Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BODY OF REVOLUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Scattering Amplitudes in a Neighborhood of Limit Rays in Short-Wave Diffraction by Elongated Bodies of Revolution

In the paper, diffraction problems of a plane wave by smooth, convex, and elongated bodies of revolution are considered within the framework of short-wave approximation (axially symmetric cases). The scattering amplitudes are calculated in the direction of limit rays, and the influence of the elongation of the scatterers on the amplitudes behavior is investigated. Mathematical techniques of our approach are based on the Green’s formulas in the exterior of the scatterers and numerical calculations of the wave field current in the boundary layers in the vicinity of the light-shadow zone. It is established that the elongation of axially symmetric bodies relatively weakly affects the scattering amplitudes of the short-wave asymptotics. The main contribution to the amplitudes is made by the solution of the 2D diffraction problem by a convex, smooth curve in the cross section of the scatterers by a plane containing the rotation axis.

97 MATHEMATICS AND COMPUTING↗

Leontovich–Fock Parabolic Equation Method in the Neumann Diffraction Problem on a Prolate Body of Revolution

This paper continues a series of publications on the shortwave diffraction of the plane wave on prolate bodies of revolution with axial symmetry in the Neumann problem. The approach, which is based on the Leontovich–Fock parabolic equation method for the two parameter asymptotic expansion of the solution, is briefly described. Two correction terms are found for the Fock’s main integral term of the solution expansion in the boundary layer. This solution can be continuously transformed into the ray solution in the illuminated zone and decays exponentially in the shadow zone. If the observation point is in the shadow zone near the scatterer, then the wave field can be obtained with the help of residue theory for the integrals of the reflected field, because the incident field does not reach the shadow zone. The obtained residues are necessary for the unique construction of the creeping waves in the boundary layer of the scatterer in the shadow zone.

97 MATHEMATICS AND COMPUTING↗

An unstructured body-of-revolution electromagnetic particle-in-cell algorithm with radial perfectly matched layers and dual polarizations

A novel electromagnetic particle-in-cell algorithm has been developed for fully kinetic plasma simulations on unstructured (irregular) meshes in complex body-of-revolution geometries. The algorithm, implemented in the BORPIC++ code, utilizes a set of field scalings and a coordinate mapping, reducing the Maxwell field problem in a cylindrical system to a Cartesian finite element Maxwell solver in the meridian plane. The latter obviates the cylindrical coordinate singularity in the symmetry axis. The choice of an unstructured finite element discretization enhances the geometrical flexibility of the BORPIC++ solver compared to the more traditional finite difference solvers. Symmetries in Maxwell’s equations are explored to decompose the problem into two dual polarization states with isomorphic representations that enable code reuse. The particle-in-cell scatter and gather steps preserve charge conservation at the discrete level. Our previous algorithm (BORPIC+) discretized the E and B field components of TE Φ and TM Φ polarizations on the finite element (primal) mesh. Here, we employ a new field-update scheme. Using the same finite element (primal) mesh, this scheme advances two sets of field components independently: (1) E and B of TE Φ polarized fields, (E z , E ρ , B Φ ) and (2) D and H of TM Φ polarized fields, (D Φ , H z , H ρ ). Since these field updates are not explicitly coupled, the new field solver obviates the coordinate singularity, which otherwise arises at the cylindrical symmetric axis, ρ = 0 when defining the discrete Hodge matrices (generalized finite element mass matrices). Here, a cylindrical perfectly matched layer is implemented as a boundary condition in the radial direction to simulate open space problems, with periodic boundary conditions in the axial direction. We investigate effects of charged particles moving next to the cylindrical perfectly matched layer. We model azimuthal currents arising from rotational motion of charged rings, which produce TMΦ polarized fields. Several numerical examples are provided to illustrate the first application of the algorithm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

To the Calculations of Scattering Amplitudes in Diffraction Problems for Elongated Bodies of Revolution

This paper is a complement to the article “Scattering amplitudes in a neighborhood of limit rays in short-wave diffraction by elongated bodies of revolution”. It contains discussions of some points of the article, which worth of more detailed considerations, such as the influence of the integration limits on the computation result of scattering amplitudes and the estimation of permissible values of scattering angle intervals as functions of parameters of the problems.

97 MATHEMATICS AND COMPUTING↗

Internal (Annular) and Compressible External (Flat Plate) Turbulent Flow Heat Transfer Correlations.

Here we provide a discussion regarding the applicability of a family of traditional heat transfer correlation based models for several (unit level) heat transfer problems associated with flight heat transfer estimates and internal flow heat transfer associated with an experimental simulation design (Dobranich 2014). Variability between semi-empirical free-flight models suggests relative differences for heat transfer coefficients on the order of 10%, while the internal annular flow behavior is larger with differences on the order of 20%. We emphasize that these expressions are strictly valid only for the geometries they have been derived for e.g. the fully developed annular flow or simple external flow problems. Though, the application of flat plate skin friction estimate to cylindrical bodies is a traditional procedure to estimate skin friction and heat transfer, an over-prediction bias is often observed using these approximations for missile type bodies. As a correction for this over-estimate trend, we discuss a simple scaling reduction factor for flat plate turbulent skin friction and heat transfer solutions (correlations) applied to blunt bodies of revolution at zero angle of attack. The method estimates the ratio between axisymmetric and 2-d stagnation point heat transfer skin friction and Stanton number solution expressions for sub-turbulent Reynolds numbers %3C1x10 4 . This factor is assumed to also directly influence the flat plate results applied to the cylindrical portion of the flow and the flat plate correlations are modified by

42 ENGINEERING↗

SPINS OF LARGE ASTEROIDS: A HINT OF A PRIMORDIAL DISTRIBUTION IN THEIR SPIN RATES

The Asteroid Belt and the Kuiper Belt are relics from the formation of our solar system. Understanding the size and spin distribution of the two belts is crucial for a deeper understanding of the formation of our solar system and the dynamical processes that govern it. In this paper, we investigate the effect of collisions on the evolution of the spin distribution of asteroids and KBOs. We find that the power law nature of the impactors’ size distribution leads to a Lévy distribution of the spin rates. This results in a power law tail in the spin distribution, in stark contrast to the usually quoted Maxwellian distribution. We show that for bodies larger than 10 km, collisions alone lead to spin rates peaking at 0.15–0.5 revolutions per day. Comparing that to the observed spin rates of large asteroids (R > 50 km), we find that the spins of large asteroids, peaking at ∼1–2 revolutions per day, are dominated by a primordial component that reflects the formation mechanism of the asteroids. Similarly, the Kuiper Belt has undergone virtually no collisional spin evolution, assuming current densities. Collisions contribute a spin rate of ∼0.01 revolutions per day, thus the observed fast spin rates of KBOs are also primordial in nature.

79 ASTRONOMY AND ASTROPHYSICS↗

Essay: Quantum Sensing with Atomic, Molecular, and Optical Platforms for Fundamental Physics

Atomic, molecular, and optical (AMO) physics has been at the forefront of the development of quantum science while laying the foundation for modern technology. With the growing capabilities of quantum control of many atoms for engineered many-body states and quantum entanglement, a key question emerges: what critical impact will the second quantum revolution with ubiquitous applications of entanglement bring to bear on fundamental physics? In this Essay, we argue that a compelling long-term vision for fundamental physics and novel applications is to harness the rapid development of quantum information science to define and advance the frontiers of measurement physics, with strong potential for fundamental discoveries. As quantum technologies, such as fault-tolerant quantum computing and entangled quantum sensor networks, become much more advanced than today’s realization, we wonder what doors of basic science can these tools unlock. We anticipate that some of the most intriguing and challenging problems, such as quantum aspects of gravity, fundamental symmetries, or new physics beyond the minimal standard model, will be tackled at the emerging quantum measurement frontier. . Published by the American Physical Society 2024

Physics↗

WE-FG-207B-08: Dual-Energy CT Iodine Accuracy Across Vendors and Platforms

Purpose: Although a major benefit of dual-energy CT is its quantitative capabilities, it is critical to understand how results vary by scanner manufacturer and/or model before making clinical patient management decisions. Each manufacturer utilizes a specific dual-energy CT approach; cross-calibration may be required for facilities with more than one dual-energy CT scanner type. Methods: A solid dual-energy quality control phantom (Gammex, Inc.; Appleton, WI) representing a large body cross-section containing three Iodine inserts (2mg/ml, 5mg/ml, 15 mg/ml) was scanned on these CT systems: GE HD-750 (80/140kVp), prototype GE Revolution CT with GSI (80/140kVp), Siemens Flash (80/140kVp and 100/140kVp), and Philips IQon (120kVp and 140kVp). Iodine content was measured in units of concentration (mg/ml) from a single 5mm-thick central image. Three to five acquisitions were performed on each scanner platform in order to compute standard deviation. Scan acquisitions were approximately dose-matched (∼25mGy CTDIvol) and image parameters were as consistent as possible (thickness, kernel, no noise reduction applied). Results: Iodine measurement error ranges were −0.24-0.16 mg/ml for the 2mg/ml insert (−12.0 − 8.0%), −0.28–0.26 mg/ml for the 5mg/ml insert (−5.6 − 5.2%), and −1.16−0.99 mg/ml for the 15mg/ml insert (−7.7 − 6.6%). Standard deviations ranged from 0 to 0.19 mg/ml for the repeated acquisitions from each scanner. The average iodine measurement error and standard deviation across all systems and inserts was −0.21 ± 0.48 mg/ml (−1.5 ± 6.48%). The largest absolute measurement error was found in the 15mg/ml iodine insert. Conclusion: There was generally good agreement in Iodine quantification across 3 dual-energy CT manufacturers and 4 scanner models. This was unexpected given the widely different underlying dual-energy CT mechanisms employed. Future work will include additional scanner platforms, independent verification of the Iodine insert standard concentrations (especially the 15 mg/ml insert), and how much measurement variability can be clinically tolerated. This research has been supported by funds from Dr. William Murphy, Jr., the John S. Dunn, Sr. Distinguished Chair in Diagnostic Imaging at MD Anderson Cancer Center.

60 APPLIED LIFE SCIENCES↗

Blade Load Unsteadiness and Turbulence Statistics in an Actuator-Line Computed Turbine–Turbine Interaction Problem

The objective of this study is to investigate how different volumetric projection techniques used in actuator-line modeling affect the unsteady blade loads and wake turbulence statistics. The two techniques for the body-force projection radius are based on either (i) the grid spacing or (ii) the combination of grid spacing and an equivalent elliptic blade planform. An array of two National Renewable Energy Laboratory 5-MW turbines separated by seven rotor diameters is simulated for 2000s (about rotor 300 revolutions) within a large-eddy simulation (LES) solver of the neutral and moderately convective atmospheric boundary layer (ABL). The statistics of sectional angle of attack (AOA), blade loads, and turbine power histories are quantified. Moreover, the degree of unsteadiness of sectional blade loads in response to atmospheric and wake turbulence is computed via a reduced frequency based on the rate-of-change in sectional AOA. Finally, the goal of this work is to make the wind energy community aware of the uncertainties associated with actuator-line modeling approaches.

17 WIND ENERGY↗

Responsibly Harnessing the Power of AI

Artificial Intelligence (AI) based applications are on the cusp of offering the public and private sectors tools of tremendous potential that will likely transform the world in much the same way that previous technological revolutions have. To harness these tools, a vast and rapidly increasing assortment of ethical AI guidelines and principles are being developed to manage the myriad of risks these tools pose. Documents, frameworks, standards, and regulations have been developed by private industry, research institutions, governments and nongovernmental organizations, international standards bodies and more. This work details representative approaches to ethically developing, managing, and operating current AI technologies. The various approaches are analyzed for commonality, divergence, and implementation strategy to help develop approaches for managing AI tools in the nuclear landscape. This work will support the creation of a common vocabulary and a deeper understanding of the ethical/ responsible AI landscape and advance the considerations required for structured frameworks in the international safeguards domain.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

The challenges of detecting and attributing ocean acidification impacts on marine ecosystems

Abstract A substantial body of research now exists demonstrating sensitivities of marine organisms to ocean acidification (OA) in laboratory settings. However, corresponding in situ observations of marine species or ecosystem changes that can be unequivocally attributed to anthropogenic OA are limited. Challenges remain in detecting and attributing OA effects in nature, in part because multiple environmental changes are co-occurring with OA, all of which have the potential to influence marine ecosystem responses. Furthermore, the change in ocean pH since the industrial revolution is small relative to the natural variability within many systems, making it difficult to detect, and in some cases, has yet to cross physiological thresholds. The small number of studies that clearly document OA impacts in nature cannot be interpreted as a lack of larger-scale attributable impacts at the present time or in the future but highlights the need for innovative research approaches and analyses. We summarize the general findings in four relatively well-studied marine groups (seagrasses, pteropods, oysters, and coral reefs) and integrate overarching themes to highlight the challenges involved in detecting and attributing the effects of OA in natural environments. We then discuss four potential strategies to better evaluate and attribute OA impacts on species and ecosystems. First, we highlight the need for work quantifying the anthropogenic input of CO2 in coastal and open-ocean waters to understand how this increase in CO2 interacts with other physical and chemical factors to drive organismal conditions. Second, understanding OA-induced changes in population-level demography, potentially increased sensitivities in certain life stages, and how these effects scale to ecosystem-level processes (e.g. community metabolism) will improve our ability to attribute impacts to OA among co-varying parameters. Third, there is a great need to understand the potential modulation of OA impacts through the interplay of ecology and evolution (eco–evo dynamics). Lastly, further research efforts designed to detect, quantify, and project the effects of OA on marine organisms and ecosystems utilizing a comparative approach with long-term data sets will also provide critical information for informing the management of marine ecosystems.

Fisheries↗

Standard model physics and the digital quantum revolution: thoughts about the interface

Advances in isolating, controlling and entangling quantum systems are transforming what was once a curious feature of quantum mechanics into a vehicle for disruptive scientific and technological progress. Pursuing the vision articulated by Feynman, a concerted effort across many areas of research and development is introducing prototypical digital quantum devices into the computing ecosystem available to domain scientists. Through interactions with these early quantum devices, the abstract vision of exploring classically-intractable quantum systems is evolving toward becoming a tangible reality. Beyond catalyzing these technological advances, entanglement is enabling parallel progress as a diagnostic for quantum correlations and as an organizational tool, both guiding improved understanding of quantum many-body systems and quantum field theories defining and emerging from the standard model. Here, from the perspective of three domain science theorists, this article compiles thoughts about the interface on entanglement, complexity, and quantum simulation in an effort to contextualize recent NISQ-era progress with the scientific objectives of nuclear and high-energy physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Artificial Intelligence, the Final Piece to the Counterforce Puzzle?

It is widely expected that artificial intelligence (AI) will disrupt and fundamentally transform many aspects of social, economic, and political life over the coming decades. As we are in the early stages of AI adoption in most fields, many discussions of its potential necessarily impact remain vague and superficial, including where national security is concerned. Nevertheless, some scholars have productively explored AI’s impact on the character of warfare, the balance of power among states, and human society itself. This article contributes to this growing body of literature by examining how this new technology might interact with one of the most prominent features of the post-World War II strategic environment: nuclear weapons. Specifically, it asks whether AI-driven improvements to intelligence, surveillance, and reconnaissance (ISR) capabilities, i.e., automated image recognition/computer vision, could enable an effective counterforce capability and thereby imperil nuclear deterrence and weaken first-strike stability. Since the advent of the nuclear age, analysts have been divided over the meaning of nuclear weapons for international politics. Proponents of the “nuclear revolution” argue that nuclear weapons, particularly a secure second-strike capability, which would allow a state to retaliate with nuclear force after suffering a first strike, satisfy a state’s security needs because they present a potential for unacceptable damage that would deter any potential challenger from even considering aggression. In their view, international politics in the shadow of nuclear weapons would be largely peaceful, competition would be relegated to the margins, and nuclear superiority would be meaningless. However, recent research suggests that this may not be the case. In fact, nuclear weapon states have sought to hold at risk the nuclear arsenals of their adversaries throughout the nuclear age. Still, no country has attacked another’s operational nuclear arsenal. That is because the requirements for a disarming strike are considerably higher than for damage limitation or retaliation against nuclear attack. A state trying to disarm its opponent would have to be certain to destroy, or at least disable, all of its adversary’s nuclear weapons. Even one operational nuclear warhead could inflict unacceptable damage in a retaliatory blow. The inability to be certain that a first strike could find and eliminate all enemy nuclear weapons has been the main roadblock for effective counterforce. As the number of battlefield sensors grows and ISR capabilities improve, however, this roadblock is crumbling. Some expect it to be fully overcome with the help of AI.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Enamel nanocrystal misorientation increased with meat-eating and agriculture

Enamel covers teeth, is the hardest tissue in the vertebrate body and has a complex multiscale structure from nanometres to millimetres. The structure comprises thin, long hydroxyapatite (Ca 5 (PO 4 ) 3 OH) nanocrystals, 50–70 nm wide, many micrometres long, parallel and bundled into approximately 5-µm-wide rods. The rods undulate and cross into a microscale ‘decussation pattern’ that toughens enamel by deflecting cracks. However, the crystallographic orientation of enamel nanocrystals is poorly understood. Here we show that the misorientation angle of adjacent nanocrystals varies markedly across 12 primate teeth spanning 9 species, 17.8 million years of evolution and diverse diets. Using a method called Polarization Enabled Large Input of Crystal Angles at the Nanoscale (PELICAN), we compare nanocrystals in the same (pre)molar locations and show that misorientation increases with food hardness in extant and fossil non-human apes and monkeys. We compare misorientation across three major dietary shifts in human evolution: the transition to meat-eating about 2.0–1.5 million years before present, to agriculture (about 12,000 years before present), and the Industrial Revolution (about 250 years before present). We show that over the past 1.6 million years, in the human lineage misorientation increased with time, especially when meat and stone-ground grains were introduced into human diets, but not with the Industrial Revolution. Thus, besides macro-changes, teeth adapted to dietary change at the nanoscale and crystallographically. This observation suggests that misorientation may contribute to enamel’s resilience; thus, bioinspired materials may consider small misorientation angles for added resilience.

biomaterials↗