Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bethe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Exploring the impact of ions on oxygen K-edge X-ray absorption spectroscopy in NaCl solution using the GW-Bethe-Salpeter-equation approach

X-ray absorption spectroscopy (XAS) is a powerful experimental tool to probe the local structure in materials with the core hole excitations. Here, the oxygen K-edge XAS spectra of the NaCl solution and pure water are computed by using a recently developed GW-Bethe-Salpeter equation approach, based on configurations modeled by path-integral molecular dynamics with the deep-learning technique. The neural network is trained on ab initio data obtained with strongly constrained and appropriately normed density functional theory. The observed changes in the XAS features of the NaCl solution, compared to those of pure water, are in good agreement between experimental and theoretical results. We provided detailed explanations for these spectral changes that occur when NaCl is solvated in pure water. Specifically, the presence of solvating ion pairs leads to localization of electron-hole excitons. As a result, our theoretical XAS results support the theory that the effects of the solvating ions on the H-bond network are mainly confined within the first hydration shell of ions, however beyond the shell the arrangement of water molecules remains to be comparable to that observed in pure water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Confinement of many-body Bethe strings

Based on the Bethe ansatz approach and inelastic neutron scattering experiments, we reveal the evolution of confinement of many-body Bethe strings in ordered regions of the quasi-one-dimensional antiferromagnet YbAlO 3 . In the antiferromagnetic phase, the spin dynamics is dominated by confined length-1 Bethe strings, whose dominancy in the high-energy branch of the excitation spectrum yields to confined length-2 Bethe strings when the material is tuned to the spin-density-wave phase. In the thermal-induced disordered region, the confinement effect disappears, and the system restores the conventional quantum integrable physics of the one-dimensional Heisenberg model. Finally, our results establish a unified picture based on a Bethe string for the spin dynamics in different magnetic phases of YbAlO 3 , and thus provide profound insight into many-body quantum magnetism.

1-dimensional spin chains↗
DOE OSTI2024

Direct solution of Minkowski-space Bethe-Salpeter equation in the massive Wick-Cutkosky model

Here in order to solve the Bethe-Salpeter equation (BSE) in the Minkowski space, we first introduce the Nakanishi integral representations of the Bethe-Salpeter amplitude and the Bethe-Salpeter wave function. We then derive the explicit integral equations for the corresponding spectral functions from the BSE for states of two scalar particles bound by a scalar-particle exchange interaction, where the propagators of constituents are allowed to be fully dressed. These integral equations are subsequently solved numerically in the variation of the Wick-Cutkosky model with massive exchange particles, where an algorithm of adaptive mash grid is proposed. The equations and algorithm we develop here serve as the foundation of Minkowski-space formulation of BSE for bound states of fermions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Phase transitions in Schloegl's second model for autocatalysis on a Bethe lattice

Schloegl's second model (also known as the quadratic contact process) on a lattice involves spontaneous particle annihilation at rate p and autocatalytic particle creation at empty sites with n ≥ 2 occupied neighbors. The particle creation rate for exactly n occupied neighbors is selected here as n(n - 1)/[z(z - 1)] for lattice coordination number z. We analyze this model on a Bethe lattice. Precise behavior for stochastic models on regular periodic infinite lattices is usually surmised from kinetic Monte Carlo simulation on a finite lattice with periodic boundary conditions. However, the persistence of boundary effects for a Bethe lattice complicates this process, e.g., by inducing spatially heterogenous states. This motivates the exploration of various boundary conditions and unconventional simulation ensembles on the Bethe lattice to predict behavior for infinite size. Here, we focus on z = 3, and predict a discontinuous transition to the vacuum state on the infinite lattice when p exceeds a threshold value of around 0.053.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Three-point functions in $\mathrm{ABJM}$ and Bethe Ansatz

We develop an integrability-based framework to compute structure constants of two sub-determinant operators and a single-trace non-BPS operator in ABJM theory in the planar limit. In this first paper, we study them at weak coupling using a relation to an integrable spin chain. We first develop a nested Bethe ansatz for an alternating SU(4) spin chain that describes single-trace operators made out of scalar fields. We then apply it to the computation of the structure constants and show that they are given by overlaps between a Bethe eigenstate and a matrix product state. We conjecture that the determinant operator corresponds to an integrable matrix product state and present a closed-form expression for the overlap, which resembles the so-called Gaudin determinant. We also provide evidence for the integrability of general sub-determinant operators. The techniques developed in this paper can be applied to other quantities in ABJM theory including three-point functions of single-trace operators.

1/N Expansion↗
DOE OSTI2022

Algebraic Bethe Circuits

The Algebraic Bethe Ansatz (ABA) is a highly successful analytical method used to exactly solve several physical models in both statistical mechanics and condensed-matter physics. Here we bring the ABA into unitary form, for its direct implementation on a quantum computer. This is achieved by distilling the non-unitary R matrices that make up the ABA into unitaries using the QR decomposition. Our algorithm is deterministic and works for both real and complex roots of the Bethe equations. We illustrate our method on the spin-$\frac{1}{2}$ XX and XXZ models. We show that using this approach one can efficiently prepare eigenstates of the XX model on a quantum computer with quantum resources that match previous state-of-the-art approaches. We run small-scale error mitigated implementations on the IBM quantum computers, including the preparation of the ground state for the XX and XXZ models on 4 sites. Finally, we derive a new form of the Yang-Baxter equation using unitary matrices, and also verify it on a quantum computer.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2018

An Overview of Methods for Deriving the Radiative Transfer Theory from the Maxwell Equations. II: Approach Based on the Dyson and Bethe-Salpeter Equations

In this paper, the vector radiative transfer equation is derived by means of the vector integral Foldy equations describing the electromagnetic scattering by a group of particles. By assuming that in a discrete random medium the positions of the particles are statistically independent and by applying the Twersky approximation to the order-of-scattering expansion of the total field, we derive the Dyson equation for the coherent field and the ladder approximated Bethe–Salpeter equation for the dyadic correlation function. Then, under the far-field assumption for sparsely distributed particles, the Dyson equation is reduced to the Foldy integral equation for the coherent field, while the iterated solution of the Bethe–Salpeter equation ultimately yields the vector radiative transfer equation.

Electromagnetic scattering↗
DOE OSTI2025

Five-body systems with Bethe-Salpeter equations

We extend the Bethe-Salpeter formalism to systems made of five valence particles. Restricting ourselves to two-body interactions, we derive the subtraction terms necessary to prevent overcounting. We solve the five-body Bethe-Salpeter equation numerically for a system of five scalar particles interacting by a scalar exchange boson. To make the calculations tractable, we implement properties of the permutation group S 5 and construct an approximation based on intermediate two- and three-body poles. We extract the five-body ground and excited states along with the spectra obtained from the two-, three-, and four-body equations. In the limit of a massless exchange particle, the two-, three, four- and five-body states coexist within a certain range of the coupling strength, whereas for heavier exchange particles the five-body system becomes Borromean. Our study serves as a building block for the calculation of pentaquark properties using functional methods.

Eichmann, Gernot [Univ. of Graz (Austria)] (ORCID:↗
DOE OSTI2024

Computation of the expectation value of the spin operator S^ 2 for the spin-flip Bethe–Salpeter equation

Spin-flip (SF) methods applied to excited-state approaches like the Bethe–Salpeter equation allow access to the excitation energies of open-shell systems, such as molecules and defects in solids. The eigenstates of these solutions, however, are generally not eigenstates of the spin operator S^ 2 . Even for simple cases where the excitation vector is expected to be, for example, a triplet state, the value of S^ 2 may be found to differ from 2.00; this difference is called 'spin contamination'. The expectation values S^ 2 must be computed for each excitation vector, to assist with the characterization of the particular excitation and to determine the amount of spin contamination of the state. Here, our aim is to provide for the first time in the SF methods literature a comprehensive resource on the derivation of the formulas for S^ 2 as well as its computational implementation. After a brief discussion of the theory of the SF Bethe–Salpeter equation (BSE) and some examples further illustrating the need for calculating S^ 2 , we present the derivation for the general equation for computing S^ 2 with the eigenvectors from an SF-BSE calculation, how it is implemented in a Python script, and timing information on how this calculation scales with the size of the SF-BSE Hamiltonian.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Preparation for a Measurement of Charge Asymmetry in the Bethe-Heitler Process

We have prepared a measurement of the energy asymmetry in wide- and medium-angle electron/positron pair production off protons and heavy targets. This asymmetry is caused by the interference between the first- and second-order Born diagrams and the Compton scattering diagram. It directly probes aspects of QED, as well as providing a direct measurement of the real part of the Compton amplitude. It will be conducted at the HI??S facility at Duke University, using a 60 MeV photon beam. This dissertation serves as documentation of the preparation stage of the Bethe-Heitler experiment. The major was the recommissioning of the vertical drift chambers previously used in the Q-weak experiment at the Jefferson Lab. Cosmic test runs were conducted, drift time data were collected and efficiency plateaus were measured. We made modifications to the JLAB Hall A analyzer to suit the geometry and drift characteristics of these wire chambers. The analyzer was used for the reconstruction of the trajectories of cosmic ray test runs with the results confirmed by direct measurement of trigger geometry. Spatial and angular resolution is estimated to ~300?? and 0.17° respectively. Geant 4 simulations with generated Bethe-Heitler pairs satisfying theoretical differential cross sections. It was used to check detector acceptance, optimize apparatus layout, and estimate measurable energy asymmetry. The measurable asymmetries from electron/positron pairs with polar angles around between approximately 5° and 8°, azimuthal angles differing by 180°, and energy differing by approximately 9 MeV to 15 MeV are predicted to be above 10%. The kinematics of primary vertices are reconstructed using the data from wire chambers in the simulation. The energy resolution is determined to be better than 1MeV.

Chen, Haoyu↗
DOE OSTI2025

Direct local parametrization of nuclear state densities using the back-shifted Bethe formula

Level densities are often parametrized using the back-shifted Bethe formula (BBF) for nuclei that possess experimental data for s-wave neutron resonance average spacings and a complete discrete level sequence at low excitation energies. However, these parametrizations require the additional modeling of the dependence of the spin-cutoff parameter on excitation energy. Here, in this work, we avoid the need to model the spin distribution of level densities by using the experimental data to parametrize directly the state densities, for which the BBF does not depend on the spin-cutoff parameter. This approach allows for a local parameterization of state densities that is independent of the spin-cutoff parameter. We provide these parameters in a tabulated form for applications in nuclear reaction calculations and for testing microscopic approaches to state densities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

GPU-Accelerated Solution of the Bethe–Salpeter Equation for Large and Heterogeneous Systems

We present a massively parallel GPU-accelerated implementation of the Bethe–Salpeter equation (BSE) for the calculation of the vertical excitation energies (VEEs) and optical absorption spectra of condensed and molecular systems, starting from single-particle eigenvalues and eigenvectors obtained with density functional theory. The algorithms adopted here circumvent the slowly converging sums over empty and occupied states and the inversion of large dielectric matrices through a density matrix perturbation theory approach and a low-rank decomposition of the screened Coulomb interaction, respectively. Further computational savings are achieved by exploiting the nearsightedness of the density matrix of semiconductors and insulators to reduce the number of screened Coulomb integrals. We scale our calculations to thousands of GPUs with a hierarchical loop and data distribution strategy. The efficacy of our method is demonstrated by computing the VEEs of several spin defects in wide-band-gap materials, showing that supercells with up to 1000 atoms are necessary to obtain converged results. We discuss the validity of the common approximation that solves the BSE with truncated sums over empty and occupied states. In conclusion, we then apply our GW-BSE implementation to a diamond lattice with 1727 atoms to study the symmetry breaking of triplet states caused by the interaction of a point defect with an extended line defect.

Absorption spectra↗
DOE OSTI2023

Optimized attenuated interaction: Enabling stochastic Bethe–Salpeter spectra for large systems

We develop an improved stochastic formalism for the Bethe–Salpeter equation (BSE), based on an exact separation of the effective-interaction W into two parts, W = (W – vW) + vW, where the latter is formally any translationally invariant interaction, vW(r – r'). When optimizing the fit of the exchange kernel vW to W, using a stochastic sampling W, the difference W – vW becomes quite small. Then, in the main BSE routine, this small difference is stochastically sampled. Furthermore, the number of stochastic samples needed for an accurate spectrum is then largely independent of system size. While the method is formally cubic in scaling, the scaling prefactor is small due to the constant number of stochastic orbitals needed for sampling W.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Bloch and Bethe Ansätze for the Harper model: A butterfly with a boundary

Based on a recent generalization of Bloch's theorem, herein we present a Bloch Ansatz for the Harper model with an arbitrary rational magnetic flux in various geometries, and solve the associated Ansatz equations analytically. In the case of a cylinder and a particular boundary condition, the energy spectrum of edge states has no dependence on the length of the cylinder, which allows us to construct a quasi-one-dimensional edge theory that is exact and describes two edges simultaneously. We prove that energies of bulk states, generating the so-called Hofstadter's butterfly, depend on a single geometry-dependent spectral parameter and have exactly the same functional form for the cylinder and the torus with general twisted boundary conditions, and argue that the (edge) bulk spectrum of a semi-infinite cylinder in an irrational magnetic field is (the complement of) a Cantor set. Finally, realizing that the bulk projection of the Harper Hamiltonian is a linear form over a deformed Weyl algebra, we introduce a Bethe Ansatz valid for both cylinder and torus geometries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Optical and magneto-optical properties of ferromagnetic monolayer CrBr 3 : A first-principles G W and G W plus Bethe-Salpeter equation study

The discovery of atomically thin two-dimensional (2D) magnetic semiconductors has triggered enormous research interest recently. In this paper, we use first-principles many-body perturbation theory to study a prototypical 2D ferromagnetic semiconductor, monolayer chromium tribromide (CrBr 3 ). With broken time-reversal symmetry, spin-orbit coupling, and excitonic effects included through the full-spinor GW and GW plus Bethe-Salpeter equation (GW-BSE) methods, we compute the frequency-dependent layer polarizability tensor and dielectric function tensor that govern the optical and magneto-optical (MO) properties. In addition, we provide a detailed theoretical formalism for simulating magnetic circular dichroism, MO Kerr effect, and Faraday effect, demonstrating the approach with monolayer CrBr 3 . Due to reduced dielectric screening in 2D and the localized nature of the Cr d orbitals, we find strong self-energy effects on the quasiparticle band structure of monolayer CrBr 3 that give a 3.8 eV indirect bandgap. Also, excitonic effects dominate the low-energy optical and MO responses in monolayer CrBr 3 where a large exciton binding energy of 2.3 eV is found for the lowest bright exciton state with excitation energy at 1.5 eV. We further find that the MO signals demonstrate strong dependence on the excitation frequency and substrate refractive index. Furthermore, our theoretical framework for modeling optical and MO effects could serve as a powerful theoretical tool for future study of optoelectronic and spintronics devices consisting of van der Waals 2D magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Analytic Sensitivity Coefficients for Bethe's Solution of the Neutron Slowing Down Equation

Neutron slowing down theory is used to derive expressions for the sensitivity coefficients of the neutron collision density in a hydrogenous infinite medium with respect to the fixed source, scattering probability, and macroscopic nuclear cross sections. Analytic expressions for Bethe’s solution of the neutron slowing down equation are derived for the constant cross section approximation with a point, uniform, and gamma lethargy spectrum. Analytic expressions for the corresponding sensitivity coefficients are derived and used to verify Monte Carlo neutron transport calculations.

Analytic Benchmark↗
DOE OSTI2021

Bethe Ansatz solutions for certain Periodic Quantum Circuits

I derived Bethe Ansatz equations for two model Periodic Quantum Circuits: (1) XXZ model; (2) Chiral Hubbard Model. I obtained explicit expressions for the spectra of the strings of any length. These analytic results may be useful for calibration and error mitigations in modern engineered quantum platforms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

An optimally tuned range-separated hybrid starting point for ab initio GW plus Bethe–Salpeter equation calculations of molecules

The ab initio GW plus Bethe–Salpeter equation (GW-BSE, where G is the one particle Green's function and W is the screened Coulomb interaction) approach has emerged as a leading method for predicting excitations in both solids and molecules with a predictive power contingent upon several factors. Among these factors are the (1) generalized Kohn–Sham eigensystem used to construct the GW self-energy and to solve the BSE and (2) the efficacy and suitability of the Tamm–Dancoff approximation. Here, we present a detailed benchmark study of low-lying singlet excitations from a generalized Kohn–Sham (gKS) starting point based on an optimally tuned range-separated hybrid (OTRSH) functional. We show that the use of this gKS starting point with one-shot G0W0 and G0W0-BSE leads to the lowest mean absolute errors (MAEs) and mean signed errors (MSEs), with respect to high-accuracy reference values, demonstrated in the literature thus far for the ionization potentials of the GW100 benchmark set and for low-lying neutral excitations of Thiel’s set molecules in the gas phase, without the need for self-consistency. The MSEs and MAEs of one-shot G0W0-BSE@OTRSH excitation energies are comparable to or lower than those obtained with other functional starting points after self-consistency. Additionally, we compare these results with linear-response time-dependent density functional theory (TDDFT) calculations and find GW-BSE to be superior to TDDFT when calculations are based on the same exchange-correlation functional. This work demonstrates tuned range-separated hybrids used in combination with GW and GW-BSE can greatly suppress starting point dependence for molecules, leading to accuracy similar to that for higher-order wavefunction-based theories for molecules without the need for costlier iterations to self-consistency.

McKeon, Caroline A. (ORCID:0000000217373503)↗