEERING↗
DOE OSTI2020

Interplay of negative electronic compressibility and capacitance enhancement in lightly-doped metal oxide Bi 0.95 La 0.05 FeO 3 by quantum capacitance model

Light-sensitive capacitance variation of Bi 0.95 La 0.05 FeO 3 (BLFO) ceramics has been studied under violet to UV irradiation. The reversible capacitance enhancement up to 21% under 405 nm violet laser irradiation has been observed, suggesting a possible degree of freedom to dynamically control this in high dielectric materials for light-sensitive capacitance applications. By using ultraviolet photoemission spectroscopy (UPS), we show here that exposure of BLFO surfaces to UV light induces a counterintuitive shift of the O 2p valence state to lower binding energy of up to 243 meV which is a direct signature of negative electronic compressibility (NEC). A decrease of BLFO electrical resistance agrees strongly with the UPS data suggesting the creation of a thin conductive layer on its insulating bulk under light irradiation. By exploiting the quantum capacitance model, we find that the negative quantum capacitance due to this NEC effect plays an important role in this capacitance enhancement.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Electric double layer capacitance for ionic liquids in nanoporous electrodes: Effects of pore size and ion composition

The energy density of an electric double layer (EDL) capacitor, a type of supercapacitor, depends on the ion distribution within the micropores of electrodes that are typically made of amorphous carbon. By using coarse-grained models and the classical density functional theory, we investigate the distributions of ionic species among different idealized nanopores in contact with an asymmetric ionic liquid mixture and the effects of the bulk electrolyte composition on capacitive energy storage. We find that a charged pore is always small-ion selective, provided all ions have the same valence and similar non-electrostatic interactions. While small ions enhance both the EDL capacitance and the accessibility of micropores, an ionic mixture containing ions of different sizes may yield a capacitance higher than those corresponding to pure ionic liquids. Furthermore, the increased capacitance may be attributed to more efficient ion packing near the charged surface. At certain conditions, the improvement is on a par with the anomalous capacitance rise for pure ionic liquids in electrodes with ultranarrow pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electronic Scanning Strategies in Adaptive Electrical Capacitance Volume Tomography: Tradeoffs and Prospects

Electrical Capacitance Volume Tomography (ECVT) has been applied for imaging of multiphase flows found in industrial applications. The ill-posed nature of the image reconstruction problem in ECVT and the consequent low resolution can be alleviated by employing electronic scanning enabled by electrode segmentation and reconfiguration during data acquisition. Here we study electronic scanning strategies that mimic physical rotation and shifting of the sensor along its symmetry axis. First, we study the feasibility of electronic scanning by analyzing the capacitance transducer circuit in SPICE. Then, we simulate electronic scanning using the finite element method for different electrode shapes, for which we compare the image reconstruction results and acquisition time. We find a noticeable improvement in image resolution for the scanning cases over conventional ECVT. Lastly, among the scanning cases, we emphasize a particular electrode shape that provides the best image resolution along with the minimal amount of acquisition time.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Velocity Profiling of a Gas–Solid Fluidized Bed Using Electrical Capacitance Volume Tomography

In this study, a method of producing velocity profile maps from electrical capacitance volume tomography (ECVT) measurements by reconstructing displacement from measured changes in capacitance is developed and applied to fluidized bed systems. The mapping of the reconstruction leverages the gradient of the sensitivity distribution of the ECVT sensor to circumvent the need for image cross correlation techniques. Experimental data of both bubbling and slugging fluidized beds are collected in a cold flow model. Adaptation of the technique is discussed in detail, and velocity profiles are obtained for a range of gas flow rates. The produced velocity maps are compared against the established methods of cross correlation and against empirical correlations from the literature and are found to agree well in tracking slug and bubble velocity. The exception is when the tracked object is large relative to the ECVT sensor dimensions, a scenario that can be avoided through proper sensor design. The quantities of average velocity, momentum, and solid and gas volume fraction are derived from the image and velocity profiles. The results demonstrate and extend the power of ECVT as a measurement tool for the study and monitoring of gas–solid fluidized beds by providing a computationally cheaper alternative to 3-D cross correlation for deriving velocity profiles.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

Potential limits of capacitive deionization and membrane capacitive deionization for water electrolysis

Water electrolysis can delay the operation of capacitive deionization (CDI) and membrane CDI (MCDI). Here, we investigate the overpotential limits of CDI and MCDI (OP-MCDI) for water electrolysis and desalination performance. For sodium chloride concentrations of ~28,460 ppm, MCDI with mesoporous carbon electrodes could be operated at up to 2.4 V without water electrolysis, and the salt-adsorption capacity of the OP-MCDI system at 2.4 V was about two times greater than that of the MCDI at 1.2 V. This study offers an opportunity to extend the applicability of conventional CDI and MCDI systems for desalination of low-salinity solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Freestanding NiFe Oxyfluoride Holey Film with Ultrahigh Volumetric Capacitance for Flexible Asymmetric Supercapacitors

In this work, a freestanding NiFe oxyfluoride (NiFeOF) holey film was prepared by electrochemical deposition and anodic treatments. With the combination of good electrical conductivity and holey structure, the NiFeOF holey film offers superior electrochemical performance, due to the following reasons: (i) The residual metal alloy framework can be used as the current collector to improve electrode conductivity. Moreover, the as-prepared freestanding NiFeOF holey film can be used as a supercapacitor electrode without reliance on binders and other additives. The residual metal alloy framework and binder-free electrode effectively reduces electrode resistance, thus improving electron transport. (ii) The highly interconnected holey structure and hierarchical pore distribution provides a high specific surface area to improve electron transport, enhancing rapid ion transport and mitigating diffusion limitations throughout the holey film. (iii) The excellent mechanical characteristics facilitate flexibility and cyclability related performance. Additionally, the NiFeOF holey film presents exceptional electrochemical performance, showing that it is a promising alternative for small/micro-size electronic devices.

holey film↗
DOE OSTI2019

Sequential Capacitive Deposition of Ionic Liquids for Conformal Thin Film Coatings on Oxygen Reduction Reaction Electrocatalysts

Ionic liquid (IL)-modified carbon-supported catalysts have demonstrated significant improvements in oxygen reduction reaction (ORR) activity. However, transition of this result from the half-cell to the proton exchange membrane fuel cell (PEMFC) has been challenging. Presented here is a processing methodology that yields the formation of a thin (<2 nm) conformal IL coating on the surface of both three-dimensional electrocatalysts and bulk single crystals through the sequential capacitive deposition (SCD) of anionic and cationic components and their subsequent condensation into a hydrophobic, protic IL. In conclusion, SCD shows promise for IL incorporation into preformed PEMFC catalyst layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electric field reversals resulting from voltage waveform tailoring in Ar/O 2 capacitively coupled plasmas sustained in asymmetric systems

The etching of nanometer scale high-aspect-ratio (HAR) features into dielectric materials in low pressure radio frequency excited plasmas is often accompanied by charge accumulation inside the features which can slow etching rates and produce distortions such as twisting. The intra feature charging is at least partially produced by differences in electron and ion energy and angular distributions (EADs). Positive ions, accelerated to high energies having narrow angular spreads by the sheath electric field, can penetrate deeply into HAR features. Electrons typically arrive at the wafer with nearly thermal and isotropic distributions and do not penetrate deeply into HAR features. These disparities lead to differential charging of the inside of the feature, which can lead to reductions in etch rate and feature distortion due to ion deflection. With in-creasing aspect ratio of features, charging challenges are expected to continue for the foreseeable future. In this work, the use of tailored voltage waveforms in geometrically asymmetric capacitively coupled plasmas sustained in Ar/O 2 at 40 mTorr was computationally investigated with the goal of shaping the EAD of electrons incident onto the substrate to address differential charging. The tailored waveform consisted of a sinusoidal wave and its higher harmonics with a fundamental frequency of 1 MHz. Further, we found that electric field reversals in the sheath and presheath can occur during the anodic portion of the cycle. The electric field reversal increases the energy and decreases the angular spread of electrons incident onto the substrate. The magnitude of the electric field reversal can be controlled by the phase angle of the even harmonics and the gas composition. Due to its electronegative nature, increasing mole fractions of O 2 impedes electron transport to the surface which further increases the electric field reversal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗