Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Alternative Relativity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Thermal Protection Supplement for Reducing Interface Thermal Mismatch

A thermal protection system that reduces a mismatch of thermal expansion coefficients CTE between a first material layer (CTE1) and a second material layer (CTE2) at a first layer-second layer interface. A portion of aluminum borosilicate (abs) or another suitable additive (add), whose CTE value, CTE(add), satisfies (CTE(add)-CTE1)(CTE(add)-CTE2)<0, is distributed with variable additive density,.rho.(z;add), in the first material layer and/or in the second material layer, with.rho.(z;add) near the materials interface being relatively high (alternatively, relatively low) and.rho.(z;add) in a region spaced apart from the interface being relatively low (alternatively, relatively high).

Stewart, David A.↗
NASA NTRS1980

Potential problems relative to TDRS/IUS tilt table elevation with failed VRCS

Operational concerns and preliminary solution alternatives related to elevating the inertial upper stage/tracking and data relay satellite (IUS/TDRS) with a failed orbiter vernier reaction control system (VRCS) are presented. Problems arise from the combination of TDRS thermal constraints and tilt table constraints (the primary reaction control system (PRCS) cannot be used to hold attitude while the tilt table is being elevated), and the problems are compounded by the minimum PRCS attitude deadband. The potential solution options are affected by the launch window, flight profile, crew procedures, vehicle capability and constraints, and flight rules.

Bell, J.↗
NASA NTRS2001

Alternate Forms of Relative Attitude Kinematics and Dynamics Equations

In this paper the alternate forms of the relative attitude kinematics and relative dynamics equations are presented. These developments are different from the earlier developments that have been presented in other publications. The current forms of equations have the advantage of being simpler than earlier ones. These equations are applied in developing the necessary kinematics and dynamics for relative navigation in formation flying and virtual platforms. These equations also have application in the implementation of nonlinear full state feedback and nonlinear output feedback control for large attitude angle acquisition and tracking. This paper presents simulations from such a full state feedback control application.

Xing, Guang Q.↗
DOE OSTI2021

Development of heavy-duty vehicle representative driving cycles via decision tree regression

Previously, researchers who developed representative driving cycles mainly focused on light-duty vehicles and only considered vehicle speed and related derivations. In this paper, we propose a novel approach to develop representative cycles for heavy-duty vehicles. By implementing decision tree regression (DTR) to the Fleet DNA on-road vehicle data, a broader set of metrics, such as engine power and fuel consumption, can be used for more robust cycle development. Additionally, the influence of each metric on the regression target is also accounted for by a weighted number derived through the DTR to enhance the representativenss of the developed cycle. As case studies, we applied the proposed method to five heavy-duty vocations (drayage, long haul, regional haul, local delivery, and transit bus) and derived the most representative cycle, as well as four extreme cycles (maximal energy consumption, maximal power-weighted work, maximal fraction of high speed, and minimal fuel economy) to advance the related alternative powertrain design.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Reconstruction of 3D Concrete Microstructures Combining High-Resolution Characterization and Convolutional Neural Network for Image Segmentation

After water, concrete is the second most used material in the world. Concrete’s forming adaptability and low-cost constituents make it a predominant material used in the construction of civil infrastructures in nuclear power plants such as concrete biological shields, containment buildings, turbine buildings, fuel handling and storage buildings, underground piping for cooling, cooling towers, and so on. Depending on environmental and operating conditions, these passive structures are subject to time-dependent phenomena that can either enhance (e.g., continued hydration) or degrade concrete’s structural performance. Unlike components such as the reactor pressure vessel and the primary circuit, concrete composition varies regionally because it is manufactured using local aggregates and cement. Hence, concrete performance metrics over time cannot be derived confidently using empirical relations. Alternatively, the specific characteristics of the local concrete constituents and their assemblage in concrete must be considered.

36 MATERIALS SCIENCE↗
NASA NTRS1977

Transonic performance of an auxiliary airflow system for axisymmetric inlets

A large-scale model of an axisymmetric inlet with a centerbody auxiliary airflow system has been tested in the wind tunnel at transonic speeds. The auxiliary system allows additional airflow (other than in the main duct formed by the cowl and translating centerbody) to pass through the centerbody of the inlet and combine with the main duct airflow on its way to the engine face. The results of the tests are presented, and the inlet performance is compared to a closely related alternative inlet with a 'traveling' boundary-layer bleed system which precludes the use of a centerbody auxiliary airflow system. The comparison shows that the auxiliary airflow inlet can supply 7.7% more engine face airflow at Mach number 1.0 and is 26% shorter than the traveling bleed inlet. Even though maximum transonic airflow was not achieved at a comparable engine face mass-flow ratio of 0.580, a total-pressure distortion of 0.10 and a total-pressure recovery of 0.985 were achieved for the auxiliary airflow inlet while a recovery of only 0.965 was achieved for the traveling bleed inlet.

Sorensen, N. E.↗
NASA NTRS1981

Transportation systems evaluation methodology development and applications, phase 3

Transportation systems or proposed changes in current systems are evaluated. Four principal evaluation criteria are incorporated in the process, operating performance characteristics as viewed by potential users, decisions based on the perceived impacts of the system, estimating what is required to reduce the system to practice; and predicting the ability of the concept to attract financial support. A series of matrix multiplications in which the various matrices represent evaluations in a logical sequence of the various discrete steps in a management decision process is used. One or more alternatives are compared with the current situation, and the result provides a numerical rating which determines the desirability of each alternative relative to the norm and to each other. The steps in the decision process are isolated so that contributions of each to the final result are readily analyzed. The ability to protect against bias on the part of the evaluators, and the fact that system parameters which are basically qualitative in nature can be easily included are advantageous.

Kuhlthau, A. R.↗
NASA NTRS1991

Man/Machine Interaction Dynamics And Performance (MMIDAP) capability

The creation of an ability to study interaction dynamics between a machine and its human operator can be approached from a myriad of directions. The Man/Machine Interaction Dynamics and Performance (MMIDAP) project seeks to create an ability to study the consequences of machine design alternatives relative to the performance of both machine and operator. The class of machines to which this study is directed includes those that require the intelligent physical exertions of a human operator. While Goddard's Flight Telerobotic's program was expected to be a major user, basic engineering design and biomedical applications reach far beyond telerobotics. Ongoing efforts are outlined of the GSFC and its University and small business collaborators to integrate both human performance and musculoskeletal data bases with analysis capabilities necessary to enable the study of dynamic actions, reactions, and performance of coupled machine/operator systems.

Frisch, Harold P.↗
NASA NTRS1994

Detection of signature consistent with cosmological time dilation in gamma-ray bursts

If gamma ray bursts are at cosmological distances-as suggested by their isotropic distribution on the sky and by their number-intensity relation-then the burst profiles will be stretched in time, by an amount proportional to the redshift, 1 + Z. We have tested data from the Compton Gamma Ray Observatory's (CGRO's) Burst and Transient Source Experiment (BATSE) for such time dilation. Out of 590 bursts observed by BATSE, 131 bursts were analyzed; bursts with durations shorter than 1.5 s were excluded. We used three tests to compare the timescales of bright and dim bursts, the latter, on average, being more distant than the former. Our measures of timescale are constructed to avoid selection effects arising from intensity differences by rescaling all bursts to fiducial levels of peak intensity and noise bias. (1) We found that the total rescaled count above background for the dim burst ensemble is approximately twice that for the brightest bursts-translating into longer durations for the dim bursts. (2) Wavelet-transform decompositions of the burst profiles confirmed that this dilation operates over a broad range of timescales. (3) Structure on the shortest timescales was examined using a procedure which aligns the highest peaks of profiles from which the noise has been optimally removed using a wavelet threshold technique. In all three tests, the dim bursts are stretched by a factor of approximately 2 relative to the bright ones, over seven octaves of timescale. We calibrated the measurements by dilating synthetic bursts that approximate the temporal characteristics of bright BATSE bursts. Results are consistent with bursts at BATSE's peak-flux completeness limit being at cosmological distances corresponding to Z approximately equal to 1, and thus with independent cosmological interpretations of the BATSE number-intensity relation. Alternative explanations of our results, arising from the nature of physical processes in bursts, are still possible.

Norris, J. P.↗
NASA NTRS2004

Geopositional Accuracy Assessment of EarthSat Geocover Landsat Orthorectified Imagery

NASA purchased EarthSat GeoCover orthorectified Landsat imagery of global land areas covering three historical frames: (1) mid-1970's imagery from the Landsat Multispectral Scanner (MSS); (2) late 1980's-early 1990's imagery from the Landsat Thematic Mapper (TM); and (3) year 2000 imagery from the Landsat Enhanced Thematic Mapper Plus (ETM+). Because of the distinct time frames covered by these datasets, this imagery is valuable to land cover change research. Because geopositional accuracy plays a critical role in this area of scientific research. NASA performed an independent assessment of the geopositional accuracy of each EarthSat dataset using an independent set of government-provided ground control points (GCPs). These points were instrumental in the geopositional accuracy assessment of the TM imagery. Because of the orthorectification processes of the MSS imagery and the MSS pixel size, the aforementioned GCPs could not be used, and an alternate relative assessment procedure using the previously validated TM imagery as a "truth" dataset was used for the MSS data. Finally, the ETM data specification was defined in both an absolute sense with respect to ground coordinated and relative to the previously validated TM dataset. Therefore, two separate methods were used in validating the ETM-data. Results of the NASA independent assessments showed that the accuracies of the EarthSat GeoCover datasets met the defined specifications or were within the error and limitations of the verification methods employed.

Smith, Charles M.↗
NASA NTRS2018

Tests of Gravitational Symmetries with Pulsar Binary J1713+0747

Symmetries play a fundamental role in modern theories of gravity. The strong equivalence principle (SEP) constitutes a collection of gravitational symmetries which are all implemented by general relativity. Alternative theories, however, are generally expected to violate some aspects of SEP. We test three aspects of SEP using observed change rates in the orbital period and eccentricity of binary pulsar J1713+0747: (1) the gravitational constant’s constancy as part of locational invariance of gravitation; (2) the universality of free fall (UFF) for strongly self-gravitating bodies; (3) the post-Newtonian parameter ˆα3 in gravitational Lorentz invariance. Based on the pulsar timing result of the combined data set from the North American Nanohertz Gravitational Observatory and the European Pulsar Timing Array, we find G˙ /G = (−0.1 ± 0.9) × 10−12 yr−1, which is weaker than Solar system limits, but applies for strongly self-gravitating objects. Furthermore, we obtain an improved test for a UFF violation by a strongly self-gravitating mass falling in the gravitational field of our Galaxy, with a limit of |Delta| < 0.002 (95 per cent C.L.). Finally, we derive an improved limit on the self-acceleration of a gravitationally bound rotating body, to a preferred reference frame in the Universe, with −3 × 10−20 < ˆα3 < 4 × 10−20 (95 per cent C.L.). These results are based on direct UFF and ˆα3 tests using pulsar binaries, and they overcome various limitations of previous tests of this kind.

W W Zhu↗
NASA NTRS1988

A test of alternative Caribbean plate relative motion models

The new NUVEL-1 data set for global relative plate motions is used here to discriminate between the two prevailing models for Caribbean plate motion. One model, by Jordan (1975), assumes that North America-Caribbean motion is reflected by the spreading rate inferred from magnetic anomalies at the Cayman Spreading Center and the azimuths of nearby transforms. The other model, by Sykes et al. (1982), uses rates and azimuths inferred from the geometry of the Lesser Antilles Wadati-Benioff zone. Overall, it is found that the data fit the Jordan geometry better, that the data used in global plate motion models are more suitable than rates and azimuths inferred from the geometry of the Wadati-Benioff zone for determining relative motions, and that incorporation of all relevant plate boundaries is essential.

Stein, Seth↗
NASA NTRS2011

Passive Vaporizing Heat Sink

A passive vaporizing heat sink has been developed as a relatively lightweight, compact alternative to related prior heat sinks based, variously, on evaporation of sprayed liquids or on sublimation of solids. This heat sink is designed for short-term dissipation of a large amount of heat and was originally intended for use in regulating the temperature of spacecraft equipment during launch or re-entry. It could also be useful in a terrestrial setting in which there is a requirement for a lightweight, compact means of short-term cooling. This heat sink includes a hermetic package closed with a pressure-relief valve and containing an expendable and rechargeable coolant liquid (e.g., water) and a conductive carbon-fiber wick. The vapor of the liquid escapes when the temperature exceeds the boiling point corresponding to the vapor pressure determined by the setting of the pressure-relief valve. The great advantage of this heat sink over a melting-paraffin or similar phase-change heat sink of equal capacity is that by virtue of the =10x greater latent heat of vaporization, a coolant-liquid volume equal to =1/10 of the paraffin volume can suffice.

Knowles, TImothy R.↗
NASA NTRS2019

Study network-related optimization problems using quantum alternating optimization ansatz

Network-related connectivity optimization problems are underlying a wide range of applications and are also of high computational complexity. We consider studying network optimization problems using two types of quantum heuristics. One is quantum annealing, and the other Quantum Alternating Operator Ansatz, an extension of the Quantum Approximate Optimization Algorithms for gate-model quantum computation, in which a cost-function based unitary and a non-commuting mixing unitary are applied alternately. We present problem mappings for problems of finding the spanning-tree or spanning-graph of a graph that optimizes certain costs, and a variant that further requires the spanning-tree be degree-bounded. With quantum annealing, all constraints are cast into penalty terms in the cost Hamiltonian, and the solution is encoded as the ground state of the Hamiltonian. We provide three mappings to the quadratic unconstrained binary optimization (QUBO) form, compare the resource requirements, and analyze the tradeoffs. For QAOA, we give special focus on the design of mixers based on the constraints presented in the problem, such that the system evolution remains in a subspace of the full Hilbert space where all constraints are satisfied. In the spanning-tree problem, one such hard constraint is that a mixer applied to a spanning-tree needs also be a spanning tree. This involves checking the connectivity of a subgraph, which is a global condition common for most network-related problems. We show how this feature can be efficiently represented in the mixer in a quantum coherent way, based on manipulation of a descendant-matrix and an adjacent matrix. We further develop a mixer for the spanning-graphs based on the spanning-tree mixer.

Zhihui Wang↗
DOE OSTI2024

Sister Rod Destructive Examinations (FY23) Appendix F: Cyclic Integrated Reversible-Bending Fatigue Tests

Spent nuclear fuel (SNF) assemblies must be shipped to other sites for processing and disposal. During shipment, the fuel is typically oriented horizontally, and the fuel rods are subject to periodic alternating loads related to the movement of the vehicle that results in alternating bending of the SNF fuel rods. The number of bending cycles is related to the length of the shipping route, with longer routes producing more cycles. Because it is well-known that cyclic loads can produce failures, even when the stress and strain imposed are below the material’s yield point, investigation of the SNF’s fatigue behavior is prudent. This report discusses the results of fatigue testing conducted at Oak Ridge National Laboratory (ORNL) using the Cyclic Integrated Reversible-Bending Fatigue Tester (CIRFT) created by the US Department of Energy Office of Nuclear Energy for the High Burnup Spent Fuel Data Project and its sister rods. The results of the tests are compared with results obtained over the last decade using the same CIRFT for the US Nuclear Regulatory Commission (NRC).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRSDate not supplied

IEIR2019 + NASA Aeronautics Overview

Summarizing the chapters in an existing ICAO document (# 10127) on alternative configurations and approaches, and public NASA aeronautics directions relative to alternative configurations relevant to international civil aviation. all content is drawn from publicly available info.

Aviation↗