Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Leaching characteristics of calcium-based compounds in MSWI Residues: From the viewpoint of clogging risk

Highlights: • The leaching behavior of Ca-based compounds commonly in MSWI residues was studied. • pH is the crucial factor for calcium leaching process. • CaCO{sub 3} was the most sensitive to leaching temperature and Ca{sub 3}(PO{sub 4}){sub 2} was the least. • Ca leaching of MSWIBA and SAPCR attributed to CaCO{sub 3} and Ca{sub 3}(PO{sub 4}){sub 2} respectively. • Potential clogging ability of MSWI residues leachate in open air was calculated. - Abstract: Leachate collection system (LCS) clogging caused by calcium precipitation would be disadvantageous to landfill stability and operation. Meanwhile, calcium-based compounds are the main constituents in both municipal solid waste incineration bottom ash (MSWIBA) and stabilized air pollution control residues (SAPCR), which would increase the risk of LCS clogging once these calcium-rich residues were disposed in landfills. The leaching behaviors of calcium from the four compounds and municipal solid waste incineration (MSWI) residues were studied, and the influencing factors on leaching were discussed. The results showed that pH was the crucial factor in the calcium leaching process. CaCO{sub 3} and CaSiO{sub 3} began leaching when the leachate pH decreased to less than 7 and 10, respectively, while Ca{sub 3}(PO{sub 4}){sub 2} leached at pH < 12. CaSO{sub 4} could hardly dissolve in the experimental conditions. Moreover, the sequence of the leaching rate for the different calcium-based compounds is as follows: CaSiO{sub 3} > Ca{sub 3}(PO{sub 4}){sub 2} > CaCO{sub 3}. The calcium leaching from the MSWIBA and SAPCR separately started from pH < 7 and pH < 12, resulting from CaCO{sub 3} and Ca{sub 3}(PO{sub 4}){sub 2} leaching respectively, which was proven by the X-ray diffraction results. Based on the leaching characteristics of the different calcium compounds and the mineral phase of calcium in the incineration residues, simulated computation of their clogging potential was conducted, providing the theoretical basis for the risk assessment pertaining to LCS clogging in landfills.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Calcium-metal alloy anode materials for reversible calcium-ion batteries

Calcium ion batteries are provided. The calcium ion batteries include a cathode, an alloying anode composed of one or more intermetallic calcium compounds in electrical communication with the cathode; and an electrolyte disposed between the anode and the cathode. The intermetallic calcium compounds are intermetallic compounds of calcium and transition metals and metalloids.

Yao, Zhenpeng↗

Alkaline earth-based coordination polymers derived from a cyclotriphosphazene-functionalized hexacarboxylate

Combination of hexakis(4-carboxylatephenoxy)cyclotriphosphazene with alkaline earth ions of increasing ionic radii (Mg{sup 2+}, Ca{sup 2+} and Ba{sup 2+}) under different solvothermal conditions yielded three new coordination polymers, and their crystal structures were determined by single-crystal X-ray diffraction analysis. The magnesium compound displays a three dimensional (3D) network structure constructed from the deprotonated ligand and the secondary building block Mg(COO){sub 4}, which can be rationalized as a (4,6)-connected topological net with the Schläfli symbol of (4{sup 4}·6{sup 2}){sub 3}(4{sup 9}·6{sup 6}){sub 2}. The calcium compound consists of 1D infinite “Ca-O” inorganic chains connected by the deprotonated ligands to from a 3D framework. The barium compound exhibits a 3D framework in which 1D “Ba-O” inorganic chains are connected together by the deprotonated organic linkers. Due to the semi-rigid nature, the ligand adopts distinctly different conformations in the three compounds. The metal ions’ influence exerted on the final structure of the resulting coordination polymers is also discussed. When the radii of alkaline earth ions increases descending down the group from Mg(II) to Ba(II), the coordination number becomes larger and more versatile: from 6 in the magnesium compound, to 6,7 and 10 in the calcium compound, and to 8 and 9 in the barium compound, thus substantially influencing the resulting final framework structures. Also, the photophysical properties were investigated systematically, revealing that the three compounds are photoluminscent in the solid state at room temperature. This work demonstrates that although the multiplicity of conformation in the hexacarboxylate ligand based on the inorganic scaffold cyclotriphosphazene makes it difficult to predict how this ligand will form extended network, but provides unique opportunities for the formation of diverse inorganic-organic hybrids exhibiting rich structural topologies. - Graphical abstract: Three alkaline earth-based coordination polymers were constructed from a semirigid cyclotriphosphazene-functionalized hexacarboxylate exhibiting different inorganic nodes as well as distinct ligand conformations relying on the metal ions, which presents the first example of such a ligand incorporated into alkaline earth–based coordination polymers. - Highlights: • Three alkaline earth-based coordination polymers were synthesized. • The three compounds exhibit different inorganic nodes and ligand conformations. • The three compounds are photoluminscent in the solid state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DUSEL Facility Cooling Water Scaling Issues

Precipitation (crystal growth) in supersaturated solutions is governed by both kenetic and thermodynamic processes. This is an important and evolving field of research, especially for the petroleum industry. There are several types of precipitates including sulfate compounds (ie. barium sulfate) and calcium compounds (ie. calcium carbonate). The chemical makeup of the mine water has relatively large concentrations of sulfate as compared to calcium, so we may expect that sulfate type reactions. The kinetics of calcium sulfate dihydrate (CaSO4 {center_dot} 2H20, gypsum) scale formation on heat exchanger surfaces from aqueous solutions has been studied by a highly reproducible technique. It has been found that gypsum scale formation takes place directly on the surface of the heat exchanger without any bulk or spontaneous precipitation in the reaction cell. The kinetic data also indicate that the rate of scale formation is a function of surface area and the metallurgy of the heat exchanger. As we don't have detailed information about the heat exchanger, we can only infer that this will be an issue for us. Supersaturations of various compounds are affected differently by temperature, pressure and pH. Pressure has only a slight affect on the solubility, whereas temperature is a much more sensitive parameter (Figure 1). The affect of temperature is reversed for calcium carbonate and barium sulfate solubilities. As temperature increases, barium sulfate solubility concentrations increase and scaling decreases. For calcium carbonate, the scaling tendencies increase with increasing temperature. This is all relative, as the temperatures and pressures of the referenced experiments range from 122 to 356 F. Their pressures range from 200 to 4000 psi. Because the cooling water system isn't likely to see pressures above 200 psi, it's unclear if this pressure/scaling relationship will be significant or even apparent. The most common scale minerals found in the oilfield include calcium carbonates (CaCO3, mainly calcite) and alkaline-earth metal sulfates (barite BaSO4, celestite SrSO4, anhydrite CaSO4, hemihydrate CaSO4 1/2H2O, and gypsum CaSO4 2H2O or calcium sulfate). The cause of scaling can be difficult to identify in real oil and gas wells. However, pressure and temperature changes during the flow of fluids are primary reasons for the formation of carbonate scales, because the escape of CO2 and/or H2S gases out of the brine solution, as pressure is lowered, tends to elevate the pH of the brine and result in super-saturation with respect to carbonates. Concerning sulfate scales, the common cause is commingling of different sources of brines either due to breakthrough of injected incompatible waters or mixing of two different brines from different zones of the reservoir formation. A decrease in temperature tends to cause barite to precipitate, opposite of calcite. In addition, pressure drops tend to cause all scale minerals to precipitate due to the pressure dependence of the solubility product. And we can expect that there will be a pressure drop across the heat exchanger. Weather or not this will be offset by the rise in pressure remains to be seen. It's typically left to field testing to prove out. Progress has been made toward the control and treatment of the scale deposits, although most of the reaction mechanisms are still not well understood. Often the most efficient and economic treatment for scale formation is to apply threshold chemical inhibitors. Threshold scale inhibitors are like catalysts and have inhibition efficiency at very low concentrations (commonly less than a few mg/L), far below the stoichiometric concentrations of the crystal lattice ions in solution. There are many chemical classes of inhibitors and even more brands on the market. Based on the water chemistry it is anticipated that there is a high likelihood for sulfate compound precipitation and scaling. This may be dependent on the temperature and pressure, which vary throughout the system. Therefore, various types and amounts of scaling may occur at different locations. Although it has been shown that decreased pressure causes increased scaling, it is unclear if this condition will have significant affect, as all the pressures are low. Sulfate concentrations predominate, but there is still a chance for calcium carbonate buildup, especially in the heat exchanger where the temperatures are rising. Additional information is needed to conduct a thorough analysis, but it would appear that a fairly simple injection system would be sufficient to address scaling issues.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The synthesis and structure of new transition metal lithium calcium nitride compounds

Three new nitrides, Li{sub 3}Ca{sub 2}V{sub 0.79}Nb{sub 0.21}N{sub 4}, Li{sub 2}Ca{sub 2.67}Nb{sub 0.33}N{sub 3} and Li{sub 12}Ca{sub 9}W{sub 5}N{sub 20}, were synthesized in sealed niobium tubes using lithium nitride as a flux at temperatures ranging from 800 Degree-Sign C to 1050 Degree-Sign C. In all of these compounds, the transition metals are coordinated tetrahedrally by nitrogen; these tetrahedra are isolated from each other. Bullet Li{sub 3}Ca{sub 2}V{sub 0.79}Nb{sub 0.21}N{sub 4}, space group P2{sub 1}/m (no. 11), cell parameters a=5.7669(8) A, b=6.9123(9) A, c=6.0116(12) A, {beta}=90.727(9) Degree-Sign , Z=2, has a shared vanadium/niobium tetrahedral position which shares vertices with the tetrahedrally-coordinated lithium position. Bullet Li{sub 2}Ca{sub 2.67}Nb{sub 0.33}N{sub 3}, space group Req /o(3, Macron )m (no. 166), cell parameters a=3.6311(2) A, c=29.459(3) A, Z=3, contains a disordered tetrahedral calcium/niobium position, an octahedral calcium position and a triangularly coordinated lithium position. Bullet Li{sub 12}Ca{sub 9}W{sub 5}N{sub 20}, space group C2/c (no. 15), cell parameters a=27.7347(19) A, b=8.6652(6) A, c=10.7685(7) A, {beta}=110.314(2) Degree-Sign , Z=4, contains three crystallographically different tungsten positions as well as one disordered lithium position. - Graphical abstract: Crystal structure of Li{sub 3}Ca{sub 2}V{sub 0.79}Nb{sub 0.21}N{sub 4} depicting the chains of edge-sharing LiN{sub 4} (light hatching) and (V/Nb)N{sub 4} (dark hatching) tetrahedra viewed approximately along the [100] direction. Calcium atoms are shown as open circles and nitrogen atoms are colored black. Highlights: Black-Right-Pointing-Pointer Three new lithium calcium nitrides are synthesized. Black-Right-Pointing-Pointer Lithium nitride flux used in synthesis. Black-Right-Pointing-Pointer Structures contain isolated tetrahedrally coordinated transition metals. Black-Right-Pointing-Pointer Li{sub 12}Ca{sub 9}W{sub 5}N{sub 20} contains three crystallographically different W positions.

36 MATERIALS SCIENCE↗

Reduced thermal conductivity in niobium-doped calcium-manganate compounds for thermoelectric applications

Reduction of thermal conductivity is essential for obtaining high energy conversion efficiency in thermoelectric materials. We report on significant reduction of thermal conductivity in niobium-doped CaO(CaMnO{sub 3}){sub m} compounds for thermoelectric energy harvesting due to introduction of extra CaO-planes in the CaMnO{sub 3}-base material. We measure the thermal conductivities of the different compounds applying the laser flash analysis at temperatures between 300 and 1000 K, and observe a remarkable reduction in thermal conductivity with increasing CaO-planar density, from a value of 3.7 W·m{sup −1}K{sup −1} for m = ∞ down to 1.5 W·m{sup −1}K{sup −1} for m = 1 at 400 K. This apparent correlation between thermal conductivity and CaO-planar density is elucidated in terms of boundary phonon scattering, providing us with a practical way to manipulate lattice thermal conductivity via microstructural modifications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Beneficial Use of Carbon Dioxide in Precast Concrete Production

The feasibility of using carbon dioxide as feedstock in precast concrete production is studied. Carbon dioxide reacts with calcium compounds in concrete, producing solid calcium carbonates in binding matrix. Two typical precast products are examined for their capacity to store carbon dioxide during the production. They are concrete blocks and fiber-cement panels. The two products are currently mass produced and cured by steam. Carbon dioxide can be used to replace steam in curing process to accelerate early strength, improve the long-term durability and reduce energy and emission. For a reaction within a 24-hour process window, the theoretical maximum possible carbon uptake in concrete is found to be 29% based on cement mass in the product. To reach the maximum uptake, a special process is developed to promote the reaction efficiency to 60-80% in 4-hour carbon dioxide curing and improve the resistance to freeze-thaw cycling and sulfate ion attack. The process is also optimized to meet the project target of $10/tCO 2 in carbon utilization. By the use of self-concentrating absorption technology, high purity CO 2 can be produced at a price below $40/t. With low cost CO 2 capture and utilization technologies, it is feasible to establish a network for carbon capture and utilization at the vicinity of carbon sources. If all block produces and panel producers in United States could adopt carbon dioxide process in their production in place of steam, carbon utilization in these two markets alone could consume more than 2 Mt CO 2 /year. This capture and utilization process can be extended to more precast products and will continue for years to come.

36 MATERIALS SCIENCE↗

Predicted energies and structures of {beta}-Ca{sub 3}(PO{sub 4}){sub 2}

One of the 6a cation sites of the {beta}-Ca{sub 3}(PO{sub 4}){sub 2} structure has previously been described as half occupied. Here, classical static lattice techniques are used to model the different configurations that the Ca ions can exhibit over these Ca(4) 6a sites. All possible configurations in the single primitive unit cell and a hexagonal supercell 3{sub h}x1x1 have been generated, along with configurationally averaged structures, that exhibit the experimentally reported R 3c symmetry. The lowest energy configuration of the primitive cell exhibits R 3 symmetry. Conversely, the lowest energy configurations derived from the hexagonal supercell, which are considerably more stable, exhibit P 3{sub 1} and P 3{sub 2} symmetries, which are isomorphic supergroups of R 3c. The implication of these simulations are discussed in terms of refined structural models of the material. - Graphical Abstract: One of the 6a cation sites of the {beta}-Ca{sub 3}(PO{sub 4}){sub 2} structure has previously been described as half occupied. Here, classical static lattice techniques are used to model the different configurations that the Ca ions can exhibit over these Ca(4) 6a sites. All possible configurations in the single primitive unit cell and a hexagonal supercell (3{sub h}x1x1) have been generated, along with configurationally averaged structures, that exhibits experimentally reported R 3c symmetry. The lowest energy configuration of the primitive cell exhibits R 3 symmetry. Conversely, the lowest energy configurations derived from the hexagonal supercell cell, which are considerably more stable, exhibit P 3{sub 1} and P 3{sub 2} symmetries, which are isomorphic supergroups of R 3c. The implication of these simulations are discussed in terms of refined structural models of the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical absorption in CaF{sub 2} nanoceramics

The optical characteristics of two Russian-made CaF{sub 2} ceramic samples are compared to those of single-crystal CaF{sub 2}. The results indicate that the ceramic possesses high optical quality and a small absorption coefficient ({approx}10{sup -3} cm{sup -1} at a wavelength of 1.07 {mu}m) and is suitable as a material for optical components. Experimental evidence is presented for spatial modulation of the thermally induced depolarisation in the ceramic. (nanostructures)

36 MATERIALS SCIENCE↗

Capacitance scaling law for diatomic molecules and prediction of their electron detachment energies

The variation or 'scaling' of the quantum capacitances is explored for 45 diatomic molecules as a function of their dimensions. Scaling trends in the capacitances of these diatomic molecules dictate an 'atoms-in-molecules' view of their valence energetics. That is, experimentally derived quantum capacitances for both homonuclear and heteronuclear diatomic molecules scale linearly with the average of the mean radii for the outermost orbitals of their component atoms. This is in accord with Maxwell's law for classical capacitors formed from two conducting atom-sized spheres in tangential contact. However, the scaling behavior for the molecules has some nonclassical features. Notably, the quantum capacitances extrapolate to nonzero values at zero dimensions. Radius-capacitance points of the homonuclear diatomics lie primarily along five scaling lines, with each determined by points for molecules composed of atoms with the same atomic symmetry (i.e., atoms from the same column in the periodic table). Five scaling lines for heteronuclear diatomics each are determined by points for molecules of the same or similar molecular symmetries. The molecules' quantum capacitances are calculated from their ionization potentials (IPs) and electron affinities (EAs). Thus, equations or laws for the scaling lines impose mutual consistency conditions among these electron detachment energies for different diatomics of similar symmetries. By taking advantage of this, the linear quantum capacitance scaling laws and ab initio atomic mean radii are used to predict IPs for two diatomics with known EAs (Ga{sub 2} and SeO), but for which there is no standard value of the IP. Similarly, the laws are used to predict EAs that were unknown or uncertain for several diatomics (Li{sub 2}, LiF, CSe, PN, BF, BCl, SiO, GeO, NCl, CaO, SrO, and BaO) with known IPs.

36 MATERIALS SCIENCE↗

Giant dielectric constant response of the composites in ternary system CuO-TiO{sub 2}-CaO

The subsolidus phase relations of the ternary system CuO-TiO{sub 2}-CaO sintered at 950 deg. C in air have been determined by powder X-ray diffraction method. Only one ternary compound CaCu{sub 3}Ti{sub 4}O{sub 12} was found in this system. From room-temperature dielectric property mapping at 10 kHz, a giant dielectric constant (epsilon{sub r}>10{sup 4}) was observed for most of the ceramic composites in the CuO-rich region and in the region along the CaO-CuO binary line. The composites in the CaCu{sub 3}Ti{sub 4}O{sub 12}-rich region were found to give a comparable giant dielectric constant when sintered at 1050 deg. C. The particular microstructure of larger grains with predominant phase surrounded by smaller grains with the secondary phases was found in such composites with a high dielectric constant. The relations between structures and dielectric properties were investigated. An internal barrier layer capacitance effect is the most probable mechanism to explain this particular dielectric behavior. - Graphical Abstract: In the ternary system, CuO-TiO{sub 2}-CaO, a giant dielectric constant (epsilon{sub r}) above 10{sup 4} (red color) was observed in most of the composites sintered at only 950 deg. C in the CuO-rich region. Dashed lines show the phase boundaries.

36 MATERIALS SCIENCE↗

The Comparative Structural Study of Vitreous Matrices P{sub 2}O{sub 5}centre dotMeO [MeO ident to Li{sub 2}O (M{sub 1}) or CaO (M{sub 2})] Systems and {sub x}Fe{sub 2}O{sub 3}(100-x)[P{sub 2}O{sub 5}centre dotMeO] Glasses by Raman Spectroscopy

For getting information about the way in which the structural units presented in glass matrices P{sub 2}O{sub 5}centre dotLi{sub 2}O (M{sub 1}) and P{sub 2}O{sub 5}centre dotCaO (M{sub 2}) are modifying with the substitutions Li{sub 2}O with CaO, these glasses where investigated by Raman spectroscopies. The absorption bands obtained and their assignments for each those two matrices are summarized. The influence of Fe{sub 2}O{sub 3} content on the structure of M1 and M2 matrices was followed.

36 MATERIALS SCIENCE↗

Phosphate-intercalated Ca-Fe-layered double hydroxides: Crystal structure, bonding character, and release kinetics of phosphate

The nitrate-form of Ca-Fe-layered double hydroxide (Ca-Fe-LDH) was synthesized via co-precipitation method, and its phosphate-intercalates were prepared by ion-exchange reaction. According to X-ray diffraction analysis, the Ca-Fe-LDH-NO{sub 3}{sup -} compound and its H{sub 2}PO{sub 4}{sup -}-intercalate showed hexagonal layered structures, whereas the ion-exchange reaction with HPO{sub 4}{sup 2-} caused a frustration of the layer ordering of LDH. Fe K-edge X-ray absorption spectroscopy clearly demonstrated that the Ca-Fe-LDH lattice with trivalent iron ions was well-maintained after the ion-exchange with HPO{sub 4}{sup 2-} and H{sub 2}PO{sub 4}{sup -}. Under acidic conditions, phosphate ions were slowly released from the Ca-Fe-LDH lattice and the simultaneous release of hydroxide caused the neutralization of acidic media. Fitting analysis based on kinetic models indicated a heterogeneous diffusion process of phosphates and a distinct dependence of release rate on the charge of phosphates. This study strongly suggested that Ca-Fe-LDH is applicable as bifunctional vector for slow release of phosphate fertilizer and for the neutralization of acid soil. -- Graphical abstract: We synthesized phosphate-intercalated Ca-Fe-LDH materials that can act as bifunctional inorganic vectors for the slow release of phosphate fertilizer and also the neutralization of acid soil. Fitting analysis based on kinetic models indicated a heterogeneous diffusion process of phosphates and a distinct dependence of release rate on the charge of phosphates. Display Omitted Research Highlights: {yields} The phosphate forms of Ca-Fe-layered double hydroxide (Ca-Fe-LDH) were synthesized via co-precipitation method. The crystal structure, bonding character, and release kinetics of phosphate of the phosphate-intercalates were investigated. These Ca-Fe-LDH materials are applicable as bifunctional vector for slow release of phosphate fertilizer and for the neutralization of acid soil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sorption and desorption properties of a CaH{sub 2}/MgB{sub 2}/CaF{sub 2} reactive hydride composite as potential hydrogen storage material

The hydrogenation behavior of 3CaH{sub 2}+4MgB{sub 2}+CaF{sub 2} composite was studied by manometric measurements, powder X-ray diffraction, differential scanning calorimetry and attenuated total reflection infrared spectroscopy. The maximum observed quantity of hydrogen loaded in the composite was 7.0 wt%. X-ray diffraction showed the formation of Ca(BH{sub 4}){sub 2} and MgH{sub 2} after hydrogenation. The activation energy for the dehydrogenation reaction was evaluated by DSC measurements and turns out to be 162{+-}15 kJ mol{sup -1} H{sub 2}. This value decreases due to cycling to 116{+-}5 kJ mol{sup -1} H{sub 2} for the third dehydrogenation step. A decrease of ca. 25-50 deg. C in dehydrogenation temperature was observed with cycling. Due to its high capacity and reversibility, this composite is a promising candidate as a potential hydrogen storage material. - Graphical abstract: PCI of 3CaH{sub 2}+4MgB{sub 2}+CaF{sub 2} reactive hydride composite at 325 deg. C and 350 deg. C. Open marks: dehydrogenation, closed marks: hydrogenation. Highlights: > The hydrogenation and dehydrogenation behavior of CaF{sub 2} doped CaH{sub 2}/MgB{sub 2} RHC is presented. > The new composite presents a superior hydrogen uptake compared with the non-doped composite.. > A reduction in the E{sub a} and the dehydrogenation temperature was observed by CaF{sub 2} doping and cycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sympathetic crystallization of CaH{sup +} produced by a laser-induced reaction

We investigated sympathetic Coulomb crystallization of CaH{sup +} ions produced by a laser-induced reaction through an excited state according to {sup 40}Ca{sup +}(4p {sup 2}P{sub 1/2}) + H{sub 2} {yields} {sup 40}CaH{sup +} + H. {sup 40}CaH{sup +} ions stored in a linear Paul trap were characterized by their secular-motion excitation spectrum and by the modified fluorescence images of crystallized Ca{sup +} ions. The number of two-species crystallized ions, the secular motion temperature, and the structure were determined by molecular dynamics simulations. Both the observed two-species ion crystals and simulation images demonstrate that the CaH{sup +} ions were sympathetically crystallized with their secular-motion temperature being less than 10 mK. We determined reaction rates from fluorescence images of two-species Coulomb crystals by systematically changing the reaction time. In addition a lower limit for the reaction rate coefficient k=8x10{sup -10} cm{sup 3}/s was obtained.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electronic band structures and photovoltaic properties of MWO{sub 4} (M=Zn, Mg, Ca, Sr) compounds

Divalent metal tungstates, MWO{sub 4}, with wolframite (M=Zn and Mg) and scheelite (M=Ca and Sr) structures were prepared using a conventional solid state reaction method. Their electronic band structures were investigated by a combination of electronic band structure calculations and electrochemical measurements. From these investigations, it was found that the band structures (i.e. band positions and band gaps) of the divalent metal tungstates were significantly influenced by their crystal structural environments, such as the W-O bond length. Their photovoltaic properties were evaluated by applying to the working electrodes for dye-sensitized solar cells. The dye-sensitized solar cells employing the wolframite-structured metal tungstates (ZnWO{sub 4} and MgWO{sub 4}) exhibited better performance than those using the scheelite-structured metal tungstates (CaWO{sub 4} and SrWO{sub 4}), which was attributed to their enhanced electron transfer resulting from their appropriate band positions. - Graphical abstract: The electronic band structures of divalent metal tungstates are described from the combination of experimental results and theoretical calculations, and their electronic structure-dependent photovoltaic performances are also studied. Highlights: > MWO{sub 4} compounds with wolframite (M=Zn and Mg) and scheelite structure (M=Ca and Sr) were prepared. > Their electronic band structures were investigated by the calculations and the measurements. > Their photovoltaic properties were determined by the crystal and electronic structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spectroscopic investigation of 2.02 {mu}m emission in Ho{sup 3+}/Tm{sup 3+} codoped transparent glass ceramic containing CaF{sub 2} nanocrystals

Tm{sup 3+} and Ho{sup 3+} codoped transparent glass ceramic (GC) containing CaF{sub 2} nanocrystals were fabricated by melt-quenching and subsequent thermal treatment. X-ray diffraction and transmission electron microscopy analysis confirmed the precipitation of CaF{sub 2} nanocrystals among the glass matrix. Energy-dispersive x-ray spectroscopy results evidenced the incorporation of Tm{sup 3+} and Ho{sup 3+} into the CaF{sub 2} nanocrystals. Judd-Ofelt parameters were calculated based on the absorption spectra, the smaller {Omega}{sub 2} and larger {Omega}{sub 6} imply that Tm{sup 3+} and Ho{sup 3+} ions has entered into a symmetrical ionic crystal field. 2.02 {mu}m emission spectral of the GC samples were recorded at room temperature with an excitation of 808 nm laser diode. The enhancement of the emission at 2.02 {mu}m in the GC samples could be attributed to more efficient cross relaxation process of Tm{sup 3+}:{sup 3}H{sub 4+}Tm{sup 3+}:{sup 3}H{sub 6}{yields}{sup 2}Tm{sup 3+}:{sup 3}H{sub 4}, and energy transfer from Tm{sup 3+} to Ho{sup 3+} benefited from the incorporation of rare earth ions into CaF{sub 2} nanocrystals.

36 MATERIALS SCIENCE↗