Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ba”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Stellar Laboratories: 3. New Ba 5, Ba 6, and Ba 7 Oscillator Strengths and the Barium Abundance in the Hot White Dwarfs G191-B2B and RE 0503-289

Context. For the spectral analysis of high-resolution and high-signal-to-noise (S/N) spectra of hot stars, state-of-the-art non-local thermodynamic equilibrium (NLTE) model atmospheres are mandatory. These are strongly dependent on the reliability of the atomic data that is used for their calculation. Aims. Reliable Ba 5-7 oscillator strengths are used to identify Ba lines in the spectra of the DA-type white dwarf G191−B2B and the DO-type white dwarf RE 0503−289 and to determine their photospheric Ba abundances. Methods. We newly calculated Ba v-vii oscillator strengths to consider their radiative and collisional bound-bound transitions in detail in our NLTE stellar-atmosphere models for the analysis of Ba lines exhibited in high-resolution and high-S/N UV observations of G191−B2B and RE 0503−289. Results. For the first time, we identified highly ionized Ba in the spectra of hot white dwarfs. We detected Ba vi and Ba vii lines in the Far Ultraviolet Spectroscopic Explorer (FUSE) spectrum of RE 0503−289. The Ba vi/Ba vii ionization equilibrium is well reproduced with the previously determined effective temperature of 70 000 K and surface gravity of log g=7.5. The Ba abundance is 3.5 +/- 0.5 × 10(exp−4) (mass fraction, about 23 000 times the solar value). In the FUSE spectrum of G191−B2B, we identified the strongest Ba vii line (at 993.41 Å) only, and determined a Ba abundance of 4.0 +/- 0.5 × 10(exp−6) (about 265 times solar). Conclusions. Reliable measurements and calculations of atomic data are a pre-requisite for stellar-atmosphere modeling. Observed Ba vi-vii line profiles in two white dwarfs' (G191−B2B and RE 0503−289) far-ultraviolet spectra were well reproduced with our newly calculated oscillator strengths. This allowed to determine the photospheric Ba abundance of these two stars precisely.

New Ba V↗
NASA NTRS1992

Coherent laser excitation of Ba-137 and Ba-138

Computations are carried out for the 1S(6s2)-1P(6s,6p) coherent laser excitation of Ba-137 and Ba-138 in a magnetic field. Results are presented for both the steady-state and time-dependent excited-state populations of the Zeeman-split magnetic sublevels. The quantum-statistical Liouville-equation approach (for the reduced density matrix) is compared to the rate-equations approach. Significant differences are found between these, due to the interference between strongly overlapping lines (especially for Ba-137). The time-evolution profiles indicate that the Ba-137 transient time is much longer than that of Ba-138.

Lam, Kai-Shue↗
NASA NTRS1986

Electron-impact ionization of laser-excited Ba-138 (... 5p6 6s 6p) and Ba-138 (... 5p6 6s 5d) atoms

Electron-impact ionization cross sections for laser-excited Ba-138 (... 5p6 6s 6p; 1P1, M = - 1) and cascade-populated Ba-138 (... 5p6 6s 5d; 1D + 3D) atoms were measured in the threshold to 10 eV energy range. The peak cross sections for the excited species are about a factor of 2 larger than that for ground-state Ba. In addition, it was demonstrated that ionization from individual magnetic substates of various hyperfine levels can be studied. The ionization cross sections in the case of Ba-138 (1P1) were found to be equal for the M = 0 and for the M = + or - 1 sublevels within the experimental error limit.

Trajmar, S.↗
NASA NTRS1993

Performance of two-pole bandpass filters photodefined on double-sided Y-Ba-Cu-O and Tl-Ba-Ca-Cu-O thin films

The performance of 7.3-GHz two-pole bandpass filters (5% bandwidth) fabricated on double-sided Y-Ba-Cu-O and Tl-Ba-Ca-Cu-O thin films deposited on LaAlO3 is discussed. At 77 K, the Tl-Ba-Ca-Cu-O and Y-Ba-Cu-O superconducting filters exhibited minimum passband insertion losses of 0.3 and 1.2 dB, respectively. An insertion loss of 3.4 dB was measured for an all-gold filter at 77 K.

TWO POLE BANDPASS FILTERS↗
NASA NTRS1992

Conductor-backed coplanar waveguide resonators of Y-Ba-Cu-O and Tl-Ba-Ca-Cu-O on LaAlO3

Conductor-backed coplanar waveguide (CBCPW) resonators operating at 10.8 GHz have been fabricated from Tl-Ba-Ca-O (TBCCO) and Y-Ba-Cu-O (YBCO) thin films on LaAlO3. The resonators consist of a coplanar waveguide (CPW) patterned on the superconducting film side of the LaAlO3 substrate with a gold ground plane coated on the opposite side. These resonators were tested in the temperature range from 14 to 106 K. At 77 K, the best of our TBCCO and YBCO resonators have an unloaded quality factor (Qo) 7 and 4 times, respectively, larger than that of a similar all-gold resonator. In this study, the Qo's of the TBCCO resonators were larger than those of their YBCO counterparts throughout the aforementioned temperature range.

Miranda, F. A.↗
NASA NTRS1994

Geometry and Unoccupied Electronic States of Ba and BaO on W(001)

A study aimed at understanding the geometrical and electronic properties of barium and oxygen coadsorbed on the tungsten(001) surface has been carried out by means of work-function measurements (Delta-phi), Auger-electron spectroscopy, low-energy electron diffraction, inverse photoelectron spectroscopy, and relativistic-electronic-structure calculations. A report of the experimental measurements and a comparison with theoretical results from embedded-cluster-model calculations are presented. Our experimental studies show that the work function of the W(001) surface (phi = 4.63 eV) is lowered to approximately 2.3-2.4 eV by coadsorption of 1 ML of Ba and O regardless of the order of deposition of these two species. The technique of IPS in the isochromat mode was used to determine the unoccupied electronic-energy band structure for ordered c (2 X 2) Ba and O layers on W(001). Several spectral features are observed above the Fermi level (E(F)), which we assign to transitions into Ba and W d-states. The measured two-dimensional electronic band structure is independent of the order of Ba and O deposition. Using embedded-cluster-model calculations, we investigated two possible adsorption configurations of an ordered c(2 X 2) adlayer of Ba and O on W(001): 'tilted,' where Ba and O are placed on alternate fourfold-hollow sites, and 'upright,' where the adsorbed atoms lay above the same site with Ba outer-most. The calculated densities of states for the tilted geometry show distinct peaks above E(F) originating from Ba and W d-orbitals and are in good agreement with the experimental results.

Lamouri, A.↗
NASA NTRS1991

s-process Ba, Nd, and Sm in presolar SiC from the Murchison meteorite

Ion microprobe isotopic measurements of Ba, Nd, and Sm in the K-series SiC size separates on which noble gas measurements were made by Lewis et al. (1990) are reported. All elements show isotopic abundance patterns characteristic for the s-process. The Ba-134/Ba-136 ratios are distinct from solar, indicating that s-Ba in SiC is different from that in the solar system. Ba-138/Ba-136 ratios decrease with grain size; if interpreted as being due to different neutron exposures, this trend is opposite of that shown by the Kr-86/Kr-82 ratios. Although other isotropic ratios for Ba and those for Nd and Sm differ in detail from theoretical predictions, the disagreements probably being due to uncertainties in the n-capture cross sections and simplifications in the models, the general agreement of the data with models of s-process nucleosynthesis support an AGB star origin for the relatively fine-grain SiC under consideration. Ba-136 in SiC is up to 85 percent pure s-process.

Zinner, Ernst↗
NASA NTRS1987

High-pressure study of the new Y-Ba-Cu-O superconducting compound system

Hydrostatic effects on the superconducting transition temperature of the Y-Ba-Cu-O compound system, resistively, up to 19 kbar are investigated. It is found that pressure has little effect on the superconducting state of Y-Ba-Cu-O, in marked contrast to the behavior of the K2NiF4-phase La-Ba-Cu-O and La-Sr-Cu-O systems. It is suggested that this effect may be due to chemical pressure associated with the smaller Y atoms already present in Y-Ba-Cu-O. X-ray powder-diffraction studies show that the high-temperature superconductivity in Y-Ba-Cu-O can only be attributed to one or more phases with structures different from the cubic perovskite or tetragonal layered ones.

Hor, P. H.↗
NASA NTRS1984

Theoretical electric quadrupole transition probabilities for Ca, Sr and Ba

The 1D-1S quadrupole transition probabilities for Ca, Sr and Ba have been computed using extended GTO and STO valence basis sets and configuration-interaction wavefunctions that include the important core-valence correlation effects. For Ba and Sr, the relativistic contraction of the core orbitals was accounted for in the GTO calculations by a relativistic effective-core potential. The computed Einstein coefficient for Ca of 39.6/s is in excellent agreement with the recent experimental value of 40 + or - 8/s. The best Einstein coefficients for Sr (44.7/s) and Ba (2.98/s) imply increasing quadrupole line strengths down the column. Relativistic effects substantially increase the quadrupole Einstein coefficient for Ba.

Bauschlicher, C. W., Jr.↗
NASA NTRS1989

Preparation of high T(c) Tl-Ba-Ca-Cu-O thin films by pulsed laser evaporation and Tl2O3 vapor processing

Tl-Ba-Ca-Cu-O superconducting thin films with zero-resistance temperatures up to 115 K have been prepared using a Tl2O3 vapor process on Ba-Ca-Cu-O precursor thin films. The Ba-Ca-Cu-O thin films were made by laser deposition on Y-stabilized ZrO2 substrates. This technique minimizes problems caused by the toxicity of Tl2O3, and its subsequent decomposition to the volatile and toxic Tl2O upon heating. Therefore, it may have practical application in the fabrication of high T(c) Tl-Ba-Ca-Cu-O superconducting thin-film devices.

Johs, B.↗
NASA NTRS1991

Chemical spray pyrolysis of Tl-Ba-Ca-Cu-O high-T(sub c) superconductors for high-field bitter magnets

The deposition of Tl-Ba-Ca-Cu-O thick films by spray pyrolyzing a Ba-Ca-Cu-O precursor film and diffusing thallium into the film to form the superconducting phase is examined. This approach was taken to reduce exposure to thallium and its health and safety hazards. The Tl-Ba-Ca-Cu-O system was selected because it has very attractive features which make it appealing to device and manufacturing engineering. Tl-Ba-Ca-Cu-O will accommodate a number of superconducting phases. This attribute makes it very forgiving to stoichiometric fluctuations in the bulk and film. It has excellent thermal and chemical stability, and appears to be relatively insensitive to chemical impurities. Oxygen is tightly bound into the systems, consequently there is no orthorhombic (conductor) to tetragonal (insulator) transition which would affect a component's lifetime. More significantly, the thallium based superconductors appear to have harder magnetic properties than the other high-Tc oxide ceramics. Estimates using magnetoresistance measurements indicate that at 77 K Tl2Ba2CaCu2O10 will have an upper critical field, H(sub c2) fo 26 Tesla for applied fields parallel to the c-axis and approximately 1000 Tesla for fields oriented in the a-b plane. Results to date have shown that superconducting films can be reproducibly deposited on 100 oriented MgO substrates. One film had a zero resistance temperature of 111.5 K. Furthermore, x ray diffraction analysis of the films showed preferential c-axis orientation parallel to the plane of the substrate. These results have now made it possible to consider the manufacture of a superconducting tape wire which can be configured into a topology useful for high-field magnet designs. The research which leads to the preparation of these films and plans for further development are reviewed.

Derochemont, L. Pierre↗
NASA NTRS1967

Electronic structure of Ca, Sr, and Ba under pressure.

Electronic band structure calculations phase of Ca, Sr and Ba over wide range of atomic volumes under pressure electronic band structure calculations for fcc phase of Ca, Sr and Ba over wide range of atomic volumes under pressure electronic band structure calculations for fcc phase of Ca, Sr and Ba over wide range of atomic volumes under pressure

BARIUM↗
NASA NTRS1975

Resonance lines of Cs II, Ba III, and La IV

The resonance line spectra of ions in the Xe I isoelectronic sequence, consisting of the five transitions to the 5p6 150 ground state from levels with J = 1 in the 5p5 5d and 6s configurations, have been observed for Cs II, Ba III, and La IV. The observations were made with a sliding spark on the 10.7-m normal-incidence vacuum spectrograph at NBS. The resonance transitions from the 5p5 6d and 7s configurations were also observed for these ions, except for that from 5p5 6d 3P1 of Ba III. Several resonance transitions from higher nd and ns levels were also observed. Estimated values for the J = 1 levels of the 5p5 7s configuration of Ce V were obtained by extrapolation. The derived ionization energies in eV are Cs II 23.17(4), Ba III 35.79(6), La IV 45.95(6), Ce V 65.55(25).

Reader, J.↗
NASA NTRS1988

Characterization of ZrO2 buffer layers for sequentially evaporated Y-Ba-CuO on Si and Al2O3 substrates

Thin film high temperature superconductors have the potential to change the microwave technology for space communications systems. For such applications it is desirable that the films be formed on substrates such as Al2O3 which have good microwave properties. The use of ZrO2 buffer layers between Y-Ba-Cu-O and the substrate has been investigated. These superconducting films have been formed by multilayer sequential electron beam evaporation of Cu, BaF2 and Y with subsequent annealing. The three layer sequence of Y/BaF2/Cu is repeated four times for a total of twelve layers. Such a multilayer film, approximately 1 micron thick, deposited directly on SrTiO3 and annealed at 900 C for 45 min produces a film with a superconducting onset of 93 K and critical temperature of 85 K. Auger electron spectroscopy in conjunction with argon ion sputtering was used to obtain the distribution of each element as a function of depth for an unannealed film, the annealed film on SrTiO3 and annealed films on ZrO2 buffer layers. The individual layers were apparent. After annealing, the bulk of the film on SrTiO3 is observed to be fairly uniform while films on the substrates with buffer layers are less uniform. The Y-Ba-Cu-O/ZrO2 interface is broad with a long Ba tail into the ZrO2, suggesting interaction between the film and the buffer layer. The underlying ZrO2/Si interface is sharper. The detailed Auger results are presented and compared with samples annealed at different temperatures and durations.

Valco, George J.↗
NASA NTRS1990

Phase compatibilities of YBa2Cu3O(9-delta) type structure in quintenary systems Y-Ba-Cu-O-X (impurity)

Electrical transport properties of the oxidic high T(sub c) superconductors are significantly affected by the presence of minor amounts of various elements adventing as impurities, e.g., from the chemical environment during manufacturing. YBa2Cu3O(9-delta) is prone to an extinction of the superconductivity on (partial) substitution of all four elemental components. E.g., Pr (for Y), La (for Ba), Zn (for Cu) or peroxygroup (for O) substituents will alter some of the superconductivity preconditions, like mixed valence state in Cu3O7/O(9-delta) network or structural distortion of the network. Although various pseudoternary chemical equilibrium phase diagrams of the Y(O)-Ba(O)-Cu(O) system now are available, no consensus is generally shown, however, this is partly due to lack of compatible definitions of the equilibrium conditions. Less information is available about the phase compatibilities in the appropriate quaternary phase diagram (including oxygen) and virtually no information exists about any pentenary phase diagrams (including one impurity). Unfortunately, complexity of such systems, stemming both from number of quaternary or pentenary compounds and from visualizing the five-component phase system, limits this presentation to more or less close surroundings of the YBa2Cu3O(9-delta) type phase in appropriate pseudoquaternary or pseudopseudoternary diagrams, involving Y-Ba-Cu and O, O-CO2, alkaline metals, Mg and alkaline earths, and Sc and most of the 3-d and 4-f elements. The systems were investigated by means of x ray diffraction, neutron diffraction and chemical analytical methods on samples prepared by sol-gel technique from citrates. The superconductivity was characterized by measuring the diamagnetic susceptibility by SQUID.

Karen, P.↗
NASA NTRS1990

Yttrium enrichment and improved magnetic properties in partially melted Y-Ba-Cu-O materials

The yttrium-rich compositions in the Y-Ba-Cu-O system were mapped out in a systematic manner to quantify their magnetic properties and to correlate them with the microstructure and phase composition as determined by scanning electron microscopy and X-ray diffraction analysis. It is found that the microstructure of Y-Ba-Cu-O compositions is a sensitive function of both their composition and processing conditions. Measurements of magnetic susceptibility and maximum (low-field) and remanent magnetization for the system Y:Ba:Cu = x:2:3 show highest values for x = 2. The corresponding structures involve numerous small crystals of Y2BaCuO5 (211) embedded in highly ordered assemblages of continous YBa2Cu3O(7-y) (123) layers.

Alterescu, Sidney↗
NASA NTRS1995

On Ba(+) production in the CRIT 2 experiment

Analysis of partical data from the CRIT 2 experiment, studying Alfven's critical ionization velocity (CIV) effect, shows that the density of newly created ions (presumably Ba(+) from the shaped-charge beam) is consistent with the increase in total plasma density measured by the independent RF plasma probe on board (Swenson et al., 1990) at the most active time period. We model this ion production using the measured electron flux data and the neutral barium model of Stenbaek-Nielsen et al. (1990a). To identify the main source mechanisms which may contribute most to the barium ionization, a simple model for the barium ion density at the payload location is developed based on Liouvilles theorem. We estimate that the electron impact ionization is responsible for 90% of the barium ion production observed by CRIT 2 in the first release and up to 45% in the second release. By employing a two-state approximation calculation (Rapp and Francis, 1962), the Ba-O(+) charge exchange cross section is found to range from about 2.0 X 10(exp -17) sq cm at a velocity of 4 km/s to 2.0 X 10(exp -15) sq cm at a velocity of 20 km/s. This result suggests that the Ba-O(+) charge exchange is probably dominant among all the non-CIV ionization processes. By considering the charge exchange process in our density model, the barrium ion densities are calculated for the two releases on CRIT II. The comparison between the model results and the observed data is found to be resonably consistent if the cross sections, as calculated above, are multiplied by 0.3 for the first release and 1.0 for the second release. Our result suggests that the charge exchange process could be the most important non-CIV ionization mechanism in the CRIT II experiment and it should be considered carefully case by case in CIV experiments.

Liou, K.↗