Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Convert Graphene Sheets to Boron Nitride and Boron Nitride-carbon Sheets via a Carbon-substitution Reaction

Here we discuss our synthesis of highly crystalline pure boron nitride (BN) and BN-carbon (BN-C) sheets by using graphene sheets as templates via a carbon-substitution reaction. Typically, these sheets are several micrometers wide and have a few layers. The composition ratios of BN-C sheets can be controlled by the post-treatment (remove carbon by oxidation) temperature. We also observed pure BN and BN-C nanoribbons. We characterized the BN-C sheets via Raman spectroscopy and density functional theory calculations. The results reveal that BN-C sheets with an armchair C-BN chain, and embedded C2 or C6 units in BN-dominated regions energetically are the most favorable.

36 MATERIALS SCIENCE↗

The role of boron segregation in enhanced thermoelectric power factor of CoSi{sub 1-x}B{sub x} alloys

We report on the influence of boron segregation on the thermoelectric properties of CoSi. Contrary to previous suggestions, and in stark contrast to aluminum substitution, boron does not enter the lattice on the Si site, but rather segregates to the grain boundaries in these alloys. Through a combination of x-ray diffraction, scanning electron microscope, and scanning Auger techniques, we present clear evidence of the formation of a CoB phase at the grain boundaries. Consistent with the failure of B to substitute for Si, we observe no changes in the electron concentration or the Seebeck coefficient under boron substitution. The electrical resistivity, on the other hand, displays a non-monotonic behavior with increasing boron concentration, first decreasing for small amounts of boron, before increasing at higher levels of substitution. We attribute this behavior to a combination of an initial healing effect of boron on microcracks, followed by the eventual increase in electron scattering by the secondary CoB phase at higher concentrations.

36 MATERIALS SCIENCE↗

Coated boron layers by boronization and a real-time boron coating using impurity powder dropper in LHD

In Large Helical Device (LHD), diborane (B 2 H 6 ) is used as a standard boron source for boronization, which is assisted by helium glow discharges. In 2019, a new Impurity Powder Dropper (IPD) system has been installed and is under evaluation as a real-time wall conditioning technique. In LHD), which is a large size heliotron device, an additional helium (He) glow discharge cleaning (GDC) after boronization has been operated for a reduction of hydrogen recycling from coated boron layers, and this operational time of 3 h was determined by spectroscopic data during glow discharges. A flat hydrogen profile is obtained on the top surface of coated boron on the specimen exposed to boronization, the result suggests a reduction of hydrogen at the top surface by He-GDC. Trapped oxygen in coated boron was obtained by boronization, and the coated boron, which has boron-oxide, on the first wall by B-IPD was also shown. Finally, considering the difference in coating areas between B 2 H 6 boronization and B-IPD operation, it would be most effective to use the IPD and B 2 H 6 boronization coating together for optimized wall conditioning.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

β-Rhombohedral Boron: At the Crossroads of the Chemistry of Boron and the Physics of Frustration [Boron: a frustrated element]

In the periodic table boron occupies a peculiar, crossover position: on the first row, it is surrounded by metal forming elements on the left and by non-metals on the right. In addition, it is the only non-metal of the third column. Therefore it is perhaps not surprising that the crystallographic structure and topology of its stable allotrope at room temperature (β-boron) are not shared by any other element, and are extremely complex. The formidable intricacy of β- boron, with interconnecting icosahedra, partially occupied sites, and an unusually large number of atoms per unit cell (more than 300) has been known for more than 40 years. Nevertheless boron remains the only element purified in significant quantities whose ground state geometry has not been completely determined by experiments. However theoretical progress reported in the last decade has shed light on numerous properties of elemental boron, leading to a thorough characterization of its structure at ambient conditions, as well as of its electronic and thermodynamic properties. This review discusses in detail the properties of β-boron, as inferred from experiments and the ab-initio theories developed in the last decade.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Periodic Mesoporous Hexagonal Boron Nitride at High Pressure: A Route to Cubic Boron Nitride Nanocrystals and Mesoporous Cubic Boron Nitride

Periodic mesoporous hexagonal boron nitride was investigated as a precursor for nanoscale forms of cubic boron nitride. Cubic boron nitride (c-BN) nanocrystals were obtained at a pressure of 14 GPa and a temperature of 13008C. The synthesized nanocrystals have diameters of ~ 50 nm and are solution processible. Mesoporous c-BN formed at a pressure of 10 GPa and 1000 8C. The mesoporous c-BN has a pore size distribution centered around 3 nm and a surface area of 122 m2/g as determined by electron tomography. At pressures of 8 and 6 GPa near monodisperse h-BN nanodiscs with diameters of 0.5-1 mm and 0.2-0.5 mm were formed, respectively. The discs formed colloidal solutions in acetone. The hydrodynamic radius of the discs matched the radii determined by dynamic light scattering indicating absence of nanodisc aggregation in solution.

Mandal, Manik↗

Application of a new composite cubic-boron nitride gasket assembly for high pressure inelastic x-ray scattering studies of carbon related materials

We have developed a new composite cubic-boron nitride (c-BN) gasket assembly for high pressure diamond anvil cell studies, and applied it to inelastic x-ray scattering (IXS) studies of carbon related materials in order to maintain a larger sample thickness and avoid the interference from the diamond anvils. The gap size between the two diamond anvils remained {approx}80 {micro}m at 48.0 GPa with this new composite c-BN gasket assembly. The sample can be located at the center of the gap, {approx}20 {micro}m away from the surface of both diamond anvils, which provides ample distance to separate the sample signal from the diamond anvils. The high pressure IXS of a solvated C{sub 60} sample was studied up to 48 GPa, and a pressure induced bonding transition from sp{sup 2} to sp{sup 3} was observed at 27 GPa.

36 MATERIALS SCIENCE↗

Thickness determination of few-layer hexagonal boron nitride films by scanning electron microscopy and Auger electron spectroscopy

We assess scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) for thickness measurements on few-layer hexagonal boron nitride (h-BN), the layered dielectric of choice for integration with graphene and other two-dimensional materials. Observations on h-BN islands with large, atomically flat terraces show that the secondary electron intensity in SEM reflects monolayer height changes in films up to least 10 atomic layers thickness. From a quantitative analysis of AES data, the energy-dependent electron escape depth in h-BN films is deduced. The results show that AES is suitable for absolute thickness measurements of few-layer h-BN of 1 to 6 layers.

36 MATERIALS SCIENCE↗

Oxidative Deboronation of Boronic Acids by Hydrogen Peroxide in Planta Generates Borate for Cross-Linking of Rhamnogalacturonan II

Vascular plants require boron to cross-link the rhamnogalacturonan-II (RG-II) domain of pectin to form functional cell walls. Boronic acids, which form reversible esters with cis-diols like borate, have been proposed to influence RG-II cross-linking, though the mechanism remains unclear. We used suspension-cultured rose cells adapted to grow without boron to investigate the effect of boronic acids on RG-II dimerization. When grown with phenylboronic acid (PBA) as the sole boron source, nearly all RG-II was crosslinked, whereas methylboronic acid (MBA) only partially restored cross-linking. In contrast, in vitro assays showed that homogeneous RG-II monomers did not dimerize with alkyl or aryl boronic acids unless supplemented with hydrogen peroxide (H2O2), which oxidatively converts boronic acids to boric acid. Real-time NMR spectroscopy and density functional theory calculations provided insight into the reaction mechanism and energetics of oxidation respectively. Together, our data show that exogenous boronic acids are a source of boric acid for plants, and that the deboronation reaction generates aryl or alkyl alcohol byproducts that can undergo further chemical modification in planta. The fate and potential roles of these byproducts in planta remain to be determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elastic properties, sp³ fraction, and Raman scattering in low and high pressure synthesized diamond-like boron rich carbides

Dense BC{sub x} phases with high boron concentration are predicted to be metastable, superhard, and conductors or superconductors depending on boron concentration. However, up to this point, diamond-like boron rich carbides BC{sub x} (dl-BC{sub x}) phases have been thought obtainable only through high pressure and high temperature treatment, necessitating small specimen volume. Here, we use electron energy loss spectroscopy combined with transmission electron microscopy, Raman spectroscopy, surface Brillouin scattering, laser ultrasonics (LU) technique, and analysis of elastic properties to demonstrate that low pressure synthesis (chemical vapor deposition) of BC{sub x} phases may also lead to the creation of diamond-like boron rich carbides. The elastic properties of the dl-BC{sub x} phases depend on the carbon sp²versus sp³ content, which decreases with increasing boron concentration, while the boron bonds determine the shape of the Raman spectra of the dl-BC{sub x} after high pressure-high temperature treatment. Using the estimation of the density value based on the sp³ fraction, the shear modulus μ of dl-BC₄, containing 10% carbon atoms with sp³ bonds, and dl-B₃C₂, containing 38% carbon atoms with sp³ bonds, were found to be μ = 19.3 GPa and μ = 170 GPa, respectively. The presented experimental data also imply that boron atoms lead to a creation of sp³ bonds during the deposition processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electroextraction of boron from boron carbide scrap

Studies were carried out to extract elemental boron from boron carbide scrap. The physicochemical nature of boron obtained through this process was examined by characterizing its chemical purity, specific surface area, size distribution of particles and X-ray crystallite size. The microstructural characteristics of the extracted boron powder were analyzed by using scanning electron microscopy and transmission electron microscopy. Raman spectroscopic examination of boron powder was also carried out to determine its crystalline form. Oxygen and carbon were found to be the major impurities in boron. Boron powder of purity ∼ 92 wt. % could be produced by the electroextraction process developed in this study. Optimized method could be used for the recovery of enriched boron ({sup 10}B > 20 at. %) from boron carbide scrap generated during the production of boron carbide. - Highlights: • Recovery of {sup 10}B from nuclear grade boron carbide scrap • Development of process flow sheet • Physicochemical characterization of electroextracted boron • Microscopic examination of electroextracted boron.

36 MATERIALS SCIENCE↗

Characterization of Boron Contamination in Fluorine Implantation using Boron Trifluoride as a Source Material

Fluorine implantation process purity was considered on different types of high current implanters. It was found that implanters equipped with an indirectly heated cathode ion source show an enhanced deep boron contamination compared to a high current implanter using a cold RF-driven multicusp ion source when boron trifluoride is used for fluorine implantations. This contamination is directly related to the source technology and thus, should be considered potentially for any implanter design using hot cathode/hot filament ion source, independently of the manufacturer.The boron contamination results from the generation of double charged boron ions in the arc chamber and the subsequent charge exchange reaction to single charged boron ions taking place between the arc chamber and the extraction electrode. The generation of the double charged boron ions depends mostly on the source parameters, whereas the pressure in the region between the arc chamber and the extraction electrode is mostly responsible for the charge exchange from double charged to single charged ions. The apparent mass covers a wide range, starting at mass 11. A portion of boron ions with energies of (19/11) times higher than fluorine energy has the same magnetic rigidity as fluorine beam and cannot be separated by the analyzer magnet. The earlier described charge exchange effects between the extraction electrode and the entrance to the analyzer magnet, however, generates boron beam with a higher magnetic rigidity compared to fluorine beam and cannot cause boron contamination after mass-separation.The energetic boron contamination was studied as a function of the ion source parameters, such as gas flow, arc voltage, and source magnet settings, as well as analyzing magnet aperture resolution. This allows process optimization reducing boron contamination to the level acceptable for device performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of boron oxide potentials for computer simulations of multicomponent oxide glasses

Molecular dynamics and related atomistic computer simulations are effective ways in studying the structures and structure–property relations of glass materials. However, simulations of boron oxide (B 2 O 3 )-containing oxide glasses pose a challenge due to the lack of reliable empirical potentials. This paper reports development of a set of partial charge pairwise composition-dependent potentials for boron-related interactions that enable simulations of multicomponent borosilicate glasses, together with some of the existing parameters. This set of potentials was tested in sodium borate glasses and sodium borosilicate glasses and it is shown capable to describe boron coordination change with glass composition in wide composition ranges. Structure features such as boron N 4 value, density, Q n species distribution, fraction of non-bridging oxygen around boron and silicon, total correlation function, and bond angle distribution function were calculated and compared with available experimental data. Mechanical properties of the simulated glasses calculated with the new potential also show good agreement with experiments. Therefore, this new set of potential can be used to simulate boron oxide-containing multicomponent glasses including those with wide industrial and technology applications.

nuclear, defects, corrosion↗

Synthesis of borophenes: Anisotropic, two-dimensional boron polymorphs

Borophene: Boron in two dimensions Although bulk allotropes of carbon and boron differ greatly, small clusters of these elements show remarkable similarities. Boron analogs of two-dimensional carbon allotropes such as graphene have been predicted. Now Mannix et al. report the formation of two-dimensional boron by depositing the elemental boron onto a silver surface under ultrahigh-vacuum conditions (see the Perspective by Sachdev). The graphene-like structure was buckled, weakly bonded to the substrate, and metallic. Science , this issue p. 1513 ; see also p. 1468

Mannix, Andrew J.↗