Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boundary Layer Stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Variations in boundary layer stability across Antarctica: a comparison between coastal and interior sites

The range of boundary layer stability profiles, from the surface to 500 m a.g.l. (above ground level), present in radiosonde observations from two continental-interior (South Pole Station and Dome Concordia Station) and three coastal (McMurdo Station, Georg von Neumayer Station III, and Syowa Station) Antarctic sites, is examined using the self-organizing maps (SOMs) neural network algorithm. A wide range of potential temperature profiles is revealed, from shallow boundary layers with strong near-surface stability to deeper boundary layers with weaker or near-neutral stability, as well as profiles with weaker near-surface stability and enhanced stability aloft, above the boundary layer. Boundary layer regimes were defined based on the range of profiles revealed by the SOM analysis; 20 boundary layer regimes were identified to account for differences in stability near the surface as well as above the boundary layer. Strong, very strong, or extremely strong stability, with vertical potential temperature gradients of 5 to in excess of 30 K per 100 m, occurred more than 80 % of the time at South Pole and Dome Concordia in the winter. Weaker stability was found in the winter at the coastal sites, with moderate and strong stability (vertical potential temperature gradients of 1.75 to 15 K per 100 m) occurring 70 % to 85 % of the time. Even in the summer, moderate and strong stability is found across all five sites, either immediately near the surface or aloft, just above the boundary layer. While the mean boundary layer height at the continental-interior sites was found to be approximately 50 m, the mean boundary layer height at the coastal sites was deeper, around 110 m. Further, a commonly described two-stability-regime system in the Arctic associated with clear or cloudy conditions was applied to the 20 boundary layer regimes identified in this study to understand if the two-regime behavior is also observed in the Antarctic. It was found that moderate and strong stability occur more often with clear- than cloudy-sky conditions, but weaker stability regimes occur almost equally for clear and cloudy conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Cloud Properties and Boundary Layer Stability Above Southern Ocean Sea Ice and Coastal Antarctica

Significant variability in climate predictions originates from the simulated cloud cover over the Southern Ocean. Historically, Southern Ocean cloud and aerosol properties have been less studied than their northern hemisphere counterparts, and cloud-sea-ice interactions over the Southern Ocean also remain largely unexamined. We used data from combined radar, lidar, radiometer, radiosonde, and ERA5 reanalysis profiles to investigate cloud property relationships to cloud temperature, sea-ice concentration, and boundary layer stability. Our findings show correlations between both cloud macrophysical properties and radiative effects and sea-ice concentration, and that the marine atmospheric boundary layer is more stable over higher sea-ice concentrations. Mixed-phase cloud frequency of occurrence was highest over the sea-ice zone at 15%, three times higher than over cold water south of the Antarctic Polar Front. For temperatures greater than –15°C, low-level, single-layer clouds were more likely to precipitate ice if they were coupled to cold-water or sea-ice surfaces than if they were decoupled from these surfaces, with the highest percentage of clouds precipitating ice observed over sea ice. These findings suggest a surface source of ice-nucleating particles at high southern latitudes that increases cloud glaciation probability. We discuss the implications of our results for future studies into the relationship between cloud properties, aerosols, sea ice, and boundary layer stability at high latitudes over the Southern Ocean.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Assessing Physical Relationships Between Atmospheric State, Fluxes, and Boundary Layer Stability at McMurdo Station, Antarctica

Observations at McMurdo Station, Antarctica from 24 November 2015 through 3 January 2017 were used to characterize the physical relationships between boundary layer stability and atmospheric state and fluxes. The basis of this analysis was self-organizing maps (SOMs), a neural network algorithm, used to identify the range of potential temperature profiles present in the twice-daily radiosonde data during the ARM (Atmospheric Radiation Measurement) West Antarctic Radiation Experiment (AWARE) campaign. The SOM identified profiles ranging from strongly stable to weakly stable regimes over the lowest 500 m of the atmosphere. It was found that in the winter (MJJA), moderate and strongly stable regimes occur most frequently (61%), while weakly stable regimes dominate in the summer (DJ, 83.4%). The mechanisms responsible for the dominance of different stability regimes in each season were analyzed to determine why these regimes occur with varying frequency throughout the year. This analysis found that wind speed variations and radiative cooling are responsible for the stability observed in the winter, radiative warming, as well as weaker wind speeds, are responsible for summer weak stability, and stability variations in the transition seasons (FMA, SON) are characterized by a change in sign of net radiation with increasing stability, as wind speed changes little across stability regimes. Low-level jets were observed to occur about 50% of the time below areas of enhanced stability aloft and were observed most frequently in the transition seasons. The boundary layer depth, as determined by the Bulk Richardson number, was found to decrease with increasing stability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Thermodynamic and kinematic drivers of atmospheric boundary layer stability in the central Arctic during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC)

Observations collected during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) provide a detailed description of the impact of thermodynamic and kinematic forcings on atmospheric boundary layer (ABL) stability in the central Arctic. This study reveals that the Arctic ABL is stable and near-neutral with similar frequencies, and strong stability is the most persistent of all stability regimes. MOSAiC radiosonde observations, in conjunction with observations from additional measurement platforms, including a 10 m meteorological tower, ceilometer, microwave radiometer, and radiation station, provide insight into the relationships between atmospheric stability and various atmospheric thermodynamic and kinematic forcings of ABL turbulence and how these relationships differ by season. We found that stronger stability largely occurs in low-wind (i.e., wind speeds are slow), low-radiation (i.e., surface radiative fluxes are minimal) environments; a very shallow mixed ABL forms in low-wind, high-radiation environments; weak stability occurs in high-wind, moderate-radiation environments; and a near-neutral ABL forms in high-wind, high-radiation environments. Surface pressure (a proxy for synoptic staging) partially explains the observed wind speeds for different stability regimes. Cloud frequency and atmospheric moisture contribute to the observed surface radiation budget. Unique to summer, stronger stability may also form when moist air is advected from over the warmer open ocean to over the colder sea ice surface, which decouples the colder near-surface atmosphere from the advected layer, and is identifiable through observations of fog and atmospheric moisture.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Low-Reynolds-number oscillating boundary layers on adiabatic slopes

We investigate the instabilities and transition mechanisms of Boussinesq stratified boundary layers on sloping boundaries when subjected to oscillatory body forcing parallel to the slope. We examine idealized forms of boundary layers on hydraulically smooth abyssal slopes in tranquil mid- to low-latitude regions, where low-wavenumber internal tides gently heave isopycnals up and down adiabatic slopes in the absence of mean flows, high-wavenumber internal tides, shelf breaks, resonant tide–bathymetry interactions (critical slopes) and other phenomena associated with turbulence ‘hot spots’. In non-rotating low-Reynolds-number flow, increased stratification on the downslope phase has a relaminarizing effect, while on the upslope phase we find transition-to-turbulence pathways arise from shear production triggered by gravitational instabilities. When rotation is significant (low slope Burger numbers) we find that boundary layer turbulence is sustained throughout the oscillation period, resembling stratified Stokes–Ekman layer turbulence. Simulation results suggest that oscillating boundary layers on smooth slopes at low Reynolds number ($Re\leqslant 840$), unity Prandtl number and slope Burger numbers greater than unity do not cause significant irreversible turbulent buoyancy flux (mixing), and that flat-bottom dissipation rate models derived from the tide amplitude are accurate within an order of magnitude.

42 ENGINEERING↗
DOE OSTI2020

Modeling Arctic boundary layer cloud streets at grey-zone resolutions

To better understand how model resolution affects the formation of Arctic boundary layer clouds, we investigated the influence of grid spacing on simulating cloud streets that occurred near Utqiagvik (formerly Barrow), Alaska on 2 May 2013 and were observed by the Moderate Resolution Imaging Spectroradiometer (MODIS). The Weather Research and Forecasting model was used to simulate the clouds using nested domains with increasingly fine resolution ranging from a horizontal grid spacing of 27 km in the boundary-layer-parameterized mesoscale domain to a grid spacing of 0.111 km in the large-eddy-permitting domain. We investigated the model-simulated mesoscale environment, horizontal and vertical cloud structures, boundary layer stability, and cloud properties, all of which were subsequently used to interpret the observed roll-cloud case. Increasing model resolution led to a transition from a more buoyant boundary layer to a more shear-driven turbulent boundary layer. The clouds were stratiform-like in the mesoscale domain, but as the model resolution increased, roll-like structures, aligned along the wind field, appeared with ever smaller wavelengths. A stronger vertical water vapor gradient occurred above the cloud layers with decreasing grid spacing. With fixed model grid spacing at 0.333 km, changing the model configuration from a boundary layer parameterization to a large-eddy-permitting scheme produced a more shear-driven and less unstable environment, a stronger vertical water vapor gradient below the cloud layers, and the wavelengths of the rolls decreased slightly. In this study, only the large-eddy-permitting simulation with gird spacing of 0.111 km was sufficient to model the observed roll clouds.

Lai, Hui-Wen↗
DOE OSTI2020

Relationships Between Precipitation Properties and Large-Scale Conditions During Subsidence at the Eastern North Atlantic Observatory

Three years of reanalysis and ground-based observations collected at the Eastern North Atlantic (ENA) observatory are analyzed to document the properties of rain and boundary layer clouds, and their relationship with the large-scale environment during general subsidence conditions and following cold front passages. Clouds in the wake of cold fronts exhibit on average a 10% higher propensity to precipitate and higher rain-to-cloud fraction than cloud found in general subsidence conditions. Similarities in the seasonal cycle of rain and of large-scale properties suggest that the large-scale conditions created by the cold front passage are responsible for the unique properties of the rain forming in its wake. The identification of monotonic relationships between rain-to-cloud fraction and rain rate with surface forcing and boundary layer stability parameters as well as between virga base height with stability and humidity measures further supports that large-scale conditions impact precipitation variability. Likewise, these relationships between the large-scale and rain properties are less clear than those established between cloud and rain properties suggesting that cloud macrophysics have a more direct impact on the properties of rain than the large-scale environment. The applicability of previously documented relationships between rain properties and cloud thickness is tested and the relationships adjusted to accommodate the complex shallow clouds and melting precipitation observed to occur in the ENA region. Furthermore, establishing these relationships opens up opportunities for parametrization development and suggest that a realistic representation of precipitation properties in models relies on the accurate representation of both clouds and the large-scale environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Upper Troposphere Smoke Injection From Large Areal Fires

Abstract Large areal fires, such as those ignited following a nuclear detonation, can inject smoke into the upper troposphere and lower stratosphere. Detailed fire simulations allow for assessment of how local weather interacts with these fires and affects smoke lofting. In this study, we employ the fire simulation package in the Weather Research and Forecasting (WRF‐Fire) model, Version 4.0.1, to explore how smoke lofting from a fire burning a homogeneous fuel bed changes with varying local winds, relative humidity, and atmospheric boundary‐layer stability for two different‐sized areal fires. The presence of moisture has the greatest influence on the results by raising the altitude of lofting, while faster wind speeds dampen lofting and lower the injection height. Stably stratified conditions inhibit plume propagation compared with neutrally stratified conditions, although the impact of stability is not as strong as that of moisture and winds. These findings highlight the importance of using an appropriate atmospheric profile when simulating large fires, as the local weather can have a meaningful influence on smoke lofting.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Measurement and Analysis of the Microphysical Properties of Arctic Precipitation Showing Frequent Occurrence of Riming

Detailed ground-based observations of snow are scarce in remote regions, such as the Arctic. Here, Multi-Angle Snowflake Camera measurements of over 55,000 solid hydrometeors—obtained during a two-year period from August 2016 to August 2018 at Oliktok Point, Alaska—are analyzed and compared to similar measurements from an earlier experiment at Alta, Utah. In general, distributions of hydrometeor fall speed, fall orientation, aspect ratio, flatness, and complexity (i.e., riming degree) were observed to be very similar between the two locations, except that Arctic hydrometeors tended to be smaller. In total, the slope parameter defining a negative exponential of the size distribution was approximately 50% steeper in the Arctic as at Alta. Sixty-six percent of particles were observed to be rimed or moderately rimed with some suggestion that riming is favored by weak boundary layer stability. On average, the fall speed of rimed particles was not notably different from aggregates. However, graupel density and fall speed increase as cloud temperatures approach the melting point.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Dry Deposition Methods Based on Turbulence Kinetic Energy: 1. Evaluation of Various Resistances and Sensitivity Studies Using a Single‐Point Model

Different functions are used to account for turbulence strength in the atmospheric boundary layer for different stability regimes. These functions are one of the sources for differences among different atmospheric models' predictions and associated biases. Also, turbulence strength is underrepresented in some of the resistance formulations. Here, to address these issues with dry deposition, firstly we take advantage of three‐dimensional (3‐D) turbulence information in estimating resistances by proposing and validating a 3‐D turbulence velocity scale that is relevant for different stability regimes of boundary layer. Secondly, we hypothesize and validate that friction velocity measured by 3‐D sonic anemometer can be effectively replaced by the new turbulence velocity scale multiplied by the von Karman constant. Finally, we (a) present a set of resistance formulations for ozone (O 3 ) based on the 3‐D turbulence velocity scale; (b) intercompare estimations of such resistances with those obtained using existing formulations; and, (c) evaluate simulated O 3 fluxes using a single‐point dry deposition model against long‐term observations of O 3 fluxes at the Harvard Forest (MA) site. Results indicate that the new resistance formulations work very well in simulating surface latent heat and O 3 fluxes when compared to respective existing formulations and measurements at a decadal time scale. Findings from this research may help to improve the capability of dry deposition schemes for better estimation of dry deposition fluxes and create opportunities for the development of a community dry deposition model for use in regional/global air quality models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Floquet stability analyses of stratified oscillating boundary layers on adiabatic slopes

The presence of a no-slip, impermeable, adiabatic, sloped boundary in an otherwise quiescent, stably stratified, Boussinesq flow generates baroclinic vorticity within a diffusive boundary layer. Such conditions are typical of the oscillating boundary layers on adiabatic abyssal slopes, sloped lake bathymetry and sloped coastal bathymetry in the absence of high-wavenumber internal waves, mean flows, far-field turbulence on larger scales, and resonant tidal–bathymetric interaction. We investigate the linear stability of the oscillating flow within non-dimensional parameter space typical of the $M_2$ tide and hydraulically smooth, middle-latitude abyssal slopes through Floquet linear stability analysis. The flow dynamics depends on three non-dimensional variables: the Reynolds number for Stokes’ second problem, the Prandtl number, and a frequency ratio that accounts for the resonance conditions ($C$, criticality) of the buoyant restoring force and the tidal forcing. The Floquet analysis results suggest that oscillating laminar boundary layers on adiabatic abyssal slopes are increasingly unstable as Reynolds number, criticality parameter and/or spanwise disturbance wavenumber are increased. We also show that the two-dimensional Floquet linear instability necessarily generates three-dimensional baroclinic vorticity, which suggests that the evolution of the gravitational instabilities may be nonlinear as $t→∞$.

42 ENGINEERING↗
DOE OSTI2020

The mechanisms and seasonal differences of the impact of aerosols on daytime surface urban heat island effect

The urban heat island intensity (UHII) is the temperature difference between urban areas and their rural surroundings. It is commonly attributed to changes in the underlying surface structure caused by urbanization. Air pollution caused by aerosol particles can affect the UHII through changing (1) the surface energy balance by the aerosol radiative effect (ARE) and (2) planetary-boundary-layer (PBL) stability and airflow intensity by modifying thermodynamic structure, which is referred to as the aerosol dynamic effect (ADE). By analyzing satellite data and ground-based observations collected from 2001 to 2010 at 35 cities in China and using the WRF-Chem model, we find that the impact of aerosols on UHII differs considerably: reducing the UHII in summer but increasing the UHII in winter. This seasonal contrast is proposed to be caused by the different strengths of the ARE and ADE between summer and winter. In summer, the ARE on UHII is dominant over the ADE, cooling down surface temperature more strongly in urban areas than in rural areas because of much higher aerosol loading, and offsets the urban heating, therefore weakening UHII. In winter, however, the ADE is more dominant, because aerosols stabilize the PBL more in the polluted condition, weakening the near-surface heat transport over urban areas in both vertical and horizontal directions. This means that the heat accumulated in urban areas is dispersed less effectively, and thus the UHII is enhanced. These findings shed new light on the impact of the interaction between urbanization-induced surface changes and air pollution on urban climate.urban areas and their rural surroundings. It is commonly attributed to changes in the underlying surface structure caused by urbanization. Air pollution caused by aerosol particles can affect the UHII through changing (1) the surface energy balance by the aerosol radiative effect (ARE) and (2) planetary-boundary-layer (PBL) stability and airflow intensity by modifying thermodynamic structure, which is referred to as the aerosol dynamic effect (ADE). By analyzing satellite data and ground-based observations collected from 2001 to 2010 at 35 cities in China and using the WRF-Chem model, we find that the impact of aerosols on UHII differs considerably: reducing the UHII in summer but increasing the UHII in winter. This seasonal contrast is proposed to be caused by the different strengths of the ARE and ADE between summer and winter. In summer, the ARE on UHII is dominant over the ADE, cooling down surface temperature more strongly in urban areas than in rural areas because of much higher aerosol loading, and offsets the urban heating, therefore weakening UHII. In winter, however, the ADE is more dominant, because aerosols stabilize the PBL more in the polluted condition, weakening the near-surface heat transport over urban areas in both vertical and horizontal directions. This means that the heat accumulated in urban areas is dispersed less effectively, and thus the UHII is enhanced. These findings shed new light on the impact of the interaction between urbanization-induced surface changes and air pollution on urban climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Simulated meteorological impacts of offshore wind turbines and sensitivity to the amount of added turbulence kinetic energy

Offshore wind energy projects are currently in development off the east coast of the United States and may influence the local meteorology of the region. Wind power production and other commercial uses in this area are related to atmospheric conditions, and so it is important to understand how future wind plants may change the local meteorology. In the absence of measurements of potential wind plant impacts on meteorology, simulations offer the next-best possible insight into wake effects on boundary layer height, temperature, fluxes, and wind speeds. However, simulation tools that capture these effects offer multiple options for representing the amount of turbine-added turbulence that may impact assessments of micrometeorological effects. To explore this sensitivity, we compare 1 year of simulations from the Weather Research and Forecasting (WRF) model with and without wind plants incorporated, focusing on the lease area south of Massachusetts and Rhode Island. The simulations with wind plants are repeated to include both the maximum and minimum amounts of added turbulence to provide bounds on the potential impacts. We assess changes in wind speeds, 2 m temperature, surface heat flux, turbulence kinetic energy (TKE), and boundary layer height during different stability classifications and ambient wind speeds over the entire year and compare results for the degree of added turbulence in the wind plant simulations. Because the wake behavior may be a function of boundary layer stability, in this paper, we also present a machine learning algorithm to quantify the area and distance of the wake generated by the wind plant. This analysis enables us to identify the relationship between wake extent and boundary layer height. We find that hub-height wind speed is reduced within and downwind of the wind plant, with the strongest impacts occurring during stable conditions and faster wind speeds in region 3 of the turbine power curve, although impacts lessen as wind speeds increase past 15 m s−1. In contrast, wind speeds near the surface decrease when no turbine-added turbulence is included but can increase for stably stratified conditions when 100 % of possible TKE is included in the simulations. TKE increases at hub height in the simulations with added TKE for all stability classes, suggesting that atmospheric stability does not immediately modify the TKE generated by turbines. Negligible changes in hub-height TKE manifest in the simulations without the added TKE. At the surface, TKE increases in the simulations with maximum added turbulence only for unstable conditions. In the no-added-turbulence simulations, surface TKE decreases slightly in neutral and unstable simulations. Differences in 2 m temperatures and surface heat fluxes are small but vary considerably with atmospheric stability and the amount of added TKE. Boundary layer heights increase within the wind plant when turbine-added turbulence is included and decrease slightly downwind during stable conditions. In contrast, with no added turbulence, the boundary layer height is in general reduced in stable conditions with wind speeds less than 15 m s −1 and slightly increased in neutral conditions. Finally, shallower upwind boundary layer heights tend to correlate with larger wake areas and distances, though other factors likely also play a role in determining the extent of the wind plant wake. These simulation-based results provide a bound for micrometeorological impacts of wind plant wakes: simulations that couple the atmosphere to the ocean may reduce these impacts, and we await observational verification.

17 WIND ENERGY↗
DOE OSTI2022

The Dependence of Mean Climate State on Shortwave Absorption by Water Vapor

Abstract State-of-the-art climate models exhibit significant spread in the climatological value of atmospheric shortwave absorption (SWA). This study investigates both the possible causes and climatic impacts of this SWA intermodel spread. The intermodel spread of global-mean SWA largely originates from the intermodel difference in water vapor shortwave absorptivity. Hence, we alter the water vapor shortwave absorptivity in the Community Earth System Model, version 1, with the Community Atmosphere Model, version 4 (CESM1-CAM4). Increasing the water vapor shortwave absorptivity leads to a reduction in global-mean precipitation and a La Niña–like cooling over the tropical Pacific. The global-mean atmospheric energy budget suggests that the precipitation is suppressed as a way to compensate for the increased SWA. The precipitation reduction is driven by the weakened surface winds, stabilized planetary boundary layer, and surface cooling. The La Niña–like cooling over the tropical Pacific is attributed to the zonal asymmetry of climatological evaporative damping efficiency and the low cloud enhancement over the eastern basin. Complementary fixed SSTs simulations suggest that the latter is more fundamental and that it primarily arises from atmospheric processes. Consistent with our experiments, the CMIP5/6 models with a higher global-mean SWA tend to produce tropical Pacific toward a more La Niña–like mean state, highlighting the possible role of water vapor shortwave absorptivity for shaping the mean-state climate patterns.

Kim, Hanjun↗
DOE OSTI2025

Savannah River Site Climatology for Research Activities Conducted Onsite and in P-Area (1994-2023)

This report presents a climatology of meteorological variables at the Savannah River Site (SRS) using measurements from the P-Area and Central Climatology meteorological towers to support research activities at the Savannah River Site. Key values included in this report are wind, surface pressure, temperature, relative humidity, soil moisture, cloud fraction, cloud base, lightning, atmospheric stability, and boundary layer parameters. The Central Climatology tower is useful in that it is instrumented at four levels, allowing for an examination of height dependence on some variables.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Savannah River Site Climatology for Research Activities Conducted Onsite and in P-Area (1994-2023)

Executive Summary This report presents a climatology of meteorological variables at the Savannah River Site (SRS) using measurements from the P-Area and Central Climatology meteorological towers to support research activities at the Savannah River Site. Key values included in this report are wind, surface pressure, temperature, relative humidity, soil moisture, cloud fraction, cloud base, lightning, atmospheric stability, and boundary layer parameters. The Central Climatology tower is useful in that it is instrumented at four levels, allowing for an examination of height dependence on some variables.

54 ENVIRONMENTAL SCIENCES↗