Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Note: Spatial resolution of Fuji BAS-TR and BAS-SR imaging plates

The spatial resolution of two types of imaging plates, Fuji BAS-TR and Fuji BAS-SR, has been measured using a knife-edge x-ray source of 8-keV Cu K{sub {alpha}} radiation. The values for the spatial resolution, defined as the distance between 10% and 90% levels of the edge spread function, are 94 {mu}m and 109 {mu}m, respectively. The resolution values are important for quantitative analysis of x-ray and particle imaging and spectroscopic diagnostics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimental study of the proposed super-thermal-conductor: BAs

Recent calculations predict a super-thermal-conductivity of ~2000 Wm -1 K -1 , comparable to that of diamond, in cubic boron arsenide (BAs) crystals, which may offer inexpensive insulators with super-thermal-conductivity for microelectronic device applications. We have synthesized and characterized here single crystals of BAs with a zinc blende cubic structure and lattice parameters of a = 4.7830(7) Å. A relatively high thermal conductivity of ~200 Wm -1 K -1 is obtained, close to those of best non-carbon crystal insulators, such as SiC, although still an order of magnitude smaller than the value predicted. Based on our XPS, X-ray single crystal diffraction, and Raman scattering results, steps to achieve the predicted super-thermal conductivity in BAs are proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Glass formation and short-range order structures in the BaS + La 2 S 3 + GeS 2 system

Infrared (IR) optical materials have enabled a broad range of optical sensing and measurement applications in the mid-wave and long-wave IR. Many IR transmitting glasses are based on covalently-bonded selenides and tellurides, such as As 2 Se 3 and GeTe 2 , which typically have relatively low glass transition temperatures (T g ) on the order of 200 to 350 °C. Many applications have working temperatures above the T g of these materials, which compels the development of new IR materials. This work studies the underlying short-range order (SRO) structure and glass formability of a new family of ionically-bonded sulfide glasses, xBaS + yLa 2 S 3 + (1-x-y)GeS 2 , to develop high T g optical materials with a broad IR transmission range. These sulfide glasses were produced by melting sulfide materials inside evacuated and sealed carbon-coated silica ampoules at 1150 °C for 12 hours and quenching to room temperature to form glass. Glass samples were then characterized by IR and Raman spectroscopies and differential thermal analysis (DTA). It was found that by increasing the modifier concentration, the predominantly Ge 4 SRO units, the superscript defines the number of bridging sulfur (BS) ions in the tetrahedral network found in GeS 2 glasses, are ultimately converted to Ge 0 units at > 40 mol% network modifier content through the generation of non-bridging sulfur (NBS) ions. These molecular ionic units still form a glassy network, with some of the highest reported T g values to date for a pure sulfide glass. This suggests that this composition has strong ionic bonds between negatively-charged tetrahedral SRO units and the positively-charged modifier cations. While the glass network is depolymerized in the high modifier content glasses though the formation of a high concentration of molecular ionic Ge 0 SRO groups, they are, nevertheless, homogeneous glassy materials that exhibit the largest T g and ΔT (difference between crystallization temperature, T c , and T g ) values of glasses in this system, making them the optimal glasses for high T g IR optical components, including, potentially, refractory IR optical fibers.

non-crystalline solids, glass formation↗

Re-Envisioning RCx: Achieving Max Potential HVAC Controls Retrofits through Modernized BAS Hardware and Software

Most existing buildings have sub-optimal heating, ventilation, and air conditioning (HVAC) controls, resulting in wasted energy and occupant discomfort. Retro-commissioning (RCx) addresses many of these issues, but it is a lengthy and highly customized process. Limited capabilities of existing building automation system hardware restricts the scope of most RCx projects. Incentive programs consider building automation system (BAS) hardware retrofits to be high-capital investments and do not allow them in typical RCx programs. This paper describes work that the authors are leading to facilitate technical and market innovation in the BAS industry to unlock large savings in existing commercial buildings through deep retrofits of BAS hardware and software. California and New York research projects are demonstrating BAS retrofits leveraging the American Society of Heating, Refrigeration, and Air Conditioning Engineers’ (ASHRAE) new Guideline 36 high performance sequences of operation to achieve greater than 20 percent whole building energy savings, while saving costs and reducing risk through streamlined processes and standardization across BAS manufacturer product lines and across implementation practices. This paper describes market barriers that impede achieving deep savings from BAS retrofits in custom incentive and traditional RCx programs and presents a new maximum potential BAS retrofit model that addresses these barriers. The new model leverages the authors’ efforts in market enablement through open standards, BAS industry partnerships, and tools for cost-effective scaling that includes tools for project screening, savings calculations, and measurement and verification (M&V). This approach is widely applicable and will be ready for at-scale implementation within two years.

Paliaga, Gwelen↗

Liquid state properties and solidification features of the pseudo binary BaS-La 2 S 3

The high temperature thermodynamic properties of chalcogenides materials based on BaS remain elusive. Herein the pseudo binary BaS-La 2 S 3 is investigated above 1573 K. The liquid properties of BaS-La 2 S 3 are measured by means of high resolution in-situ visualization coupled with thermal arrest measurements in a thermal imaging furnace. This enables to report the first observation of such melts in a container-less setting. The melting points of BaS and La 2 S 3 are revisited at 2454 K and 2004 K respectively. La 2 S 3 demonstrates a high stability in its liquid state, in strike difference with the sublimation observed for BaS. BaS is however partially stabilized with the addition of few percents of La 2 S 3 . The remarkable chemical and thermal stability of La 2 S 3 -rich samples contrasts with the partial decomposition and high vapor pressure observed for BaS-rich samples. Observations and analysis of the solidified samples suggest three different solid solutions. Solid and liquid densities are investigated along the different compositions, supporting a first estimate of the volumetric thermal expansion coefficient for La 2 S 3 .

36 MATERIALS SCIENCE↗

Thermal Conductivity of BAs under Pressure

Abstract The thermal conductivity of boron arsenide (BAs) is believed to be influenced by phonon scattering selection rules due to its special phonon dispersion. Compression of BAs leads to significant changes in phonon dispersion, which allows for a test of first principles theories for how phonon dispersion affects three‐ and four‐phonon scattering rates. This study reports the thermal conductivity of BAs from 0 to 30 GPa. Thermal conductivity vs. pressure of BAs is measured by time‐domain thermoreflectance with a diamond anvil cell. In stark contrast to what is typical for nonmetallic crystals, BAs is observed to have a pressure independent thermal conductivity below 30 GPa. The thermal conductivity of nonmetallic crystals typically increases upon compression. The unusual pressure independence of BAs's thermal conductivity shows the important relationship between phonon dispersion properties and three‐ and four‐phonon scattering rates.

36 MATERIALS SCIENCE↗

Antisite Pairs Suppress the Thermal Conductivity of BAs

BAs was predicted to have an unusually high thermal conductivity with a room temperature value of 2000 W m –1 K –1 , comparable to that of diamond. However, the experimentally measured thermal conductivity of BAs single crystals is still lower than this value. To identify the origin of this large inconsistency, we investigate the lattice structure and potential defects in BAs single crystals at the atomic scale using aberration-corrected scanning transmission electron microscopy (STEM). Rather than finding a large concentration of As vacancies ( V As ), as widely thought to dominate the thermal resistance in BAs, our STEM results show an enhanced intensity of some B columns and a reduced intensity of some As columns, suggesting the presence of antisite defects with As B (As atom on a B site) and B As (B atom on an As site). Additional calculations show that the antisite pair with As B next to B As is preferred energetically among the different types of point defects investigated and confirm that such defects lower the thermal conductivity for B As . Using a concentration of 1.8(8)% (6.6 ± 3.0 × 10 20 cm –3 in density) for the antisite pairs estimated from STEM images, the thermal conductivity is estimated to be 65–100 W m –1 K –1 , in reasonable agreement with our measured value. Our study suggests that As B –B As antisite pairs are the primary lattice defects suppressing thermal conductivity of B As . Possible approaches are proposed for the growth of high-quality crystals or films with high thermal conductivity. In conclusion by employing a combination of state-of-the-art synthesis, STEM characterization, theory, and physical insight, this work models a path toward identifying and understanding defect-limited material functionality.

36 MATERIALS SCIENCE↗

Thermal expansion coefficients of high thermal conducting BAs and BP materials

Recently reported very high thermal conductivities in cubic boron arsenide (BAs) and boron phosphide (BP) crystals could potentially provide a revolutionary solution in the thermal management of high power density devices. To fully facilitate such an application, the compatible coefficient of thermal expansion (CTE) between the heat spreader and the device substrate, in order to minimize the thermal stress, needs to be considered. Here, we report our experimental CTE studies of BAs and BP in the temperature range from 100 K to 1150 K, through a combination of X-ray single crystal diffraction and neutron powder diffraction. Here, we demonstrated that the room temperature CTEs, 3.6 ± 0.15 × 10 –6 /K for BAs and 3.2 ± 0.2 × 10 –6 /K for BP, are more compatible with most of the semiconductors including Si and GaAs, in comparison with diamond, and thus could be better candidates for the future heat spreader materials in power electronic devices.

36 MATERIALS SCIENCE↗

The response function of Fujifilm BAS-TR imaging plates to laser-accelerated titanium ions

Calibrated diagnostics for energetic particle detection allow for the systematic study of charged particle sources. The Fujifilm BAS-TR imaging plate (IP) is a reusable phosphorescent detector for radiation applications such as x-ray and particle beam detection. The BAS-TR IP has been absolutely calibrated to many low-Z (low proton number) ions, and extending these calibrations to the mid-Z regime is beneficial for the study of laser-driven ion sources. The Texas Petawatt Laser was used to generate energetic ions from a 100 nm titanium foil, and charge states Ti 10+ through Ti 12+ , ranging from 6 to 27 MeV, were analyzed for calibration. A plastic detector of CR-39 with evenly placed slots was mounted in front of the IP to count the number of ions that correspond with the IP levels of photo-stimulated luminescence (PSL). Here, a response curve was fitted to the data, yielding a model of the PSL signal vs ion energy. Comparisons to other published response curves are also presented, illustrating the trend of PSL/nucleon decreasing with increasing ion mass.

47 OTHER INSTRUMENTATION↗

Impact of classical statistics on thermal conductivity predictions of BAs and diamond using machine learning molecular dynamics

Machine learning interatomic potentials (MLIPs) have greatly enhanced molecular dynamics (MD) simulations, achieving near-first-principles accuracy in thermal conductivity studies. In this work, we reveal that this accuracy, observed in BAs and diamond at sub-Debye temperatures, stems from an accidental error cancelation: classical statistics overestimates specific heat while underestimating phonon lifetimes, balancing out in thermal conductivity predictions. However, this balance is disrupted when isotopes are introduced, leading MLIP-based MD to significantly underpredict thermal conductivity compared to experiments and quantum statistics-based Boltzmann transport equation. This discrepancy arises not from classical statistics affecting phonon–isotope scattering rates but from its impact on the interplay between phonon–isotope and phonon–phonon scattering in the normal scattering-dominated BAs and diamond. In conclusion, this work underscores the limitations of MLIP-based MD for thermal conductivity studies at sub-Debye temperatures.

36 MATERIALS SCIENCE↗

Materials Data on BAs by Materials Project

BAs is Zincblende, Sphalerite structured and crystallizes in the cubic F-43m space group. The structure is three-dimensional. B3+ is bonded to four equivalent As3- atoms to form corner-sharing BAs4 tetrahedra. All B–As bond lengths are 2.09 Å. As3- is bonded to four equivalent B3+ atoms to form corner-sharing AsB4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on BaS by Materials Project

BaS is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. Ba2+ is bonded to six equivalent S2- atoms to form a mixture of edge and corner-sharing BaS6 octahedra. The corner-sharing octahedral tilt angles are 0°. All Ba–S bond lengths are 3.23 Å. S2- is bonded to six equivalent Ba2+ atoms to form a mixture of edge and corner-sharing SBa6 octahedra. The corner-sharing octahedral tilt angles are 0°.

36 MATERIALS SCIENCE↗

Materials Data on BAs by Materials Project

BAs is Wurtzite structured and crystallizes in the hexagonal P6_3mc space group. The structure is three-dimensional. B3+ is bonded to four equivalent As3- atoms to form corner-sharing BAs4 tetrahedra. There are three shorter (2.08 Å) and one longer (2.10 Å) B–As bond lengths. As3- is bonded to four equivalent B3+ atoms to form corner-sharing AsB4 tetrahedra.

36 MATERIALS SCIENCE↗

Backbone chemical shift assignments and secondary structure analysis of the U1 protein from the Bas-Congo virus

The Bas-Congo virus (BASV) is the first rhabdovirus associated with a human outbreak of acute hemorrhagic fever. The single-stranded, negative-sense RNA genome of BASV contains the five core genes present in all rhabdoviral genomes plus an additional three genes, annotated U1, U2, and U3, with weak (<21%) sequence similarity only to a handful of genes observed in a few other rhabdoviral genomes. The function of the rhabdoviral U proteins is unknown, but, they are hypothesized to play a role in viral infection or replication. To better understand this unique family of proteins, a construct containing residues 27–203 of the 216-residue U1 protein (BASV-U1*) was prepared. By collecting data in 0.5 M urea it was possible to eliminate transient association enough to enable the assignment of most of the observable 1 H N , 1 Hα, 15 N, 13 Cα, 13 Cβ, and 13 C´ chemical shifts for BASV-U1* that will provide a foundation to study its solution properties. Here, the analyses of these chemical shifts along with 15 N-edited NOESY data enabled the identification of the elements of secondary structure present in BASV-U1*.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Asymmetric kinetic equilibria: Generalization of the BAS model for rotating magnetic profile and non-zero electric field

Finding kinetic equilibria for non-collisional/collisionless tangential current layers is a key issue as well for their theoretical modeling as for our understanding of the processes that disturb them, such as tearing or Kelvin Helmholtz instabilities. The famous Harris equilibrium [E. Harris, Il Nuovo Cimento Ser. 10 23, 115–121 (1962)] assumes drifting Maxwellian distributions for ions and electrons, with constant temperatures and flow velocities; these assumptions lead to symmetric layers surrounded by vacuum. This strongly particular kind of layer is not suited for the general case: asymmetric boundaries between two media with different plasmas and different magnetic fields. The standard method for constructing more general kinetic equilibria consists in using Jeans theorem, which says that any function depending only on the Hamiltonian constants of motion is a solution to the steady Vlasov equation [P. J. Channell, Phys. Fluids (1958–1988) 19, 1541 (1976); M. Roth et al., Space Sci. Rev. 76, 251–317 (1996); and F. Mottez, Phys. Plasmas 10, 1541–1545 (2003)]. The inverse implication is however not true: when using the motion invariants as variables instead of the velocity components, the general stationary particle distributions keep on depending explicitly of the position, in addition to the implicit dependence introduced by these invariants. The standard approach therefore strongly restricts the class of solutions to the problem and probably does not select the most physically reasonable. The BAS (Belmont-Aunai-Smets) model [G. Belmont et al., Phys. Plasmas 19, 022108 (2012)] used for the first time the concept of particle accessibility to find new solutions: considering the case of a coplanar-antiparallel magnetic field configuration without electric field, asymmetric solutions could be found while the standard method can only lead to symmetric ones. These solutions were validated in a hybrid simulation [N. Aunai et al., Phys. Plasmas (1994-present) 20, 110702 (2013)], and more recently in a fully kinetic simulation as well [J. Dargent and N. Aunai, Phys. Plasmas (submitted)]. Nevertheless, in most asymmetric layers like the terrestrial magnetopause, one would indeed expect a magnetic field rotation from one direction to another without going through zero [J. Berchem and C. T. Russell, J. Geophys. Res. 87, 8139–8148 (1982)], and a non-zero normal electric field. In this paper, we propose the corresponding generalization: in the model presented, the profiles can be freely imposed for the magnetic field rotation (although restricted to a 180 rotation hitherto) and for the normal electric field. As it was done previously, the equilibrium is tested with a hybrid simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Battery Pack Life Estimation through Cell Degradation Data and Pack Thermal Modeling for BAS+ Li-Ion Batteries. Cooperative Research and Development Final Report, CRADA Number CRD-12-489

Battery Life estimation is one of the key inputs required for Hybrid applications for all GM Hybrid/EV/EREV/PHEV programs. For each Hybrid vehicle program, GM has instituted multi-parameter Design of Experiments generating test data at Cell level and also Pack level on a reduced basis. Based on experience, generating test data on a pack level is found to be very expensive, resource intensive and sometimes less reliable. The proposed collaborative project will focus on a methodology to estimate Battery life based on cell degradation data combined with pack thermal modeling. NREL has previously developed cell-level battery aging models and pack-level thermal/electrical network models, though these models are currently not integrated. When coupled together, the models are expected to describe pack-level thermal and aging response of individual cells. GM and NREL will use data collected for GM's Bas+ battery system for evaluation of the proposed methodology and assess to what degree these models can replace pack-level aging experiments in the future.

25 ENERGY STORAGE↗

Band-overlap metallization of BaS, BaSe and BaTe

The insulator-metal transition volumes for BaS, BaSe, and BaTe are calculated for the first time, using the self-consistent augmented spherical wave technique. The metallized transition volumes are smaller than those corresponding to the NaCl yields CsCl structural transitions, but, 10 to 15% larger than those obtained by the Herzfeld dielectric theory. The calculated equilibrium energy gaps in the NaCl structure underestimate the measured ones by 50 to 60%.

Carlsson, A. E.↗

Calculated electronic, transport, and related properties of zinc blende boron arsenide (zb-BAs)

Here, we present the results from ab-initio, self-consistent density functional theory (DFT) calculations of electronic, transport, and bulk properties of zinc blende boron arsenide. We utilized the local density approximation potential of Ceperley and Alder, as parameterized by Vosko and his group, the linear combination of Gaussian orbitals formalism, and the Bagayoko, Zhao, and Williams (BZW) method, as enhanced by Ekuma and Franklin (BZW-EF), in carrying out our completely self-consistent calculations. With this method, the results of our calculations have the full, physical content of density functional theory (DFT). Our results include electronic energy bands, densities of states, effective masses, and the bulk modulus. Our calculated, indirect band gap of 1.48 eV, from C to a conduction band minimum close to X, for the room temperature lattice constant of 4.777 Å, is in an excellent agreement with the experimental value of 1.46 6 0.02 eV. We thor-oughly explain the reasons for the excellent agreement between our findings and corresponding, experimental ones. This work provides a confirmation of the capability of DFT to describe accu-rately properties of materials, provides a confirmation of the capability of DFT to describe accu-rately properties of materials, if the computations adhere strictly to the conditions of validity of DFT, as done by the BZW-EF method.

36 MATERIALS SCIENCE↗