Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BWR TYPE REACTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Irradiation Dose of the Woody Tier of a Coniferous Forest Due to Accidental Emissions from NPP

An approach to the comparative assessment of the impact of accidental radioactive emissions on the biota and radioecological validation of nuclear fuel cycle objects is presented. It is shown that the dose loads on woody tier in a coniferous forest as a result of severe accidents in NPPs with PWR-890, BWR-1412, and EPR-1600 significantly exceed the limit recommended by the ICRP. The impact of the radiation factor can result in serious disturbances in forest ecosystems in the immediate vicinity of NPPs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI1992

Nuclear Safety [Vol. 33, No. 4, October-December 1992]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 499 Technical Note: Nuclear Regulatory Commission’s Examination Question Bank System, C. L Jensen and N. L. Skinner; 506 Report on the Specialists’ Meeting on Passive and Active Safety Features of Liquid-Metal Fast Breeder Reactors Organized by the International Atomic Energy Agency at Oarai Engineering Centre of Power Reactor and Nuclear Development Corporation, Japan, November 5-7,1991, S. R. Paranjpe; ACCIDENT ANALYSIS: 514 A Review of Hydrogen Production During Melt/Water Interaction in LWRs, D. F. Fletcher, B. D. Turland, and S. P. A. Lawrence; 535 A Review of the U 3 0 8 -Al Reaction as a Potential Heat Source in Research and Test Reactor Accidents, J. L. Snelgrove; CONTROL AND INSTRUMENTATION: 543 Multilevel Interfaces for Power Plant Control Rooms II: A Preliminary Design Space, K. J. Vicente; DESIGN FEATURES: 549 Twenty-Second DOE/NRC Nuclear Air Cleaning and Treatment Conference, R. R. Bellamy, D. W. Moeller, and M. W. First; 562 Book Review: Safety Assessment of Unit 5 (WWER-440/W-213) of the Greifswald Nuclear Power Station, M. H. Fontana; WASTE AND SPENT FUEL MANAGEMENT: 576 Activities Related to Waste and Spent Fuel Management, M. D. Muhlheim and E. G. Silver; OPERATING EXPERIENCES: 586 Analysis of Corrective Actions Applied to Nuclear Power Plant Operations, A. E. Cross; 593 Reactor Shutdown Experience, Compiled by J. W. Cletcher; 596 Operating U.S. Power Reactors, Compiled by M. D. Muhlheim and E. G. Silver; 609 Non-Commercial Power Operating Experience; 614 World Nuclear Performance, Compiled by M. D. Muhlheim; RECENT DEVELOPMENTS: 623 General Administrative Activities, Compiled by M. D. Muhlheim and E. G. Silver; 635 Reports, Standards, and Safety Guides, D. S. Queener; 639 Proposed Rule Changes as of June 30, 1992; ANNOUNCEMENTS: 513 Fourth International Conference on Nuclear Fuel Reprocessing and Waste Management RECOD '94; 585 International Topical Meeting on Advanced Reactors Safety; 622 International Workshop on Implementation of ALARA at Nuclear Power Plants; 648 Short Course on Nuclear Criticality Safety; 648 8th Topical Meeting on Problems in Reactor Physics MEPhi-VOLGA-93; 643 The Authors; 646 Reviewers of Nuclear Safety, Vol. 33

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI1989

Nuclear Safety [Vol. 30, No. 1, January-March 1989]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 1 International Conference on Thermal Reactor Safety: NUCSAFE 88 by A. P. Malinauskas and J. G. Pruett; ACCIDENT ANALYSIS: 18 Chernobyl Today: State of Research by A. Yu. Gagarinskii; CONTROL AND INSTRUMENTATION: 23 Problems Associated with Routine In-Plant Radioactive Effluent Monitoring Systems at U.S. Light-Water Reactors by Barry G. Wahlig, David M. Walker, Mahmoud R. Ghavi, and John M. Palms; DESIGN FEATURES: 34 Twentieth DOE/NRC Nuclear Air-Cleaning Conference by R. R. Bellamy, D. W. Moeller, and M. W. First, 46 Design Options for the Core Support Structure for Liquid-Metal-Cooled Reactor Plants by J. P. Burelbach, W. J. Kann, J. G. Saiveau, and R. W. Seidensticker; ENVIRONMENTAL EFFECTS: 53 The Radiological Consequences of the Chernobyl Accident by L. V. Konstantinov and A. J. González; WASTE AND SPENT FUEL MANAGEMENT: 70 Activities Related to Waste Management Compiled by E. G. Silver; OPERATING EXPERIENCES: 80 Fuel Performance Annual Report for 1986 by W. J. Bailey, 103 Safety Considerations Related to 12-Hour Shift Schedules by S. Gould, 105 Reactor Shutdown Experience Compiled by J. W. Cletcher, 108 Operating U.S. Power Reactors Compiled by E. G. Silver; RECENT DEVELOPMENTS: 130 General Administrative Activities Compiled by E. G. Silver, 140 Reports, Standards, and Safety Guides by D. S. Queener, 145 Status of Power-Reactor Licensing Activities Compiled by E. G. Silver, 153 Proposed Rule Changes as of Sept. 30, 1988; ANNOUNCEMENTS: 69 Northwestern University Short Course on Radiation Safety, 79 International Seminar on Fission Product Transport Processes in Reactor Accidents, 129 Harvard School of Public Health Offers Short Courses, 152 MIT Offers Summer Short Courses on Reactor Safety and Nodal Analysis, 152 Seminar on Use of PCs in Probabilistic Safety Analysis, 157 The Authors, 160 Indexes to Nuclear Safety, Volume 29.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Westinghouse Quiver - A simple and safe system for the complete handling and storing of failed BWR and PWR fuel rods and fragments - 17049

Background: Extracted leaking fuel rods from fuel assemblies have been stored in the spent fuel pools at the Nuclear Power Plants for many years. Sending those fuel rods to an intermediate storage has been very difficult due to the uncertainty of the technical requirements. The Westinghouse Quiver is a container that can be used from the first moment when the leaking fuel rod is extracted from the Fuel Assembly. The leaking fuel rod can be placed in the Westinghouse Quiver. When the Quiver is filled, it can be sealed and dried and then treated as a regular fuel assembly during intermediate storage and final repository. Purpose of System: The purpose of the system is to store leaking fuel rods, broken rods and fuel rod fragments leak tight in the fuel pool and after vacuum drying and permanent sealing at an intermediate storage facility. The Quiver is designed to be fully compatible with a regular fuel assembly. That means all handling of the Quiver in a Nuclear Power Plant, during transportation or storage is also identical to that of a regular fuel assembly. Fulfilling these criteria together with functional testing, the Quiver is considered acceptable for long time storage of leaking fuel rods, both in dry or wet condition. The Quiver has been qualified in Switzerland for use in the spent fuel pool, intermediate storage, and for a final repository. The system will be implemented as well in Sweden during 2016-2019. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Improvements in the reactor core isolation cooling (RCIC) pump model

As part of the efforts to understand the unexpected “self-regulating” mode of the RCIC (Reactor Core Isolation Cooling) systems that was observed during the Fukushima accidents and to extend BWR RCIC and PWR AFW (Auxiliary Feed Water) operational range and flexibility, mechanistic models for the Terry turbine are being developed and tested with the RELAP-7 code to simulate the RCIC system. In the previous work, we developed a set of analytical models for the normal working conditions, as well as the two-phase off-design conditions, of the RCIC system, based on Sandia’s original work. An under-expanded jet model was developed to replace the CFD-based reduced-order model in the Sandia work to obtain the velocity and thermodynamic conditions of the turbine stator inlet. The models include both an adiabatic expansion process inside the nozzle and a free expansion process outside of the nozzle to ambient pressure. For the two-phase off-design conditions, two well-established choking models were used - the Isentropic Homogenous Equilibrium Model (IHEM) and Moody’s model. The new twophase Terry turbine model used the choking models to calculate the mass flow rate, the critical pressure at the nozzle throat, and steam quality. The two-phase nozzle expansion model was also developed by considering the vapor phase with a similar model for the single-phase case with the assumption that the liquid phase would slip along the wall with a much slower speed and will not contribute to the impulse on the rotor.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2016

Benchmark of Spacer Grid Models used in Nuclear Power Plants

The fuel bundles of both PWR and BWR reactors require spacers to maintain the integrity and spacing of the slender fuel rods. These spacers can provide benefits such as increased mixing and turbulence, which increases heat distribution, leading to better Departure from Nucleate Boiling (DNB) conditions in PWRs. They also enhance the critical power ratios by increasing the thickness of the liquid layer in BWRs. However, the spacers also cause a pressure drop which must be engineered into the performance and operation. The flow within a rod bundle involves a number of complicated factors, such as cross flow, (de)entrainment of liquid layer, bubble or droplet break up/join. This requires specialized 3 dimensional computational fluid dynamics for the complete flow, however, most of the newly developed models have been accomplished by industry, so they are proprietary and in addition require extensive programming and cost to implement. In the public domain, a number of 1 dimensional equations have been developed that could benefit in initial design and decision making, if the equations are valid in the new and different applications the models are used. In 2002, an OECD/NRC BFBT benchmark workshop determined the variables used in the development of models, to predict flow within nuclear fuel bundles, had not been updated with technological advances to replace general theory and characteristics. If those properties could be identified and modeled, they could be applied to a wider range of conditions. This study utilizes NUPEC BFBT tests' measured data, on an average spacer over a range of pressure and flows, which was determined to be the most detailed measured data available. The focus is to describe the mathematical models of spacer grids and validate them with experimental results. This study consists of compiling and comparing available and established single phase equations and models computations. While these models may not have the desired degree of accuracy for final decisions, they may be accurate enough for the initial phases of design. No conclusion on a universal equation that fits all boundary conditions accurately or detailed effect of properties was determined. However, by using the BFBT experimental data, boundary conditions where the spacer grid models can be useful were identified. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2016

Fuel hardware considerations for BWR PCI mitigation

Pellet-clad interaction (PCI) remains a potential cause of fuel failures and is a major consideration in the design of new BWR fuel assemblies. The design and material properties of both the pellet and the cladding have been investigated and optimized to mitigate the impact of PCI. The creep behavior of standard and ADOPT (Advanced Doped Pellet Technology) fuel pellets has been measured across a wide range of temperatures. Dopants have been found to increase the high temperature creep properties of the fuel and can explain the improved PCI resistance of ∼5 kW/m in ramp tests. Other effects, such as chemical trapping of fission products and modified crack patterns cannot be ruled out, but these are at an earlier stage of investigation. It is shown that the enhanced creep effect occurs at the high centerline fuel temperatures during a ramp test, but is not present during the much lower temperatures of commercial fuel operation. Thus low temperature PCI benefits in routine commercial operation are not expected. The development of cladding materials with liner provided a great improvement for PCI mitigation in BWRs. With the softer Westinghouse liner, stepwise ramp tests have shown a benefit of ca 15-20 kW/m. Differences between stepwise and single step ramp tests are discussed. Notably the benefit of the liner remains under all types of fuel operation and temperatures. It is also thought to provide significant benefit in the case of fuel relocation or pellet defects such as missing pellet chips. The results of post irradiation examination (PIE) of a commercial fuel rod that experienced fuel fragment relocation are presented in the paper. To provide the maximum PCI benefit in the next generation BWR fuel design, TRITON11, the proven benefits of both the liner and ADOPT pellets will be included. To reduce the hydrogen pickup, below that of Zircaloy-2, the outer cladding component will be made from HiFi. TRITON11, ADOPT and HiFi are registered trademarks of Westinghouse Electric Company LLC in the United States. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2016

Fuel rod thermo-mechanic analysis of Kuosheng NPP in MSIVC transient with RELAP5 MOD3.3/Fraptran/Python code in SNAP interface

Kuosheng NPP (Nuclear Power Plant) is located on the northern coast of Taiwan. Its nuclear steam supply system (NSSS) is a type of boiling water reactor (BWR/6) designed and built by General Electric on a twin unit concept. Each unit includes two loops of recirculation piping and four main steam lines, with the thermal rated power of 2894 MWt. Unit 1 started SPU (Stretch Power Uprate) from Cycle 24 and Unit 2 started SPU from Cycle 23. The operating power is 104.7% of the OLTP (Original Licensed Thermal Power), which is 3030 MWt now. In order to estimate the safety of Kuosheng NPP, the methodology of Kuosheng NPP SPU safety analysis model was developed. This methodology is shown in Fig. 1. There are three main steps considered in this methodology. The first step is the development of the Kuosheng NPP SPU RELAP5 model. The next step is the main steam line isolation valve closure (MSIVC) analysis of Kuosheng NPP SPU RELAP5 model in order to confirm the maximum pressure of vessel below the acceptance limit of 9.58 MPa. The final step is the fuel rods integrity analysis of FRAPTRAN under the above conditions. From FRAPTRAN analysis results, we find that the peak value of cladding hoop strain is smaller than 0.01, the acceptance limit; furthermore, the fuel enthalpy values are smaller than 150 cal/g. These two results indicate that the fuel rods are still in safe condition after turbine trip accident. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

On the Solidification and Structure Formation during Casting of Large Inserts in Ferritic Nodular Cast Iron

The graphite nodule count and size distributions for boiling water reactor (BWR) and pressurized water reactor (PWR) inserts were investigated by taking samples at heights of 2160 and 1150 mm, respectively. In each cross section, two locations were taken into consideration for both the microstructural and solidification modeling. The numerical solidification modeling was performed in a two-dimensional model by considering the nucleation and growth in eutectic ductile cast iron. The microstructural results reveal that the nodule size and count distribution along the cross sections are different in each location for both inserts. Finer graphite nodules appear in the thinner sections and close to the mold walls. The coarser nodules are distributed mostly in the last solidified location. The simulation result indicates that the finer nodules are related to a higher cooling rate and a lower degree of microsegregation, whereas the coarser nodules are related to a lower cooling rate and a higher degree of microsegregation. The solidification time interval and the last solidifying locations in the BWR and PWR are also different.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2016

Simulation of reflooding on two parallel heated channel by TRACE

In case of Loss-Of-Coolant accident (LOCA) in a Boiling Water Reactor (BWR), heat generated in the nuclear fuel is not adequately removed because of the decrease of the coolant mass flow rate in the reactor core. This fact leads to an increase of the fuel temperature that can cause damage to the core and leakage of the radioactive fission products. In order to reflood the core and to discontinue the increase of temperature, an Emergency Core Cooling System (ECCS) delivers water under this kind of conditions. This study is an investigation of how the power distribution between two channels can affect the process of reflooding when the emergency water is injected from the top of the channels. The peak cladding temperature (PCT) on LOCA transient for different axial level is determined as well. A thermal-hydraulic system code TRACE has been used. A TRACE model of the two heated channels has been developed, and three hypothetical cases with different power distributions have been studied. Later, a comparison between a simulated and experimental data has been shown as well.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Dancoff-based Wigner-Seitz approximation for the subgroup resonance self-shielding in the VERA neutronic simulator MPACT

The MPACT neutronics module of the Virtual Environment for Reactor Analysis (VERA) has used the subgroup method for resonance self-shielding calculation, for which two-dimensional (2D) fixed-source transport calculations are performed using the method of characteristics for resonance energy groups. When considering thermal feedbacks, the subgroup calculation must be performed at each outer iteration. Therefore, the computing time for cross section processing is a significant burden for computational efficiency. The Dancoff-based Wigner-Seitz approximation (DWA) capability has been implemented into MPACT in conjunction with the subgroup method, which has been used in SCALE/XSProc since SCALE version 6.0 and has recently been called an equivalent Dancoff-factor cell (EDC) method. The issue of relatively large reactivity bias in DWA for the gadolinia rods was resolved by introducing multiple Dancoff factors. Benchmark results for the VERA pressurized and boiling water reactor benchmark suites show that the DWA capability would significantly enhance computational efficiency with comparable accuracy. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Multiscale thermal hydraulic coupling methods for boiling water reactor simulation

During the last two years, the Virtual Environment for Reactor Applications (VERA) has been extended to simulate boiling water reactors (BWRs). The thermal hydraulic effects present in BWRs are far more complex than those in pressurized water reactors (PWRs). Therefore, the runtime is significantly increase and convergence behavior worse compared to PWRs. Most of the additional runtime is spent during the first few coupled iterations, when the power shape is still rapidly evolving, dramatically affecting the thermal hydraulics (TH). To alleviate the increased computational expense, a multiscale TH coupling approach was developed in VERA in which a highly efficient, simplified TH model is solved for several coupled iterations until the power shape is partially converged. The simplified solution is used to inform the assembly-wise flow distribution in the high-fidelity TH solver CTF, reducing the amount of work required to properly balance the pressure drop in each channel and reducing runtime for the couple calculation. Because the final TH calculations are performed with CTF, there is ultimately no impact on the accuracy of the converged solution. This paper presents the details of this multiscale TH coupling approach, along with results for a 4x4 array of GE-14 fuel bundles and whole-core coupled simulations of the Hatch core. These two cases show that the multiscale approach dramatically reduces the runtime of coupled BWR simulations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2016

US Efforts in Support of Examinations at Fukushima Daiichi – 2016 Evaluations

Although it is clear that the accident signatures from each unit at the Fukushima Daiichi Nuclear Power Station (NPS) [Daiichi] differ, much is not known about the end-state of core materials within these units. Some of this uncertainty can be attributed to a lack of information related to cooling system operation and cooling water injection. There is also uncertainty in our understanding of phenomena affecting: a) in-vessel core damage progression during severe accidents in boiling water reactors (BWRs), and b) accident progression after vessel failure (ex-vessel progression) for BWRs and Pressurized Water Reactors (PWRs). These uncertainties arise due to limited full scale prototypic data. Similar to what occurred after the accident at Three Mile Island Unit 2, these Daiichi units offer the international community a means to reduce such uncertainties by obtaining prototypic data from multiple full-scale BWR severe accidents. Information obtained from Daiichi is required to inform Decontamination and Decommissioning activities, improving the ability of the Tokyo Electric Power Company Holdings (TEPCO) to characterize potential hazards and to ensure the safety of workers involved with cleanup activities. This document reports recent results from the US Forensics Effort to use information obtained by TEPCO to enhance the safety of existing and future nuclear power plant designs. This Forensics Effort, which is sponsored by the Reactor Safety Technologies Pathway of the Department of Energy Office of Nuclear Energy Light Water Reactor (LWR) Sustainability Program, consists of a group of US experts in LWR safety and plant operations that have identified examination needs and are evaluating TEPCO information from Daiichi that address these needs. Examples presented in this report demonstrate that significant safety insights are being obtained in the areas of component performance, fission product release and transport, debris end-state location, and combustible gas generation and transport. In addition to reducing uncertainties related to severe accident modeling progression, these insights are being used to update guidance for severe accident prevention, mitigation, and emergency planning. Furthermore, reduced uncertainties in modeling the events at Daiichi will improve the realism of reactor safety evaluations and inform future D&D activities by improving the capability for characterizing potential hazards to workers involved with cleanup activities.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2017

Multi-phase model development to assess RCIC system capabilities under severe accident conditions

The Reactor Core Isolation Cooling (RCIC) System is a safety-related system that provides makeup water for core cooling of some Boiling Water Reactors (BWRs) with a Mark I containment. The RCIC System consists of a steam-driven Terry turbine that powers a centrifugal, multi-stage pump for providing water to the reactor pressure vessel. The Fukushima Dai-ichi accidents demonstrated that the RCIC System can play an important role under accident conditions in removing core decay heat. The unexpectedly sustained, good performance of the RCIC System in the Fukushima reactor demonstrates, firstly, that its capabilities are not well understood, and secondly, that the system has high potential for extended core cooling in accident scenarios. Better understanding and analysis tools would allow for more options to cope with a severe accident situation and to reduce the consequences. The objectives of this project were to develop physics-based models of the RCIC System, incorporate them into a multi-phase code and validate the models. This Final Technical Report details the progress throughout the project duration and the accomplishments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2016

Behavior of high-burnup advanced LWR fuels under accident conditions

Advanced fuels for LWRs which consist of cladding materials with high corrosion resistance and pellets with lower fission gas release have been developed by utilities and fuel vendors to improve the fuel performance even in the high burnup region and also raise the safety level of current nuclear power plants to a higher one. In order to evaluate the adequacy of present safety criteria and safety margins in terms of such advanced fuels and provide a database for future regulation of them, JAEA has started a new extensive research program called ALPS-II program. The ALPS-II program is primarily composed of tests simulating a RIA (Reactivity Initiated Accident) (VA-5 and -6 tests) and a LOCA (Loss Of Coolant Accident) on high burnup advanced fuels irradiated in commercial PWR or BWRs and started in JFY 2008. Recently, post-test examinations on the fuel rods after the pulse irradiation tests of VA-5 and -6 were performed and the relationship between the failure limits of the high burnup advanced fuels with M-MDA{sup TM} cladding and the morphology of the hydrides precipitated in the cladding during normal operation was investigated. The difference in the crack surface morphology was observed between tests VA-5 and-6, which seemed to reflect the difference in the direction along which hydrides precipitate in the cladding. This indicates that the hydride precipitated in the cladding, which is considered to be dependent on the final heat treatment at fabrication, affects the fuel enthalpy at failure. In terms of the simulated LOCA test, integral thermal shock tests and high temperature oxidation tests have been conducted on high burnup PWR and BWR fuel cladding with advanced materials, and their fracture limits, high temperature oxidation rates, etc. were investigated. In the recent integral thermal shock tests for high burnup BWR cladding, namely Zry-2/LK3 material, no fractures were observed. In terms of the oxidation rate tests, the oxidation rate of irradiated M5{sup TM} was similar to those of unirradiated Zry-4 and M5{sup TM} and lower than the values estimated by the Baker-Just equation. From the results of these tests, it was found that in terms of these materials the fracture boundaries do not decrease and the oxidation does not significantly accelerate in the burnup level examined.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2016

Quantification of reactivity margin in BWR spent fuel pools

Boiling water reactor (BWR) spent fuel pool (SFP) criticality safety analyses typically use the in-core k{sub inf} criterion methodology to demonstrate margin to safety. This method models all the fuel in the SFP with a limiting lattice design at a peak reactivity just above a specific in-core k{sub inf} limit. To bound all the fuel in the pool and future fuel with reasonable margin, these limits are often set conservatively high compared to the peak reactivities of actual BWR bundle designs. When current regulatory expectations are met for the quantification of bias and uncertainty adders to the criticality analyses, some results are quantified that are close to the 0.95 in-rack reactivity limit required by 10CFR50.68. The small margins being calculated in the criticality safety analyses have resulted in concerns that SFPs have less margin to safety than was present in the past; however, inherent in the peak reactivity in-core k{sub inf} criterion methodology used to assess these margins is a very conservative model of the fuel. While it is known that all the fuel in a BWR SFP is typically burned well past its peak reactivity exposure, it has been unknown how much reactivity margin could be quantified if bundles were modeled more realistically by accounting for their actual discharge exposure profiles, operational void fractions, control histories, and depletion fuel temperatures. In this study, fuel bundles were depleted to their explicit nodal discharge exposure while accounting for actual operational conditions defined by GEH/GNF's core simulator code, PANACEA. The use of these depleted isotopics in the criticality safety analysis is commonly referred to as taking 'burn-up credit' in the analysis. This paper provides a quantification of the reactivity margin available from burn-up credit in two currently operating BWR spent fuel pools. The evaluation demonstrates that many of the bundles in these storage configurations are significantly below the in-rack reactivity limit, even with the necessary bias and uncertainty adders included. The utilization of BWR burnup credit appears to be an attractive solution to consider when evaluating options for reduced neutron absorber credit or for quantifying additional margin to the regulatory in-rack k{sub eff} limit. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2016

Fuel design concept to stabilize boiling water reactors

A new BWR design concept is introduced where the standard fuel rod array is augmented with thin metallic fuel elements. The heat transfer characteristics of the thin elements mimic the effect of direct energy deposition and introduces a strong stabilizing effect on density wave oscillations. The metallic fuel elements can be introduced to existing fuel bundle designs where some rods are replaced or part-length fuel rods are augmented with the metallic elements. New fuel rod arrays can be envisioned, and one example is given, to suit the concept of the hybrid oxide-metal concept. Although metal fuels are not commonly utilized in the commercial fleet, they are common in naval applications, which makes the proposed hybrid uniquely suited for the disposition of plutonium.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2016

GNF fuel technology update

In 2015, Global Nuclear Fuel (GNF) launched the GNF3 fuel design by inserting lead-use assemblies into two boiling water reactors (BWRs) in the U.S. A lead use assembly is a nuclear fuel assembly which is inserted in a reactor core to confirm its performance. A third set of GNF3 lead-use assemblies are scheduled to be inserted into another reactor in the spring of 2017. GNF3 is a robust next-generation 10*10 fuel design that will improve both fuel cycle and fuel reliability. In addition, GNF3 will be delivered in a fully assembled condition - forgoing the need to insert fuel channels over the bundles at the site. The process of shipping BWR fuel in a channeled configuration is complex and requires an understanding of the potential high-cycle and low-cycle fatigue conditions that can occur during shipping, as characterized by accelerometer data from ship tests. The key component in evaluating channeled fuel shipping is the spacer, and the GNF3 spacer fatigue performance was found to be approximately twice that of GNF2. While fuel reliability has traditionally been related to the avoidance of fuel leakers, for the past 15 years channel - control blade interference has been a close second for concern. To eliminate this problem, GNF3 will come standard with NSF (a zirconium alloy) channels that are effectively resistant to fluence gradient-induced bow and shadow corrosion-induced bow. In addition to the development of GNF3, GNF is evaluating the use of advancing 3D metal printing or additive manufacturing for manufacturing fuel bundle components. Additive manufacture offers the hope of more flexibility in design and shorter manufacturing development cycles. However, since there is little experience with this technology in the nuclear industry, GNF has been evaluating the use of additive manufacture to fabricate small scale components that are easily retrieved from the reactor for testing. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗