Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Probing Hydrogen-Bonding Interactions of Water Molecules Adsorbed on Silica, Sodium Calcium Silicate, and Calcium Aluminosilicate Glasses

Vibrational sum frequency generation (SFG) spectroscopy was used to study how hydrogen bonding interactions of physisorbed water layers vary with the glass composition and surface condition. Three different glass materials were used: amorphous silica (fused quartz), sodium calcium silicate (also called soda lime silica), and calcium aluminosilicate (boron-/fluorine-free E-glass). Two different surface conditions were compared: (i) a mechanically polished, fire-polished, and then annealed surface and (ii) an acid-leached surface (pH 1, 90 °C, 24 h). Compositional and structural information obtained by X-ray photoelectron spectroscopy, spectroscopic ellipsometry, and attenuated total reflection infrared spectroscopy were correlated with SFG spectral features. The temperature dependence of SFG spectral features revealed that regardless of the glass composition, the glass surface is free of physisorbed water at 250 °C, and during cooling in ambient air, it starts absorbing water at a temperature corresponding to a relative humidity of 1–2%. Humidity-controlled SFG measurements at room temperature showed that the hydrogen bonding interactions of water physisorbed on the glass surface cleaned with UV/O 3 are quite different depending on the glass composition and surface preparation history. This finding will be useful in understanding how surface properties of different glasses are altered by humidity in ambient air.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Relationship Between Dissolved Calcium and Total Calcium in Al-Killed Steels After Calcium Treatment

The variation of dissolved calcium content after calcium treatment in 37Mn5 pipeline steels was investigated. The content of [Ca] was calculated based on measured results of T.Ca and the composition of inclusions, which decreased from 16 to 0.07 ppm due to calcium vaporization. A comparison between the calculated and predicted [Ca] contents using Factsage indicated a good agreement. The effect of T.Ca, T.O., T.S, [Al]{sub s}, and temperature on [Ca] was also discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Intrinsic differences in atomic ordering of calcium (alumino)silicate hydrates in conventional and alkali-activated cements

The atomic structures of calcium silicate hydrate (C–S–H) and calcium (–sodium) aluminosilicate hydrate (C–(N)–A–S–H) gels, and their presence in conventional and blended cement systems, have been the topic of significant debate over recent decades. Previous investigations have revealed that synthetic C–S–H gel is nanocrystalline and due to the chemical similarities between ordinary Portland cement (OPC)-based systems and low-CO{sub 2} alkali-activated slags, researchers have inferred that the atomic ordering in alkali-activated slag is the same as in OPC–slag cements. Here, X-ray total scattering is used to determine the local bonding environment and nanostructure of C(–A)–S–H gels present in hydrated tricalcium silicate (C{sub 3}S), blended C{sub 3}S–slag and alkali-activated slag, revealing the large intrinsic differences in the extent of nanoscale ordering between C–S–H derived from C{sub 3}S and alkali-activated slag systems, which may have a significant influence on thermodynamic stability, and material properties at higher length scales, including long term durability of alkali-activated cements.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Metastable solubility and local structure of amorphous calcium carbonate (ACC)

The properties of amorphous calcium carbonate provide the foundation for understanding mineralization of calcified skeletons but inconsistencies between studies suggest the physical picture is incomplete. This study quantifies the metastable solubility and structure of ACC produced under a series of chemical conditions. Using complementary in situ methods that quantify ACC structure (in situ PDF analysis) in parallel with chemical composition (TGA, ICP-OES), we find two short-range structures are produced that also show distinct morphological differences. Conditions with high carbonate ion concentrations stabilize a Ca-rich ACC with short-range order that is independent of Mg content. In contrast, low carbonate solutions favor Mg-rich ACC with mixed Ca- and Mg-short range order. Measurements of solubility product determined from supersaturated and undersaturated conditions find the distinctive structures are related to solution carbonate activity while solubility is primarily determined by the magnesium content of the solid. Bulk solubility is a composite that concurs with established values. The findings demonstrate the type of ACC that forms is tuned by Mg2+ and CO3-2- concentration and suggest ACC structure, not bulk composition, is a reliable indicator of intermediate phase. This chemical framework also provides a basis for interpreting apparent differences between observations of ACC in synthetic and natural systems that reconciles previous structural studies.

Mergelsberg, Sebastian T.↗
DOE OSTI2026

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ca X ML: Chemistry‐informed machine learning explains mutual changes between protein conformations and calcium ions in calcium‐binding proteins using structural and topological features

Proteins' flexibility is a feature in communicating changes in cell signaling instigated by binding with secondary messengers, such as calcium ions, associated with the coordination of muscle contraction, neurotransmitter release, and gene expression. When binding with the disordered parts of a protein, calcium ions must balance their charge states with the shape of calcium-binding proteins and their versatile pool of partners depending on the circumstances they transmit. Accurately determining the ionic charges of those ions is essential for understanding their role in such processes. However, it is unclear whether the limited experimental data available can be effectively used to train models to accurately predict the charges of calcium-binding protein variants. Here, we developed a chemistry-informed, machine-learning algorithm that implements a game theoretic approach to explain the output of a machine-learning model without the prerequisite of an excessively large database for high-performance prediction of atomic charges. We used the ab initio electronic structure data representing calcium ions and the structures of the disordered segments of calcium-binding peptides with surrounding water molecules to train several explainable models. Network theory was used to extract the topological features of atomic interactions in the structurally complex data dictated by the coordination chemistry of a calcium ion, a potent indicator of its charge state in protein. Our design created a computational tool of Ca X ML, which provided a framework of explainable machine learning model to annotate ionic charges of calcium ions in calcium-binding proteins in response to the chemical changes in an environment. Our framework will provide new insights into protein design for engineering functionality based on the limited size of scientific data in a genome space.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Novel calcium recognition constructions in proteins: Calcium blade and EF-hand zone

Metal ions can regulate various cell processes being first, second or third messengers, and some of them, especially transition metal ions, take part in catalysis in many enzymes. As an intracellular ion, Ca{sup 2+} is involved in many cellular functions from fertilization and contraction, cell differentiation and proliferation, to apoptosis and cancer. Here, we have identified and described two novel calcium recognition environments in proteins: the calcium blade zone and the EF-hand zone, common to 12 and 8 different protein families, respectively. Each of the two environments contains three distinct structural elements: (a) the well-known characteristic Dx[DN]xDG motif; (b) an adjacent structurally identical segment, which binds metal ion in the same way between the calcium blade zone and the EF-hand zone; and (c) the following structurally variable segment, which distinguishes the calcium blade zone from the EF-hand zone. Both zones have sequence insertions between the last residue of the zone and calcium-binding residues in positions V or VI. The long insertion often connects the active and the calcium-binding sites in proteins. Using the structurally identical segments as an anchor, we were able to construct the classical calmodulin type EF-hand calcium-binding site out of two different calcium-binding motifs from two unrelated proteins.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

In situ TEM observation of calcium silicate hydrate nanostructure at high temperatures

Fire poses a substantial threat to concrete structures because calcium silicate hydrate (C-S-H) is not thermally stable at high temperatures. Herein, in situ TEM at temperatures from 20 to 800 °C was conducted to study the thermal-induced structural changes in C-S-H. We captured C-S-H shrinks at an average rate of 0.02 μm{sup 2}/{sup o}C upon heating with three stages observed, including induction, constant, and rapid periods. Our observation revealed that an 800 nm pore could be healed during pore structure evolution owing to the reconstruction and deformation among C-S-H blocks. The Ca/Si ratio was dropped at higher temperatures because of the leakage of calcium ions from the C-S-H structure to form CaO precipitates. The temperature-driven phase transformation and degradation were also detected using electron diffraction that C-S-H was transformed into metastable calcium silicate minerals above 800 °C. This work provides insights into the nanoscale transformation of C-S-H at high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Ordering of calcium and vacancies in calcium catapleiite CaZr[Si{sub 3}O{sub 9}] • 2H{sub 2}O

A sample of holotypic calcium catapleiite from the Burpala alkaline massif (Northern Baikal, Russia) is studied by single crystal X-ray analysis at 120 K and IR spectroscopy. The empirical formula of calcium catapleiite is Ca{sub 0.97}Na{sub 0.02}Zr{sub 1.01}Si{sub 3}O{sub 9} • 2H{sub 2}O (Z = 4). The X-ray diffraction study confirms the orthorhombic unit cell with the following parameters: a = 7.406(1), b = 12.687(1), and c = 10.112(1) Å; V = 950.1(2) Å{sup 3}; space group Pbnn. The crystal structure is refined in the anisotropic approximation of atomic displacement parameters using 1177 reflections with I > 2σ(I) to the final R = 2.91%. The structure of calcium catapleiite under study is based on the microporous heteropolyhedral framework formed by ZrO{sub 6} octahedra and threemembered silicon–oxygen rings [Si{sub 3}O{sub 9}]. It is on the whole analogous to the structures of the samples studied earlier, but differs from them by a high degree of ordering of calcium and vacancies at extraframework positions. The distribution of calcium over Ca1 and Ca2 positions in the calcium catapleiite structure leads to the formation of zigzag chains of the …Ca1–Zr–Ca1–Zr… and …Ca2–h–Ca2–□… types. Low occupancy of the Ca2 position and its alternation with the vacancy are prerequisites for potential Ca{sup 2+} cationic conduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Phase Evolution and Textural Changes during the Direct Conversion and Storage of CO 2 to Produce Calcium Carbonate from Calcium Hydroxide

The increasing use of energy resources recovered from subsurface environments and the resulting carbon imbalance in the environment has motivated the need to develop thermodynamically downhill pathways to convert and store CO 2 as water-insoluble calcium or magnesium carbonates. While previous studies extensively explored aqueous routes to produce calcium and magnesium carbonates from CO 2 , there is limited scientific understanding of the phase evolution and textural changes during the direct gas–solid conversion routes to produce calcium carbonate from calcium hydroxide, which is one of the abundant constituents of alkaline industrial residues. With increasing interest in developing integrated pathways for capturing, converting, and storing CO 2 from dilute flue gases, understanding the composition of product phases as they evolve is essential for evaluating the efficacy of a given processing route. Therefore, in this study, we investigate the phase evolution and the corresponding textural changes as calcium hydroxide is converted to calcium carbonate under the continuous flow of CO 2 at an ambient pressure of 1 atm with continuous heating from 30 °C to 500 °C using in-operando wide angle X-ray scattering (WAXS), small angle X-ray scattering (SAXS), and ultrasmall angle X-ray scattering (USAXS) measurements.

Liu, Meishen↗
DOE OSTI2016

Calcium and lithium ion production for laser ion source

Calcium and lithium ion beams are required by NASA Space Radiation Laboratory at Brookhaven National Laboratory to simulate the effects of cosmic radiation. To identify the difficulties in providing such highly reactive materials as laser targets, both species were experimentally tested. Plate shaped lithium and calcium targets were fabricated to create ablation plasmas with a 6 ns 1064 nm neodymium-doped yttrium aluminum garnet laser. We found significant oxygen contamination in both the Ca and Li high charge state beams due to the rapid oxidation of the surfaces. A large spot size, low power density laser was used to create low charge state beams without scanning the targets. The low charge state Ca beam did not have any apparent oxygen contamination, showing the potential to clean the target entirely of oxide with a low power beam once in the chamber. The Li target was clearly still oxidizing in the chamber after each low power shot. To measure the rate of oxidation, we shot the low power laser at the target repeatedly at 10 s, 30 s, 60 s, and 120 s interval lengths, showing a linear relation between the interval time and the amount of oxygen in the beam.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Calcium-metal alloy anode materials for reversible calcium-ion batteries

Calcium ion batteries are provided. The calcium ion batteries include a cathode, an alloying anode composed of one or more intermetallic calcium compounds in electrical communication with the cathode; and an electrolyte disposed between the anode and the cathode. The intermetallic calcium compounds are intermetallic compounds of calcium and transition metals and metalloids.

Yao, Zhenpeng↗
DOE OSTI2014

Precipitation of calcium carbonate and calcium phosphate under diffusion controlled mixing

Multi-component mineral precipitation in porous, subsurface environments is challenging to simulate or engineer when in situ reactant mixing is controlled by diffusion. In contrast to well-mixed systems, the conditions that favor mineral precipitation in porous media are distributed along chemical gradients, which evolve spatially due to concurrent mineral precipitation and modification of solute transport in the media. The resulting physical and chemical characteristics of a mixing/precipitation zone are a consequence of coupling between transport and chemical processes, and the distinctive properties of individual chemical systems. We examined the spatial distribution of precipitates formed in “double diffusion” columns for two chemical systems, calcium carbonate and calcium phosphate. Polyacrylamide hydrogel was used as a low permeability, high porosity medium to maximize diffusive mixing and minimize pressure- and density-driven flow between reactant solutions. In the calcium phosphate system, multiple, visually dense and narrow bands of precipitates were observed that were reminiscent of previously reported Liesegang patterns. In the calcium carbonate system, wider precipitation zones characterized by more sparse distributions of precipitates and a more open channel structure were observed. In both cases, formation of precipitates inhibited, but did not necessarily eliminate, continued transport and mixing of the reactants. A reactive transport model with fully implicit coupling between diffusion, chemical speciation and precipitation kinetics, but where explicit details of nucleation processes were neglected, was able to qualitatively simulate properties of the precipitation zones. The results help to illustrate how changes in the physical properties of a precipitation zone depend on coupling between diffusion-controlled reactant mixing and chemistry-specific details of precipitation kinetics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Concentration-dependent ion correlations impact the electrochemical behavior of calcium battery electrolytes.

Ion interactions strongly determine the solvation environments of multivalent electrolytes even at concentrations below that required for practical battery-based energy storage. This statement is particularly true of electrolytes utilizing ethereal solvents due to their low dielectric constants. These solvents are among the most commonly used for multivalent batteries based on reactive metals (Mg, Ca) due to their reductive stability. Recent developments in multivalent electrolyte design have produced a variety of new salts for Mg2+ and Ca2+ that test the limits of weak coordination strength and oxidative stability. Such electrolytes have great potential for enabling full-cell cycling of batteries based on these working ions. However, the ion interactions in these electrolytes exhibit significant and non-intuitive concentration relationships. In this work, we investigate a promising exemplar, calcium tetrakis(hexafluoroisopropoxy)borate (Ca(BHFIP)(2)), in the ethereal solvents 1,2-dimethoxyethane (DME) and tetrahydrofuran (THF) across a concentration range of several orders of magnitude. Surprisingly, we find that effective salt dissociation is lower at relatively dilute concentrations (e.g. 0.01 M) than at higher concentrations (e.g. 0.2 M). Combined experimental and computational dielectric and X-ray spectroscopic analyses of the changes occurring in the Ca2+ solvation environment across these concentration regimes reveals a progressive transition from well-defined solvent-separated ion pairs to de-correlated free ions. This transition in ion correlation results in improvements in both conductivity and calcium cycling stability with increased salt concentration. Comparison with previous findings involving more strongly associating salts highlights the generality of this phenomenon, leading to important insight into controlling ion interactions in ether-based multivalent battery electrolytes.

Hahn, Nathan T.↗