SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Synchrotron soft X-ray nano-imaging and spectromicroscopy reveals iron and calcium biomineralization in Alzheimer's disease amyloid plaques.
Highlights: • The leaching behavior of Ca-based compounds commonly in MSWI residues was studied. • pH is the crucial factor for calcium leaching process. • CaCO{sub 3} was the most sensitive to leaching temperature and Ca{sub 3}(PO{sub 4}){sub 2} was the least. • Ca leaching of MSWIBA and SAPCR attributed to CaCO{sub 3} and Ca{sub 3}(PO{sub 4}){sub 2} respectively. • Potential clogging ability of MSWI residues leachate in open air was calculated. - Abstract: Leachate collection system (LCS) clogging caused by calcium precipitation would be disadvantageous to landfill stability and operation. Meanwhile, calcium-based compounds are the main constituents in both municipal solid waste incineration bottom ash (MSWIBA) and stabilized air pollution control residues (SAPCR), which would increase the risk of LCS clogging once these calcium-rich residues were disposed in landfills. The leaching behaviors of calcium from the four compounds and municipal solid waste incineration (MSWI) residues were studied, and the influencing factors on leaching were discussed. The results showed that pH was the crucial factor in the calcium leaching process. CaCO{sub 3} and CaSiO{sub 3} began leaching when the leachate pH decreased to less than 7 and 10, respectively, while Ca{sub 3}(PO{sub 4}){sub 2} leached at pH < 12. CaSO{sub 4} could hardly dissolve in the experimental conditions. Moreover, the sequence of the leaching rate for the different calcium-based compounds is as follows: CaSiO{sub 3} > Ca{sub 3}(PO{sub 4}){sub 2} > CaCO{sub 3}. The calcium leaching from the MSWIBA and SAPCR separately started from pH < 7 and pH < 12, resulting from CaCO{sub 3} and Ca{sub 3}(PO{sub 4}){sub 2} leaching respectively, which was proven by the X-ray diffraction results. Based on the leaching characteristics of the different calcium compounds and the mineral phase of calcium in the incineration residues, simulated computation of their clogging potential was conducted, providing the theoretical basis for the risk assessment pertaining to LCS clogging in landfills.
Calcium ion batteries are provided. The calcium ion batteries include a cathode, an alloying anode composed of one or more intermetallic calcium compounds in electrical communication with the cathode; and an electrolyte disposed between the anode and the cathode. The intermetallic calcium compounds are intermetallic compounds of calcium and transition metals and metalloids.
Combination of hexakis(4-carboxylatephenoxy)cyclotriphosphazene with alkaline earth ions of increasing ionic radii (Mg{sup 2+}, Ca{sup 2+} and Ba{sup 2+}) under different solvothermal conditions yielded three new coordination polymers, and their crystal structures were determined by single-crystal X-ray diffraction analysis. The magnesium compound displays a three dimensional (3D) network structure constructed from the deprotonated ligand and the secondary building block Mg(COO){sub 4}, which can be rationalized as a (4,6)-connected topological net with the Schläfli symbol of (4{sup 4}·6{sup 2}){sub 3}(4{sup 9}·6{sup 6}){sub 2}. The calcium compound consists of 1D infinite “Ca-O” inorganic chains connected by the deprotonated ligands to from a 3D framework. The barium compound exhibits a 3D framework in which 1D “Ba-O” inorganic chains are connected together by the deprotonated organic linkers. Due to the semi-rigid nature, the ligand adopts distinctly different conformations in the three compounds. The metal ions’ influence exerted on the final structure of the resulting coordination polymers is also discussed. When the radii of alkaline earth ions increases descending down the group from Mg(II) to Ba(II), the coordination number becomes larger and more versatile: from 6 in the magnesium compound, to 6,7 and 10 in the calcium compound, and to 8 and 9 in the barium compound, thus substantially influencing the resulting final framework structures. Also, the photophysical properties were investigated systematically, revealing that the three compounds are photoluminscent in the solid state at room temperature. This work demonstrates that although the multiplicity of conformation in the hexacarboxylate ligand based on the inorganic scaffold cyclotriphosphazene makes it difficult to predict how this ligand will form extended network, but provides unique opportunities for the formation of diverse inorganic-organic hybrids exhibiting rich structural topologies. - Graphical abstract: Three alkaline earth-based coordination polymers were constructed from a semirigid cyclotriphosphazene-functionalized hexacarboxylate exhibiting different inorganic nodes as well as distinct ligand conformations relying on the metal ions, which presents the first example of such a ligand incorporated into alkaline earth–based coordination polymers. - Highlights: • Three alkaline earth-based coordination polymers were synthesized. • The three compounds exhibit different inorganic nodes and ligand conformations. • The three compounds are photoluminscent in the solid state.
The Lunar Sulfur Capture System (LSCS) protects in situ resource utilization (ISRU) hardware from corrosion, and reduces contaminant levels in water condensed for electrolysis. The LSCS uses a lunar soil sorbent to trap over 98 percent of sulfur gases and about two-thirds of halide gases evolved during hydrogen reduction of lunar soils. LSCS soil sorbent is based on lunar minerals containing iron and calcium compounds that trap sulfur and halide gas contaminants in a fixed-bed reactor held at temperatures between 250 and 400 C, allowing moisture produced during reduction to pass through in vapor phase. Small amounts of Earth-based polishing sorbents consisting of zinc oxide and sodium aluminate are used to reduce contaminant concentrations to one ppm or less. The preferred LSCS configuration employs lunar soil beneficiation to boost concentrations of reactive sorbent minerals. Lunar soils contain sulfur in concentrations of about 0.1 percent, and halogen compounds including chlorine and fluorine in concentrations of about 0.01 percent. These contaminants are released as gases such as H2S, COS, CS2,HCl, and HF during thermal ISRU processing with hydrogen or other reducing gases. Removal of contaminant gases is required during ISRU processing to prevent hardware corrosion, electrolyzer damage, and catalyst poisoning. The use of Earth-supplied, single-use consumables to entirely remove contaminants at the levels existing in lunar soils would make many ISRU processes unattractive due to the large mass of consumables relative to the mass of oxygen produced. The LSCS concept of using a primary sorbent prepared from lunar soil was identified as a method by which the majority of contaminants could be removed from process gas streams, thereby substantially reducing the required mass of Earth-supplied consumables. The LSCS takes advantage of minerals containing iron and calcium compounds that are present in lunar soil to trap sulfur and halide gases in a fixedbed reactor downstream of an in-ISRU process such as hydrogen reduction. The lunar-soil-sorbent trap is held at a temperature significantly lower than the operating temperature of the hydrogen reduction or other ISRU process in order to maximize capture of contaminants, but is held at a high enough temperature to allow moisture to pass through without condensing. The lunar soil benefits from physical beneficiation to remove ultrafine particles (to reduce pressure drop through a fixed bed reactor) and to upgrade concentrations of iron and/or calcium compounds (to improve reactivity with gaseous contaminants).
Chemical scandium isotope separation from calcium compounds containing radioactive calcium 48
Reduction of thermal conductivity is essential for obtaining high energy conversion efficiency in thermoelectric materials. We report on significant reduction of thermal conductivity in niobium-doped CaO(CaMnO{sub 3}){sub m} compounds for thermoelectric energy harvesting due to introduction of extra CaO-planes in the CaMnO{sub 3}-base material. We measure the thermal conductivities of the different compounds applying the laser flash analysis at temperatures between 300 and 1000 K, and observe a remarkable reduction in thermal conductivity with increasing CaO-planar density, from a value of 3.7 W·m{sup −1}K{sup −1} for m = ∞ down to 1.5 W·m{sup −1}K{sup −1} for m = 1 at 400 K. This apparent correlation between thermal conductivity and CaO-planar density is elucidated in terms of boundary phonon scattering, providing us with a practical way to manipulate lattice thermal conductivity via microstructural modifications.
The feasibility of using carbon dioxide as feedstock in precast concrete production is studied. Carbon dioxide reacts with calcium compounds in concrete, producing solid calcium carbonates in binding matrix. Two typical precast products are examined for their capacity to store carbon dioxide during the production. They are concrete blocks and fiber-cement panels. The two products are currently mass produced and cured by steam. Carbon dioxide can be used to replace steam in curing process to accelerate early strength, improve the long-term durability and reduce energy and emission. For a reaction within a 24-hour process window, the theoretical maximum possible carbon uptake in concrete is found to be 29% based on cement mass in the product. To reach the maximum uptake, a special process is developed to promote the reaction efficiency to 60-80% in 4-hour carbon dioxide curing and improve the resistance to freeze-thaw cycling and sulfate ion attack. The process is also optimized to meet the project target of $10/tCO 2 in carbon utilization. By the use of self-concentrating absorption technology, high purity CO 2 can be produced at a price below $40/t. With low cost CO 2 capture and utilization technologies, it is feasible to establish a network for carbon capture and utilization at the vicinity of carbon sources. If all block produces and panel producers in United States could adopt carbon dioxide process in their production in place of steam, carbon utilization in these two markets alone could consume more than 2 Mt CO 2 /year. This capture and utilization process can be extended to more precast products and will continue for years to come.
Calcium-ion batteries (CIBs) are a promising next-generation energy storage system given the low redox potential of calcium metal and high abundance of calcium compounds. For continued CIB development, the discovery of high energy density calcium ion cathodes is needed to achieve practical energy density values. Here, we report on the use of elemental Se as a promising candidate for a high-capacity cathode material for CIBs that operates via a conversion mechanism in a Ca metal battery at room temperature. The Se electrodes demonstrate a reversible specific capacity of 180 mA h g –1 with a discharge plateau near 2.0 V (vs Ca 2+ /Ca) at 100 mA g –1 using an electrolyte based on the salt calcium tetrakis(hexafluoroisopropyloxy)borate (Ca(B(hfip) 4 ) 2 ) in 1,2-dimethoxyethane (DME) and Ca metal. The reversible electrochemical reaction between calcium and selenium is investigated using operando synchrotron-based techniques and the possible reaction mechanism discussed.
Methods are described for impregnating coal with calcium carbonate by utilizing an aqueous phase ionic reaction between calcium acetate, calcium hydroxide, and water with CO.sub.2 contained within the coal. The coal is enriched in CO.sub.2 by contacting it with CO.sub.2 at high pressure, in either a continuous or pulsed mode. The inclusion of CO.sub.2 in the coal during the process does not involve evacuating the coal and subsequently absorbing CO.sub.2 onto the coal as in prior methods. Rather, the coal is treated with carbon dioxide at high pressure in a practical and viable approach. The impregnation of coal by calcium compounds not only reduces sulfur emissions by effectively tying up the sulfur as calcium sulfide or sulfate, but also increases the gasification or combustion rate. The invention also encompasses the use of other Group IIA elements, as well as the coal products resulting from the methods of treatment described.
The bulk Ca{sub 2}CrO{sub 4} samples were synthesized under high pressure and high temperature conditions using CaO and CrO{sub 2} as starting materials. The structure of the prepared Ca{sub 2}CrO{sub 4} solid is characterized by X-ray diffraction with Rietveld refinement as tetragonal structure with the space group I4{sub 1}/acd. The CrO{sub 6} octahedrons elongate along c axis and rotate in ab plane. DC and AC magnetic susceptibility measurement results indicate spin glass behavior at low temperature. Temperature dependence of resistivity measurement results show Ca{sub 2}CrO{sub 4} is an insulator at both ambient condition and high pressure.
In one aspect, a heterogeneous catalyst comprises calcium hydroxide and lanthanum hydroxide, wherein the catalyst has a specific surface area of more than about 10 m.sup.2/g. In another aspect, a heterogeneous catalyst comprises a calcium compound and a lanthanum compound, wherein the catalyst has a specific surface area of more than about 10 m.sup.2/g, and a total basicity of about 13.6 mmol/g. In further another aspect, a heterogeneous catalyst comprises calcium oxide and lanthanum oxide, wherein the catalyst has a specific surface area of more than about 10 m.sup.2/g. In still another aspect, a process for preparing a catalyst comprises introducing a base precipitant, a neutral precipitant, and an acid precipitant to a solution comprising a first metal ion and a second metal ion to form a precipitate. The process further comprises calcining the precipitate to provide the catalyst.
This study sheds light on the effect of alumina on dielectric constant and dielectric loss of novel CaCu{sub 3}Ti{sub 4}O{sub 12} composite ceramics. Alumina, at several concentrations, was deposited on the surface of CaCu{sub 3}Ti{sub 4}O{sub 12} particles via sol-gel technique. The dielectric constant significantly increased for all frequencies and the dielectric loss substantially decreased for low and intermediate frequencies. These observations were attributed to the change in characteristics of grains and grain boundaries. It was found that the insulating properties of the grain boundaries are improved following the addition of Al{sub 2}O{sub 3}. The relative density of CaCu{sub 3}Ti{sub 4}O{sub 12}/Al{sub 2}O{sub 3} composite ceramics decreased compared to the pure CaCu{sub 3}Ti{sub 4}O{sub 12} and the grain size was greatly changed with the alumina content affecting the dielectric properties. With the addition of alumina into CaCu{sub 3}Ti{sub 4}O{sub 12}, tighter interfaces formed. The 6%- and 10%-alumina ceramics showed the minimum dielectric loss and the maximum dielectric constant, respectively. Both the dielectric constant and loss tangent decreased in the 20%-alumina ceramic due to the formation of CuO secondary phase. It was revealed that Al serves as an electron acceptor decreasing the electron concentration, if Al{sup 3+} ions substitute for Ti{sup 4+} ions, and as an electron donor increasing the electron concentration, if Al{sup 3+} ions substitute for Ca{sup 2+} ions. We established a processing-microstructure-properties paradigm which opens new avenues for novel applications of CaCu{sub 3}Ti{sub 4}O{sub 12}/Al{sub 2}O{sub 3} composite ceramics.
Efforts to prepare Ca(O2) sub 2 from reactions of calcium compounds with 100% O3 and with O(D-1) atoms generated by photolysis of O3 at 2537 A are described. Samples of Ca(OH) sub 2, CaO, CaO2, Ca metal, and mixtures containing suspected impurities to promote reaction have been treated with excess O3 under static and flow conditions in the presence and absence of UV irradiation. Studies with KO2 suggest that the superoxide anion is stable to radiation at 2537 A but reacts with oxygen atoms generated by the photolysis of O3 to form KO3. Calcium superoxide is expected to behave in an analogous.
Calcium-ion batteries (CIBs) are a promising alternative to lithium-ion batteries (LIBs) due to the low redox potential of calcium metal and high abundance of calcium compounds. Due to its layered structure, α-MoO 3 is regarded as a promising cathode host lattice. While studies have reported that α-MoO 3 can reversibly intercalate Ca ions, limited electrochemical activity has been noted, and its reaction mechanism remains unclear. Here, we re-examine Ca insertion into α-MoO 3 nanoparticles with a goal to improve reaction kinetics and clarify the storage mechanism. The α-MoO 3 electrodes demonstrated a specific capacity of 165 mA h g –1 centered near 2.7 V vs Ca 2+ /Ca, stable long-term cycling, and good rate performance at room temperature. Furthermore, this work demonstrates that, under the correct conditions, layered oxides can be a promising host material for CIBs and renews prospects for CIBs.
Polycrystalline Bi{sub 2}Sr{sub 2}Ag{sub 0.03}Ca{sub 1}Cu{sub 2}O{sub y} samples were fabricated using conventional solid-state reaction method. Then, post-annealing temperatures at 730, 780 and 830 {sup ∘}C were applied on samples while time was kept constant at 50 h. Both the x-ray diffraction (XRD) measurement and the scanning electron microscopy (SEM) showed that all samples have high amounts of Bi-2212 phase as the main phase, indicating that the selected starting composition is suitable to analyze the post-annealing effects on the flux pinning properties of Bi-2212 superconductors. In particular, flux pinning performance of Bi-2212 phase is observed from both the magnetic hysteresis loops and J{sub c} values calculated using Bean’s model. The highest J{sub c} value was obtained for sample which was not exposed to the post-annealing treatment. The results clearly show that post-annealing procedure in Bi{sub 2}Sr{sub 2}Ag{sub 0.03}Ca{sub 1}Cu{sub 2}O{sub y} system does not create artificial pinning centres, which lead to the improvements in J{sub c} at high magnetic fields.
The paper reports on the temperature dependencies of the electrical resistivity and the a.c. magnetic susceptibility of the Tl{sub 0.8}Bi{sub 0.3}Sr{sub 1.8}Ba{sub 0.2}Ca{sub 2}Cu{sub 3}O{sub x} bulk superconductor measured in the area of the transition from the metallic to the superconducting state. From the resistivity data, the onset temperature T{sub c,onset}= 121.6 K, the critical temperature T{sub c50%}= 118.8 K, the zero resistance critical temperature obtained using E= 10{sup − 6} V/cm criterion T{sub c0}= 117.9 K, and the width of superconducting transition ΔT= 1.6 K were derived. The thermal fluctuations were examined using the formulae for the conductance: Δσ=Kε{sup −λ}, and for the magnetic susceptibility: χ = Cε{sup −λ}, where Δσ=1/R(T)−1/R{sub R}(T), ε= | (T − T{sub c})/T{sub c}|, λ is the critical exponent, and K and C are constants. The critical exponents in the transition region from the normal to the superconducting state were determined and analyzed. The three-dimensional fluctuations were found to occur in the vicinity of the zero-resistance critical temperature.
Flux pinning characteristics of Cu{sub 0.5}Tl{sub 0.5}Ba{sub 2}Ca{sub 3}Cu{sub 4}O{sub 12−δ} samples synthesized by two-step solid-state reaction method have been studied by physical properties measurement system (PPMS). These thin films are oriented along c-axis and have shown the tetragonal crystal structure. In the resistivity measurements, these samples have shown T{sub c} (R = 0) around 106 K. Asymmetric M vs. H loop of the samples at various temperature shows the interaction bulk and surface pinning. The energy of activation derived from the slope of Log(J{sub c}) vs. reduced temperature enhances with the increase strength of applied field. The irreversibility field suppress with the increase in the measurement temperature. The pinning energy per unit length of flux votex ε and the de-pinning force also suppress with increase of measurement temperature. The H{sub c1}, H{sub c}, and H{sub c2} (hence the H{sub irr}) are suppress with the increase of measurement temperature, since the H{sub c} determines the free energy difference between the normal and superconducting state. The increase in the H{sub c} at lower temperature shows that the density of superconducting electrons increases with the suppression of temperatures. The enhancement in the density of superconducting carriers at low temperatures would increase the coherence length and suppress the population of flux vortices. It can be seen in the form of decreased values of Ginzburg Landau parameter κ and the penetration depth λ{sub D}.