Gravity gradient stabilization system elements and antenna structures Final report, 11 Jun. - 11 Dec. 1965
Rollable beryllium copper antenna boom with windows and interlocking seam edges
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Rollable beryllium copper antenna boom with windows and interlocking seam edges
Apollo 11 and 12 lunar dust and rocks, determining Be and Cr contents by gas chromatography for comparison with crystalline rocks
Beryllium-10 contents in the 20-28 dpm/kg range, averaging 24.5 + or - 0.9 dpm/kg, have been obtained for 11 samples taken from along the 35-cm core AIII of the St. Severin LL chondrite. Be-10 content increases with depth in the outermost 8 cm, and there is little change in content at greater depths. Significant disagreement is noted between the measured values and the results of calculations based on the cross sections for proton-induced Be-generating reactions. Cosmogenic Be-10 in stony meteorites is better described as a medium-energy product than a high energy one.
A two-parameter scintillation spectrometer system developed and used to obtain proton, deuteron, and triton double differential cross sections from materials under 558-MeV-proton irradiation is described. The system measures both the time of flight of secondary particles over a 488-cm flight path and the energy deposited in a scintillator, 12.7 cm in diameter and 30.48 cm long. The time resolution of the system is 0.39 nsec. The calculated energy resolution based on this time resolution varies with energy from 1.6 precent to 7.75 percent for 50- and 558-MeV protons. Various systematic and statistical errors are evaluated, and the double differential cross sections for secondary proton and deutron production at 20 deg from a 2.35 g/sq cm thick beryllium target are shown as an example of the results obtainable with this system. The uncertainly in the cross sections for secondary protons varies with particle energy from approximately + or - 9 percent at 50 MeV to approximately + or - 11 percent at 558 MeV.
The abundance of the following elements in the L 16-19 No. 118 regolith sample, zone V was determined by isotopic dilution using a mass spectrometer equipped with a scattering ion source: Li -- 9.8, Be -- 1.2, Be -- 2.6, and Ti -- 1.92 percent. For comparison, these same elements were measured in samples of surface material returned by Apollo 11, Apollo 12, and Apollo 14, and in the terrestrial reference standard diabase W-1. The content of Li, Be, and B in the Luna 16 sample is nearly the same as in the Apollo 11 surface material. The surface material returned by Apollo 12 and Apollo 14 contains two to four times more of these elements. However, the abundance ratios of Li, Be, and B are remarkably similar in the surface materials from the four different lunar regions. With respect to basaltic achondrites and especially with respect to chondrites, the lunar basalts are enriched in Li, Be, and B up to 100 times.
The temperature dependence of the free-carrier concentration in germanium doped with the double acceptor Be has been investigated using the photo Hall-effect technique and found to be strongly temperature dependent when the residual shallow impurities are closely compensated. Close compensation of shallow levels was achieved by controlling the concentration of a beryllium-hydrogen acceptor complex A(Be,H) which is present in crystals grown under a H2 atmosphere. This complex can be removed with high-temperature annealing. An increase of up to two orders of magnitude in free-carrier lifetime as a function of temperature is found to occur between 5 and 11 K in closely compensated material due to the population inversion of ionized centers created by optical pumping.
The photoemission was measured of engineering materials (aluminum; copper, plain; copper, abraded; copper-beryllium; magnesium; silver; In2O3 on silica; reflective coating on silica; teflon; kapton; and Pyre ML) associated with the International Sun Earth Explorer (ISEE) Satellite. The procedures used are described, including the experimental equipment; results of the program, the conclusions reached, and areas for further work are presented. Data regarding the measured yield of the 11 materials whose surface emission was determined is included in the form of plots of photoelectric yield versus incident light wavelength.
Pioneer 10 has successfully encountered Jupiter and several of its satellites. The two-channel infrared radiometer used to obtain data relating to thermal properties of the planet and its atmosphere is described. The instrument features a body-fixed, 7.62-cm-diam aperture Cassegrainian telescope with restrahlen filters defining the 14- to 25-micron and 30- to 56-micron bands. Detectors are 88-junction evaporated thin-film thermopiles. Stringent weight constraints of 2 kg dictated all-beryllium construction. Power consumption was 1.2 W.
A paper describes how, based on a structural-thermal-optical-performance analysis, it has been determined that a single, large, hollow corner cube (170- mm outer diameter) with custom dihedral angles offers a return signal comparable to the Apollo 11 and 14 solid-corner-cube arrays (each consisting of 100 small, solid corner cubes), with negligible pulse spread and much lower mass. The design of the corner cube, and its surrounding mounting and casing, is driven by the thermal environment on the lunar surface, which is subject to significant temperature variations (in the range between 70 and 390 K). Therefore, the corner cube is enclosed in an insulated container open at one end; a narrow-bandpass solar filter is used to reduce the solar energy that enters the open end during the lunar day, achieving a nearly uniform temperature inside the container. Also, the materials and adhesive techniques that will be used for this corner-cube reflector must have appropriate thermal and mechanical characteristics (e.g., silica or beryllium for the cube and aluminum for the casing) to further reduce the impact of the thermal environment on the instrument's performance. The instrument would consist of a single, open corner cube protected by a separate solar filter, and mounted in a cylindrical or spherical case. A major goal in the design of a new lunar ranging system is a measurement accuracy improvement to better than 1 mm by reducing the pulse spread due to orientation. While achieving this goal, it was desired to keep the intensity of the return beam at least as bright as the Apollo 100-corner-cube arrays. These goals are met in this design by increasing the optical aperture of a single corner cube to approximately 170 mm outer diameter. This use of an "open" corner cube allows the selection of corner cube materials to be based primarily on thermal considerations, with no requirements on optical transparency. Such a corner cube also allows for easier pointing requirements, because there is no dependence on total internal reflection, which can fail off-axis.
Beryllium-10 (decays to B-10, t1/2 = t(sub 1/2) = 1.3 Myr) 1.3 Myr) is a radionuclide that exclusively requires a is a radionuclide that exclusively requires a spallation origin. Therefore, one could obtain important insights into the irradiation environment in the solar nebula by understanding the distribution and abundance of this radionuclide in meteoritic inclusions. Most previous data are derived from B isotopic analysis of coarse-grained CV3 Ca-Al-rich Inclusions (CAIs) that have AL-26.Al-27 Al close to the canonical level of 5 x 10 (exp -5) and inferred Be-10/Be-9 ratios between 4 x 10(exp -4) and 1 x 10 (exp -2=3) [1-5]. Al-26-depleted FUN (Fractionaed and Unknown Nuclear anomalies) CAIs are less studied due to their rarity. FUN CAIs are thought to have formed prior to homogenization of Al-26/Al-27 Al and stable isotope anomalies (e.g., Ti-50) in the solar nebula, and thus represent one of the oldest Solar System solids [6]. So far, only three FUN CAIs (Axtell 2771, KT-1 and HAL) from CV3 chondrites have been measured for Be-10. They are characterized by variable Be-10/Be-9 ratios between (2.7−4.4) × 10(exp -4) [4,7]. Another group of rare, Al-26-free and and isotopically more anomalous inclusions, namely platy hibonite crystals (PLACs) from CM2 chondrites, have well-defined Be-10/Be-9 = (5.3 +/- 1.0) x 10 (exp -4) [9]. Al-26-free CAIs appear to have lower Be-1-/Be-9 than Al-26-bearing CAIs, although large analytical errors associated with some data would allow for an apparent overlap. It has been argued that the observed Be-10 variation resulted from the in-situ production of this radionuclide in CAIs (or their precursors) by irradiation, and the ratio difference simply reflects the fluctuation in projectile fluences [e.g., 9]. Another observation in support of this explanation comes from these CAIs' initial B-10/B-11 ratios, most of which are higher than the chondritic value 0.2478 [10]. This has been interpreted as a result of mixing between spallogenic B (B-10/B-11 = 0.4, co-produced with Be-10 in the irradiated solids) and a chondritic component [5,8]. Alternatively, given that all the inferred ratios, most of which are higher than chondritic value 0.2478 [10]. This has been interpreted as a result of mixing between spallogenic B (B-10/B-11 = 0.4, co-produced with Be-10 in the irradiated solics) and a chondritic component [5,8], Alternatively, given that all the inferred ratios in CAIs never fall below 3x10(exp -4), it has been proposed that the Solar System formed with baseline Be-10/Be-9 at this level, which originated from cosmic ray irradiation of the parental molecular cloud, and any value higher than this is a result of additional in-situ spallation [4,11]. Although not explicitly stated in this model, one would expect that inclusions that incorporated the background Be-10 abundance should form with the chondritic B isotopic ratio. However, the three FUN CAIs all have supra-chondritic B-10/B-11 indicative of the presence of a spallogenic component. To test whether some Be-10 did come into the solar nebula by inheritance,a better understanding of Be-10/Be-9 and initial B-10/B-11 in Al-26-free isotopically anomalous samples is needed. Here we present the result of Be10−B-10 system in an unsual hibonite-perovskite inclusion SHAL (son of HAL) from Allende.