FLUXNET-CH4 US-Bes Barrow-Bes (Biocomplexity Experiment South tower)
This is the FLUXNET-CH4 version of the carbon flux data for the site US-Bes Barrow-Bes (Biocomplexity Experiment South tower).
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This is the FLUXNET-CH4 version of the carbon flux data for the site US-Bes Barrow-Bes (Biocomplexity Experiment South tower).
Each new generation of synchrotron radiation sources has delivered an increase in average brightness 2 to 3 orders of magnitude over the previous generation. The next evolution toward diffraction-limited storage rings will deliver another 3 orders of magnitude increase. For ultrafast experiments, free electron lasers (FELs) deliver 10 orders of magnitude higher peak brightness than storage rings. Our ability to utilize these ultrabright sources, however, is limited by our ability to focus, monochromate, and manipulate these beams with X-ray optics. X-ray optics technology unfortunately lags behind source technology and limits our ability to maximally utilize even today’s X-ray sources. With ever more powerful X-ray sources on the horizon, a new generation of X-ray optics must be developed that will allow us to fully utilize these beams of unprecedented brightness. The increasing brightness of X-ray sources will enable a new generation of measurements that could have revolutionary impact across a broad area of science, if optical systems necessary for transporting and analyzing X-rays can be perfected. The high coherent flux will facilitate new science utilizing techniques in imaging, dynamics, and ultrahigh-resolution spectroscopy. For example, zone-plate-based hard X-ray microscopes are presently used to look deeply into materials, but today’s resolution and contrast are restricted by limitations of the current lithography used to manufacture nanodiffractive optics. The large penetration length, combined in principle with very high spatial resolution, is an ideal probe of hierarchically ordered mesoscale materials, if zone-plate focusing systems can be improved. Resonant inelastic X-ray scattering (RIXS) probes a wide range of excitations in materials, from charge-transfer processes to the very soft excitations that cause the collective phenomena in correlated electronic systems. However, although RIXS can probe high-energy excitations, the most exciting and potentially revolutionary science involves soft excitations such as magnons and phonons; in general, these are well below the resolution that can be probed by today’s optical systems. The study of these low-energy excitations will only move forward if advances are made in high-resolution gratings for the soft X-ray energy region, and higher-resolution crystal analyzers for the hard X-ray region. In almost all the forefront areas of X-ray science today, the main limitation is our ability to focus, monochromate, and manipulate X-rays at the level required for these advanced measurements. To address these issues, the U.S. Department of Energy (DOE) Office of Basic Energy Sciences (BES) sponsored a workshop, X-ray Optics for BES Light Source Facilities, which was held March 27–29, 2013, near Washington, D.C. The workshop addressed a wide range of technical and organizational issues. Eleven working groups were formed in advance of the meeting and sought over several months to define the most pressing problems and emerging opportunities and to propose the best routes forward for a focused R&D program to solve these problems. The workshop participants identified eight principal research directions (PRDs), as follows: Development of advanced grating lithography and manufacturing for high-energy resolution techniques such as soft X-ray inelastic scattering. Development of higher-precision mirrors for brightness preservation through the use of advanced metrology in manufacturing, improvements in manufacturing techniques, and in mechanical mounting and cooling. Development of higher-accuracy optical metrology that can be used in manufacturing, verification, and testing of optomechanical systems, as well as at wavelength metrology that can be used for quantification of individual optics and alignment and testing of beamlines. Development of an integrated optical modeling and design framework that is designed and maintained specifically for X-ray optics. Development of nanolithographic techniques for improved spatial resolution and efficiency of zone plates. Development of large, perfect single crystals of materials other than silicon for use as beam splitters, seeding monochromators, and high-resolution analyzers. Development of improved thin-film deposition methods for fabrication of multilayer Laue lenses and high-spectral-resolution multilayer gratings. Development of supports, actuator technologies, algorithms, and controls to provide fully integrated and robust adaptive X-ray optic systems. Development of fabrication processes for refractive lenses in materials other than silicon. The workshop participants also addressed two important nontechnical areas: our relationship with industry and organization of optics within the light source facilities. Optimization of activities within these two areas could have an important effect on the effectiveness and efficiency of our overall endeavor. These are crosscutting managerial issues that we identified as areas that needed further in-depth study, but they need to be coordinated above the individual facilities. Finally, an issue that cuts across many of the optics improvements listed above is routine access to beamlines that ideally are fully dedicated to optics research and/or development. The success of the BES X-ray user facilities in serving a rapidly increasing user community has led to a squeezing of beam time for vital instrumentation activities. Dedicated development beamlines could be shared with other R&D activities, such as detector programs and novel instrument development. In summary, to meet the challenges of providing the highest-quality X-ray beams for users and to fully utilize the high-brightness sources of today and those that are on the horizon, it will be critical to make strategic investments in X-ray optics R&D. This report can provide guidance and direction for effective use of investments in the field of X-ray optics and potential approaches to develop a better-coordinated program of X-ray optics development within the suite of BES synchrotron radiation facilities. Due to the importance and complexity of the field, the need for tight coordination between BES light source facilities and with industry, as well as the rapid evolution of light source capabilities, the workshop participants recommend holding similar workshops at least biannually.
We report the results from self-consistent calculations of electronic, transport, and bulk properties of beryllium sulfide (BeS) in the zinc-blende phase, and employed an ab-initio local density approximation (LDA) potential and the linear combination of atomic orbitals (LCAO). We obtained the ground state properties of zb-BeS with the Bagayoko, Zhao, and Williams (BZW) computational method, as enhanced by Ekuma and Franklin (BZW-EF). Our findings include the electronic energy bands, the total (DOS) and partial (pDOS) densities of states, electron and hole effective masses, the equilibrium lattice constant, and the bulk modulus. The calculated band structure clearly shows that zb-BeS has an indirect energy band gap of 5.436 eV, from Γ to a point between Γ and X, for an experimental lattice constant of 4.863 Å. This is in excellent agreement with the experiment, unlike the findings of more than 15 previous density functional theory (DFT) calculations that did not perform the generalized minimization of the energy functional, required by the second DFT theorem, which is inherent to the implementation of our BZW-EF method.
In last 10 years, 0{sup ++} resonances have been observed and studied at BES in many processes, such as J/{psi}{yields}{gamma}{pi}{sup +}{pi}{sup -}{pi}{sup +}{pi}{sup -}, {gamma}{pi}{sup +}{pi}{sup -}, {gamma}{pi}{sup 0}{pi}{sup 0}, {gamma}K{sup +}K{sup -}, {gamma}K{sub S}K{sub S}, {gamma}{omega}{phi}, {omega}{pi}{sup +}{pi}{sup -}, {omega}K{sup +}K{sup -}, {phi}{pi}{sup +}{pi}{sup -}, {phi}K{sup +}K{sup -}, {psi}(2S){yields}J/{psi}{pi}{sup +}{pi}{sup -}, {chi}{sub c0}{yields}{pi}{sup +}{pi}{sup -}K{sup +}K{sup -}, {pi}{sup +}{pi}{sup -}{pi}{sup +}{pi}{sup -} etc. The results on 0{sup ++} resonances observed at BES are reviewed.
The BES-III experiment in Beijing takes data in tau-charm domain since 2009. For the moment the world largest samples of J /ψ, ψ(3686), ψ(3770) and ψ(4040) data have been collected. The current status of the BES-III experiment is presented. The overview of recent results on light hadron, charmonium and charm physics is given.
To identify specific Priority Research Opportunities (PROs) for artificial intelligence and machine learning (AI/ML) at the US Department of Energy’s scientific user facilities, the Office of Basic Energy Sciences (BES) convened a roundtable of facility experts encompassing the fields of physics, chemistry, materials synthesis science, computational science, detector and accelerator technology, theory, modeling, simulation, and atomic-scale characterization techniques. The roundtable met on October 22–23, 2019, to identify coordinated, long-term AI/ML research efforts that will drive major advances in neutron, photon, and nanoscale sciences. This report describes the four PROs identified at the roundtable: PRO 1 on how AI/ML can extract high-value information from the large datasets; PRO 2 on how AI/ML can use such information in real time to maximize the facilities’ scientific output; PRO 3 on using AI/ML virtual laboratories (i.e., computational models of experimental facilities) to aid the facilities and user community in design and control of machine parameters and the design and execution of experiments, including training AI/ML models for PROs 1 and 2; and PRO 4 on how a shared scientific data infrastructure can provide tools to assemble and analyze the totality of data coming from user facilities. A section of the end of the report provides a summary on computer science and mathematics that highlights where enhanced AI/ML capabilities could be particularly impactful for BES user facilities.
BeS is Zincblende, Sphalerite structured and crystallizes in the cubic F-43m space group. The structure is three-dimensional. Be2+ is bonded to four equivalent S2- atoms to form corner-sharing BeS4 tetrahedra. All Be–S bond lengths are 2.11 Å. S2- is bonded to four equivalent Be2+ atoms to form corner-sharing SBe4 tetrahedra.
In the paper, we discuss the development of the multigap resistive plate chamber time-of-flight (TOF) technology and the production of the solenoidal tracker at RHIC (STAR) TOF detector in China at the beginning of the twenty-first century. Subsequently, recent experimental results from the first beam energy scan program (BES-I) at the Relativistic Heavy Ion Collider (RHIC) pertaining to measurements of collectivity, chirality, criticality, global polarization, strangeness, heavy flavor, dilepton and light nuclei productions are reviewed.
The second phase of the Beam Energy Scan at RHIC, BES-II, is scheduled to start in 2019 and will explore with precision measurements the high baryon density region of the QCD phase diagram. The detector upgrades will enhance some of the key measurements by extending STAR’s kinematical reach. Examples are the kurtosis of net-protons, which could pinpoint the position of a critical point. The upgrades currently under way comprise: the replacement of the inner TPC sectors, the Event Plane Detector and the end-cap TOF. Building on these upgrades STAR is planning to further enhance its detector capabilities by installing a Forward Calorimeter System integrating an electromagnetic and hadronic calorimeter and a Forward Tracking System combining 3 Silicon mini-strip disks and 4 Small-Strip Thin Gap Chamber (sTGC) wheels. The forward upgrade is motivated by studying the initial state of nucleons and nuclei and the exploration of cold QCD physics in the very high and low regions of x. This proceeding will highlight these upgrades and some of their selected physics opportunities.
The status of the BEPC-II e{sup +}e{sup -} collider and the new BES-III detector is reviewed.
In spring 2009 BES III has taken its first large data sample on the {psi}(2S) resonance. More than 1{center_dot}10{sup 8} {psi}(2S) decays have been recorded. First results on the analyses {chi}{sub cJ{yields}{pi}}{sup 0{pi}0}, {chi}{sub cj{yields}{eta}{eta}} and {chi}{sub cj{yields}{phi}{phi}} are presented. The decay mode {chi}{sub c1{yields}{phi}{phi}} has been observed for the first time. The results presented in this document are preliminary.
Abstract. The primary mission of user facilities operated by Basic Energy Sciences under the Department of Energy is to produce data for users in support of open science and basic research [1]. We trace back almost 30 years of history across selected user facilities illustrating the evolution of facility data management practices and how these practices have related to performing scientific research. The facilities cover multiple techniques such as X-ray and neutron scattering, imaging and tomography sciences. Over time, detector and data acquisition technologies have dramatically increased the ability to produce prolific volumes of data challenging the traditional paradigm of users taking data home upon completion of their experiments to process and publish their results. During this time, computing capacity has also increased dramatically, though the size of the data has grown significantly faster than the capacity of one’s laptop to manage and process this new facility produced data. Trends indicate that this will continue to be the case for yet some time. Thus users face a quandary for how to manage today’s data complexity and size as these may exceed the computing resources users have available to themselves. This same quandary can also stifle collaboration and sharing. Realizing this, some facilities are already providing web portal access to data and computing thereby providing users access to resources they need [2]. Portal based computing is now driving researchers to think about how to use the data collected at multiple facilities in an integrated way to perform their research, and also how to collaborate and share data. In the future, inter-facility data management systems will enable next tier cross-instrument-cross facility scientific research fuelled by smart applications residing upon user computer resources. We can learn from the medical imaging community that has been working since the early 1990’s to integrate data from across multiple modalities to achieve better diagnoses [3] – similarly, data fusion across BES facilities will lead to new scientific discoveries.
With the assumption that the X(1835) and {eta}(1760) recently observed by the BES Collaboration are the 3{sup 1}S{sub 0} meson states, the strong decays of these two states are investigated in the {sup 3}P{sub 0} decay model. We find that the predicted total widths of the X(1835) and {eta}(1760) can be reasonably reproduced with the X(18350)-{eta}(1760) mixing angle lying on the range from -0.26 to +0.55 radians. Further, the mixing angle of the X(1835) and {eta}(1760) is phenomenologically determined to be about -0.24 radians in the presence of the {pi}(1800), K(1830), {eta}(1760), and X(1835) belonging to the 3{sup 1}S{sub 0} meson nonet. Our estimated mixing angle can naturally account for the widths of the X(1835) and {eta}(1760), which shows that the assignment of the X(1835) and {eta}(1760), together the {pi}(1800) and K(1830) as the 3{sup 1}S{sub 0} qq members, seems reasonable.
In the framework of the {sup 3}P{sub 0} meson decay model, the strong decays of the 3{sup 1}S{sub 0} and 4{sup 1}S{sub 0} ss states are investigated. It is found that in the presence of the initial state mass being 2.24 GeV, the total widths of the 3{sup 1}S{sub 0} and 4{sup 1}S{sub 0} ss states are about 438 MeV and 125 MeV, respectively. Also, when the initial state mass varies from 2220 to 2400 MeV, the total width of the 4{sup 1}S{sub 0} ss state varies from about 100 to 132 MeV, while the total width of the 3{sup 1}S{sub 0} ss state varies from about 400 to 594 MeV. A comparison of the predicted widths and the experimental result of (0.19{+-}0.03{sub -0.06}{sup +0.04}) GeV, the width of the {eta}(2225) with a mass of (2.24{sub -0.02-0.02}{sup +0.03+0.03}) GeV recently observed by the BES Collaboration in the radiative decay J/{psi}{yields}{gamma}{phi}{phi}{yields}{gamma}K{sup +}K{sup -}K{sub S}{sup 0}K{sub L}{sup 0}, suggests that it would be very difficult to identify the {eta}(2225) as the 3{sup 1}S{sub 0} ss state, and the {eta}(2225) seams a good candidate for the 4{sup 1}S{sub 0} ss state.
In this work, we discuss the contribution of the mesonic loops to the decay rates of {chi}{sub c1{yields}{phi}{phi}}, {omega}{omega}, which are suppressed by the helicity selection rules and {chi}{sub c1{yields}{phi}{omega}}, which is a double-Okubo-Zweig-Iizuka forbidden process. We find that the mesonic loop effects naturally explain the clear signals of {chi}{sub c1{yields}{phi}{phi}}, {omega}{omega} decay modes observed by the BES Collaboration. Moreover, we investigate the effects of the {omega}-{phi} mixing, which may result in the order of magnitude of the branching ratio BR({chi}{sub c1{yields}{omega}{phi}}) being 10{sup -7}. Thus, we are waiting for the accurate measurements of the BR({chi}{sub c1{yields}{omega}{omega}}), BR({chi}{sub c1{yields}{phi}{phi}}), and BR({chi}{sub c1{yields}{omega}{phi}}), which may be very helpful for testing the long-distant contribution and the {omega}-{phi} mixing in {chi}{sub c1{yields}{phi}{phi}}, {omega}{omega}, {omega}{phi} decays.
Building sector energy consumption represents a significant fraction of the overall energy consumption in urban communities. While there has been increasing focus on the development of smart environments to support energy savings in urban commercial buildings, the development of smart environments for the residential sector has been less common. Instead, urban residential energy-saving efforts have focused on improving a building's physical infrastructure, introducing energy-saving appliances, and motivating residents to adopt energy conservation practices. Herein this paper illustrates that creating an affinity between a building resident's thermal preferences and a building apartment's unregulated thermal environment represents an alternative means of generating an energy-efficient environment for multi-family, residential buildings. Two years of 15-min interval summer data, obtained from smart cyber-physical systems installed in 310 apartments across two New York City buildings, is used to develop data-enabled (D-E) models of resident thermal preference and unregulated apartment temperatures. Both of these models use a linear mixed-effects approach. The alignment of optimal resident-apartment pairs is then formulated as an integer-programming problem to explore the building energy saving (BES) potential associated with minimizing the difference between unregulated apartment temperature and the residents' thermal preference based on summer cooling loads. The work shows that the energy saving potential vary with a building's physical characteristics as well as the variation in residents' thermal preferences. The work further demonstrates that both the unregulated temperature and the resident's preferred temperature in a given apartment are not only affected by outside temperature and external relative humidity, but also strongly affected by the apartment's geographic orientation. For the specific buildings considered, up to 28% cooling energy saving is possible with full alignment. The paper provides all building monitoring data as an open source data set.
On February 2, 2015 the Offices of High Energy Physics (HEP) and Basic Energy Sciences (BES) convened a Round Table discussion among a group of physicists on ‘Common Problems in Condensed Matter and High Energy Physics’. This was motivated by the realization that both fields deal with quantum many body problems, share many of the same challenges, use quantum field theoretical approaches and have productively interacted in the past. The meeting brought together physicists with intersecting interests to explore recent developments and identify possible areas of collaboration.... Several topics were identified as offering great opportunity for discovery and advancement in both condensed matter physics and particle physics research. These included topological phases of matter, the use of entanglement as a tool to study nontrivial quantum systems in condensed matter and gravity, the gauge-gravity duality, non-Fermi liquids, the interplay of transport and anomalies, and strongly interacting disordered systems. Many of the condensed matter problems are realizable in laboratory experiments, where new methods beyond the usual quasi-particle approximation are needed to explain the observed exotic and anomalous results. Tools and techniques such as lattice gauge theories, numerical simulations of many-body systems, and tensor networks are seen as valuable to both communities and will likely benefit from collaborative development.
These are slides from a powerpoint shown to guests during tours of Center for Integrated Nanotechnologies (CINT) at Los Alamos National Laboratory. It shows the five DOE-BES nanoscale science research centers (NSRCs), which are located at different national laboratories throughout the country. Then it goes into detail specifically about the Center for Integrated Nanotechnologies at LANL, including statistics on its user community and CINT's New Mexico industrial users.