Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boundary Layer Transition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Observation and Simulation of Methane Plumes During the Morning Boundary Layer Transition

Abstract Methane (CH 4 ) contributes significantly to global warming. However, accurate identification of CH 4 sources for reducing CH 4 emissions is often hampered by inadequate accuracy and spatiotemporal coverage of CH 4 detection, and lack of accurate CH 4 forward modeling used in top‐down inversion systems. In this study, a field experiment was conducted in Pampa, Texas using two CH 4 sensors (LI‐COR and OGI camera) to detect CH 4 releases. We investigated whether high‐resolution simulations using the Weather Research and Forecasting (WRF) model with greenhouse gases (WRF‐GHG) could accurately simulate the CH 4 plumes in the presence of evolving atmospheric boundary layer from sunrise to noon. CH 4 plumes showed substantial variation in time. At a release rate of ∼17.5 kg hr −1 , the maximum enhancement of CH 4 measured by LI‐COR was 2.6 ppm at sunrise (7:36 a.m.), 250 m from the release location. Within half an hour after sunrise, this enhancement decreased to 0.3–0.4 ppm. The enhancement was 0.2 ppm by 10:00 a.m. and further dropped to less than 0.1 ppm after 11:30 a.m. Due to the low temperature at sunrise, the OGI camera failed to detect the CH 4 plume. The WRF‐GHG large‐eddy simulation (LES) with 32 m grid spacing successfully reproduced these CH 4 enhancements. In situ measurements together with numerical simulations illustrate the impact of the transition from a stable boundary layer in the early morning to a convective boundary layer at noon on the dispersion of CH 4 plumes. Additionally, CH 4 plumes from a cattle farm in Oklahoma are briefly examined using the same modeling approach.

Hu, Xiao‐Ming [Center for Analysis and Prediction ↗
DOE OSTI2024

62°S Witnesses the Transition of Boundary Layer Marine Aerosol Pattern Over the Southern Ocean (50°S–68°S, 63°E– 150°E) During the Spring and Summer: Results From MARCUS (I)

The Atmospheric Radiation Measurement Mobile Facility-2 was installed onboard the research vessel Aurora Australis to measure aerosol properties during the 2017-2018 Measurement of Aerosols, Radiation, and CloUds over the pristine Southern ocean (MARCUS) Experiment, providing unique data on aerosols latitudinal and seasonal variation, including south of 60 degrees S where previous observations are scarce. Data from a Cloud Condensation Nuclei (CCN) counter and Ultra-High-Sensitivity Aerosol Spectrometer show that both the number concentration (N-CCN) and size distribution of CCN-active aerosols, with diameters (D) between 60 nm < D < 1,000 nm are different over the North Southern Ocean (NSO) (50 degrees S-60 degrees S) and the South Southern Ocean (SSO) (62 degrees S-68 degrees S). The average NSO N-CCN at 0.2% and 0.5% supersaturation were 28% and 49% less than that over the SSO. This increase of CCN over the SSO is caused by the increase of aerosols with 60 nm < D < 200 nm, consistent with calculations of Aerosol Scattering Angstrom Exponents derived from a nephelometer. Aerosol hygroscopicity growth factor measured by the Hygroscopic Tandem Differential Mobility Analyzer stayed close to 1.41 for aerosols with 50 nm < D < 250 nm over the SSO, but increased from 1.30 to 1.67 over the NSO, indicating different chemical compositions. Both CCN and Ice Nucleating Particles (INPs) showed a stronger variation with season than with latitude. The variation of heat-labile and presumably proteinacous INPs suggests an increase of ice nucleating-active microbes in summer.

Niu, Qing↗
DOE OSTI2023

Cloud‐Surface Coupling Alters the Morning Transition From Stable to Unstable Boundary Layer

Abstract Due to surface heating, the morning boundary layer transits from stable to neutral or convective conditions, exerting critical influences on low tropospheric thermodynamics. Low clouds closely interact with the boundary layer development, yet their interactions bear considerable uncertainties. Our study reveals that cloud‐surface coupling alters the morning transition from stable to unstable boundary layer and thus notably affects the diurnal variation of the boundary layer. Specifically, due to the reduction in surface fluxes, decoupled clouds can delay the process of eroding nocturnal inversion by 0.8‐hr and even prevent the transition of the boundary layer from happening for 12% of decoupled cases, keeping the boundary layer in a stable state during the noontime. On the other hand, when clouds are coupled with the surface, cloud‐top radiative cooling can directly cool the upper boundary layer to facilitate sub‐cloud convection, leading to an unstable boundary layer in the earlier morning.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Coupling of Laminar-Turbulent Transition with RANS Computational Fluid Dynamics

This project combines several new concepts to create a boundary layer transition prediction capability that is suitable for analyzing modern hypersonic flight vehicles. The first new concept is the use of ''optimization'' methods to detect the hydrodynamic instabilities that cause boundary layer transition; the use of this method removes the need for many limiting assumptions of other methods and enables quantification of the interactions between boundary layer instabilities and the flow field imperfections that generate them. The second new concept is the execution of transition analysis within a conventional hypersonics CFD code, using the same mesh and numerical schemes for the transition analysis and the laminar flow simulation. This feature enables rapid execution of transition analysis with less user oversight required and no interpolation steps needed.

42 ENGINEERING↗
DOE OSTI2025

Characterizing Near-Surface Moisture Increase during the Clear-Sky Afternoon-to-Evening Transition Using a Single-Column Model

The afternoon-to-evening transition is the period when the atmospheric boundary layer transitions from convective to stable conditions. One noticeable feature during this transition period is the rapid increase in water vapor concentration near the surface. However, the mechanism behind the increase in water vapor remains poorly understood. This study investigated the processes contributing to the water vapor increase and the impacts of the land cover and horizontal advection on the water vapor increase using a single-column model for the clear-sky condition. Numerical experiments were conducted on three cases at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site. Evapotranspiration was found to be the main moisture source to the water vapor increase, and that change of the near-surface vertical temperature gradient from negative to positive is the trigger for this increase during the afternoon-to-evening transition. This is because the near-surface turbulence divergence term decreases due to the change in the buoyancy profile caused by vertical temperature gradient change. The impact of horizontal advection on water vapor varies, and it can either lead to an increase or a decrease in water vapor, depending on the spatial horizontal water vapor gradient. This study also found that land cover can influence the timing of the water vapor increase since different land covers may have different Bowen ratios. Water vapor increases earlier under conditions with smaller Bowen ratios compared to those with larger values.

Atmosphere-land interaction↗
DOE OSTI2020

HTR solver: An open-source exascale-oriented task-based multi-GPU high-order code for hypersonic aerothermodynamics

In this study, the open-source Hypersonics Task-based Research (HTR) solver for hypersonic aerothermodynamics is described. The physical formulation of the code includes thermochemical effects induced by high temperatures (vibrational excitation and chemical dissociation). The HTR solver uses high-order TENO-based spatial discretization on structured grids and efficient time integrators for stiff systems, is highly scalable in GPU-based supercomputers as a result of its implementation in the Regent/Legion stack, and is designed for direct numerical simulations of canonical hypersonic flows at high Reynolds numbers. Additionally, the performance of the HTR solver is tested with benchmark cases including inviscid vortex advection, low- and high-speed laminar boundary layers, inviscid one-dimensional compressible flows in shock tubes, supersonic turbulent channel flows, and hypersonic transitional boundary layers of both calorically perfect gases and dissociating air.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Assessment and Improvement of the SST-Gamma Transition Model in Nalu-Wind

We conduct laminar–turbulent boundary-layer transition simulations using a local correlation-based transition model for two-dimensional incompressible flow and present enhancements to improve the accuracy of transition predictions. Menter’s Galilean-invariant 𝛾 transition model is implemented in the incompressible, unstructured-grid flow solver Nalu-Wind and is validated against experimental data and results from NASA’s flow solvers. The test cases of the AIAA Transition Prediction and Modeling Workshop are investigated, namely, the T3A/T3B flat plates and the NLF(1)-0416 and S809 airfoils. Based on the results, best practices for transition simulations, particularly for an unstructured-grid flow solver, are identified. Additional airfoil simulations are conducted for two wind turbine airfoils, S822 at Reynolds numbers of 𝑂⁡(10 5 ) and DU00-W-212 at Reynolds numbers of 𝑂⁡(10 7 ), to assess the model at low and high Reynolds numbers. Furthermore, through this work, we propose several approaches to enhance transition simulations, including 1) enforcing positivity of the implicit operator for the source terms of the transition model, 2) employing a constant turbulence intensity in stationary external flow simulations, and 3) recommending meshing for unstructured-grid flow solvers. Finally, we provide detailed documentation of the validation and data for the canonical cases to the transition modeling community.

17 WIND ENERGY↗
DOE OSTI2020

The Effects of Wind Veer During the Morning and Evening Transitions

Direction and speed wind shear modify turbine performance by changing inflow conditions on turbine blades. Using observations from the 2013 CWEX campaign, we found the daily atmospheric boundary layer transitions (morning and evening) match periods of high electricity demand for a wind farm in central Iowa. Power production during these periods was undermined for large direction shear and low speed shear scenarios. The morning transition displayed larger direction shear over the rotor layer for most wind speeds compared to the evening period. This resulted in lower turbine performance for the morning compared to the evening and whole day. This study shows that the combined effect of direction and speed shear is affecting turbine operation during high electricity demand times of day, predominantly during the morning at this wind farm.

17 WIND ENERGY↗
DOE OSTI2023

Direct Numerical Simulation of Transitional and Turbulent Flows Over Multi-Scale Surface Roughness—Part II: The Effect of Roughness on the Performance of a High-Pressure Turbine Blade

Abstract Turbine blades generally present surface roughness introduced in the manufacturing process or caused by in-service degradation, which can have a significant impact on aero-thermal performance. A better understanding of the fundamental physical mechanisms arising from the interaction between the roughness and the turbine flow at engine-relevant conditions can provide insights for the design of blades with improved efficiency and longer operational life. To this end, a high-fidelity numerical framework combining a well-validated solver for direct numerical simulation and a second-order accurate immersed boundary method is employed to predict roughness-induced aero-thermal effects on an LS89 high-pressure turbine (HPT) blade at engine-relevant conditions. Different amplitudes and distributions of surface roughness are investigated and a reference smooth-blade simulation under the same flow conditions is conducted for comparison. Roughness of increasing amplitude progressively shifts the blade suction side boundary layer transition upstream, producing larger values of the turbulent kinetic energy and higher total wake losses. The on-surface data-capturing capabilities of the numerical framework provide direct measurements of the heat flux and the skin friction coefficient, hence offering quantitative information between the surface topology and engineering-relevant performance parameters. This work may provide a benchmark for future numerical studies of turbomachinery flows with roughness.

Engineering↗
DOE OSTI2020

Impact of Vibrational Nonequilibrium on the Supersonic Mode in Hypersonic Boundary Layers

The supersonic mode in hypersonic boundary layers has recently been shown to achieve a larger peak growth rate than the traditional second mode in particular circumstances relevant to free flight. In this environment, high levels of aerodynamic heating are encountered such that incorporation of chemical and vibrational nonequilibrium effects can become critical. The impact of thermal nonequilibrium (TNE) on the supersonic mode in particular has not been thoroughly and systematically investigated. This work uses thermochemical nonequilibrium (TCNE) direct numerical simulation (DNS) and TCNE linear stability theory (LST) to obtain a more complete investigation of the supersonic mode using both nonequilibrium and frozen gas models. The simulation is Mach 5 flow over a 1-mm-nose-radius axisymmetric cone 1 m in length, representative of experimental conditions in ground test facilities. Both LST and DNS results indicate that TNE effects are destabilizing compared with frozen flow and can lead to an N-factor difference of approximately +1 at the end of the cone. LST results also indicate that TNE effects are stabilizing to the second and supersonic modes in comparison with thermal equilibrium. The supersonic mode appeared to be slightly more affected by TNE than the second mode. In conclusion, collectively, the findings in this work suggest that even in ground test facilities where TCNE effects are relatively small compared with free flight, incorporating nonequilibrium models in both the mean flow and stability solvers can have a practical effect on hypersonic boundary-layer transition prediction analyses.

42 ENGINEERING↗
DOE OSTI2020

University of Kentucky measurements of wind, temperature, pressure and humidity in support of LAPSE-RATE using multisite fixed-wing and rotorcraft unmanned aerial systems

In July 2018, unmanned aerial systems (UASs) were deployed to measure the properties of the lower atmosphere within the San Luis Valley, an elevated valley in Colorado, USA, as part of the Lower Atmospheric Profiling Studies at Elevation – a Remotely-piloted Aircraft Team Experiment (LAPSE-RATE). Measurement objectives included detailing boundary layer transition, canyon cold-air drainage and convection initiation within the valley. Details of the contribution to LAPSE-RATE made by the University of Kentucky are provided here, which include measurements by seven different fixed-wing and rotorcraft UASs totaling over 178 flights with validated data. The data from these coordinated UAS flights consist of thermodynamic and kinematic variables (air temperature, humidity, pressure, wind speed and direction) and include vertical profiles up to 900 m above the ground level and horizontal transects up to 1500 m in length. These measurements have been quality controlled and are openly available in the Zenodo LAPSE-RATE community data repository (https://zenodo.org/communities/lapse-rate/, last access: 23 July 2020), with the University of Kentucky data available at https://doi.org/10.5281/zenodo.3701845 (Bailey et al., 2020).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

University of Nebraska unmanned aerial system (UAS) profiling during the LAPSE-RATE field campaign

Abstract. This paper describes the data collected by the University of Nebraska-Lincoln (UNL) as part of the field deployments during the Lower Atmospheric Process Studies at Elevation – a Remotely-piloted Aircraft Team Experiment (LAPSE-RATE) flight campaign in July 2018. The UNL deployed two multirotor unmanned aerial systems (UASs) at multiple sites in the San Luis Valley (Colorado, USA) for data collection to support three science missions: convection initiation, boundary layer transition, and cold air drainage flow. We conducted 172 flights resulting in over 21 h of cumulative flight time. Our novel design for the sensor housing onboard the UAS was employed in these flights to meet the aspiration and shielding requirements of the temperature and humidity sensors and to separate them from the mixed turbulent airflow from the propellers. Data presented in this paper include timestamped temperature and humidity data collected from the sensors, along with the three-dimensional position and velocity of the UAS. Data are quality-controlled and time-synchronized using a zero-order-hold interpolation without additional post-processing. The full dataset is also made available for download at https://doi.org/10.5281/zenodo.4306086 (Islam et al., 2020).

Islam, Ashraful (ORCID:000000022826269X)↗