Nuclear Data Sheets for A = 111
This evaluation for A = 111 updates one by J. Blachot, (2003Bl10), published in Nuclear Data Sheets 100, 179 (2003)
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This evaluation for A = 111 updates one by J. Blachot, (2003Bl10), published in Nuclear Data Sheets 100, 179 (2003)
Experimental results on the excitation of isomeric nuclear states in the reactions {sup 111}Cd(γ, γ′){sup 111m}Cd, {sup 113}In(γ, γ′){sup 113m}In, and {sup 115}In(γ, γ′){sup 115m}In studied by the activation method at photon energies of up to 8 MeV are presented. The respective experiments were performed at the LUE-8 linear electron accelerator of the Institute for Nuclear Research (INR, Moscow). A method for calculating cross sections per equivalent photon was developed with the aid of a simulation on the basis of the GEANT-4 code. The data obtained in this way are discussed from the point of view of the possibility of studying collective nuclear excitations of various multipolarity near the threshold.
We use the time-differential perturbed angular correlation technique to study nuclear electric quadrupole hyperfine interactions of probe {sup 111}Cd nuclei in cerium lattice sites at room temperature under pressures up to 8 GPa. We have found that the well known {gamma} {sup {yields} {alpha}} phase transition in cerium is not isostructural. In {alpha}-Ce, the probe {sup 111}Cd nuclei reveal a quadrupole electron charge density component that is absent in {gamma}-Ce. The hidden spacial structure of electronic quadrupoles in {alpha}-Ce is triple-q antiferroquadrupolar, as was suggested in [14]. We relate our findings to the current understanding of the {gamma} {sup {yields} {alpha}} phase transition and also report on nuclear quadrupole interactions in other high-pressure phases of cerium: {alpha}'' (C2/m space symmetry) and {alpha}' ({alpha}-U structure).
A procedure for measuring photonuclear-reaction cross sections by employing the method of quasimonochromatization of the bremsstrahlung photon spectrum is developed. This procedure permits determining reaction cross sections via measuring the reaction yield at three fixed values of the electron energy. The procedure is equivalent to measuring the cross section in question for quasimonochromatic photons. Bremsstrahlung-photon spectra are obtained using state-of-the-art simulation means involving the GEANT4 code as applied to a specific experiment with allowance for its geometry, target thicknesses, electron-beam parameters, etc. The results obtained by simulating quasimonochromatic distributions of bremsstrahlung photons are presented for experiments at the LUE-8-5 linear electron accelerator of Institute for Nuclear Research (Moscow, Russian Academy of Sciences). These results are found to be in good agreement with the experimental energy distribution of the cross section for the reaction {sup 111}Cd(γ, γ') in the energy range between 5 and 8 MeV.
The magnetic hyperfine field (B{sub hf}) in ferrimagnetic GdCo{sub 5} compound has been investigated as a function of temperature by Mössbauer effect (ME) spectroscopy and perturbed angular correlation (PAC) spectroscopy using {sup 119}Sn and {sup 111}Cd probe nuclei, respectively. Results show that the non-magnetic probe atoms {sup 119}Sn and {sup 111}Cd substitute all three non-equivalent positions in GdCo{sub 5}: Gd, Co{sub I}, and Co{sub II}. For {sup 119}Sn and {sup 111}Cd probes at Gd sites, the saturation magnetic hyperfine fields are very different with values of B{sub hf1} = 57.0(1) T and B{sub hf1}= 20.7(1) T, respectively. For {sup 119}Sn and {sup 111}Cd atoms localized at Co{sub I} and Co{sub II} sites the magnetic hyperfine fields are practically identical and, in saturation, reach the values of B{sub hf2} = 11.6(1) T and B{sub hf2} = 11.1(2) T, and B{sub hf3} = 14.8(1) T and B{sub hf3} = 14.4(2) T, respectively.
The magnetic behavior of the intermetallic compound NdMn{sub 2}Ge{sub 2} was investigated by bulk magnetization measurements and measurements of hyperfine interactions using perturbed γ–γ angular correlation (PAC) spectroscopy. Magnetization measurements indicate the presence of four magnetic transitions associated with the Mn and Nd magnetic sublattices. At high temperatures, magnetic measurements show a change in the slope of the magnetization due to an antiferromagnetic transition around T{sub N} ∼ 425 K and a well defined ferromagnetic transition at T{sub C} ∼ 320 K. Moreover, at ∼210 K a peak is observed in the magnetization curve, which is assigned to the reorientation of the Mn spin, and at ∼25 K an increase in the magnetic moment is also observed, which is ascribed to the ordering of Nd ions. PAC measurements using {sup 140}La({sup 140}Ce) and {sup 111}In({sup 111}Cd) probe nuclei allowed the determination of the temperature dependence of the magnetic hyperfine field (B{sub hf}) at Nd and Mn sites, respectively. PAC results with {sup 111}Cd probe nuclei at Mn sites show that the dependence of B{sub hf} with temperature follows the expected behavior for the host magnetization associated with the magnetic ordering of Mn ions. From these results, the antiferromagnetic transition followed by a ferromagnetic ordering is clearly observed. PAC results with {sup 140}Ce probe nuclei at Nd sites, however, showed a strong deviation from the Brillouin function, which is attributed to the Ce 4f-electron contribution to B{sub hf}.
This work presents an atomic scale study of the electric field gradient (EFG) in the tetragonally distorted CdMn{sub 2}O{sub 4} spinel manganite. The EFG temperature dependence at the Cd and Mn sites was followed via perturbed angular correlation measurements with the {sup 111}In and {sup 111m}Cd probes, from 873 down to 12 K at Isolde-CERN. The results show that in the 12–600 K temperature range, a single Jahn-Teller distorted local phase exists. However above 100 K, a dynamic lattice distortion, evidenced by time dependent EFG fluctuations, sets in suggesting a structural instability. Above 600 K, a local MnO{sub 6} octahedra with relaxed Jahn-Teller distortions emerge and grow in the low temperature matrix, although no macroscopic tetragonal to cubic phase transition was observed.
The temperature dependence of the magnetic hyperfine field (B{sub hf}) at Mn atom sites was measured in LaMn{sub 2}(Si{sub (1−x)}Ge{sub x}){sub 2}, with 0 ≤ x ≤ 1, compounds with perturbed γ−γ angular correlation spectroscopy using {sup 111}In({sup 111}Cd) as probe nuclei in the temperature range from 20 K to 480 K. The results show a transition from antiferromagnetic to ferromagnetic ordering for all studied compounds when Ge gradually replaces Si and allowed an accurate determination of the Néel temperature (T{sub N}) for each compound. It was observed that T{sub N} decreases when Ge concentration increases. Conversely, the Curie temperature increases with increase of Ge concentration. This remarkable change in the behavior of the transition temperatures is discussed in terms of the Mn-Mn distance and ascribed to a change in the exchange constant J{sub ex}.
The magnetic behavior of Gd{sub 2}O{sub 3} nanoparticles, produced by thermal decomposition method and subsequently annealed at different temperatures, was investigated by magnetization measurements and, at an atomic level, by perturbed γ − γ angular correlation (PAC) spectroscopy measuring hyperfine interactions at {sup 111}In({sup 111}Cd) probe nuclei. Nanoparticle structure, size and shape were characterized by X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM). Magnetization measurements were carried out to characterize the paramagnetic behavior of the samples. XRD results show that all samples crystallize in the cubic-C form of the bixbyite structure with space group Ia3. TEM images showed that particles annealed at 873 K present particles with highly homogeneous sizes in the range from 5 nm to 10 nm and those annealed at 1273 K show particles with quite different sizes from 5 nm to 100 nm, with a wide size distribution. PAC and magnetization results show that samples annealed at 873 and 1273 K are paramagnetic. Magnetization measurements show no indication of blocking temperatures for all samples down to 2 K and the presence of antiferromagnetic correlations.
In this paper, the local magnetic properties of La-doped Fe{sub 3}O{sub 4} (5% and 10%) bulk and Nanoparticles (NPs) samples were studied by measuring hyperfine interactions in a wide range of temperature from 10 to 900 K with perturbed γ-γ angular correlation spectroscopy using {sup 111}In({sup 111}Cd) and {sup 140}La({sup 140}Ce) as probe nuclei. Results for the temperature dependence of the magnetic hyperfine field (B{sub hf}) for bulk and NP samples, pure and doped with La show that its behavior follows a second order Brillouin-like transition from which the Curie temperature (T{sub C}) was determined (T{sub C} ∼ 855 K). Results also show two different regions in NP samples: the core where a minor fraction of probe nuclei with well defined magnetic dipole frequency was observed and the shell where a major fraction with broad distributed electric quadrupolar frequency (surface effect in NP) was observed. The Verwey transition T{sub V} ∼ 120 K, due the order disorder phase, was also observed in all samples. The results are discussed in terms of the magnetic exchange interaction between Fe{sup 2+} and Fe{sup 3+} ions in the two regions of NP.
A synergistic approach that incorporates first-principles atomistic modeling with numerical device simulations is used to systematically evaluate the role of heterointerfaces within metal-chalcogenide-based photovoltaic technologies. Two interfaces involving either a tellurium back contact or aluminum back electrode combined with a cadmium telluride absorber layer within cadmium-telluride-based thin-film solar cells are investigated on an atomic scale to determine the mechanisms contributing to variations in device performance. Electronic structures and predicted charge transport behavior with respect to cadmium and tellurium termination of the absorber layer are studied along the polar oriented CdTe{111} facets. The computational methodology reveals a noticeable contrast between the Schottky barrier forming Al/CdTe interface versus the Type I Te/CdTe heterojunction. Greater band bending features are exhibited by the cadmium termination as opposed to the tellurium termination for each interface case. Subsequent device modeling suggests that 3.6% higher photovoltaic conversion efficiency is achievable for the cadmium termination relative to the tellurium termination of the Te/CdTe interface. Based strictly on an idealistic representation, both interface models show the importance of atomic-scale interfacial properties for cadmium telluride solar cell device performance with their bulk properties being validated in comparison to published experimental data. Here, the synergistic approach offers a suitable method to analyze solar cell interfaces through a predictive computational framework for the engineering and optimization of metal-chalcogenide-based thin-film photovoltaic technologies.
We studied Bragg diffraction and Thermal Diffuse Scattering (TDS) from a Si(111) channel-cut triple-bounce crystal using the time-of-flight technique at a pulsed neutron source. Cadmium shielding restricted the detector s direct view of the first bounce surface. The channel-cut crystal dramatically suppresses TDS in the vicinity of the (111), (333) and (444) Bragg reflections; however, TDS appears and increases with the decrease of wavelength in the range of the (555), (777) and (888) orders where cadmium becomes transparent and the single-bounce reflections and TDS contaminate the triple-bounce (555), (777) and (888) reflections.
Single phase Cd{sub 0.6}Zn{sub 0.4}Te (CdZnTe) films of 1 μm thickness were deposited by radio frequency planar magnetron sputter deposition on commercial soda lime glass samples coated with fluorine-doped tin oxide and cadmium sulphide (CdS). The stack was then treated with cadmium chloride (CdCl{sub 2}) at different temperatures using a constant treatment time. The effect of the CdCl{sub 2} treatment was studied using optical, materials, and electrical characterization of the samples and compared with the as-deposited CdZnTe film with the same stack configuration. The band gap deduced from Tauc plots on the as-deposited CdZnTe thin film was 1.72 eV. The deposited film had good crystalline quality with a preferred orientation along the {111} plane. After the CdCl{sub 2} treatment, the absorption edge shifted toward longer wavelength region and new peaks corresponding to cadmium telluride (CdTe) emerged in the x-ray diffraction pattern. This suggested loss of zinc after the CdCl{sub 2} treatment. The cross sectional transmission electron microscope images of the sample treated at 400 °C and the energy dispersive elemental maps revealed the absence of chlorine along the grain boundaries of CdZnTe and residual CdTe. The presence of chlorine in the CdTe devices plays a vital role in drastically improving the device performance which was not observed in CdZnTe samples treated with CdCl{sub 2}. The loss of zinc from the surface and incomplete recrystallization of the grains together with the presence of high densities of stacking faults were observed. The surface images using scanning electron microscopy showed that the morphology of the grains changed from small spherical shape to large grains formed due to the fusion of small grains with distinct grain boundaries visible at the higher CdCl{sub 2} treatment temperatures. The absence of chlorine along the grain boundaries, incomplete recrystallization and distinct grain boundaries is understood to cause the poor performance of the fabricated devices.
The Cadmium oxide (CdO) and Fluorine (F) doped CdO thin films were effectively synthesized on glass substrates for different F doping concentrations (2, 4, 6, 8 at.%) using nebulized spray pyrolysis technique. The XRD analysis showed that all the films were polycrystalline having cubic structure with (111) preferential orientation. It was seen from the SEM photographs that the doping causes remarkable changes in the surface morphology. EDAX analysis clearly confirmed that the presence of expected elements cadmium, oxygen and fluorine in the final product, in appropriate proportions. The electrical study showed that the minimum resistivity value of 1.9 × 10{sup −4} Ω cm with notable higher values of carrier concentration and mobility was achieved for 6 at.% of CdO:F film. Optical study exhibited that the band gap value of CdO film increases gradually with the increase in F-doping concentration, reaching maximum band gap value of 2.61 eV at 6 at.% and starts decreasing thereafter. Photoluminescence spectra depicted that the intensity of the emission peaks was significantly varied with doping concentrations. The high transparency, wide band gap energy, enhanced electrical properties and light sensitivity had been obtained infer that F-doped CdO thin films which find application in optoelectronic applications. Graphical abstract: .
Analysis of high statistics triple coincidence fission γ data from {sup 252}Cf at Gammasphere including angular correlations yielded well-expanded high-spin level schemes with more complete and reliable spin/parity assignments for {sup 82}Ge, {sup 118,120,122}Cd and {sup 114,115}Rh. Both the quasi-particle/hole couplings and quasi-rotational degrees of freedom are implied to play roles in these Cd isotopes. Evidence for triaxial shapes and octupole components in the Cd isotopes is presented. These Cd isotopes may have triaxial deformations. High-spin level schemes of {sup 114,115}Rh have been established for the first time. The existence of a relatively large signature splitting and an yrare band shows typical features of a triaxially deformed nucleus. Possible excited deformed rotational bands are observed, for the first time, in {sup 82}Ge. From the multipole mixing ratio measurement, the ground state configurations of {sup 109,111}Ru, as well as excited states in {sup 103,107}Mo and {sup 111}Ru were determined.
The isotopic composition of cadmium in nuclear debris was measured by multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS). Mass-independent perturbations due to fission product decay on the isotopes of Cd were observed. Relative fission yields for masses 111, 112, 114 and 116 were determined in each sample of nuclear debris and compared with reported values found in irradiated plutonium and uranium fuels. Mass spectrometry measurements of the valley fission product endpoints are extremely challenging due to the low cumulative fission yields and small amounts of each isotope that are produced. To overcome these challenges, a new purification method for Cd was developed and validated by examination of a number of geological reference materials.
Functionalization of the extracellular polymers (EPS) of a marine bacterium Pseudomonas aeruginosa N6P6 was carried out for cadmium (Cd) bioadsorption from an aqueous solution which led to the synthesis of cadmium sulfide (CdS) nanoparticles (NPs). Characterization of pristine, functionalized and Cd-treated functionalized EPS was accomplished by ATR-FTIR spectroscopy which illustrated Cd binding with the sulfhydryl (–SH) group. The XRD pattern confirmed the presence of CdS NPs on the functionalized EPS with diffraction peaks at 2θ = 27.45° and 32.66° indexed to (111) and (220) planes of cubic phase CdS. Maximum Cd adsorption was observed by the functionalized EPS which removed 88.86 ± 0.65% of Cd at pH 6.6 in 48 h. However, pristine EPS and bacterial cell biomass removed 83.61 ± 0.50% and 29.75 ± 0.73% of Cd respectively from aqueous solution. The experimental data of Cd adsorption thermodynamics by functionalized EPS fitted in Langmuir isotherm model. CdS NPs synthesis by functionalized EPS was evident by UV–Vis spectrum with a characteristic peak at 462 nm and Transmission electron microscopy with an average diameter of 8–10 nm. This work delivers an environment-friendly approach for efficient Cd removal from aqueous solution in the form of CdS NPs synthesis.
Influence of deposition pressure on structural, morphology, electrical and optical properties of CdTe thin films deposited at low substrate temperature (100°C) by RF magnetron sputtering was investigated. The formation of CdTe was confirmed by low angle XRD and Raman spectroscopy. The low angle XRD analysis revealed that the CdTe films have zinc blende (cubic) structure with crystallites having preferred orientation in (111) direction. Raman spectra show the longitudinal optical (LO) phonon mode peak ∼ 165.4 cm{sup -1} suggesting high quality CdTe film were obtained over the entire range of deposition pressure studied. Scanning electron microscopy analysis showed that films are smooth, homogenous, and crack-free with no evidence of voids. The EDAX data revealed that CdTe films deposited at low deposition pressure are high-quality stoichiometric. However, for all deposition pressures, films are rich in Cd relative to Te. The UV-Visible spectroscopy analysis show the blue shift in absorption edge with increasing the deposition pressure while the band gap show decreasing trend. The highest electrical conductivity was obtained for the film deposited at deposition pressure 1 Pa which indicates that the optimized deposition pressure for our sputtering unit is 1 Pa. Based on the experimental results, these CdTe films can be useful for the application in the flexible solar cells and other opto-electronic devices.