Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aspen”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

AmeriFlux FLUXNET-1F US-PFc NW2 Aspen-1 CHEESEHEAD 2019

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-PFc NW2 Aspen-1 CHEESEHEAD 2019. This is the FLUXNET version of the carbon flux data for the site US-PFc NW2 Aspen-1 CHEESEHEAD 2019 produced by applying the standard ONEFlux (1F) software. Site Description - This tower (12m Rohn) is located in the northwestern quadrant of the 10 x 10km study domain. It is located in a forest of short aspen (3m tall). Several older aspen and conifers are interspersed within the regrowing aspen forest (15-20m tall).

Desai, Ankur↗
DOE OSTI2024

Use of Renewable Alcohols in Autocatalytic Production of Aspen Organosolv Lignins

This study aimed to investigate the intrinsic efficiency of renewable alcohols, applied under autocatalytic conditions, for removing lignin from aspen and hot-water-extracted aspen while substantially preserving the lignin structure so as to facilitate various valorization strategies. Ethylene glycol (EG), propylene glycol (PG), 1,4-butanediol (BDO), ethanol (EtOH), and tetrahydrofurfuryl alcohol (THFA) were evaluated based on their lignin solubilization ability, expressed as the relative energy difference (RED) following the principles of the Hansen solubility theory. The findings indicate that alcohols with a higher lignin solubilization potential lead to increased delignification, almost 90%, and produce a lignin with a higher content of β-O-4 bonds, up to 68% of those found in aspen milled wood lignin, thereby indicating their potential for valorization through depolymerization. However, these alcohols also produce lignin with a higher content of β-β and β-5 bonds, resulting in a higher molecular weight and polydispersity, due to readily occurring homolytic reactions. Hot-water extraction (HWE) conducted prior to alcohol treatment reduced the delignification efficiency and resulted in a lignin with a lower β-O-4 bond content. The lignins produced in these experiments exhibited a superior UV-A absorption capacity compared with synthetic benzophenone, as well as a greater radical quenching ability than synthetic butylated hydroxytoluene, indicating their potential for use in the protection of polymers against degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

AmeriFlux FLUXNET-1F US-PFk SW1 Aspen-2 CHEESEHEAD 2019

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-PFk SW1 Aspen-2 CHEESEHEAD 2019. This is the FLUXNET version of the carbon flux data for the site US-PFk SW1 Aspen-2 CHEESEHEAD 2019 produced by applying the standard ONEFlux (1F) software. Site Description - This tower (32m, trailer-based, telescoping) is located in the southwestern quadrant of the 10 x 10km study domain. It is located in an aspen forest (canopy height: immediate vicinity - 10m; greater area - 24.4 m).

Desai, Ankur↗
DOE OSTI2024

AmeriFlux FLUXNET-1F US-PFL SW2 Aspen-3 CHEESEHEAD 2019

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-PFL SW2 Aspen-3 CHEESEHEAD 2019. This is the FLUXNET version of the carbon flux data for the site US-PFL SW2 Aspen-3 CHEESEHEAD 2019 produced by applying the standard ONEFlux (1F) software. Site Description - This tower (25m Rohn) is located in the southwestern quadrant of the 10 x 10km study domain. It is located in an aspen forest (canopy height: 15 - 19.2 m).

Desai, Ankur↗
DOE OSTI2024

AmeriFlux FLUXNET-1F US-PFq SE3 Aspen-4 CHEESEHEAD 2019

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-PFq SE3 Aspen-4 CHEESEHEAD 2019. This is the FLUXNET version of the carbon flux data for the site US-PFq SE3 Aspen-4 CHEESEHEAD 2019 produced by applying the standard ONEFlux (1F) software. Site Description - This tower (32m, trailer-based, telescoping) is located in the southeastern quadrant of the 10 x 10km study domain. It is located in an aspen forest (canopy height: 10 - 14.3 m).

Desai, Ankur↗
DOE OSTI2025

Calculating the Effects of Solids Input and Removal as a Temperature Control in the Advanced Scale Up Reactor Experiment (ASURE) Facility at NETL Using Aspen

The Advanced Scale Up Reactor Experiment (ASURE) facility at NETL is being designed to be a fuel-flexible multi-purpose reactor that can be used for pyrolysis/gasification or evaluation of other high pressure “circulating fluidized bed” (CFB) chemical processes. The initial system design calculations for pyrolysis/gasification are presented in this work showing the expected performance of the ASURE facility when used as a biomass conversion reactor. Several other areas of application include gasification of any carbonaceous fuel including biomass, coal, plastics, and other waste materials. The reactor can therefore be used to produce SYNGAS of various compositions and hydrogen as well as other high value chemicals resulting from a typical tuned gasification process. This paper discusses an ASPEN model of the facility, focusing on the riser of the CFB reactor and the solids recirculation loop. The ASPEN model divides the riser into two sections. A bottom section which receives ash, char and sand which have been recirculated from a return loop. In this section an inert fluidization gas, (N2 or CO2), is introduced which acts as the primary mover of the solids through the system. The bottom section is equipped with a restricted air feed so that the recirculated char can be partially oxidized. This oxidation process along with the inventory of recirculating sand are used to effectively control the temperature in the following two chemical conversion sections of the reactor which are the pyrolysis zone followed by a tar cracking zone. Fresh fuel is added to the pyrolysis zone and undergoes drying and devolatilization. The products ash, char, volatile matter, and water vapor exit the pyrolysis zone and enter the reaction block for tar cracking. Steam and CO2 gasification reactions will be incorporated into the tar cracking zone, however at the design operating temperature, conversion from these reactions is expected to be essentially zero. The unit when completed in 2026 will test mixtures of biomass, plastics, and waste coal. This presentation discusses the basic ASPEN engineering design model for this project and provides preliminary sensitivity studies to determine how the various parts of the reactor will perform.

ASSURE↗
DOE OSTI2024

Remote Sensing Detection of Growing Season Freeze-Induced Defoliation of Montane Quaking Aspen (Populus tremuloides) in Southern Utah, USA

Growing season freeze events pose a threat to quaking aspen (Populus tremuloides Michx.), leading to canopy defoliation, reduced vigor, and increased mortality, especially for declining montane populations western North America. Detecting the spatial distribution and progression of this damage is challenging due to limited in situ observations in this region. This study represents the first attempt to comprehensively resolve the spatial extent of freeze-induced aspen canopy damage in southern Utah using multispectral remote sensing data. We developed an approach to detect the spatial and temporal dynamics of freeze-damaged aspen stands, focusing on a freeze event from 8–9 June 2020 in southern Utah. By integrating medium- (~250 to 500 m) and high-resolution (~10 m) satellite data, we employed the Normalized Difference Vegetation Index (NDVI) to compare post-freeze conditions with historical norms and pre-freeze conditions. Our analysis revealed NDVI reductions of 0.10 to 0.40 from pre-freeze values and a second flush recovery. We introduced a pixel-based method to evaluate freeze vulnerability, establishing a strong correlation (R values 0.78 to 0.82) between the onset of the first flush (NDVI > 0.50) and the accumulation of 100 growing degree days (GDD). These methods support the potential for retrospective assessments, proactive forest monitoring, and forecasting future risks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Calculating the Effects of Solids Input and Removal as a Temperature Control in the Advanced Scale Up Reactor Experiment (ASURE) Facility at NETL Using Aspen

The Advanced Scale Up Reactor Experiment (ASURE) facility at NETL is being designed to be a fuel-flexible multi-purpose reactor that can be used for pyrolysis/gasification or evaluation of other high pressure “circulating fluidized bed” (CFB) chemical processes. The initial system design calculations for pyrolysis/gasification are presented in this work showing the expected performance of the ASURE facility when used as a biomass conversion reactor. Several other areas of application include gasification of any carbonaceous fuel including biomass, coal, plastics, and other waste materials. The reactor can therefore be used to produce SYNGAS of various compositions and hydrogen as well as other high value chemicals resulting from a typical tuned gasification process. This paper discusses an ASPEN model of the facility, focusing on the riser of the CFB reactor and the solids recirculation loop. The ASPEN model divides the riser into two sections. A bottom section which receives ash, char and sand which have been recirculated from a return loop. In this section an inert fluidization gas, (N2 or CO2), is introduced which acts as the primary mover of the solids through the system. The bottom section is equipped with a restricted air feed so that the recirculated char can be partially oxidized. This oxidation process along with the inventory of recirculating sand are used to effectively control the temperature in the following two chemical conversion sections of the reactor which are the pyrolysis zone followed by a tar cracking zone. Fresh fuel is added to the pyrolysis zone and undergoes drying and devolatilization. The products ash, char, volatile matter, and water vapor exit the pyrolysis zone and enter the reaction block for tar cracking. Steam and CO2 gasification reactions will be incorporated into the tar cracking zone, however at the design operating temperature, conversion from these reactions is expected to be essentially zero. The unit when completed in 2026 will test mixtures of biomass, plastics, and waste coal. This paper presents the basic ASPEN engineering design model for this project and provides preliminary sensitivity studies to determine how the various parts of the reactor will perform.

ASSURE↗
DOE OSTI2025

Montane Conifer, Aspen, Meadow, and Sagebrush Metagenome Resolved Genomes and Traits in East River Watershed, Colorado, USA

Climate change is driving vegetation shifts in mountain watersheds, with unknown impacts on biogeochemical cycles. We hypothesize that these shifts will reshape soil microbiomes and associated biogeochemical processes. As a part of Lawrence Berkeley National Laboratory (LBNL) Watershed Science Focus Area (SFA), we assessed microbiome and microbial functional trait differences between soils under conifer, aspen, forby meadows, and sagebrush across the East River Watershed, CO, controlling for elevation and aspect.Here we present metagenome assembled genomes (MAGs) for the bacterial and archaeal communities from soils 0-20cm in depth across three locations in the watershed—Headwaters, Upper Reaches, and Lower Reaches from August 3-11th 2016. Each location was further subdivided into two blocks, with one block on a west facing aspect, and two on the east aspect of the valley. Within blocks, two samples per vegetation type were taken (one at each depth). This resulted in 66 samples, which were sequenced at JGI and can be found under the Joint Genome Institute (JGI) Genomes Online Database (GOLD) sequencing project Gs0118068. Metagenomes were assembled through an inhouse pipeline (see methods), binned using four autobinners (concoct, maxbin2, metabat2, and vamb) and consolidated using dastool. The consolidated bins from all metagenomes were pooled, filtered by completeness (>75%) and contamination (<25%), and dereplicated at 95% ANI using drep. The dataset includes a zip file of 687 genomes (Vegtype_MAGS.zip), the accession numbers for the underlying metagenomes, a csv file with MAG quality metrics and taxonomy from Genome Taxonomy Database (GTDB) and National Center for Biotechnology Information (NCBI) taxonomic representative genome proteins (EastRiver_Vegtype_drep_genome_info.csv), and a file containing MAG quality metrics and taxonomy (gtdb_drep_bin_taxonomy.csv). The dataset additionally includes a sample metadata file (EastRiver_Vegtype_sample_metadata.csv), a metadata file used to register associated samples with IGSNs (International Generic Sample Numbers) (samples.csv), a Google KML file for the sampled locations (sample_collection_sites.kml), a location metadata file (locations.csv), a file-level metadata file (flmd.csv), and a data dictionary (dd.csv) file.This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Novel quantum states of matter in moiré materials (2023 Aspen Winter Conference)

This report is to summarize the proceedings of the conference “Novel Quantum States of Matter in Moiré Materials,” which was held at the Aspen Center for Physics, March 12 – 17, 2023. The conference organizers thank the Department of Energy (DOE) for providing funding support for the conference. The advent of moiré quantum materials has opened a highly tunable platform for exploring the interplay between electronic structure, interactions, symmetry, and topology. Since the discovery of correlated insulator states and superconductivity in magic-angle twisted bilayer graphene (MATBG), a growing variety of moiré systems have emerged, revealing novel correlated and topological phenomena such as quantum anomalous Hall systems, generalized Wigner crystals, and fractional Chern insulators. This rich phenomenology continues to attract intense theoretical and experimental interest.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Ectopic expression of pectate lyase PtxtPL1-27 in aspen affects leaf cuticle development

Cuticle - a hydrophobic barrier of cutin and waxes covering the outer cell wall surface of plants - enables survival in terrestrial habitats. However, it is not understood how the hydrophobic cuticle precursors travel through the homogalacturonan-rich hydrophilic cell wall. To elucidate the role of homogalacturonan in cuticle development, we disrupted its integrity by overexpressing a pectate lyase, PtxtPL1-27, in aspen. PtxtPL1-27 had pleiotropic effects on shoot development, including the reduction of cuticle thickness and changes in cutin and wax composition, but the expression of cutin biosynthetic genes was little affected. Despite a reduction in homogalacturonan content in the leaves, labeling with the homogalacturonan-specific antibody JIM5 in the outer epidermal cell wall layer increased and displayed an altered pattern. Moreover, the ultrastructure of cell walls was changed concomitant with lipid accumulation. We propose that the disruption of homogalacturonan integrity affected the cutinsome-dependent transport and polymerization of cutin monomers in the cell wall.

Plant Biology↗
DOE OSTI2024

Daily water stable isotopes, transpiration, and matrix potential data for an aspen and engelmann stand in the East River Watershed (version 2)

We provide daily stable isotope (2H & 18O) ratios in soil water and xylem (plant stem) water, as well as the sap flow (transpiration) and the soil's matric potential at a forested site near Gothic, Colorado, in the East River catchment. We measured the stable isotopic composition of the transpiration and the daily transpiration flux sum of three aspen and three engelmann spruce. In both forest stands, we installed a soil profile and measured the soil matric potential at 15, 30, and 60 cm depth as well as the stable isotopes of soil pore water at 5, 10, 30, 60, and 90 cm depths. All isotope measurements were done in situ via vapor probes connected to a cavity ring down spectrometer (Picarro L1240i).We further report the daily meteorological data observed at billy barr near our study site. We also provide for each tree the relative share of root water uptake derived from the isotope measurements via a Bayesian mixing model (MixSIAR).The daily data is provided as a time series in "Iso_MP_Sap_DataDaily_ESSDiveUpload.csv" and the units are provided in "dd.csv"; the location of the instrumented trees and soil profiles are given as latitude and longitude coordinates saved as CSV and KMZ files; and a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata.The data was gathered to investigate the short-term changes of the water sources (i.e., variation of root water uptake from different soil depths) of the studied subalpine trees.Update 07/16/2025: The relative and absolute plant water uptake depths were grouped to ensure that the MixSIAR model was applied with endmembers that differed in their d2H value by at least 3 permill and at least 1 permill for d18O. Whenever the difference between observed d2H values for two or more probes at neighboring depths was less than 3 permill, we used the average value for the source water endmember. For days at which probes that were not next to each other measurements did not differ at least 3 permill, the average of all probes between these two depths was used as the water source endmember representing the depth range between these two probes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Effects of feruloyl-CoA 6'-hydroxylase 1 overexpression on lignin and cell wall characteristics in transgenic hybrid aspen

In plant cell walls, lignin, cellulose, and the hemicelluloses form intricate three-dimensional structures. Owing to its complexity, lignin often acts as a bottleneck for the efficient utilization of polysaccharide components as biochemicals and functional materials. A promising approach to mitigate and/or overcome lignin recalcitrance is the qualitative and quantitative modification of lignin by genetic engineering. Feruloyl-CoA 6'-hydroxylase (F6'H1) is a 2-oxoglutarate-dependent dioxygenase that catalyzes the conversion of feruloyl-CoA, one of the intermediates of the lignin biosynthetic pathway, into 6'-hydroxyferuloyl-CoA, the precursor of scopoletin (7-hydroxy-6-methoxycoumarin). In a previous study with Arabidopsis thaliana, we demonstrated that overexpression of F6'H1 under a xylem-preferential promoter led to scopoletin incorporation into the cell wall. This altered the chemical structure of lignin without affecting lignin content or saccharification efficiency. In the present study, the same F6'H1 construct was introduced into hybrid aspen (Populus tremula × tremuloides T89), a model woody plant, and its effects on plant morphology, lignin chemical structure, global gene expression, and phenolic metabolism were examined. The transgenic plants successfully overproduced scopoletin while exhibiting severe growth retardation, a phenotype not previously observed in Arabidopsis. Scopoletin accumulation was most pronounced in the secondary walls of tracheary elements and the compound middle lamella, with low levels in the fiber cell walls. Overexpression of F6'H1 also affected the metabolism of aromatics, including lignin precursors. Heteronuclear single-quantum coherence (HSQC) NMR spectroscopy revealed that scopoletin in cell walls was bound to lignin, leading to a reduction in lignin content and changes in its monomeric composition and molar mass distribution. Furthermore, the enzymatic saccharification efficiency of the transgenic cell walls was more than three times higher than that of the wild-type plants, even without pretreatment. Although addressing growth inhibition remains a priority, incorporating scopoletin into lignin demonstrates significant potential for improving woody biomass utilization.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Aspen Open Jets: unlocking LHC data for foundation models in particle physics

Foundation models are deep learning models pre-trained on large amounts of data which are capable of generalizing to multiple datasets and/or downstream tasks. This work demonstrates how data collected by the CMS experiment at the Large Hadron Collider can be useful in pre-training foundation models for HEP. Specifically, we introduce the AspenOpenJets (AOJs) dataset, consisting of approximately 178 M high p T jets derived from CMS 2016 Open Data. We show how pre-training the OmniJet-α foundation model on AOJs improves performance on generative tasks with significant domain shift: generating boosted top and QCD jets from the simulated JetClass dataset. In addition to demonstrating the power of pre-training of a jet-based foundation model on actual proton–proton collision data, we provide the ML-ready derived AOJs dataset for further public use.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Opportunistic Short‐Term Water Uptake Dynamics by Subalpine Trees Observed via In Situ Water Isotope Measurements

Abstract Variations in tree water sources are important to understand in semi‐arid ecosystems because climatic shifts towards lower snowpack and increased drought affect water availability in subalpine forests of the western US. Here, we use daily in situ measurements of stable isotopes ( 2 H & 18 O) in soil and tree stem water, soil matric potential and sap flow to study tree water uptake dynamics. We instrumented three soil profiles down to 90 cm, as well as three aspen and engelmann spruce trees near Gothic, Colorado, in the East River watershed. We observed the fate of natural isotopic variations in rainfall, soil, and plants from June to October 2022, and in August 2023 we conducted a 2 H labeled irrigation experiment. Our observations showed that all studied aspen trees compensated for water scarcity in the shallow soil by shifting the dominant water source at 60(±20) cm to ⅔ of uptake from 90 cm within a few days of a dry period. Both species relied on snowmelt stored in the subsoil to sustain transpiration. Intense rainfall caused the plant water uptake to shift partially to top soil layers within 2 days. Spruce transpiration was lower and relied more on snowmelt, because rainfall infiltration was low in the spruce stand due to high canopy interception. Our findings highlight the important role of snowmelt stored in the deep soil layers for subalpine forest drought response and the dominant fate of monsoonal rainfall to become transpiration rather than recharging groundwater and streams in the Upper Colorado River. Plain Language Summary There is a need to understand how trees in mountainous regions respond to dry conditions that lead to water scarcity, because climate projections suggest that such conditions will become more frequent in the future. Here we present a novel data set of measurements of daily stable isotopes of water across soil profiles and in tree stems of aspen and spruce. Our data show that when the upper soil dried out, aspen trees shifted to using water from deeper layers (beneath 60 cm) to keep transpiring. For spruce trees the uptake pattern is less clear, but both types of trees mainly used snowmelt stored in the deeper soil layers to survive the dry summer. After heavy rain, aspen and spruce trees switched to using water from the top 20 cm of soil. However, for spruce, only some rain reached the soil because the dense tree canopy intercepted it, so spruce trees stayed more dependent on snowmelt and used less water overall. This study shows how important deep snowmelt water is for helping forests survive dry periods and suggests that most summer rain is quickly used by trees rather than replenishing streams and groundwater in the headwaters of the Colorado River. Key Points Tree water resources changed within a few days from snow dominated to higher share of rainfall as soils wetted up after a dry period Compensatory plant water uptake by aspen from the deep layer (90 cm), while uptake from soil depths that became drier (60 cm) declined Strong differences between water sources and availability beneath aspen and spruce, respectively

Sprenger, Matthias↗
DOE OSTI2024

Accurate numerical simulations of open quantum systems using spectral tensor trains

Decoherence between qubits is a major bottleneck in quantum computations. Decoherence results from intrinsic quantum and thermal fluctuations as well as noise in the external fields that perform the measurement and preparation processes. With prescribed colored noise spectra for intrinsic and extrinsic noise, we present a numerical method, Quantum Accelerated Stochastic Propagator Evaluation (Q-ASPEN), to solve the time-dependent noise-averaged reduced density matrix in the presence of intrinsic and extrinsic noise. Q-ASPEN is arbitrarily accurate and can be applied to provide estimates for the resources needed to error-correct quantum computations. We employ spectral tensor trains, which combine the advantages of tensor networks and pseudospectral methods, as a variational ansatz to the quantum relaxation problem and optimize the ansatz using methods typically used to train neural networks. Here, the spectral tensor trains in Q-ASPEN make accurate calculations with tens of quantum levels feasible. We present benchmarks for Q-ASPEN on the spin-boson model in the presence of intrinsic noise and on a quantum chain of up to 32 sites in the presence of extrinsic noise. In our benchmark, the memory cost of Q-ASPEN scales as a low-order polynomial in the size of the system once the number of system states surpasses the number of basis functions used in the spectral expansion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Thermal Integration of Advanced Nuclear Reactors with a Reference Refinery, Methanol Synthesis, and a Wood Pulp Plant (Rev.1)

The present report is intended to provide process flow diagrams (PFDs) and energy and mass balance data sheets for a U.S. industrial sector subset with which nuclear heat and power could be integrated—a subset that includes the oil refining, methanol and pulp and paper industries. Coupling options for integrating nuclear energy into these industries are quantitatively outlined for reference systems, and future work will extend this analysis in greater detail. Opportunities for integrating small modular nuclear reactors (SMNRs) were investigated for each of the industrial process configurations. Aspen HYSYS and Cycle-Tempo models for a high-temperature gas-cooled reactor were developed to evaluate the proposed integration. This introductory evaluation provides a general description and assessment of the operating principles, reactor coolant core outlet temperature, and reactor size to be integrated with industry. The industrial processes of oil refining and the production of methanol, pulp and paper were simulated by using Aspen HYSYS, Aspen Plus, and the PRELIM (Petroleum Refinery Life Cycle Inventory Model) tool to develop process details. Cycle-Tempo models then extend the process modeling results to obtain net energy demands (e.g., heat, steam, and electricity) when accounting for process steam and waste heat recovery. This information is intended to foster the analysis of integrating an SMNR to decarbonize industrial facilities. The SMNR would provide reliable, competitive, and sustainable clean energy while reducing carbon emissions and other environmental impacts, such as water withdrawals, consumption, and contamination. The refining industry, exhibited in Figure ES1, is a leading consumer of fossil -fuel-based heat, power, and hydrogen in the U.S. industrial sector, generating over 164 million metric tons (MMT) of CO 2 emissions in 2023. The overall mass and energy pertaining to a generalized complex refinery in the United States is reflected in Figure ES1, along with energy metrics regarding integration with a nuclear power plant (NPP). Data sheets were developed to indicate the energy requirements for the overall refinery and each refinery process. The data sheet for the overall refinery is shown in Table ES2.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Expanding the horizon of bio-naphtha beyond gasoline blend: property characterization and conversion opportunity assessment through technoeconomic and life-cycle analyses

Bio-naphtha, a common by-product of biorefineries, is expected to experience substantial growth in supply due to increasing demands for renewable diesel and synthetic aviation fuel (SAF). However, demand for bio-naphtha itself as a gasoline blendstock is limited because of the electrification of light-duty vehicles. This work investigated valorization opportunities for bio-naphtha from catalytic fast pyrolysis, hydrothermal liquefaction, Fischer–Tropsch synthesis, and hydrotreated esters and fatty acids pathways. These opportunities include producing polymer-grade olefin via steam cracking, SAF via steam cracking followed by olefin oligomerization, and renewable aromatics benzene, toluene, and xylene (BTX) and hydrogen via catalytic reforming. Process models were developed in Aspen Plus V14 and Aspen HYSYS V14 to calculate the mass and energy balances for each conversion step. Technoeconomic assessment and life-cycle analysis were conducted to evaluate the minimum fuel/product selling price, conversion cost, and life-cycle CO2 equivalent (CO2e) emission reduction. Technoeconomic assessment results suggest a minimum fuel/product selling price as low as $1.9/kg of olefins, $6.30/gal of gasoline-equivalent SAF, and $1.2/kg of BTX without any incentives. For all pathways, these prices are dominated by bio-naphtha feedstock costs, which account for at least 76% of the total cost. Compared with petroleum baselines, bio-naphtha-derived SAF, olefins, and BTX can achieve significant CO2e emission reductions from the use of renewable carbon resources. The results of life-cycle analysis and subsequent technoeconomic assessment, incorporating carbon credits, indicate the economic viability of using bio-naphtha for polymer-grade olefin and BTX production, with product costs comparable to market prices.

Xu, Shuang↗