Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Amorphous materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Development of improved amorphous materials for laser systems

Crystallization calculations were performed in order to determine the possibility of forming a particular type of laser glass with the avoidance of devitrification in an outer space laboratory. It was demonstrated that under the homogenuous nucleating conditions obtainable in a zero gravity laboratory this laser glass may be easily quenched to a virtually crystal-free product. Experimental evidence is provided that use of this material as a host in a neodymium glass laser would result in more than a 10 percent increase in efficiency when compared to laser glass rods of a similar composition currently commercially available. Differential thermal analysis, thermal gradient oven, X-ray diffraction, and liquidus determination experiments were carried out to determine the basics of the crystallization behavior of the glass, and small-angle X-ray scattering and splat-cooling experiments were performed in order to provide additional evidence for the feasibility of producing this laser glass material, crystal free, in an outer space environment.

Neilson, G. F.↗
NASA NTRS1973

Lunar black spots and nature of the Apollo 17 landing area.

A few small areas on the moon with extremely low albedo are shown also to have similar spectral reflectivity and radar backscatter characteristics. These lunar 'black spots' include the dark mantling material of the Apollo 17 landing site as well as areas of the Sulpicious Gallus formation. Excluded from the black spot group are the dark haloed craters of Alphonsus and the normal dark mare areas such as northern Mare Tranquillitatis. Earth-based radar and optical measurements indicate that these lunar black spots have rock-free surfaces with a very low proportion of crystalline material to amorphous material. The glassy soil is rich in iron and titanium, at least to the concentrations found at the Apollo 11 site. Crystalline pyroxene is present also. The data for the black spots are consistent with a mantling material of ash or cinder.

Pieters, C.↗
NASA NTRS1968

Electron beam recrystallization of amorphous semiconductor materials

Nucleation and growth of crystalline films of silicon, germanium, and cadmium sulfide on substrates of plastic and glass were investigated. Amorphous films of germanium, silicon, and cadmium sulfide on amorphous substrates of glass and plastic were converted to the crystalline condition by electron bombardment.

Evans, J. C., Jr.↗
NASA NTRS1973

Free suspension processing of oxides to form amorphous oxide materials, appendix B

The processing of yttria, zirconia, and alumina under weightless conditions is discussed. The process consists of levitation or position control, heating and melting, superheating, and supercooling. The use of arc imaging furnaces, lasers, induction heating, microwave, and electron beam methods are analyzed to show the advantages and disadvantages of each.

Wouch, G.↗
NASA NTRS1976

Solid-state growth of Si to produce planar surfaces

Paralleling the sophisticated control of Si and GaAs growth from fluid media, we demonstrate control of Si growth using a solid growth medium. Faceted dissolution pits were first produced in a Si substrate using standard photolithographic techniques and Al metallization. Si was then evaporated onto the cold structure, depositing as amorphous material. Upon heating, the amorphous Si migrated through the solid Al and grew rapidly in the faceted pits, typically refilling them flush with the surrounding substrate. Evidence that the rapid growth occurs only while the amorphous Si is dissolving into the Al is presented.

Boatright, R. L.↗
NASA NTRS1977

Ionization induced damage in crystalline silicon

Close examination of the interaction of the energetic knock-on atoms with the local lattice environment reveals a damage mechanism which does satisfy the experimental data on proton irradiation of silicon. A proton-atom interaction with high energy transfer is considered where the proton path is delineated by a trail of ionization, and the silicon ion path is characterized by much heavier ionization terminating in a dense displacement cluster. At collision, many of the silicon electrons are stripped off, and the resulting energetic ion subsequently loses energy rapidly by Coulomb interaction with bound electrons. The rate of energy loss depends on the charge state and velocity of the knock-on ion. For ion energies in excess of 1 MeV, the intensity of ionization is sufficient to permit lattice atoms, stripped of their binding electrons, to reorient randomly before having an opportunity to recombine with electrons and re-establish the lattice. The path of a knock-on ion thus becomes a thin cylinder of amorphous material within the crystal. Amorphous silicon has a Fermi level closer to mid-band than does single crystal silicon, and a strong field therefore, results around this damaged region. The field produces a large depletion region, representing a very large capture cross section for minority carriers.

Meulenberg, A., Jr.↗
NASA NTRS1978

Preparation of amorphous ferromagnetic materials through containerless solidification

The work reported herein consists of: (1) the ground based experiments; (2) the analysis of the ground based specimens; (3) the flight experiment; (4) failure to melt analysis; and (5) recommendations and conclusions. The ground based experimental work yielded new results in terms of understanding the viscoelastic properties of ferromagnetic metallic glasses and the variation of viscosity through the glass transition temperature from metallic glass to crystalline solid. This last result was of importance in predicting what glass can be produced at lower quench rates.

Lord, A. E., Jr.↗
NASA NTRS1972

Investigation of superconducting interactions and amorphous semiconductors

Research papers on superconducting interactions and properties and on amorphous materials are presented. The search for new superconductors with improved properties was largely concentrated on the study of properties of thin films. An experimental investigation of interaction mechanisms revealed no new superconductivity mechanism. The properties of high transition temperature, type 2 materials prepared in thin film form were studied. A pulsed field solenoid capable of providing fields in excess of 300 k0e was developed. Preliminary X-ray measurements were made of V3Si to determine the behavior of cell constant deformation versus pressure up to 98 kilobars. The electrical properties of amorphous semiconducting materials and bulk and thin film devices, and of amorphous magnetic materials were investigated for developing radiation hard, inexpensive switches and memory elements.

Janocko, M. A.↗
NASA NTRS1975

Materials research at Stanford University

Research activity related to the science of materials is described. The following areas are included: elastic and thermal properties of composite materials, acoustic waves and devices, amorphous materials, crystal structure, synthesis of metal-metal bonds, interactions of solids with solutions, electrochemistry, fatigue damage, superconductivity and molecular physics and phase transition kinetics.

Source record↗
NASA NTRS1972

Investigation of phase-change coatings for variable thermal control of spacecraft

An investigation was conducted to determine the feasibility of producing a spacecraft coating system that could vary the ratio of its solar absorptance to thermal emittance to adjust automatically for changes in the thermal balance of a spacecraft. This study resulted in a new concept called the phase-change effect which uses the change that occurs in the optical properties of many materials during the phase transition from a crystalline solid to an amorphous material. A series of two-component model coatings was developed which, when placed on a highly reflecting substrate, exhibited a sharp decrease in solar absorptance within a narrow temperature range. A variable thermal control coating can have a significant amount of temperature regulation with the phase-change effect. Data are presented on several crystallite-polymer formulations, their physical and optical properties, and associated phase-change temperatures. Aspects pertaining to their use in a space environment and an example of the degree of thermal regulation attainable with these coatings is also given.

Kelliher, W. C.↗
NASA NTRS1979

Microcharacterization of 'Brownlee' particles - Features which distinguish interplanetary dust from meteorites

The internal structure and chemistry of six 'chondritic' dust aggregates collected by U-2 aircraft in the upper atmosphere were examined. Large variations in major element chemistry occurred over submicron distances in all aggregates suggesting that the aggregates represent material distinct from most meteoritic material. The crystals are usually coated with, or embedded in, an amorphous material which is indigenous to the aggregates; it is responsible for the lumpy, reentrant structure of whole aggregates in secondary electron images. These results also suggest that the dust aggregates constitute a source of extraterrestrial material different from meteorites.

Fraundorf, P.↗
NASA NTRS1979

Characterization of submicron matrix phyllosilicates from Murray and Nogoya carbonaceous chondrites

The combined techniques of high-resolution transmission electron microscopy and energy-dispersive X-ray analysis have been used to study dispersed, submicron phyllosilicates and the 'poorly characterized phase' of C2 matrix material. Morphologies and structure types observed are similar to terrestrial chrysotile. Distinctive morphologies and 7.3-A characteristic basal spacings combined with composition information rule out phyllosilicates other than serpentine group minerals as the predominant phyllosilicate material. The 'poorly characterized phase' is composed of chemically similar very fine-grained phyllosilicate and amorphous material. The observation of interstratified phyllosilicate material sheds additional doubt on compositional data which is not accompanied by structural data from the same particle.

Mckee, T. R.↗
NASA NTRS1973

Materials research

The research is reported concerned with materials for aerospace applications. Areas reported include: electrical properties of glasses, oxides and metals; structural and high temperature properties of crystalline and amorphous materials; and physical properties, and microstructure of materials.

Source record↗
NASA NTRS1990

Optical constants of solid methane

Methane is the most abundant simple organic molecule in the outer solar system bodies. In addition to being a gaseous constituent of the atmospheres of the Jovian planets and Titan, it is present in the solid form as a constituent of icy surfaces such as those of Triton and Pluto, and as cloud condensate in the atmospheres of Titan, Uranus, and Neptune. It is expected in the liquid form as a constituent of the ocean of Titan. Cometary ices also contain solid methane. The optical constants for both solid and liquid phases of CH4 for a wide temperature range are needed for radiative transfer calculations, for studies of reflection from surfaces, and for modeling of emission in the far infrared and microwave regions. The astronomically important visual to near infrared measurements of solid methane optical constants are conspicuously absent from the literature. Preliminary results are presented on the optical constants of solid methane for the 0.4 to 2.6 micrometer region. Deposition onto a substrate at 10 K produces glassy (semi-amorphous) material. Annealing this material at approximately 33 K for approximately 1 hour results in a crystalline material as seen by sharper, more structured bands and negligible background extinction due to scattering. The constant k is reported for both the amorphous and the crystalline (annealed) states. Typical values (at absorption maxima) are in the .001 to .0001 range. Below lambda = 1.1 micrometers the bands are too weak to be detected by transmission through the films less than or equal to 215 micrometers in thickness, employed in the studies to date. Using previously measured values of the real part of the refractive index, n, of liquid methane at 110 K, n is computed for solid methane using the Lorentz-Lorenz relationship. Work is in progress to extend the measurements of optical constants n and k for liquid and solid to both shorter and longer wavelengths, eventually providing a complete optical constants database for condensed CH4.

Khare, Bishun N.↗
NASA NTRS1980

Mineralogic and petrologic studies of lunar samples and meteorites

Experimental and thermodynamic research on the pressure temperature limits of the stability of the mineral assemblages found in pristine, spinel bearing lunar highland lithologies demonstrated the likelihood that the minerals originated in the lower stratigraphic levels of the primordial crust. The phase equilibrium in silicate solid/liquid systems of planetary importance were thermochemically interpreted in order to model the early formation of the crusts and maneles of Earth and Moon sized planets. The petrography and chemical composition of coarse grained gabbro, the chemical analysis and age dating of clasts from Apollo 16 breccia, the analysis of glass particles from Apollo 16 soil samples, the study of Allende and Mokoia meteorites as a source of information about events in the solar nebula, and the hydrothermal alteration of amorphous materials were also investigated. The capabilities of a model for addressing the problem of the origin of the Earth's moon by the disruptive capture mechanism are examined as well as models of the thermal evolution of hypothetical meteorite bodies. Progress in determining the composition of stony meteorite specimens collected at the Allan Hills site during the Antarctic field exploration is reported.

Wood, J. A.↗
NASA NTRS1979

Development of RF sputtered chromium oxide coating for wear application

The radio frequency sputtering technique was used to deposite a hard refractory, chromium oxide coating on an Inconel X-750 foil 0.1 mm thick. Optimized sputtering parameters for a smooth and adherent coating were found to be as follows: target-to-substrate spacing, 41.3 mm; argon pressure, 5-10 mTorr; total power to the sputtering module, 400 W (voltage at the target, 1600 V), and a water-cooled substrate. The coating on the annealed foil was more adherent than that on the heat-treated foil. Substrate biasing during the sputter deposition of Cr2O3 adversely affected adherence by removing naturally occurring interfacial oxide layers. The deposited coatings were amorphous and oxygen deficient. Since amorphous materials are extremely hard, the structure was considered to be desirable.

Bhushan, B.↗