Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BLUE LIGHT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High-efficiency second harmonic generation of blue light on thin-film lithium niobate

The strength of interactions between photons in a χ (2) nonlinear optical waveguide increases at shorter wavelengths. These larger interactions enable coherent spectral translation and light generation at a lower power, over a broader bandwidth, and in a smaller device: all of which open the door to new technologies spanning fields from classical to quantum optics. Stronger interactions may also grant access to new regimes of quantum optics to be explored at the few-photon level. One promising platform that could enable these advances is thin-film lithium niobate (TFLN), due to its broad optical transparency window and possibility for quasi-phase matching and dispersion engineering. In this Letter, we demonstrate second harmonic generation of blue light on an integrated thin-film lithium niobate waveguide and observe a conversion efficiency of η 0 = 33, 000%/W- cm 2 , significantly exceeding previous demonstrations.

Park, Taewon↗
DOE OSTI2016

Photocurrent response of B{sub 12}As{sub 2} crystals to blue light, and its temperature- dependent electrical characterizations

With the global shortage of {sup 3}He gas, researchers worldwide are looking for alternative materials for detecting neutrons. Among the candidate materials, semiconductors are attractive because of their light weight and ease in handling. Currently, we are looking into the suitability of boron arsenide (B{sub 12}As{sub 2}) for this specific application. As the first step in evaluating the material qualitatively, the photo-response of B{sub 12}As{sub 2} bulk crystals to light with different wavelengths was examined. The crystals showed photocurrent response to a band of 407- and 470- nm blue light. The maximum measured photoresponsivity and the photocurrent density at 0.7 V for 470 nm blue light at room temperature were 0.25 A ⋅ W{sup −1} and 2.47 mA ⋅ cm{sup −2}, respectively. In addition to photo current measurements, the electrical properties as a function of temperature (range: 50-320 K) were measured. Reliable data were obtained for the low-temperature I-V characteristics, the temperature dependence of dark current and its density, and the resistivity variations with temperature in B{sub 12}As{sub 2} bulk crystals. The experiments showed an exponential dependence on temperature for the dark current, current density, and resistivity; these three electrical parameters, respectively, had a variation of a few nA to μA, 1-100 μA ⋅ cm{sup −2} and 7.6x10{sup 5}-7.7x10{sup 3} Ω ⋅ cm, for temperature increasing from 50 K to 320 K. The results from this study reported the first photoresponse and demonstrated that B{sub 12}As{sub 2} is a potential candidate for thermal-neutron detectors.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The microbicidal potential of visible blue light in clinical medicine and public health

Visible blue light of wavelengths in the 400–470 nm range has been observed to have microbicidal properties. A widely accepted hypothesis for the mechanism of microbial inactivation by visible blue light is that the light causes photoexcitation of either endogenous (present within the microbe) or, exogenous (present in the biological medium surrounding the microbe) photosensitizers such as porphyrins and flavins, which leads to the release of reactive oxygen species that subsequently manifests microbicidal activity. Some of the factors that have been observed to be associated with enhanced microbicidal action include increased duration of exposure, and either pre- or co-treatment with quinine hydrochloride. In case of bacteria, repetitive exposure to the blue light shows no significant evidence of resistance development. Additionally, visible blue light has exhibited the ability to inactivate fungal and viral pathogens and, multidrug-resistant bacteria as well as bacterial biofilms. Visible blue light has demonstrated efficacy in eliminating foodborne pathogens found on food surfaces and exposed surfaces in the food processing environment as well as in the decontamination of surfaces in the clinical environment to minimize the spread of nosocomial infections. We conclude from reviewing existing literature on the application of the blue light in clinical medicine and public health settings that this microbicidal light is emerging as a safer alternative to conventional ultraviolet light-based technologies in multiple settings. However, further comprehensive studies and thorough understanding of the mechanism of microbicidal action of this light in different scenarios is warranted to determine its place in human health and disease.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Dimer Asymmetry and Light Activation Mechanism in Brucella Blue-Light Sensor Histidine Kinase

The ability to sense and respond to environmental cues is essential for adaptation and survival in living organisms. In bacteria, this process is accomplished by multidomain sensor histidine kinases that undergo autophosphorylation in response to specific stimuli, thereby triggering downstream signaling cascades. However, the molecular mechanism of allosteric activation is not fully understood in these important sensor proteins. Here, we report the full-length crystal structure of a blue light photoreceptor LOV histidine kinase (LOV-HK) involved in light-dependent virulence modulation in the pathogenic bacterium Brucella abortus. Joint analyses of dark and light structures determined in different signaling states have shown that LOV-HK transitions from a symmetric dark structure to a highly asymmetric light state. The initial local and subtle structural signal originated in the chromophore-binding LOV domain alters the dimer asymmetry via a coiled-coil rotary switch and helical bending in the helical spine. These amplified structural changes result in enhanced conformational flexibility and large-scale rearrangements that facilitate the phosphoryl transfer reaction in the HK domain.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2014

White luminescence from CdS nanocrystals under the blue light excitation

Trap-rich CdS nanocrystals were synthesized by employing CdSt{sub 2} and sulfur as precursors via thermal decomposition. Furthermore, X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), absorption and photoluminescence (PL) spectra were used to characterize structure, morphology and luminescence properties of CdS nanocrystals (NCs). CdS NCs have a broad emission across 500–700 nm under the excitation of blue light with 460 nm, consequently, white light can be produced by mixing broad emission from CdS NCs excited by blue light, with the remaining blue light. In addition, the broad emission generation is closely and inseparably related to surface defects. Moreover, LaMer model was used to explain the phenomenon that the intensity of the trap emission gradually decreases as the reaction time increases in contrast with that of the band-edge emission. - Graphical abstract: Trap-rich CdS nanocrystals were synthesized. Furthermore, white light is produced by mixing broad emission across 500–700 nm from CdS NCs excited by blue light, in combination with the remaining blue light. - Highlights: • Trap-rich CdS nanocrystals were synthesized. • CdS NCs have a broad emission across 500–700 nm under the excitation of blue light. • White light can be produced by mixing broad emission with the remaining blue light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Blue light emitting SrSn(OH){sub 6} nano-rods doped with lanthanide ions (Eu{sup 3+}, Tb{sup 3+} and Dy{sup 3+})

Graphical abstract: Display Omitted Highlights: ► Room temperature synthesis of blue light emitting SrSn(OH){sub 6} nano-rods. ► Blue light emission originates from the recombination of self trapped excitons. ► There exists energy transfer from host to lanthanide ions in SrSn(OH){sub 6}:Ln nano-rods. ► Solubility of Eu{sup 3+} ions in SrSn(OH){sub 6} nano-rods is around 1.5 at%. -- Abstract: Blue light emitting SrSn(OH){sub 6} nano-rods were prepared in aqueous medium at room temperature. Presence of lanthanide ions in reaction medium during synthesis of nano-rods, leads to significant changes in the morphology of the nano-rods. Based on luminescence studies emission in the blue region from SrSn(OH){sub 6} nano-rods has been attributed to radiative recombination of self trapped excitons in the lattice. SrSn(OH){sub 6} nano-rods were doped with lanthanide ions like Eu{sup 3+}, Tb{sup 3+} and Dy{sup 3+} and their luminescence studies revealed that there exists energy transfer from host to lanthanide ions. From the luminescence studies on Eu{sup 3+} doped samples, it is confirmed that up to 1.5 at%, Eu{sup 3+} ions get incorporated at Sr{sup 2+} site in SrSn(OH){sub 6} lattice and beyond which a separate Eu{sup 3+} containing phase is formed. Part of the europium ions also exists as Eu{sup 2+} species in the lattice as confirmed by electron paramagnetic resonance (EPR) studies.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Structure and photoluminescence properties of nanocrystal Eu{sup 3+}-doped gadolinium tungsten red emitting phosphors excited by blue light

Highlights: ► We get a series of Eu{sup 3+} doped tungstate phosphors with a wide range doping level. ► Different doping level leads to different crystal structures of final productions. ► Gd{sub 6}WO{sub 12}-like with a tetragonal lattice structure grows at low doping level. ► Gd{sub 2}WO{sub 6}-like with a monoclinic lattice structure grows at high doping level. ► The doping level at 40 mol% Eu{sup 3+} excited by blue light shows excellent red emission. -- Abstract: A co-precipitation reaction was used to prepare nanocrystal Gd{sub 6}WO{sub 12}:Eu{sup 3+} and Gd{sub 2}WO{sub 6}:Eu{sup 3+} red emitting phosphor powders with different Eu{sup 3+} doping levels. It is found that under the same preparation conditions, different doping level leads to different crystal structures; Gd{sub 6}WO{sub 12}-like with a tetragonal lattice structure tends to be synthesized at low doping level (10–40 mol%) yet Gd{sub 2}WO{sub 6}-like with a monoclinic lattice structure easily to grow at high doping level (60–80 mol%). The strong red emission of {sup 5}D{sub 0} → {sup 7}F{sub 2} transitions at 620 nm was observed for all powders under either near ultraviolet or blue light excited and the most intense emission was obtained at the concentration of 40 mol%. This kind of powders might find their promising application to compensate the white LEDs for the lack of red light component and to improve rendering index.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Near-field terahertz nonlinear optics with blue light

Abstract The coupling of terahertz optical techniques to scattering-type scanning near-field microscopy (s-SNOM) has recently emerged as a valuable new paradigm for probing the properties of semiconductors and other materials on the nanoscale. Researchers have demonstrated a family of related techniques, including terahertz nanoscopy (elastic scattering, based on linear optics), time-resolved methods, and nanoscale terahertz emission spectroscopy. However, as with nearly all examples of s-SNOM since the technique’s inception in the mid-1990s, the wavelength of the optical source coupled to the near-field tip is long, usually at energies of 2.5 eV or less. Challenges in coupling of shorter wavelengths (i.e., blue light) to the nanotip has greatly inhibited the study of nanoscale phenomena in wide bandgap materials such as Si and GaN. Here, we describe the first experimental demonstration of s-SNOM using blue light. With femtosecond pulses at 410 nm, we generate terahertz pulses directly from bulk silicon, spatially resolved with nanoscale resolution, and show that these signals provide spectroscopic information that cannot be obtained using near-infrared excitation. We develop a new theoretical framework to account for this nonlinear interaction, which enables accurate extraction of material parameters. This work establishes a new realm of possibilities for the study of technologically relevant wide-bandgap materials using s-SNOM methods.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Cesium Lead Halide Perovskite Nanocrystals Assembled in Metal–Organic Frameworks for Stable Blue Light Emitting Diodes

All inorganic cesium lead trihalide nanocrystals are promising light emitters for bright light emitting diodes (LEDs). Here we demonstrate CsPb(BrCl) 1.5 nanocrystals in metal-organic frameworks (MOF) thin films to achieve bright and stable blue LEDs. The lead metal nodes in the MOF thin film react with Cs-halide salts, resulting in 10~20 nm nanocrystals. This is revealed by X-ray scattering and transmission electron microscopy. Employing the CsPbX 3 - MOF thin films as emission layers, bright deep blue and sky-blue LEDs are demonstrated that emit at 452 nm and 476 nm respectively. The maximum external quantum efficiencies of these devices are 0.72% for deep blue LEDs and 5.6% for sky blue LEDs. More importantly, the device can maintain 50% of its original electroluminescence (T 50 ) for 2.23 hours when driving at 4.2V. Detailed optical spectroscopy and time-of-flight secondary ion mass spectroscopy suggest that the ion migration can be suppressed that maintains the emission brightness and spectra. Our study provides a new route for fabricating stable blue light emitting diodes with all-inorganic perovskite nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Phototropin connects blue light perception to starch metabolism in green algae

Abstract In photosynthetic organisms, light acts as an environmental signal to control their development and physiology, as well as energy source to drive the conversion of CO 2 into carbohydrates used for growth or storage. The main storage carbohydrate in green algae is starch, which accumulates during the day and is broken down at night to meet cellular energy demands. The signaling role of light quality in the regulation of starch accumulation remains unexplored. Here, we identify PHOTOTROPIN-MEDIATED SIGNALING KINASE 1 (PMSK1) as a key regulator of starch metabolism inChlamydomonas reinhardtii. In its phosphorylated form (PMSK1-P), it activates GLYCERALDEHYDE-3-PHOSPHATE DEHYDROGENASE (GAP1), promoting starch biosynthesis. We show that blue light, perceived by PHOTOTROPIN, induces PMSK1 dephosphorylation that in turn represses GAP1 mRNA levels and reduces starch accumulation. These findings reveal a previously uncharacterized blue light-mediated signaling pathway that advances our understanding of photoreceptor-controlled carbon metabolism in microalgae.

Science & Technology - Other Topics↗
DOE OSTI2021

Efficient and tunable blue light generation using lithium niobate nonlinear photonics

Thin-film lithium niobate (LN) has recently emerged as a playground for chip-scale nonlinear optics and leads to efficient frequency conversions from near-infrared to near-visible bands. For many nonlinear and quantum photonics applications, it is desirable to operate deep into the visible band within LN's transparency window. However, the strong material dispersion at short wavelengths makes phase-matching difficult, necessitating sub-micrometer scale control of domain structures for efficient phase-matching. Here, we report the operation of thin film LN in the blue wavelength and high fidelity poling of the thin-film LN waveguide to this regime. As a result, quasi-phase matching is realized between IR (871 nm) and blue (435.5 nm) wavelengths in a straight waveguide and prompts strong blue light generation with a conversion efficiency (1040% ± 140%/W). This blue second harmonic generator exhibits stable temperature tunability, which is important for applications that require precise frequency alignment, such as atomic clocks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Effect of Solvent on Fluorescence Emission from Polyethylene Glycol-Coated Graphene Quantum Dots under Blue Light Illumination

To explore aggregate-induced emission (AIE) properties, this study adopts a one-pot hydrothermal route for synthesizing polyethylene glycol (PEG)-coated graphene quantum dot (GQD) clusters, enabling the emission of highly intense photoluminescence under blue light illumination. The hydrothermal synthesis was performed at 300 °C using o-phenylenediamine as the nitrogen and carbon sources in the presence of PEG. Three different solvents, propylene glycol methyl ether acetate (PGMEA), ethanol, and water, were used for dispersing the PEG-coated GQDs, where extremely high fluorescent emission was achieved at 530–550 nm. It was shown that the quantum yield (QY) of PEG-coated GQD suspensions is strongly dependent on the solvent type. The pristine GQD suspension tends to be quenched (i.e., QY: ~1%) when dispersed in PGMEA (aggregation-caused quenching). However, coating GQD nanoparticles with polyethylene glycol results in substantial enhancement of the quantum yield. When investigating the photoluminescence emission from PEG-coated GQD clusters, the surface tension of the solvents was within the range of from 26.9 to 46.0 mN/m. This critical index can be tuned for assessing the transition point needed to activate the AIE mechanism which ultimately boosts the fluorescence intensity. The one-pot hydrothermal route established in this study can be adopted to engineer PEG-coated GQD clusters with solid-state PL emission capabilities, which are needed for next-generation optical, bio-sensing, and energy storage/conversion devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Complete Inactivation of Blood Borne Pathogen Trypanosoma cruzi in Stored Human Platelet Concentrates and Plasma Treated With 405 nm Violet-Blue Light

The introduction of pathogen reduction technologies (PRTs) to inactivate bacteria, viruses and parasites in donated blood components stored for transfusion adds to the existing arsenal toward reducing the risk of transfusion-transmitted infectious diseases (TTIDs). We have previously demonstrated that 405 nm violet-blue light effectively reduces blood-borne bacteria in stored human plasma and platelet concentrates. In this report, we investigated the microbicidal effect of 405 nm light on one important bloodborne parasite Trypanosoma cruzi that causes Chagas disease in humans. Our results demonstrated that a light irradiance at 15 mWcm -2 for 5 h, equivalent to 270 Jcm -2 , effectively inactivated T. cruzi by over 9.0 Log 10 , in plasma and platelets that were evaluated by a MK2 cell infectivity assay. Giemsa stained T. cruzi infected MK2 cells showed that the light-treated parasites in plasma and platelets were deficient in infecting MK2 cells and did not differentiate further into intracellular amastigotes unlike the untreated parasites. The light-treated and untreated parasite samples were then evaluated for any residual infectivity by injecting the treated parasites into Swiss Webster mice, which did not develop infection even after the animals were immunosuppressed, further demonstrating that the light treatment was completely effective for inactivation of the parasite; the light-treated platelets had similar in vitro metabolic and biochemical indices to that of untreated platelets. Overall, these results provide a proof of concept toward developing 405 nm light treatment as a pathogen reduction technology (PRT) to enhance the safety of stored human plasma and platelet concentrates from bloodborne T. cruzi, which causes Chagas disease.

405 nm light↗
DOE OSTI2016

Gap state related blue light emitting boron-carbon core shell structures

Boron-carbon core shell structures have been synthesized by solvo-thermal synthesis route. The synthesized material is highly pure. X-ray diffraction analysis confirms the reduction of reactants in to boron and carbon. Scanning Electron Microscopy (SEM) analysis showed that the shell is uniform with average thickness of 340 nm. Photo luminescence studies showed that the material is blue light emitting with CIE color coordinates: x=0.16085, y=0.07554.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

405 nm violet-blue light inactivates hepatitis C cell culture virus (HCVcc) in ex vivo human platelet concentrates and plasma

Abstract Added safety measures coupled with the development and use of pathogen reduction technologies (PRT) significantly reduces the risk of transfusion-transmitted infections (TTIs) from blood products. Current approved PRTs utilize chemical and/or UV-light based inactivation methods. While the effectiveness of these PRTs in reducing pathogens are well documented, these can cause tolerable yet unintended consequences on the quality and efficacy of the transfusion products. As an alternative to UV-based approaches, we have previously demonstrated that 405 nm violet-blue light exposure successfully inactivates a variety of pathogens, including bacteria, parasites, and viruses, in both platelet concentrates (PCs) and plasma. Herein, we show that 405 nm light treatment effectively inactivates hepatitis C cell culture virus (HCVcc) by up to ~ 3.8 log10 in small volumes of a variety of matrices, such as cell culture media, PBS, plasma, and PCs with 27 J/cm 2 of light exposure, and total inactivation of HCVcc after 162 J/cm 2 light exposure. Furthermore, we demonstrate that carry-over of media supplemented with fetal bovine serum enhances the production of reactive oxygen species (ROS), providing mechanistic insights to 405 nm light-mediated viral inactivation. Overall, 405 nm light successfully inactivates HCVcc, further strengthening this method as a novel PRT for platelets and plasma.

Science & Technology - Other Topics↗
DOE OSTI2015

NIR to blue light upconversion in Tm{sup 3+}/Yb{sup 3+} codoped BaTiO{sub 3} tellurite glass

Upconversion is an interesting optical property, generally shown by rare-earth doped materials. This unusual optical behavior shown by these rare-earths doped materials are due to their peculiar atomic configuration and electronic transitions. Here, the Tm{sup 3+}-Yb{sup 3+} codoped BaTiO{sub 3} glass with TeO{sub 2} as former has been prepared by conventional melt and quench technique and the upconversion property has been investigated with the help of near infrared (NIR) to Visible UC study. The generation of the visible UC bands around ∼ 476 nm, ∼ 653 nm, ∼ 702 nm and one NIR UC band at ∼795 nm are assigned due to the {sup 1}G{sub 4}→ {sup 3}H{sub 6}, {sup 1}G{sub 4}→ {sup 3}F{sub 4}, {sup 3}F{sub 2}→ {sup 3}H{sub 6} and {sup 3}H{sub 4}→ {sup 3}H{sub 6} transitions respectively. The generations of these upconversion bands have been discussed in detail with the help of energy level diagram. The colour coordinates corresponding to the prepared material have been shown with the help of CIE chromaticity diagram. These glasses can be very appropriately used in the fabrication of solid state laser and as NIR to blue light upconverter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗